ive been a fnaf fan for about 6 years now and i was so excited when i saw the community photos Edit: holy I've never gotten 90 likes thanks! Edit again: thank you o much for 100 likes ive never gotten that many
Came out PERFECT as usual!!! So glad despite all the hiccups he got done in time for the movie!! You guys are super creative with how you made this happen and I’m honored you used a part of my original pattern to make him come to life!
The coolest part of this animatronic is that it doesn't matter if a seam is kinda wonky or something doesn't quite line up. Springtrap was left to rot for decades, then literally set on fire multiple times. He's supposed to look a little rough and janky. 😊 Great work as usual, guys!
Worst part about it is, most bigger Halloween props are made to just perfectly hold their own weight. You guys did really good working around it and still making him look really good!
Long story short, William Afton (the person inside Springtrap) got killed when he was wearing a springlock suit, but the springlocks malfunctioned meaning metal parts holding back wires and sharp pieces of metal were shoved into his back, neck and limbs when the springs unravelled meaning that he died when his own blood flooded his lungs so he couldn't even scream out. Oh and he was a murderer.
Let me tell you he have2 son laya got trap cirus robot Andrew bullied by hes mike afton got bit by fredbear william afton take reveags kill four garret got kidnap by william afton i always come back
23:18 the eye rings are to hold the animatronic eyes in during suit mode. And when a springlock failure happens, the human eyes are effectively replaced with them.
The clicking actually goes along pretty well with it! The springlocks would normally make clicking sounds wouldn’t they? The springlocks are also old. Making them weak, and making clicking accurate!
Infinite respect to how much effort you guys make to adapt your plans when things go awry. Motivation is so easy to lose after a big disappointment, but you just take a breath, reset, and keep moving. Also, as a preschool teacher, I always love a googly eye.
It's really like everyone is putting out their best video ever today. Andrew Huang/Rob Scallon, OTV, Drawfee and now you guys. Incredible build and so much attention to detail.
little thing I noticed, but the metal things you used to connect the skeleton to the suit is like how the springlocks stabbed into his skin kind of. Idk if that was intentional or not but if it was that was pretty cool!
5:06 Scott has always been a bit weird with how he models things sometimes, especially when it's stuff that you don't normally get to see super well, given his style of modeling, I fully believe he intended that to be bits of muscle/flesh that has clumped up at those areas, and the simplest way to model that was to just make it tubing that wraps around
@@KiraMac123 The suit is this thing called a "Springlock suit" It can function as an animatronic with a normal endoskeleton, and attached to that endoskeleton was a series of these things called 'Springlocks' that you could crank to pull the Endoskeleton out of the way so it could be worn as a suit by a normal person. A man named William Afton would use this suit to lure kids to the parts and service room (or wherever he felt like it) to kill them and put their bodies into the other animatronics. These springlocks were susceptible to failing though, especially with moisture, so one night Afton puts on the suit and there's rain leaking through the building and it gets into the springlocks causing them to fail and the animatronic bits shoot back to their original place while he is inside the suit (crushing him very slowly and painfully) and he dies inside the suit, but his remains are now semi wrapped around the bits of the animatronic
Another shorter and easier way to make Springtrap is to: 1. Make a SpringBonnie costume. 2. Put springlocks in it. 3. Put it on. 4. Simply breathe. And then you should have a Springtrap costume! ((WARNING: Injury may occur during the process.))
Perfectly timed not just for Halloween, but for the movie release! This is a phenomenal piece, I'm so glad you both persevered and came up with new solutions. All that hard work led to a truly wicked result!
Fun fact about those outer eye-rings: It's relatively hard to see, but if you squint, not only are those eye rings stationary, but they're also transparent, while the inner white eye seems to have veins. It's been theorized by a lot of people that those outer eye rings are actually the rotted-out or popped-out portions of Springbonnie's eyes, while the actual white eyes are where William Afton's were forced out of their sockets and into the inner shell of the suit's.
Love the attention to detail and the fact you two didn't give up when the arms didn't work as expected. Sometimes the convenience features of something, adjustable arms in this case, work against you. As far as I know, the mechanism behind this is 2 shallow angle crown gears pressed against each other with a bolt and spring. If you're not able to disassemble the shoulder to replace the spring, or tighten the bolt, maybe driving 2 screws into the shoulder would provide another option, albeit a less adjustable one.
Lots of respect for persevering after so many issues. The result was definitely worth it, and I really enjoyed the video. I’m really shocked at how well this looks, and dare I say one of the best Springtrap suits ever made.
This looks great! I have a small tip, and that is that if you need it to be light, I would recommend using upholstery foam instead of Eva foam! I use it in cosplays where I cover up my pieces with fabric and it looks great. It’s also cheaper, which is a plus.
one of the unfortunate downsides to upholstery foam (and all foams really but couch foam has a lotta holes!) is the risk of damp and mould- especially as this is an outdoor animatronic it may have heavily upped the risk of this thing moulding especially at this time of the year, which funnily enough is very fitting for springtrap but realistically a tad gross haha
@@jouga Yeah true, That's One of the worst thing's bout it but, I mean, it is matching springtrap so i don't see a problem with it! And plus, Ive never really made cosplay's, But i am THINKING, to making one once i have a 3d printer
I am at a genuine loss for words. I remember seeing that old video of that real life Springtrap animatronic in 2016, and this just brought me back, man. It's somehow even better. It's so insanely faithful to the game, while also still staying in the realm of a fully functional retail animatronic. I'm serious when I say words can't describe how much I love this. Though I already held you at high regard before, as a longtime FNaF fan, you have my full respect. This is possibly the best makeover in the haunter community. Stay wicked 🤘
Painting the bones red kinda makes sense in terms of him being "trapped" by the suit. Living bones are usually pink, and the implied fleshiness works really well in terms of bring the appearance of the game model to the real world. All that said, THIS WAS AMAZING! You really pulled off a last-minute victory from the jaws of defeat! I cannot wait to see where you two go as you move into DIY animatronic designs in the future. Hopefully you can exploit your fellow Austinites to find assistance in getting the control coding for future systems working. You picked a great time to get into robotics, the power and cheapness, as well as the porting of simple programming interfaces, in modern microcontrollers has never been better. I am so excited to see how this all turns out!
