Cecchini Stucco Design - BASECOAT APPLICATION
HTML-код
- Опубликовано: 11 сен 2024
- In this 1st episode, Mike Cecchini shows you how to properly base-coat and mesh a wall, when working by yourself.
For more expert tips and solutions to common problems when dealing with stucco, please subscribe.
Thanks for watching.
www.cecchinistucco.com
Best video! Great instruction!
another awesome video Mike, theres always haters, God Love ya my ol friend!!
You can't play beeny Hill music without some flowerpower girls Boss🤙🏼
I see a Tarp, must be close or under 40 degrees. Your mud was really thin but overall good Video brother. Keep slinging that mud and creating good content ✌🏻
Good job brother 👏 👍 thank you
Great video, New Sub!
Good teacher I tell yall
After watching some of these guys I've decided to raise my prices by 40%. Can't believe what people get away with
Make a video then shit talker. There's illegal crews that will do it for 75%if what you charge anyway.
Good luck at the soup line
You frogot to use gloves
Hi Mike, I have a question for you about the basecoat: what is right mix for the base coat ? Can I do my own mix with portland, and san ? if so what you recommend is the right mix ? Do you use lime at all for the base coat or not ?
Thank you very much Mike for your help !!
Basecoat comes in a drymix and wetbase. For begginers I would recommend drymix just add water accordingly to skill level of plasterer. I would not recommend trying this if you have no experience as it will cost you far more to repair than to hire from scratch. Courtesy of plast-all stucco systems Inc.
Different system
It just looks easy but one needs quite a bit of peactice
What products are need for a smooth finish? What base coat and what finish coat?
WOW an american man doing this kind work WOO
Listen to the accent. Definitely Canadian!
See the mesh but no color of meshes
Am going to try this
Why did you not backwrap the edges of the EPS???
Very professional work.
what is tha diffeent of dryvit primus in stucco
Nice work mike 👍👍👍
No back wrap ??? Otherwise good demonstration of doing base coat.
I apply a consistent coat on the eps foam before applying the mesh, never leave thick spot because if you do, you will end up trying to squeeze it out under the mesh. So cover the eps foam with a nice consistent coat, apply your mesh and apply another coat to cover up the mesh. I do not apply thick because I always come back for a skim coat after it cures.
How to trowel video nice, thank you.
Hi what do you use adtivitive with cement? Ratio adtivitive? Tks
The installation is not correct; There should be a back-wrap of mesh at terminations.
I noticed the windows weren't back wrapped
Yes STO tell u to back wrap at soffits and bottom and window
@@warrenbrecht1113 All EIFS companies require to be back-wrap
@@MrUnlimitedrobert
I don’t get why drainage plane is required. EIFS is the drainage plane.
If you take care of your window, door, and roof flashing details it should work fine.
What’s back wrap? I’m a Brit mesh over the corners?
Why do not tell use the spec for the fiberglass mesh? How can we know what to buy?
Madera Roja de la Secoya the supplier that sells you the product should tell you what kind and how many square feet you get to the materials and ever prefer you to some professional people that live doing this type of work. if you would like to know more about what kind and would like to talk to a supplier. just let me know
I am using sto standard mesh 48'' wide comes in 1 rool that covers 600 sq ft
Madera Roja de la Secoya usually well this is how our union jobs are say you use sto or senergy or whatever you use all the material from waterproof to foam to mesh to base and or finish usually all same compamy
what is the substrate?
Im a union plaster and i wouldn’t use my trowel to even out the base coat I would use a slicker and this system I would do a two coat system due to weakness of one coat of base coat
This is EIFS guy
Slicker is for cement
2coats as well is for cement(scratch&double)
Always 1 coat of base over mesh
Im a union plasterer too
Where u from?
averageguy 76 California local 300 how about you?
Well everyone has their own way of working we normally do two coats of base coat and we also use a slicker makes the job a little bit more easier for us
Local 5 nj/philly
So u use an edger on basecoat?
Lol never heard of that
Cement yeah...u edge to the beads but over foam? Nah skicker stays in the truck on eifs jobs
Juan Montano shut up Juan basecoat is rock hard after it cures
Eagles Rule don’t tell me to shut up it’s just a way that we do things here in my union. It is not rock hard bro cause it still cracks but y
Home made scoop whid hockey stick and bucket lid
Great video, maybe all the negative Nancy’s should post a video themselves so we can critique them
What's the name of that net and where can I buy it?
Fiberglass stucoo mesh
Tidak ada terjemahan jadi say susah mengerti
What stucco mix are you using?
Base Coat
Looks like sto by the color of the mesh. A fine product. I personally use total wall.
Now a days you double wrap corners back wrap everything.
Is this STO ,BTSB base coat???
Applicators such as this fellow are the reason there was a sharp decline in EIFS projects over the past ten years or so. You cannot cheat the system and expect it not to fail: No backwrap at top of wall, no backwrap at window openings, no backwrap at wall penetrations, mesh was barely overlapped at the window opening (1" or less), did not double wrap corner at window opening.
It's like building failures into the wall.
As an industry we need to go back to training and certifying EIFS applicators or it may never reach it's market potential again.
Can I don't use mesh interior house?
I have been doing this trade for 18 years and don't like back wrapping and there are many reasons for that i like wrapping from outside going in around windows. When you have the back wrap mesh install when sanding the corners you always cut through or damage the wrap making it hard to get a nice edge. Second when you base coating the wall base coat that falls get stuck in the mesh which make it hard to clean so you have to cut it off and wrap it from outside going in. The point is if your styrofoams is not install strong snd ry right then back wrap won't hold it secure
Hawkin Trowelin you both idiots lol
Just take care of the flashing details at openings and roof and you’ll be fine.
No need to back wrap or tyvek drain wrap and all that stuff
no back rap at top ..sorry
Rubber float is no necessary?
we're is your. sto back rap around Windows. an top of wall
If you look a little closer you will see that I am using pre-back wrapped strips that I buy from my molding supplier , you can get them in 2''- 3''- 1 1/2''
@@cecchinistucco9443 how well does that pre back wrapped foam work arounr flaired out window flanges . Can't rasp it after it's been mudded
peice of advice from one stucco guy to the other... u should always wear cotton gloves , once that cement dries on ur hand it's gonna be hard to get off
Cecchini Stucco someone punched holes through out my dryvit system where do i buy the materials from to get it fixed?
Nah basecoat washes off easy with skin to skin rubbing in water. The worst to get off is liquid vapor barrier. In this case he is using Sto so it’s gold coat. Don’t let that dry in your beard. Talk about painful getting it out
That thing you get your mud out of Bbuckets. that thing would. wear me out
Still waiting for the incredible Mr applewhite videos....
Dude you would cost me money
making more money. with no back rap in the way an also weak edges Mr professor
Look a little closer buddy i'm using pre-backwrapped strips, you think i'd cheat my own house?
@@cecchinistucco9443 I wouldn't have a hack like you plaster my dog house.
I hate when stupid people try to teach something when they can barely do it themselves.
your a fkn idiot! Mike is one of the best taught by his father who WAS the best!!
@@donkinbuck 😂😂😂
Yet.HAVE I SEEN THESE CLOWNS TAKE ANYTHING OFF THE FRONT OF THERE HAWK.