Это видео недоступно.
Сожалеем об этом.
How To Make A Springtrap Cosplay Head from Five Nights at Freddy's 3!
HTML-код
- Опубликовано: 16 июл 2023
- Welcome to the full tutorial on how to make a Springtrap cosplay head from Five Night's at Freddy's! I listened to my amazing subscribers, and tried to make the perfect tutorial for y'all to follow and make the best Springtrap head you can!
I also constantly get asked this question: "how do you see through your masks?" I had to make an entire video on it, but still get asked the question. Basically, the eyes you see in the video are what I call "'show eyes". They have Velcro on the bottom so I can take them out and replace them with see through eyes. To make see through eyes, use mesh instead of white paint. I just use those eyes as display or show eyes to make the costume look more realistic. Hope this helps
List of materials:
Remember to check places like thrift stores, small businesses, or garage sales for any of these materials so you can save more money and help out small businesses
Project foam: www.joann.com/...
Fabric: Olive Green Anti-Pill Fleece. Make sure it's stretchy. Available at Walmart, Joann's, or a fabric store near you
Brad Pins:
Plastic Ornaments for Eyes/Eyelids: Sizes vary based on head size. Available on Amazon, or at your local store come holiday season.
Plastic Mesh Canvas for Jaw Structure: www.michaels.c...
Metal wires: www.michaels.c...
Colored Wire (You may be able to use stuff around your house, but here's a cheap alternative):
Black Rubber Tubes for Ears (Sizes may vary based on head size): www.lowes.com/...
Oven Bake Clay for Teeth:
Fake Skin (although fairly cheap, I recommend using peach colored felt that you can paint on, just based upon availability):
- Fake Skin: www.amazon.com...
- Peach Colored Felt: www.michaels.c...
#cosplay #diy #fivenightsatfreddys #fnaf #costume #gaming #youtube #craft #tutorial #howto
I just finished making a Springtrap costume for my Grandson. I am a 77 year old Grandmother and your RUclips videos were so helpful.
That's great to hear! I'm glad I can help 😁
W
Your grandson is so lucky
You’re an awesome grandma!
AHAHAHA YOU'RE THE BEST
I made my springtrap helmet gold and just made it as dirty looking as possible because it just makes sense to me
Nice! Whatever works for you is perfect 😁
i’d love to see it! if nots that’s fine
Bling trap
@@erikarsov4365lol
@@erikarsov4365BEING CHELLIN
ive been a FNAF fan since i was 3 years old and im now 11... yes ''too young'' not really i enjoyed it. but the best thing is that ive never made anything about FNAF... my parents are still upset about me liking fnaf and watching the movie so having an entire suit of the guy who killed innocent children and died in this suit is going to be the final straw for them but i really dont care and im going to waste their money on something that i need but dont need at the same time. thank you so much for showing me this creation this MASTERPIECE now it is currently 4am and i am gonna see and list everything i need to spend money on. thank you i am thankful for this tutorial!
Glad I can help 😁
After seeing the FNaF movie, I’ve finally decided I want to make a suit of the yellow rabbit.
This tutorial is absolutely perfect for me, as it’s very close to what I’m wanting. Here’s hoping mine turns out looking alright! Would love to hand out candy with it next Halloween!
That's awesome!!! I hope it helps 😁
Same for me! Good luck!
Just for info the pre-springlocked form is called spring Bonnie
@@monsterzeroarts7468 The yellow rabbit is a unique design as it’s partially withered, making it a mix of spring Bonnie and springtrap. That’s why I refer to it by its movie name.
Wow ! I actually saw the FNAF movie last month and discovered the huge story behind the games etc. And now I can't stop watching fnaf related content and I really want to build a springtrap suit. As far I don't know anything about cosplay, your video and the clear explainations just filled me with so much hope and excitement ! I can't wait to try to do it ! Thank you !
I'm working on a springtrap costume for halloween and this tutorial will help so much. Your mask looks great!
That's awesome! You'll have to show me when you're done! And thank you so much! 😁🙏
@@AyeJayDeeDIY Thanks! One problem though, when I make it how will I see out of it? Can you see out of yours? And what foam do you use? Sorry for all the questions
@@michalbeeble4569 I love that you're asking questions! And if you check out my channel, I actually posted a video that answers all of those questions! Here's the link to the video 😁 ruclips.net/video/j-DAZZ-93aA/видео.html
So my school does this day where you can come in as ANYTHING, even costumes... I think I know what I'm going as...