I like how they acknowledged how bad Scott was at designing a “realistic” corpse for springtrap, the original head looks like one of those carved turnips from the original Halloween tradition Edit: Wow, thank you all for supporting this kinda dumb comment! This is my most liked comment on any video! Thank You ❤️
We love copyright free upbeat music playing in the background as 2 people make the rotting corpse of a child serial killer stuck in a human sized bear trap
“Where are his bones?” Replaced. The endoskeleton replaced them when the spring locks snapped into place in the suit. Literally every part of his body was forcefully merged with the endo. What a gruesome death. Metal as fuck.
Spring bonnie: I'm going to kill you Emily:I got a spray bottle Spring bonnie:SH- AHHHHHHHH AHHHHHH SOMEONE HELP AAAAAAHHHHHHHH *Cough* * cough* HELP AAAAAAAHHHHHHHHH
I love that y'all share the mess ups and changes in plans that you have to make at times. It is so genuine and authentic. I know y'all probably curse behind the scenes but you do a great job to keep level heads when things don't turn out as expected along the way! Thanks for your fun and spooky creations. You both are so very talented and seem to work together well!
I love the creativity and the quick thinking even though there were so many bumps along the journey of making him! Love the perseverance and commitment!
Tbh the reason I think his intestines are on his ankles and arms is cause the suit like compacted his body so after the process of being crushed and his body loosened up his guts kinda flew all over the place around the suit, so it’s kinda like one of those satisfying crushing videos
I’ve considered making a life size Springtrap (non-moving) for a while now and I think that this gave some ideas of how the parts could be made! Great work as always and thank you for the inspiration!
Love the building process @WickedMakers Thank you for showing the trial and error parts as well. Goes to show that not everything comes easy and gives a realistic view into the creation of your great designs.
Watching you guys build this suit for Springtrap has me wanting to make my own suit for a convention one day! I love watching how cosplayers or builders like you guys make stuff like this and I've been meaning to learn how to use tools like eva foam to create props. I'm unsure which animatronic id go as but if I had to choose, I wouldn't mind Springtrap or one of the Withered animatronics from FNAF 2!
Well, they had to tweak his design. And the skeleton they chose resembles Springtrap's cartoony anatomy, especially the head. I have tried making Springtrap models that were human-based, or tried to fit a human model inside the Spring Bonnie suit, and let me tell you: you cannot make him look like he does in game without changing his design to fit human proportions, or changing the human proportions. To begin with he has a really long neck and really wide shoulders, the head is a mess, human heads are way smaller and thinner, and fit funnily inside the original head. His eyes are too far apart, and the eyes that meant to be Afton's are absolutely huge. And let's not forget about the size of the hands which are huge for a human, even with large hands. Scraptrap supports more of a human-compatible design (although the inner design is even worse than Springtraps).
@@Yes_im.a-lordpeacock Never heard anyone mention it, but someone whose favorite animatronic is Springtrap, and used to draw and model him, and try to make realistic models, Springtrap is an anatomical mess and nothing about his insides makes sense. That is true both for the animatronic and human parts. They are fine because it is barely visible because of the suit.
The way a springlock suit works is the animatronic parts are retractable, but they're held in place by springlocks, which aren't very reliable. And springs like, well, _springing,_ so it just kinda... shatters your bones and sprays blood everywhere when the animatronic parts spring back into place. William got ghost immortality juice, though, so he didn't die.
THANK YOU for leaving all of this video intact. Today I just finished decorating for Halloween outside. We ran into all kinds of problems but we persevered. Normally I would have decorated for Halloween the last week in September. However, we had all kinds of issues. Watching you struggle, pivot, struggle, pivot again shows me that even the professionals have unexpected issues. Great job on this animatronic. It looks worthy of an amusement park!
I love the guy but what was he thinking when he was modeling the human under the suit there lol It doth appear that he cannot model humans for the life of him
No kidding. No offense to Scott but I can't take him seriously when he's peeking in the doorway. He looks like hes contemplating how to steal my wallet
@@DarkBunsCult literally the only time he looks intimidating is when he's on the cameras. I'm just glad there's fans who can take what he was trying to do and basically make it better
I’ve just found this channel but I’m definitely sticking around for more - this looks amazing!! And I just love that you showed all the bumps you had to push past and what ideas you came up with, all to not give up - it’s really inspiring!
This is hands down one of the best that I have seen. I’ve seen a lot of cosplays of this character and this really brings the character to life. Also love the fact that he is slightly on the smaller side😂. The movie has William Afton as this tall intimidating figure, but now I see him as a lean man that was just below average height and it makes me laugh especially with how intimidating his character is meant to be. 😂 love it
23:23 he has those eye rings because when he got spring locked, the animatronic eyes forced his real eyes out of his sockets and replaced them. those arent his real eyes they are the animatronic eyes 👀
This is honestly one of the coolest Springtraps I've ever seen! You could almost imagine him coming to life from how accurate and realistic he is 😁! Every little detail shines through perfectly from the faintest stroke of a brush to the brief highlight of a piece of metal 👏 Really awesome!!!! Having a piece of the suit would really be special, especially from how high quality it is and from the love that's been put into it :) Really inspiring!!!
Woahhhhh!!! Springtrap from fnaf!!! This is truly so amazing!!! Thank you for making sprintrap!! Y’all are truly so talented Jaimie & Jay so thankful I watch y’all’s videos it’s almost Halloween wooooo!!! Stay wicked everyone!! 🖤✨🤘🏻 thank you for a new video btw!!!
Gosh this is so cool. I've never been the craftiest person besides basic woodworking and sketching, but I've recently found myself greatly interesting in modeling and costume making. My favorite part in these types of videos is the failures and seeing how people problem-solve and improvise their methods. You're a great team, this guy came out fantastic.
