It shouldn't be too hard! Instead of the computer vision based precision landing, you'd probably want to change to velocity commands- but definitely feasible!
Awesome! Thanks for sharing your work. Is it possible to use GPS coordinates to build multiple waypoints on a route that’s not “directly” A to B? We can’t go BVLOS obviously - but as a proof of concept for a longer UAS delivery route.
With which message did you convey the information obtained by the camera to the autopilot? I thought of using the "LANDING_TARGET" message. Am I on the right track?
is it possible to use only the raspberry pi without a navio2 shield? I am doing my thesis on drone construction and I'm trying to limit myself from using many off-the-shelf circuit as i possibly can. I just wanted to code the necessary functions that navio2 may offer.
Hi there @xgia01! Good question. You could script this mission to not land if the target isn't seen. The way I have the script written is to continue with the land even if it doesn't see the marker.
Good question, Stefan! I certainly do. I am walking with a RC controller that can override the script if needed, and if the RC fails I can command the drone to land via the MissionPlanner ground control station connection. Safety first!
Good question, puvee. You can definitely connect the RPI 4B to the Pixhawk. In fact, we even have a drone just like this at the drone dojo at deals.dojofordrones.com/the-ultimate-project-drone
From someone like myself who is just getting involved….. very nice! Thank you for making this.
From proof of concept to production. Great job 👏
Appreciate that @trainingtechlabs!
He plz I want your help in this project. I want to do it in my final year engineering.
I gave a good chuckle at the end when your eating the taco and said.... Mhmmm
amazing project man. We are building similar project (air delivery systems) with quite a few alterations.
thumbs up for the ending. also an amazing project.
Thanks Justin S!!! A ton of hours were put into finally being able to eat the deliverable taco, so glad you enjoyed it!
You program and write your own script in pc!!!! Amazing man!!!!! I like it !!!!
Can you show us how to get 3 doritos locos tacos and a baja blast delivered?
What cam did you used?? Does the cam has object tracking features???? Tnx
This is sick man.🤓
Wow.. really great
Thanks Umar!!
great vid! what drone did you use for the delivery? was it a custom built one or did you buy it online?
How hard would it be to extend this to a moving platform i.e. a drone ship?
It shouldn't be too hard! Instead of the computer vision based precision landing, you'd probably want to change to velocity commands- but definitely feasible!
which camera lens did you use to focus aruco boards? and also do I have to recalibrate the camera in every usage?
amazing
Hello!
Do you have any ideea how much would the kit cost of I want to build one to deliver food 1.5km distance for my grandpa?
That’s really nice!! Thanks for sharing
No problem Freddy! Glad you enjoyed it :)
Awesome! Thanks for sharing your work.
Is it possible to use GPS coordinates to build multiple waypoints on a route that’s not “directly” A to B? We can’t go BVLOS obviously - but as a proof of concept for a longer UAS delivery route.
how to control gripper
thank you very much
You are the man sir.
Thanks alot! But why are some videos set private on the drone build playlist?
Hi there Nerd!! This is because the videos that are private are for our courses at the Drone Dojo
@@thedronedojo if I purchase your course, so will I able to make that completely
With which message did you convey the information obtained by the camera to the autopilot? I thought of using the "LANDING_TARGET" message. Am I on the right track?
Why do you need the visual mode to land? Are target coordinates too unprecise?
Please tell how to make this drone... explain please
How can we get the target altitude upto 300m? Does it require any other component?
Wow nice work. Do you have a series on the code you used in python and how were you able to pass the code to the drone ?
is it possible to use only the raspberry pi without a navio2 shield? I am doing my thesis on drone construction and I'm trying to limit myself from using many off-the-shelf circuit as i possibly can. I just wanted to code the necessary functions that navio2 may offer.
can i work with raspberry pi 3 ??
Definitely! Just make sure to put a heat sink on the CPU!
ufo @ 4.49 on the left a white thing very rapid. lol mission complete :) amazing ;)
does this hurt the taco
You are amazing
Thank you Arshdeep
I have a problem connecting to dronekit in real environment. Can you help with this issue?
I would start by changing the ArduPilot version. If you are on the Navio2 then go to any ArduCopter version in the 4.0.'s
That's unsanitary. Lol. Great job man
Hi , good video, it still lands if it doesn't find the target?
I what use this for search and delivery mission
Hi there @xgia01!
Good question. You could script this mission to not land if the target isn't seen. The way I have the script written is to continue with the land even if it doesn't see the marker.
@@thedronedojo can i ask you where to find some document or tutorial to learn that?
Have you used telemetry in this drone??
how can I buy this drone?
How do you interact with the drone via python and without a cord?
Looks like he's using a personal hotspot with raspi connected and ssh's into it via the local network
Awesome!
Do you have a way to manually intervene if something goes wrong ?
Good question, Stefan! I certainly do. I am walking with a RC controller that can override the script if needed, and if the RC fails I can command the drone to land via the MissionPlanner ground control station connection. Safety first!
Hey! how can I reach you?
Can it deliver marshmallows?
Can I connect pixhawk to raspberry pi 4b to control drone
Did u achieve correct answer for your question? Bcz ı need to learn what kind of raspberry pi to use with pixhawk 4
Good question, puvee. You can definitely connect the RPI 4B to the Pixhawk. In fact, we even have a drone just like this at the drone dojo at deals.dojofordrones.com/the-ultimate-project-drone
I would recommend the RPI 4B
@@thedronedojo Is rpi 3 b enough for your project?
👍 ok
Is Noah cool?
can we do this with pixhawk 4?
Hi there Anish, you can definitely do it with the pixhawk 4!
can u help me with my project ????
can u share the code? please