I wish you had a company and did orders because damn i really need a springtrap costume
I’m so happy I found your channel
Springtrap is my favourite character and I have been trying to figure out how to make a costume forever but I thought I needed a super expensive 3d-printer
Thank you for helping me realise this is something I can do without having thousands of pounds
Glad I can help 😁🙏
@@AyeJayDeeDIY time to speed make this before fnaf movie leaves the cinema!
Wow! That's impressive! This will be a very useful tutorial for me!
Thank you!! Glad it can help 😁
I’m remaking my spring bonnie in honor of the new FNaF movie, and to terrify my house guests. I was struggling with doing the jaw but your tutorial helped me! My head looks great so far!
That's amazing! And I'm really glad to hear that, thank you 😁 And I would love to see your head!
Same to be honest
@@Undertale-Orange 😁
me too
@@AyeJayDeeDIYi been making mask before I found this channel and it has helped a lot! I made them out of cardboard mostly because I had no idea on how to use foam and when I did, it made things better and the mouths were always the hard part, but I agree this made the whole thing a whole lot easier
HOW DO YOU NOT HAVE AT
LEAST 100K SUBS BRO THIS IS AMAZING
Thank you!! And that would be a dream! 😁🙏
This is my favorite springtrap mask I seen I swear love it man👍
Thank you! 🙏 This means a lot!
@@AyeJayDeeDIY anytime man!
😁
Your springtrap looks Absolutely amazing!!! Well done! 😊
Thank you so much! 🙏
Huge thank you for this. I made a Springtrap head for crafting class in my university and it turned out very good, my professors and other students loved it :D i plan on continuing the costume and making the body too, so that I can have a full cosplay for a con that's gonna happen in May :)
I'm so happy to hear that! So glad I could help you out! Best of luck on the rest of the costume
I tryed battingtons tutorial and wow it was hard.
This is much easier so thank you so much!
I’ve only made the rough version of the ears today, but they’re pretty good for being rough. Thanks for the tutorials bro. :)
That's awesome! And of course! Good luck on it, and I'd love to see what it looks like when you're done!
@@AyeJayDeeDIY I’ll update you on progress, thanks
@@SuperMarioWowza67 awesome!
Thank you so much for this tutorial! I stumbled onto your channel on accident, and im glad i did.This is also the only yt vid that has actually helped me in making my cosplay. You provide useful information + tips
Thank you so much! And I'm glad you stumbled your way here!! 😁
I couldn’t find any peach colored felt, but I used peach colored foam, the rectangle ones that are $1. I ended up using black and red paint, blending the colors a little bit to make a burnt skin effect.
This is awesome! My nephew wants to be springtrap for halloween this year, and since i make his costumes, this will be very helpful in making it!
Glad I can help! I also have the full body tutorial on my channel that may help 😁
Instructions unclear, I’ve been spring locked
Springtrap cosplay: the authentic experience
Can you give away a Freddy or springtrap mask? I’ve been trying to make mine but they all keep breaking or don’t come out good (thx for the heart even though you got rid of it❤) also keep up the good work your amazing
I would love to! I'll be giving a mask away to one of my subscribers once I pass 1,000 subs. So stay tuned cause you could be the winner 🫢 Also if you'd like to, you can share my channel so that way it's closer to my goal 😁
@@AyeJayDeeDIYok I will ❤
@@AyeJayDeeDIYare the jaws moveable?
@@footyballz525 awesome! Thank you! And thanks for the support! (Also I didn't mean to get rid of the heart, it was an accident haha.) I make sure all my amazing subs get a heart!
@@footyballz525 yep!
awesome tut! I fr just impulsively ordered everything to make it, and will hopefully have some updates soon!
Thanks! And awesome!
This is amazing!! I can’t wait to try and make it. (Really want a cool Halloween costume this year lol)
Thank you!! I hope it helps you out!
This was so beyond helpful. Thank you!
Glad I can help 😁
Epic springtrap dude! Im trying to make a springtrap suit so i can wear while watching the movie lol, this helps a lot, thanks!
Thank you so much! And that's awesome! You'll have to show me your finished product!