Edit: OMG OMG OMG THIS THE MOST LIKES IVE EVER GOTTEN!!!! OMG!G!G!G!GGG!!G!! !I GOtr 291 LIKES okmg oEMg SOmg!!! omG OM!V!!! TySSM!! !O!MNG! OMG iRHIS IS THE MIST LIKES iBVE EVER GOtten!N!N!N!N!N! !!! mUm IMF AAMAIOUS im THEGEMOS T LIKES I EE VEERTE GOTTEN!!!!!!! THANK YIU!!!!
What I love about your videos is that you guys do an excellent job of making these high quality conversions look doable for entry level makers. It really makes me want to scratch that creative itch and make some of my own stuff.
2:37 His Bones Got Crushed And The Metalic Structure Went In Animatronic Mode and the suit was who know how many years old it was probably rusting so it makes sense why a springlock failure happend and he got crushed.
I can't stop coming back to this video. It doesn't matter if I've watched it a million times, it's still as amazing as the first time I saw it. This is absolutely incredible, and I can't even describe the joy it brings me to watch it all come together. Great work, guys! Keep it up! ❤
"Why are there intestines around his ackles and in places they shouldn't be" Well let me give you guys some backstory. In the lore, mainly the books, specifically Silver eyes, he mentions how springlocked felt like. "Within a split seconds, all the metal from the endo-skelaton with drive straight into you." Also, he was trapped in a storage room for over 30 Years. He was only dead for 15. So about have the time. SInce those 30 years, he says, quote, "I ripped out my organs from the suit, it was so painful, it made me want to die even more." So from this, we can say that he was pulling things out from what they where meant to be. So those organs wrapped around his Feet could've been Vital organs. When you're springlocked, the eyes from the suit push into your eyes, causing them to either explode, or pop out of their sockets in place for the animatronic's eyes. All his teeth fell out due to the springlocks jabbing his face. The point being that these springlocks covered every INCH of the suit. So therefore everything in him was gone within seconds. The bone situation. I metioned earlier how Afton was stuck in a room for over 30 Years. His bones could've also fell off. And Fazbear frights? Every single Fazbears Entertainment place was Burned down. Afton was springlocked in the Second Location.. It Was burned downed Then Reconstructed to The Third Location. Afton was also in the second location during the fire. This is what gives the suit it's burned texture.
Absolutely insane work. I've been active in the horror/music mask scene and this might have given me the push I needed to make something fnaf related on my own. Definitely wouldn't complain about a few extra arm pieces, even if I'd rather display them just for the sheer coolness factor. Great job you guys!
Me and my brother just finished about a 2 week long process of making all of the 5 fnaf character heads out of cardboard, foam, lots of hot glue, and felt for the movie. Can truly say we would not have gotten them done without the inspiration from your channel and the drive for success. Thanks so much and I cant wait to see what you guys make next!
You guys should do sun and moon!! That would be really cool, you could do it for your making your own animatronics, you can give it a spinning head, and like a "huggy wuggy stance"
Fun fact Springtrap’s bones actually got crushed, and the endoskeleton became his bones all the bones got crushed and fell out of the suit, and then his flesh got stuck to the suit 2. The suit did not malfunction the suit actually got activated by water so in the game it shows that the water droplet touched one of the spring locks.
Watching this come together was almost as if I was watching Scott Cawthon himself model the actual spring trap into the game. So incredibly amazing how well it came together and watching it turn on gave me chills to see how well it ran with all the weight on top! Maybe one of these days I’ll buy a bamboo printer and make myself a costume out of one of the models, seeing you guys wear some of the pieces made it seem like they were pretty compatable for human wearing, albeit with maybe a bit of tinkering 😂
This is incredible! Looks amazing and it's very impressive it was able to be animated! I love the attention to detail too, with basing him on a skeleton and all the little things like the springlocks.
This definitely inspired me to make my own Springtrap suit. I learned a lot of methods from this video that I'll probably use from my own. I actually made a Spring Bonnie helmet from some print files I found online with 3D printing. Maybe y'all could send me one of your arm pieces as inspiration for when it comes time to make my own? 🤔 Y'all did a killer job with this though. It's really cool to see something this creative. I hope to see more FNAF content from y'all soon! PS if y'all do happen to send me a piece I'll definitely be incorporating it into my costume and featuring it on my channel when it comes time for me to film my Springtrap video😁
You guys never disappoint with your animatronics! Their absolutely amazing and their very well made. The Springtrap animatronic came out really good and it looked super accurate! Amazing job!
I am not the best at creating things out of foam but this really inspired me to try to make a clay version its not finished but it might be after Christmas. Therefore, I think what you have done on this video will help persuade others into following their dream into becoming an artist and let them have the opportunity to do something like this also.
This was awesome! Having to readjust and just stick with it is the best advice for making. We made a DND inspired Halloween display and I was out adding until 2 hours before our wedding on Halloween! The excitement people expressed was so rewarding. I averaged 10-20 trick or treaters for years and this year it was snowing we got around 60-70! More people in the area are decorating and I love it.
Wow, I love it!😍 I’m such a big fan of spring trap! and when I saw this video, I was like “ YASSssSsSs” 😁 Love you guys. I love all the things you guys make 😊! You guys inspire me🤩
This is Incredible! I love how despite the fact that things went wrong, like they do, you persisted and never gave up. Motivation, persistence and patience can make you achieve great things and you should be proud of yourselves. Springtrap looks amazing!
I have been thinking about making my own springtrap cosplay lately and found this video! Giving me lots of ideas on how to make it come to life! Thank you!
i love it. I've been working on trying to make a animatronic but it never ends up well so it's nice seeing other people's creations and how amazing they look.❤
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
He always comes back.
I always come back to the bathroom after taco bell
I always come back after forgetting my phone in the other room
I ALWAYS COME BACK😮😮😮😮😮
ive been a fnaf fan for about 6 years now and i was so excited when i saw the community photos
Edit: holy I've never gotten 90 likes thanks!
Edit again: thank you o much for 100 likes ive never gotten that many
Yup
Came out PERFECT as usual!!! So glad despite all the hiccups he got done in time for the movie!! You guys are super creative with how you made this happen and I’m honored you used a part of my original pattern to make him come to life!
