Understanding Kv&Ua and Their Role In Powder Coating: With Examples And Setpoints
HTML-код
- Опубликовано: 4 фев 2025
- In this video we go over the definition and application of both Kv and Ua. We also go into how they work with provided examples by spraying parts at high and low values.
At the end of the video we dive into recommended set points for 1st, 2nd, and 3rd coat.
If you guys have any questions feel free to contact me at Mason@Finf.us or checkout our website at firstinfinishing.net
Thanks for watching!!
Excellent video, Thank you!
Perfect video , nice job.
Very good video! Thank you!
Great video. Thank you.
Awesome video! By far explained this the best.
Very cool. Thanks for the video!
Great video!
Well explained. Great job.
Im noticing the UA is always lower than the KV. What would happen if you crank the UA so its higher than the KV?
In between coats are you baking ? Does metal have to be a certain temperature?
Yes, between layers you will need to partial cure the powder.
This means heating the part up until the powder flows out and then quits moving.
This is usually around when the part hits 300 degrees.
Hello friends, A question the configuration of Kv and Ua Can it affect the final finish? That is, it can have orange peel ?
I’m about to buy a powder coating machine. My plan is to be able to powder coat a fence panel.
I’m on a tight budget. I have seen a vevor (Chinese) machine that states 100kv 50W.
What the wattage responsible for? It also states 200ua. Is that a good spec? Obviously not a high end machine but I guess I could use it for a while until I can upgrade. Can you please give me a hint?
There is a 40w version too but I can’t get the difference.
Thank you
Which powder coating gun are you using
The Electron +3 Master M
doyouship to mexico
@@fredhernandez-wf4sk we can!