@decorartrigueros Different factories may have different parameter. You should refer to your machine manufacturer for help. It's important for DSP users to write down the default setup in case you may have to format the DSP in some case.
@decorartrigueros 【translated by google】 Fábricas diferentes pueden tener diferentes parámetros. Usted debe consultar a su fabricante de la máquina en busca de ayuda. Es importante para los usuarios de DSP para escribir la configuración por defecto en caso de que tenga que formatear el DSP en algunos casos.
Hi liu xin I have a problem with my router I wanted to ask a question, use the dsp driver like the one in your video but I put a source point x 0.0, and 0.0, z 0.0 and after a while work there is no return to the point Of origin Moves know how to solve it thank you very much
Hello Mr Lui Xim , Can you tell me how to install a Rich Auto B51s controller DSP to replace the DSP 0501 ? My cnc is the 6090 from redsail . thank you
Hola Liu Xim, tengo un router Cnc de 1200/1200/250 que hago cuando X -hard limit triaged, stop to reboot, delete to adjust X position???? Saludos Robert W
Hello sir, I have Xuda 6090 and I use XP to load the cnc files. I want to pass to win10 and the console isn't recognized. Can you help me with an win10 driver?
Good day. may I ask how to setup stepper motor output. I have Oriental Stepper motor and I want to use it in my project using RICHauto A11 can you please help me how to set it up. it is a 2- Pluse mode motor. Thank you..
Hi friend my machine spindle run engraving around one hour hour it stop by itself and show on display E004 and sometimes the machine restarted and on display of inverter show E006, so what that problem and how can I fix it? please help me
Sir I am facing a problem an error on DZB 280 SERIES FUILING INVERTER DRIVE ,the problem code is E020- THE MACHINE HAS REACHED THE MAXIMUM RUNNING TIME.... HOW TO SOLVE IT PLEASE HELP
CLEAR ENGLISH AND DEMO .. I HAVE A PROBLEM WITH MY PLASMA DSP. WE GET THE FOLLOWING MESSAGE BEFORE WORK ENDS "CUTTING OFF THE POWER TO RESTART....." CAN YOU ADVISE WHY WE KEEP GETTING THIS MESSAGE OFTEN .. AND HOW TO CORRECT THIS SITUATION?
Jamal Bahormoz I had the same problem when I destroyed a limit switch. In this case you should turn off menu switches until do not change with new sensor
usually the DSP will ask you this when it boots up. If it doesn't then this function doesnt work on your DSP. DSP is an economic solution for CNC. Don't expect too much on it.
@decorartrigueros
Different factories may have different parameter.
You should refer to your machine manufacturer for help.
It's important for DSP users to write down the default setup in case you may have to format the DSP in some case.
@decorartrigueros
【translated by google】
Fábricas diferentes pueden tener diferentes parámetros.
Usted debe consultar a su fabricante de la máquina en busca de ayuda.
Es importante para los usuarios de DSP para escribir la configuración por defecto en caso de que tenga que formatear el DSP en algunos casos.
keep it up nice explains
mi maquina es TK-1325 with 3.5kw Air cooling spindle, tu has grabado video de mi maquina. configuración DSP
Hi liu xin I have a problem with my router I wanted to ask a question, use the dsp driver like the one in your video but I put a source point x 0.0, and 0.0, z 0.0 and after a while work there is no return to the point Of origin Moves know how to solve it thank you very much
Sir please make an video of dsp 0501 breakpoint. And how to start from breakpoint
Hello Mr Lui Xim , Can you tell me how to install a Rich Auto B51s controller DSP to replace the DSP 0501 ? My cnc is the 6090 from redsail . thank you
Hola Liu Xim, tengo un router Cnc de 1200/1200/250 que hago cuando X -hard limit triaged, stop to reboot, delete to adjust X position????
Saludos Robert W
after setting z axis what have to i do?.
my knife penetrated to the table. please help me
❤
Hello sir, I have Xuda 6090 and I use XP to load the cnc files. I want to pass to win10 and the console isn't recognized. Can you help me with an win10 driver?
Good day. may I ask how to setup stepper motor output. I have Oriental Stepper motor and I want to use it in my project using RICHauto A11 can you please help me how to set it up. it is a 2- Pluse mode motor. Thank you..
Hi friend my machine spindle run engraving around one hour hour it stop by itself and show on display E004 and sometimes the machine restarted and on display of inverter show E006, so what that problem and how can I fix it? please help me
Buenas en que archivo debo guardar programa yo estoy usando mastercam x5
Hello lui xin right now I'm using this 0501 i want know how to change spendal & machine speed
I have another question: how do I calculate manual movement of rotary axis from DSP ? Should I calcolate chuck perimiter ?r*2*3,14?
***** perimeter not perimiter, sorry
Sir I am facing a problem an error on DZB 280 SERIES FUILING INVERTER DRIVE ,the problem code is E020- THE MACHINE HAS REACHED THE MAXIMUM RUNNING TIME....
HOW TO SOLVE IT PLEASE HELP
Hello... i need the dsp controller software, i deleted it by accident. Any help?
comment fait le marché acier sur le motif
Fantastic very fantastic
My spindle speed.... S2 6000rpm, S3 9000rpm, S4 12000rpm etc. But S1 000rpm / off.... Why so....??
Please teach me
Sir 0501 DSP save break options dell me
can you tell me haw can i reinitialise z axis thanks
Do you have a firmware dsp0501
Hi, do you have the firmware for this DSP0501? I've bricked mine..
Do u have sqnc 0501 model?
CLEAR ENGLISH AND DEMO ..
I HAVE A PROBLEM WITH MY PLASMA DSP. WE GET THE FOLLOWING MESSAGE BEFORE WORK ENDS "CUTTING OFF THE POWER TO RESTART....."
CAN YOU ADVISE WHY WE KEEP GETTING THIS MESSAGE OFTEN .. AND HOW TO CORRECT THIS SITUATION?
Jamal Bahormoz I had the same problem when I destroyed a limit switch. In this case you should turn off menu switches until do not change with new sensor
I install DSP controller but i have no idea to resume work when power failure. PLz help for resume work setting after power failure. thx
usually it should ask you to save the break point when you power it up next time. if not then you're unlucky. do it all over again then.
@@LIUXIN plz explain , i donot understand sir
how i save break point
plz explain sir
usually the DSP will ask you this when it boots up. If it doesn't then this function doesnt work on your DSP. DSP is an economic solution for CNC. Don't expect too much on it.
Please call me +919622534222
Menc podrias hacer video TK-1325 gracias
comment fait le match a arrière sur le motif
Hello sar
03224569872 plz call me
Sir 0501 DSP save break options help
Sqnc 0501 break point problem? Did u solve it?
home is issue
How to the auto go home end don't go home
R u using 0501 dsp?
Hindi me
هيل جدا