Yeahhhh DaRegularSauce!!!!!
@DaRegularSauce you should make Foxy next.
Thanks man!!! Really glad you liked it. Your Springtrap was a huge inspiration.🤘🏼😄
@@oliverneves-gi3lhwhat he said
make new content already
I'm impressed. Not just by the quality of the animatronic but also by how accurate they were with the lore. Incredible.
Awh man they used a fake human skeleton instead of a real one☹️
@@Engel-officialYT💀
@@Engel-officialYTaww 😭😭😭😭😭
@@Engel-officialYTwhat do you mean
Thanks! 🤘🏼🤘🏼
I love how you guys talk about spring trap. You make him sound so mysterious.
The coolest part of this animatronic is that it doesn't matter if a seam is kinda wonky or something doesn't quite line up. Springtrap was left to rot for decades, then literally set on fire multiple times. He's supposed to look a little rough and janky. 😊 Great work as usual, guys!
Best part about making spooky stuff. 😄😄
Yeah he's like 70 somthing now😬😬
@@Pop.RockzzXD actually! hes 68/69 if u think bout it
The movie is out guys!
@@drygoods91919I’m going to see it tomorrow night
ahhh when it started chattering it scared me! this is so well done ⭐
Thanks! 😄
2nd reply!!!!!!
Weeeee
Hi RUclips
no way its the real youtube
Worst part about it is, most bigger Halloween props are made to just perfectly hold their own weight. You guys did really good working around it and still making him look really good!
Yep it’s always an issue 😄😄 We always think we can push it further than we can.
Despite that, though. You guys still made him look really good and you were spot-on about the lore
I
Don't put bubble wrap on thats that pop
❤HOW ARE YOU SO GOOD!?
Long story short, William Afton (the person inside Springtrap) got killed when he was wearing a springlock suit, but the springlocks malfunctioned meaning metal parts holding back wires and sharp pieces of metal were shoved into his back, neck and limbs when the springs unravelled meaning that he died when his own blood flooded his lungs so he couldn't even scream out. Oh and he was a murderer.
A murderer of five children
fIvE InOccEnt lIvEs
Let me tell you he have2 son laya got trap cirus robot Andrew bullied by hes mike afton got bit by fredbear william afton take reveags kill four garret got kidnap by william afton i always come back
@@LittleMissHI he murdere 2 more kids Charlie and golden freddy
Outsmarted bye a 7 year old 😂
23:18 the eye rings are to hold the animatronic eyes in during suit mode. And when a springlock failure happens, the human eyes are effectively replaced with them.
Presto change-o your eyes are now forfeit.😅
@@brandondavistherailfan6368How does William see us?
The same way a ghost does I guess@@sukuna_editz123
That's actually kind of terrifying. Cuz that means his real eyes got pushed back into his head in Lui of the animatronics eyes
@@sukuna_editz123ghost stuff
this is actually insane, someone should hire you 2 to make movie props, the paint job and just the startegy to make this is quite stunning
They finished it 2 to 3 months ago...
Thanks! We both used to work in movies and stuff. RUclips is way more fun. 😄😄
@@WickedMakersoh I didn't know that. Must be how professional these look
@@WickedMakersRUN
Jjkgouhbkubgjhgivhg
The clicking actually goes along pretty well with it! The springlocks would normally make clicking sounds wouldn’t they? The springlocks are also old. Making them weak, and making clicking accurate!
WHY DOES THIS W COMMENT ONLY HAVE 8 LIKES!? IT NEED Wayyy More!!, but anyway that makes it a lot more nartual for the old springlocks
Yes, exactly!
MOM IM FAMOUS MOST LIKES IF GOTTEN ON THIS ACCOUNT
But yes
He died by the spring blocks because somebody touched the sprint luck button
“I always come back.” Yea next game you’ll be a spine and head in a wheelchair with vanny pushing you
Haha very funny.
Infinite respect to how much effort you guys make to adapt your plans when things go awry. Motivation is so easy to lose after a big disappointment, but you just take a breath, reset, and keep moving.
Also, as a preschool teacher, I always love a googly eye.
Yes!! Thank you.
Please please please please please please let me have them I love fnaf
As that one Chris Pratt meme says:
_"Imrovise. Adapt. Overcome."_
Can you guys make me so do so please I want to see for school project a springtrap should Tekken fit me can you show the new next video
This is seriously insane, and considering how determined you were to make it before Halloween is just, honestly remarkable. KEEP UP THE GOOD WORK!
Thank you! 🤘🏼😄
👍
It's really like everyone is putting out their best video ever today. Andrew Huang/Rob Scallon, OTV, Drawfee and now you guys. Incredible build and so much attention to detail.
Never heard of any of the people you listed before in my life but I agree
Drawfee❤❤❤
This is so cool
i know
and socksfor1! he made the entire pizzeria
little thing I noticed, but the metal things you used to connect the skeleton to the suit is like how the springlocks stabbed into his skin kind of. Idk if that was intentional or not but if it was that was pretty cool!
5:06 Scott has always been a bit weird with how he models things sometimes, especially when it's stuff that you don't normally get to see super well, given his style of modeling, I fully believe he intended that to be bits of muscle/flesh that has clumped up at those areas, and the simplest way to model that was to just make it tubing that wraps around
also another thing to mention is that his guts spilled out when he was getting spring locked, so it kinda makes sense if you think about it
Always thought it was swollen tears and ligaments
Is it not just tubing from all the mechanisms in the suit?? I’m super new to fnaf so I don’t know much, just an assumption!