@@AyeJayDeeDIY i certainly will :)
@@CaptainSnicks 😁
BRO THIS WAS AMAZING 😭😭 IVE BEEN LOOKING FOR A CHEEP BUT GOOD TUT AND URS WAS PERFECT OMLLLL
Thank you so much!! Glad it can help 😁
the springtrap head is so fire even though it's on a budget good job!
Thank you!!
Thnak you so much for this! My son wants to be this for Halloween and I been overwhelmed these past months looking up ways to make the head. I would come and look it up on here every few weeks. I almost about gave up until today. Thank you so much again for this! ❤
I'm really glad I can help! You're son is going to love it 😁
How mutch time did it take?
@@soscemo69 about 20 hours total in the span of a few days
@@AyeJayDeeDIYThanks for the answer, i want to build this for the FNaF movie. This is the first cosplay i will do for a long time. I got the materials, now the problem is assemnling it, but i know that it's going to be very fun.
@@soscemo69 Hopefully the tutorials will help!
I’m gonna impress my friends on Halloween bc they said they didn’t wanna match with me :(
Omg I needed this so much I already have his full body but I couldn’t find a way to make his head and I’m making this so I can wear it to the theater when the new movie comes out man it’s gonna be great!!
That's awesome! Glad I can help 😁
you are so creative you know your the most creative person i know anyone i know who is creative DOES NOT come close to you ❤🔥❤🔥❤🔥❤🔥🔥
Thank you so much 🙏🙏
Man I wish I have the materials required to make this head. Anyways, nice tutorial!
Thank you!!
This is awesome! I do have a question though, do you have to wrap it in a second layer of PolyFoam or can you just use one roll? Thanks!
You can do one! I prefer to do 2 because it makes it bigger and more durable 😁
@@AyeJayDeeDIY Thanks! This was my alt account.
@@Mintinus 😁
The tuto is perfect and so helpful thanks you so much❤
Glad I can help!
5:28 how many do we need?
(Im mot sure)
You're So Talented
Thank you so much!
What were the dimensions of the foam you used to do the triangles and such? I’m asking because once I measured my head, there’s a bunch of extra foam going up
Measure how long the foam sheet is. Divide that number by a high number like 7-10. Say the foam sheet is 32 inches long, divide it by 8 so you get 4. 8 is the number of triangles, and 4 is how many inches the bottom of the triangle is. I usually make the height about 3.5 inches tall. Mark a line at the midway point of the 4 inch base on the triangle (2 inches) and draw a line straight up 3.5 inches. Then just use a straight edge/ruler to connect it from the top middle to the bottom sides. Hope this helps 😁
When wrapping the head with a second layer of foam, do you have to do the triangles again? I’m starting my springtrap head today and just wanna make sure ^^
You could either do the triangles, or cut a piece of foam into a circle, mold it on top of the dome on the base layer, and trim the edges
@@AyeJayDeeDIY thanks so much! Absolutely looking forward to making this springtrap head. It’s gonna be my first time making a costume! 😅
@@AaronInVR awesome!
i just finished making my springtrap costume out of cardboard but now im on my chrome book riting the things i need for my new springtrap costume out of foam your video is helping so much and im so happie that you made this video
I am going to make a springbonnie mask for fnaf movie and halloween so this helped alot thqnk you❤️
Awesome! Glad I can help 😁
Your content never fails to be entertaining and impressive!
Thank you so much! This means a lot 😁🙏
@@AyeJayDeeDIY No problem! Also do you think you’ll be making a video on the freddy body? I meant to ask a while ago but totally forgot
@@bitterferret yep I'll be making a full body tutorial! I just gotta acquire some materials. I'll hopefully be done with it by early August 😁
@@AyeJayDeeDIY awesome thanks and good luck making it!
@@bitterferret thank you! 😁
Is it possible if you can make suits with the mask as well? It would be awesome!
Definitely someday in the future! It'll take a lot of time and money, but hopefully with the growth of this channel, I can make it happen 😁
Thanks for inspiring me 😁😁😁
Glad I can inspire you 😁
Dude, this is just amazing
Thank you!