@@KiraMac123 The suit is this thing called a "Springlock suit"
It can function as an animatronic with a normal endoskeleton, and attached to that endoskeleton was a series of these things called 'Springlocks' that you could crank to pull the Endoskeleton out of the way so it could be worn as a suit by a normal person. A man named William Afton would use this suit to lure kids to the parts and service room (or wherever he felt like it) to kill them and put their bodies into the other animatronics. These springlocks were susceptible to failing though, especially with moisture, so one night Afton puts on the suit and there's rain leaking through the building and it gets into the springlocks causing them to fail and the animatronic bits shoot back to their original place while he is inside the suit (crushing him very slowly and painfully) and he dies inside the suit, but his remains are now semi wrapped around the bits of the animatronic
@@KiraMac123they are actually his flesh/skin as you can see on the original model
Another shorter and easier way to make Springtrap is to:
1. Make a SpringBonnie costume.
2. Put springlocks in it.
3. Put it on.
4. Simply breathe.
And then you should have a Springtrap costume!
((WARNING: Injury may occur during the process.))
breathe* lol
Injury MAY occur? It seems a pretty high chance.
BRO EXPLAINED HOW TO GET SPRINGLOCKED IN 5 MINUTES
FR
And wait a couple years
I’m inspired to make my own Springtrap after this now, years of doubt have been truly thrown out the window thanks to y’all
Do it, I have done it-so you can too!
yea man
Follow your dreams and so will I!
Glad to hear it 😄😄
Me to I’m inspired to make one
God that's unbelieably sick... I respect you guys so much for continuing with this despite such a setback.
Perfectly timed not just for Halloween, but for the movie release! This is a phenomenal piece, I'm so glad you both persevered and came up with new solutions. All that hard work led to a truly wicked result!
Thanks!!!
Fun fact about those outer eye-rings: It's relatively hard to see, but if you squint, not only are those eye rings stationary, but they're also transparent, while the inner white eye seems to have veins. It's been theorized by a lot of people that those outer eye rings are actually the rotted-out or popped-out portions of Springbonnie's eyes, while the actual white eyes are where William Afton's were forced out of their sockets and into the inner shell of the suit's.
Cool
gory! i love it. if the fnaf movie was rated r the spring locking they could have done that, if it was in they're budget.
I always thought those were part of the spring bonny suit
I want it!!!!!!!!!!!!!!!!!!!❤❤❤❤❤❤❤❤❤❤❤❤❤
Want what
Love the attention to detail and the fact you two didn't give up when the arms didn't work as expected. Sometimes the convenience features of something, adjustable arms in this case, work against you. As far as I know, the mechanism behind this is 2 shallow angle crown gears pressed against each other with a bolt and spring. If you're not able to disassemble the shoulder to replace the spring, or tighten the bolt, maybe driving 2 screws into the shoulder would provide another option, albeit a less adjustable one.
22:32 “Who knows? What could go wrong?”
The start of FNAF
Lots of respect for persevering after so many issues.
The result was definitely worth it, and I really enjoyed the video.
I’m really shocked at how well this looks, and dare I say one of the best Springtrap suits ever made.
Thank you!! Every project has issues. If nothing goes wrong you’re probably not pushing yourself enough. 🤘🏼😄
@@WickedMakers ok
This looks great! I have a small tip, and that is that if you need it to be light, I would recommend using upholstery foam instead of Eva foam! I use it in cosplays where I cover up my pieces with fabric and it looks great. It’s also cheaper, which is a plus.
one of the unfortunate downsides to upholstery foam (and all foams really but couch foam has a lotta holes!) is the risk of damp and mould- especially as this is an outdoor animatronic it may have heavily upped the risk of this thing moulding especially at this time of the year, which funnily enough is very fitting for springtrap but realistically a tad gross haha
@@jouga Yeah true, That's One of the worst thing's bout it but, I mean, it is matching springtrap so i don't see a problem with it! And plus, Ive never really made cosplay's, But i am THINKING, to making one once i have a 3d printer
Yes, good call!
@@jougacould you use plasti to resolve that or would it make it heavy again? Also still potentially moldy?
@@WickedMakersI love you guys! I would LOVE to do something with you! Unfortunately though I live in the UK 😅🖤
I am at a genuine loss for words. I remember seeing that old video of that real life Springtrap animatronic in 2016, and this just brought me back, man. It's somehow even better. It's so insanely faithful to the game, while also still staying in the realm of a fully functional retail animatronic. I'm serious when I say words can't describe how much I love this. Though I already held you at high regard before, as a longtime FNaF fan, you have my full respect. This is possibly the best makeover in the haunter community. Stay wicked 🤘
Fnaf is real (52 minutes have passed)
Thank you! We really appreciate it.
bro does not have a loss of words
I need the parts so if you could send it to me I would appreciate it for a project
Fbbnj cm fi tx f ru tx si tx f
🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
@@AtherNawaz-u8k
22:56 he sure looks like he has seen some unforgettable things in his past
Edit: the movie is awesome fans of fnaf should watch it
bro imagine being like a 7 year old kid who knows fnaf lore and then seein this thing past dark on Halloween💀💀
HELP THATS ME
@@Red_837don hur me please
Yeah, no. 😂😢
I'm 7 years old 😮😂❤🎉❤
They would run like their life depepnded on it
Painting the bones red kinda makes sense in terms of him being "trapped" by the suit. Living bones are usually pink, and the implied fleshiness works really well in terms of bring the appearance of the game model to the real world.
All that said, THIS WAS AMAZING! You really pulled off a last-minute victory from the jaws of defeat! I cannot wait to see where you two go as you move into DIY animatronic designs in the future. Hopefully you can exploit your fellow Austinites to find assistance in getting the control coding for future systems working. You picked a great time to get into robotics, the power and cheapness, as well as the porting of simple programming interfaces, in modern microcontrollers has never been better. I am so excited to see how this all turns out!
I like how they acknowledged how bad Scott was at designing a “realistic” corpse for springtrap, the original head looks like one of those carved turnips from the original Halloween tradition
Edit: Wow, thank you all for supporting this kinda dumb comment! This is my most liked comment on any video! Thank You ❤️
We love copyright free upbeat music playing in the background as 2 people make the rotting corpse of a child serial killer stuck in a human sized bear trap
I can already imagine how their house looks like with halloween. Just imagine driving by and seeing all those life size animatronics
“Where are his bones?” Replaced. The endoskeleton replaced them when the spring locks snapped into place in the suit. Literally every part of his body was forcefully merged with the endo. What a gruesome death. Metal as fuck.