Hey! Looks amazing! What are the measurements for the triangles on the foam at the start? 🙏🏻
Measure how long the foam sheet is. Divide that number by a high number like 7-10. Say the foam sheet is 32 inches long, divide it by 8 so you get 4. 8 is the number of triangles, and 4 is how many inches the bottom of the triangle is. I usually make the height about 3.5 inches tall. Mark a line at the midway point of the 4 inch base on the triangle (2 inches) and draw a line straight up 3.5 inches. Then just use a straight edge/ruler to connect it from the top middle to the bottom sides. Hope this helps 😁
@@AyeJayDeeDIY would the 32 inches you used in your example be the circumference of your head that you measure out at the beginning?
@@AyeJayDeeDIYthankyou 🙏🏻🙂
Remember me when you get famous 💯
Of course! Thank you for the support 😊🙏
comic con coming in a month or so lets see if i can atleast get the head made wooo! wish me luck
thanks finally ı can make my self a mask
Awesome!! It's gonna turn out great!
I can't believe I'm about to do this. I'm not a crafty person, I only paint and draw. After being a fan for 9 years I finally snapped
I’m gonna make a withered golden Freddy costume, with now knowing the basics, this REALLY helps
Awesome!
Bro I’m going to watch all of them because I’m planing on making my own Fnaf movie with my friends
I’m being springtrap for Halloween so this is helping me my lil sis wants me to me to maker her a Bonnie mask so
My brother wants to have a Springtrap cosplay and it’s turning out great thanks to your tutorial!
Glad I can help 😁
super cool imma try and make this
Awesome!
I'm gonna make it NOW!!
OOOOOOOOOOOHHHHH WHAAAT THEEE HEEELLLLLL Look at the curvature of his back in the beginning, he be bending 150° golly
😭😭
I have seriously no idea why I sit down and watch these videos even though I don't even make any of them
1) its going great, this is the best springtrap head tutorial ever! (Other tha the one daregularsauce made, but im not rich)
2) do you use elastic for the jaw?
I know his is better, thanks for pointing that out 👍 But my goal is to show how to make them while on a budget and as cheap as possible. Because I myself aren't rich either. And yeah add elastic
Thanks! i will buy the stuff and make it!
this is better then the fnaf suits in the movie
🙏
this is going to help me with spring bonnie thank you
Glad I can help 😁
We followed your videos and made Springtrap for Halloween, got lots of compliments, thank you! (not as good as yours but not bad for a first attempt)
That's amazing! I'm really glad the tutorials helped 🙏
@@AyeJayDeeDIY ruclips.net/user/shortsuLT1n7rfMoc
@@mason_tmI love it!
not sure when i'll be able to but i'm definitely gonna use your tutorials as a reference for a cosplay of movie springtrap
Awesome!
Mines
pretty good for first time😊
all u should try
Wow, you are very talented
Thank you!
You shoud be hired for the fnaf movie 2!
That'd be a dream!
BRO ME AND MY DAD R STRESSED MAKING THE HEAD SHAPE. I have five questions
1. What are the dimensions for the triangles because when we try it some are too big or too small to perfectly cover the entire roof of your head
2. How many triangles should there be to fit the roof perfectly
3. How do you draw springtrap’s face so perfectly like how big is his eyes or how close is his nose to his eyes
4. Is the head and bottom jaw separate because our head looks too skinny and tall for it to be Springtrap’s whole head. So should we cut off the bottom half?
5. How do you make the nose to stick out
Measure how long the foam sheet is. Divide that number by a high number like 7-10. Say the foam sheet is 32 inches long, divide it by 8 so you get 4. 8 is the number of triangles, and 4 is how many inches the bottom of the triangle is. I usually make the height about 3.5 inches tall. Mark a line at the midway point of the 4 inch base on the triangle (2 inches) and draw a line straight up 3.5 inches. Then just use a straight edge/ruler to connect it from the top middle to the bottom sides. All you do is use a marker and draw his face 🤷 There isn't anything special to that. I free handed it. The eyes are the size of the diameter of the ornaments. Draw the eyes first based on where your eyes are. For the last questions: Yes... As shown in the video I make a top half of the head and make the jaw separate. I show how I connected them by using a hinge mechanism with brad pins. Make sure to watch the whole video because it's shown there. Do you mean the nose or the muzzle? I show how I made the nose in the video. But if you are referring to the muzzle, just hot glue a couple pieces of foam together, sketch out the shape, and trim the excess foam off
I'd like to thank you for inspiration and help. I made mine based on yours and my son loves it
I'm happy to hear that!
the video helped me soo much thanks to you ,and , I ALWAYS COME BACK.
Glad I can help 😁
THX SO MUCHHHH PERFECT FOR MY FNAF HALLOWEEN COSPLAY
Glad I can help 😁
Im doing something similar with cardboard and this helped a lot!
😁
I want to make the mask and put it on a pumpkin for my college's pumpkin decorating contest
Nice!
Thank you I needed this I can’t wait to start working on mine!
Awesome!
this gave me a wacky idea
make fursuits but they have springlock contraptions inside it and you dont tell the customers
I wasn't doing a springtrap costume but springbonnies but still this tutorial really helpted me, especially with the head, thank you😍🤩😀
That's awesome!! Glad it can help 😁
dang I'm an eleven yr old that made a spring trap head with this! thanks!
Glad I can help 😁
Hey just wondering can you tell me all the materials i need please also great video
Check the description 😁
can see when you put it on and btw it looks so dam cool
Yes, and thanks 🙏
I have a queston, How does the moving jaw work? Beautiful work btw!
I have that included in the tutorial 😁 I explained it a little better in my most recent video, the part 4 on Foxy 😁
@@AyeJayDeeDIY Thanks.
Just won my costume contest too, THANKS!
Congratulations!
BRO!!! ur actually getting popular!!! u got 2.2k views on a vid!!! yooo good job dudeeee
Thank you!!! I might get 500 subs by the end of the week at this rate! 😁🙏
I am planing on making 3D printed for the entire out fit
Cool 👍
Thank you man! You helped me :)
Glad I can help 😁
What do you look through? The mouth? How is it sitting comfortable on your head? Like how is it stable?
It's pretty comfortable wearing it, luckily it's made with foam so it's soft and spongy. It's also pretty secure. I made it to the shape of my head so the foam will in a way mood around it. Check the description about how to see from it 😉😁
Is there a full material/tools list? I want the links to all the things u have to buy and have so that I can make this thing fr! This is so amazing. Tysm for you hard work on this vid
I hope you respond!
It's in the description 😁
Ima try and make this mask to bring to the Fnaf movie I hope I’m able to make it in time
Nice!
This might be helpful thanks dude!
Daymn thats not bad
Honestly you make it look so easy I’m only able to do the helmet part rn and some how it’s tight
Make sure before you start, you wrap the foam around your head to make sure it isn't too loose and not too tight. It'll take some patience and time 😁
@@AyeJayDeeDIY I did wrap it the we put the second layer on then it got all tight
@@AyeJayDeeDIY is it extremely important to have the second layer???
@@AyeJayDeeDIY pleaaaaase say it’s not
@@RINKRATZ_VR not extremely important, just depends on how big you want your head
Amazing! Btw can you make a toy bonnie mask?
I would love to make Toy Bonnie! I'll make a poll with some characters and have people vote on it! 😁
I really hope toy bonnie wins!!
@@L14M_UwU 😁
I really like how your mask turned out ❤ just one question, was there a step after applying the 2nd foam layer? Because how did you make the nose/snout on the foam?
This happens between 1:01 - 1:03 , there appears to be a nose and i cant figure out how to make that
You mean the muzzle? All I did was stack a few layers of foam, hot glue them, and trim it to shape. Super simple
now make springtrap cosplay tutorial but only with duct tape,scissors and hot glue
Wearing one of these in the Philippines would be a nightmare, all the dust and sweat would get on it.
Way to go superstar!
Glamrock approved!!
Yo ima get the stuff i need now! Thank you so much
Awesome!! Glad I can help 😁
Okay I’m going to remake the head next month because #1 I’m bored and #2 I have more reference photos I hope it turns out well
Nice!
Hello! Can you please make a funtime freddy cosplay with the Bonnie hand puppet? TYSM! I love all your videos they are really helpful! I hope i win the giveaway but aswell goodluck to all those people who want it aswelll! ❤
Hi! That is definitely something I will do, and I love the idea! And thank you so much 🙏🙏
springy boy needs his chompers ''to bite children''💀
😭
Thx for the tutorial i just made foxy and now im doing witherd bonnie
Glad I can help 😁
Honestly using this method for withered Bonnie when ever I get in lazy