Literally metal
Spring bonnie: I'm going to kill you
Emily:I got a spray bottle
Spring bonnie:SH- AHHHHHHHH AHHHHHH SOMEONE HELP AAAAAAHHHHHHHH *Cough* * cough* HELP AAAAAAAHHHHHHHHH
Really??? Jeez, I am not a real fnaf fan. I know ZERO lore. I gotta know more about this lore.
@@80HD3lifun fact you don't die of blood loss..
You die from choking to death from all the blood filling up in your lungs...
Yeah Metal
I love that y'all share the mess ups and changes in plans that you have to make at times. It is so genuine and authentic. I know y'all probably curse behind the scenes but you do a great job to keep level heads when things don't turn out as expected along the way! Thanks for your fun and spooky creations. You both are so very talented and seem to work together well!
I love the creativity and the quick thinking even though there were so many bumps along the journey of making him! Love the perseverance and commitment!
Tbh the reason I think his intestines are on his ankles and arms is cause the suit like compacted his body so after the process of being crushed and his body loosened up his guts kinda flew all over the place around the suit, so it’s kinda like one of those satisfying crushing videos
"aaaaggggghh- ooh my intestines!"
satisfying crushing video is one way to describe a springlock failure
@@attackeh or the squeezing food with force stuff 😅
I like to imagine theyre actually ropes of leftover muscles
"So it's kind like one of the satisfying crushing videos" is the most cursed way you can end a description of someone dying to springlock failure
I’ve considered making a life size Springtrap (non-moving) for a while now and I think that this gave some ideas of how the parts could be made!
Great work as always and thank you for the inspiration!
Do it!!!
@@WickedMakersI made a wearable one
Love the building process @WickedMakers Thank you for showing the trial and error parts as well. Goes to show that not everything comes easy and gives a realistic view into the creation of your great designs.
Thanks! It never comes easy but it’s always worth the effort.
If you need to cut weight in 3d printed pieces, try a 7 - 10% infill with the lightning design. Would also cut down print time and filament use.
when they started to dirty up the foam/fabric the difference was so phenomenal, im impressed
The absolute dedication to this build is amazing. Those extra parts would be awesome for a cosplay!
🤘🏼😄
Watching you guys build this suit for Springtrap has me wanting to make my own suit for a convention one day! I love watching how cosplayers or builders like you guys make stuff like this and I've been meaning to learn how to use tools like eva foam to create props. I'm unsure which animatronic id go as but if I had to choose, I wouldn't mind Springtrap or one of the Withered animatronics from FNAF 2!
Withered ones are my fave. Such fun designs. 😄
I wish I had an Fnaf animatronic 😢
@@WickedMakersI like whitherd bonnie
Don't get too locked up into it. 😂
22:56 springtrap sees Something
He sees the fan art 😂
Me When I Wet The Bed (I Still Do That Sometimes) 😢
FNAF Fandom: _"Oh Springtrap's design was too unrealistic how could a human skull be inside..."_
These guys: Yes.
When did they say that?
Yeah when
Well, they had to tweak his design. And the skeleton they chose resembles Springtrap's cartoony anatomy, especially the head.
I have tried making Springtrap models that were human-based, or tried to fit a human model inside the Spring Bonnie suit, and let me tell you: you cannot make him look like he does in game without changing his design to fit human proportions, or changing the human proportions.
To begin with he has a really long neck and really wide shoulders, the head is a mess, human heads are way smaller and thinner, and fit funnily inside the original head. His eyes are too far apart, and the eyes that meant to be Afton's are absolutely huge. And let's not forget about the size of the hands which are huge for a human, even with large hands. Scraptrap supports more of a human-compatible design (although the inner design is even worse than Springtraps).
@@Yes_im.a-lordpeacock Never heard anyone mention it, but someone whose favorite animatronic is Springtrap, and used to draw and model him, and try to make realistic models, Springtrap is an anatomical mess and nothing about his insides makes sense. That is true both for the animatronic and human parts. They are fine because it is barely visible because of the suit.
@@katamas832 sí Pero viste como el tipo se puso el casco de Springtrap y le quedó a la perfección? QUÉ ACABAS DE VER?
10:47 ngl the fact it clicks addes to the horror element of how spring trap is like malfunctioning
Or his bones crackling inside the suit, it gives me chills thinking about that 😵💫
yes it sounds great but unfortunately it means the animatronic isnt working .-.
The accuracy of your projects to their source material always amazes me. Great work, and I’m excited to see you start making your own animatronics! 👍
Thanks!! It’s one of our favorite parts, trying to match the source material.
hi wickedmakers
Just imagine waking up and seeing Springtrap standing at your bed and holding a knife
The way a springlock suit works is the animatronic parts are retractable, but they're held in place by springlocks, which aren't very reliable. And springs like, well, _springing,_ so it just kinda... shatters your bones and sprays blood everywhere when the animatronic parts spring back into place. William got ghost immortality juice, though, so he didn't die.
barney is a dinosuor
what is a "dinosuor" @@rush-j2g
You got got a bit of grammar wrong
Where? @@maryamhussain5708
THANK YOU for leaving all of this video intact. Today I just finished decorating for Halloween outside. We ran into all kinds of problems but we persevered. Normally I would have decorated for Halloween the last week in September. However, we had all kinds of issues. Watching you struggle, pivot, struggle, pivot again shows me that even the professionals have unexpected issues. Great job on this animatronic. It looks worthy of an amusement park!
Micheal: how many times are you gonna come back?
William: *Y E S*
Micheal: Sooooo 3?
"Yes"
@@WilliamAfton115YOO ITS WILLIAM AFTON
MICHAEL, A-E-L, not mic-heal
@@Kullimuna6699 Bro ITS NOT MICHAEL
At 3:20 me brother walked in, looked at my TV and thought I was watching a video off the dark web😭
Wow, Your Brother’s Kind Of A Baby, Isn’t He?
I think the way you made him actually makes him look more menacing than Scotts actual model.
i mean yeah they 3d printed it 😂
I love the guy but what was he thinking when he was modeling the human under the suit there lol
It doth appear that he cannot model humans for the life of him
No kidding. No offense to Scott but I can't take him seriously when he's peeking in the doorway. He looks like hes contemplating how to steal my wallet
@@Spiralredd Omg so true-
@@DarkBunsCult literally the only time he looks intimidating is when he's on the cameras. I'm just glad there's fans who can take what he was trying to do and basically make it better
I’ve just found this channel but I’m definitely sticking around for more - this looks amazing!! And I just love that you showed all the bumps you had to push past and what ideas you came up with, all to not give up - it’s really inspiring!
Glad you liked it! 🤘🏼🤘🏼
I like it❤
This is hands down one of the best that I have seen. I’ve seen a lot of cosplays of this character and this really brings the character to life. Also love the fact that he is slightly on the smaller side😂. The movie has William Afton as this tall intimidating figure, but now I see him as a lean man that was just below average height and it makes me laugh especially with how intimidating his character is meant to be. 😂 love it
William afton: 6.0-6.1 (from memory)
Spring trap: 7.0-7.4 (Also from memory)
@@Apollospaws didn’t know the canon heights. Still makes it funny in perspective. Great animatronic as always tho.
@@Horror_fever01 it is super cool, thought I'd comment the canon heights as a lil fact
Thanks! Someday we’ll have a big enough shop to build characters at their true heights. 🤘🏼😄
@@WickedMakers either way you guys nail every animatronic you do.
23:23 he has those eye rings because when he got spring locked, the animatronic eyes forced his real eyes out of his sockets and replaced them. those arent his real eyes they are the animatronic eyes 👀
This is honestly one of the coolest Springtraps I've ever seen! You could almost imagine him coming to life from how accurate and realistic he is 😁! Every little detail shines through perfectly from the faintest stroke of a brush to the brief highlight of a piece of metal 👏 Really awesome!!!!
Having a piece of the suit would really be special, especially from how high quality it is and from the love that's been put into it :) Really inspiring!!!
Woahhhhh!!! Springtrap from fnaf!!! This is truly so amazing!!! Thank you for making sprintrap!! Y’all are truly so talented Jaimie & Jay so thankful I watch y’all’s videos it’s almost Halloween wooooo!!! Stay wicked everyone!! 🖤✨🤘🏻 thank you for a new video btw!!!
Such an impressive build, and just in time for the movie 🎃
Spring trap is my favorite characters in the Fnaf games great job on doing this!!
Gosh this is so cool. I've never been the craftiest person besides basic woodworking and sketching, but I've recently found myself greatly interesting in modeling and costume making. My favorite part in these types of videos is the failures and seeing how people problem-solve and improvise their methods. You're a great team, this guy came out fantastic.
HE SAID THE LINE!!!!!! *crowd going insane*
24:31
What I love about this project is that u can kinda see the skull even when u wear the outfit it makes it look more realistic
Yeah
4:03 just a more simpler explanation: springlocks go boom and endoskeleton replace his bones
22:28 bro is about to have five kids missing soon💀
Lol😂
Fr
You got pined
@@The1William_Afton WILLIAM AFTON!??
Edit: OMG OMG OMG THIS THE MOST LIKES IVE EVER GOTTEN!!!! OMG!G!G!G!GGG!!G!! !I GOtr 291 LIKES okmg oEMg SOmg!!! omG OM!V!!! TySSM!! !O!MNG! OMG iRHIS IS THE MIST LIKES iBVE EVER GOtten!N!N!N!N!N! !!! mUm IMF AAMAIOUS im THEGEMOS T LIKES I EE VEERTE GOTTEN!!!!!!! THANK YIU!!!!
What I love about your videos is that you guys do an excellent job of making these high quality conversions look doable for entry level makers. It really makes me want to scratch that creative itch and make some of my own stuff.
That’s great to hear! You totally should. 🤘🏼🤘🏼
@@WickedMakersI wish to do some thing like y’all but I really just make dream catchers so I hope I in prove
I think it would be AWESOME if you made a series making all the main FNAF animatronics, and put them on a stage ready for next halloween! 😂
What's next? A RESTARAUNT??? A PIZZA.. RESTARAUNT??
@@Dangboi52 Possibly!!!
@@Dangboi52 you know it B) but a horror restaurant!
2:37 His Bones Got Crushed And The Metalic Structure Went In Animatronic Mode and the suit was who know how many years old it was probably rusting so it makes sense why a springlock failure happend and he got crushed.
I can't stop coming back to this video. It doesn't matter if I've watched it a million times, it's still as amazing as the first time I saw it.
This is absolutely incredible, and I can't even describe the joy it brings me to watch it all come together.
Great work, guys! Keep it up! ❤
"Why are there intestines around his ackles and in places they shouldn't be"
Well let me give you guys some backstory.
In the lore, mainly the books, specifically Silver eyes, he mentions how springlocked felt like. "Within a split seconds, all the metal from the endo-skelaton with drive straight into you." Also, he was trapped in a storage room for over 30 Years. He was only dead for 15. So about have the time. SInce those 30 years, he says, quote, "I ripped out my organs from the suit, it was so painful, it made me want to die even more." So from this, we can say that he was pulling things out from what they where meant to be. So those organs wrapped around his Feet could've been Vital organs.
When you're springlocked, the eyes from the suit push into your eyes, causing them to either explode, or pop out of their sockets in place for the animatronic's eyes. All his teeth fell out due to the springlocks jabbing his face. The point being that these springlocks covered every INCH of the suit. So therefore everything in him was gone within seconds.
The bone situation. I metioned earlier how Afton was stuck in a room for over 30 Years. His bones could've also fell off. And Fazbear frights? Every single Fazbears Entertainment place was Burned down. Afton was springlocked in the Second Location.. It Was burned downed Then Reconstructed to The Third Location. Afton was also in the second location during the fire. This is what gives the suit it's burned texture.
Wow man thanks I never knew about this information 😮
You're welcome.@@CollinSmith-dt5zp
“Hide if you want, it did not save the others; it will not save you.”
That line was actually chilling 24:41
Damn straight. That's a good fan line right there
@@tanyatheendergirl8987 sorry for being a litle late but thats acually an official line from fnaf ar
@@ΑπόστολοςΛιάμης oh it is? Then it's a real banger
This is so well done. It is so amazing and detailed. And so so Soo realistic❤
Absolutely insane work. I've been active in the horror/music mask scene and this might have given me the push I needed to make something fnaf related on my own. Definitely wouldn't complain about a few extra arm pieces, even if I'd rather display them just for the sheer coolness factor. Great job you guys!
I would love to see a tour of the yard with everything decorated and lit up. That would be a really fun Halloween video.
Right? @wickedmakers , you really could charge admission to your garden on Halloween!
Me and my brother just finished about a 2 week long process of making all of the 5 fnaf character heads out of cardboard, foam, lots of hot glue, and felt for the movie. Can truly say we would not have gotten them done without the inspiration from your channel and the drive for success. Thanks so much and I cant wait to see what you guys make next!
Including balloon boy?
Are you gonna post it?
No not balloon boy but we did bonnie, chica, freddy, foxy, and golden freddy
@pizafox12 we didn't really record the process of making them but we do have pictures I will post
I just posted the results on my channel, me and my brother are planning to remake them to look a bit more accurate
Thank you for your great content 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
I always come back
Been wanting to make a Springtrap costume but this really inspired me to finally get the courage to! Would love to see more ideas from you guys!
Please don’t add spring locks.
I need to make it realistic🫡
@@bejar_dominicDon't add spring locks.
@@bejar_dominicYou should add them. :)
@@DizzyStrawbeary next time just make a fursuit im adding springlocks and forcing my anti furry friends to try it on 👹
Loved seeing your troubleshooting process and that you showed that stuff doesn’t always come together perfectly at first. Turned out great!!
You guys should do sun and moon!! That would be really cool, you could do it for your making your own animatronics, you can give it a spinning head, and like a "huggy wuggy stance"
10:53 it would've been perfect since spring trap doesn't move around that well.
You always raise your own bar. The accuracy was scarily impressive. Also, the purple light was a fun touch 🎃
You guys put so much effort into this build and it totally paid off - he's terrifying! Happy FNAF movie tomorrow and Happy Halloween! 🎃
Thanks!!! We’re so happy with it.
21:44 Pretty darn accurate to the games
Drilling holes through a body to put metal wires in it
Painting it purple is funny though 😅
Fun fact Springtrap’s bones actually got crushed, and the endoskeleton became his bones all the bones got crushed and fell out of the suit, and then his flesh got stuck to the suit 2. The suit did not malfunction the suit actually got activated by water so in the game it shows that the water droplet touched one of the spring locks.
That's pretty horrifying.
Watching this come together was almost as if I was watching Scott Cawthon himself model the actual spring trap into the game. So incredibly amazing how well it came together and watching it turn on gave me chills to see how well it ran with all the weight on top! Maybe one of these days I’ll buy a bamboo printer and make myself a costume out of one of the models, seeing you guys wear some of the pieces made it seem like they were pretty compatable for human wearing, albeit with maybe a bit of tinkering 😂
This is incredible! Looks amazing and it's very impressive it was able to be animated! I love the attention to detail too, with basing him on a skeleton and all the little things like the springlocks.
21:45 Springlocks: they are used to keep the animatronic from falling off the endoskeleton.
This definitely inspired me to make my own Springtrap suit. I learned a lot of methods from this video that I'll probably use from my own. I actually made a Spring Bonnie helmet from some print files I found online with 3D printing. Maybe y'all could send me one of your arm pieces as inspiration for when it comes time to make my own? 🤔 Y'all did a killer job with this though. It's really cool to see something this creative. I hope to see more FNAF content from y'all soon!
PS
if y'all do happen to send me a piece I'll definitely be incorporating it into my costume and featuring it on my channel when it comes time for me to film my Springtrap video😁
Yes yes you deserve it
I wish you luck buddy!
Dont add springlocks or you will always comeback
@@UltimateLifeformX I ALWAYS come back
Thanks T_57powerarmor I wish you a good day
22:58 Springtrap: i have seen unforgetable things...
You clearly have 💀
Yeah Looks Traumatized
Why is the roblox spawn point here
You guys never disappoint with your animatronics! Their absolutely amazing and their very well made. The Springtrap animatronic came out really good and it looked super accurate! Amazing job!
This was so unbelievably cool !!!!! The second they took the skeleton's eyes out and put on Springtrap's head, I was blown away.
I am not the best at creating things out of foam but this really inspired me to try to make a clay version its not finished but it might be after Christmas. Therefore, I think what you have done on this video will help persuade others into following their dream into becoming an artist and let them have the opportunity to do something like this also.
👍
This was awesome! Having to readjust and just stick with it is the best advice for making. We made a DND inspired Halloween display and I was out adding until 2 hours before our wedding on Halloween! The excitement people expressed was so rewarding. I averaged 10-20 trick or treaters for years and this year it was snowing we got around 60-70! More people in the area are decorating and I love it.
2:37 his bones never come back😂😂😂
That’s exactly what I said😂😂😂
Unlike him, his bones don’t come back.
Well you know the bones got crush😊
@@0813787899 true true
"I always come back well atlease my top dose"
Wow, I love it!😍 I’m such a big fan of spring trap! and when I saw this video, I was like “ YASSssSsSs” 😁 Love you guys. I love all the things you guys make 😊! You guys inspire me🤩
This is Incredible! I love how despite the fact that things went wrong, like they do, you persisted and never gave up. Motivation, persistence and patience can make you achieve great things and you should be proud of yourselves. Springtrap looks amazing!
Thanks 🤘🏼🤘🏼😄
I have been thinking about making my own springtrap cosplay lately and found this video! Giving me lots of ideas on how to make it come to life! Thank you!
i love it. I've been working on trying to make a animatronic but it never ends up well so it's nice seeing other people's creations and how amazing they look.❤
I love this vid its so good😕😀😁😁😆😆