Oml My teacher showed this video in my class and I enjoyed and Understand more now! I have a Future Project in Electric Circuits so this video helped alot
what kind of bulb can you use? this one looks small. i think you mentioned in another video that this is 2.4 volts? would a standard 60 watt bulb at home depot work?
Very good video sir! Thank you! Though, I have a question: Why are the middles of your batteries taped? I tried looking this up but kept seeing people talking about rather taping over the ends. So just wanted to find out why taping the middle might be a good idea for testing like in the video?
Finally, I have been looking for someone who can explain this stuff and is really understandable. Great Great Great Video, make some more. I love this stuff.
Alright, question. Can you use the battery holder and the lightbulb holder thingy but not the alligator clip wires, instead use the copper wires to connect? Working for a science fair project. Thanks for the help
yes - as long as there is a electrical conductor (like copper) from one end of the battery to the side of the bulb and then from the bottom of the bulb to the other end of the battery, you should be good.
Thank you so much im subscribing for this my science teacher told my group and other groups to turn on a light-bulb with a wire and a battery I couldn’t figure it out so I searched this up thank you so much
it's not positive and negative energy - it's just electric current. However, in order to get an electric current, you have to hook up the wires to both the positive and negative terminal of the battery.
There’s different polarities. And it really does matter Isherwood you use positive and negative. If you Try to jump start a car. And you put the negative on the positive and positive on the negative, you will fry a fuse in the car or even as bad as the ecu. So no it’s not just electronical current. There’s positive and negative for a readon
Wow! Ty so much I have a test now This helped me alot! Oml My teacher showed this video in my class and I enjoyed and Understand more now! I have a Test about Electric Circuits so this video helped alot! :>
I used this for my science project in a way.......... I used a CD taped copper wire on it using electrical tape if anyone asks if the black tape covers the CD i'm just gonna say the color black attracks the sun. I'm gonna tie the battery to the CD with electrical tape and attach copper wire to light a light bulb. ( btw its a model of a solar panel) (IT WORKED :) )
You need a lightbulb with a tiny filament inside - not an LED bulb. Also, some of the bulbs need a higher voltage so that they won't work. If you look on the side, it should say the voltage. You can get a 3.0 volt bulb to work with a D-cell battery.
You forgot putting the mini light in to a lamp socket which would turn the light on for half a second and overloading every type of light into the room leave you in the dark
Hey man, i found a big ass headlight under the seat of an abandoned car and its been preserved because it hasn’t gotten wet or anything, how would I go about turning it on? Could I connect wires and a battery to the back?
If you have a multimeter, I would first check the resistance between the contact points. If you get an infinite resistance, then the bulb is dead. Other than that, you can connect a battery--if it's a car headlight then it probably uses 12 volts.
Наука
Fantastic video! I'm a 40-year old man and this is the simplest & best demonstration I've ever seen of this stuff! 😁
Thank you for helping me do my project
Thank you. I feel like I discovered fire for the first time
lol
🤣
Great explanation sir,.. thnak you so much...
thanks for helping me do my project
this helped with my science quiz thanks
Oml My teacher showed this video in my class and I enjoyed and Understand more now! I have a Future Project in Electric Circuits so this video helped alot
Even me
What name of your school
thanks sir... i really have an interest in all this stuff !
It helps me a lot ❤😊
Thank you!!
Thank you 😊
can u link all the products you used?
what kind of bulb can you use? this one looks small. i think you mentioned in another video that this is 2.4 volts? would a standard 60 watt bulb at home depot work?
thanks, this really helps my science assessment
It helps me too
Me too
Same
Wow that is cool
Thanks 👍
Which one(s) would you explain as open circuit and a closed circuit??
Very good video sir! Thank you!
Though, I have a question:
Why are the middles of your batteries taped? I tried looking this up but kept seeing people talking about rather taping over the ends. So just wanted to find out why taping the middle might be a good idea for testing like in the video?
Finally, I have been looking for someone who can explain this stuff and is really understandable. Great Great Great Video, make some more. I love this stuff.
Learn your grammar before you start commenting!!!
Could I do it with a bigger battery and those square batteries.
my derbi senda sm left rear blinker fell off while i was warming up the engine, this could probably help me put it back to work again 😁
Can a small battery work and can a big bulb work
Wow that helped
Good thing i did this outside the batter went Boom
Thank you very helpful for projects
Oh yeah!
Can you do this same teqniue with buttuns
try as I might, I cannot get any lightbulb to turn on like that. I used 9vs and not a D cell like you did.
Wow
Thumbs up for tryin'! That's an "E" for effort but not an "A." 😅
Alright, question. Can you use the battery holder and the lightbulb holder thingy but not the alligator clip wires, instead use the copper wires to connect? Working for a science fair project. Thanks for the help
yes - as long as there is a electrical conductor (like copper) from one end of the battery to the side of the bulb and then from the bottom of the bulb to the other end of the battery, you should be good.
Rhett Allain Alrighty, thank you
Really helpful learned a lot from the video.
Thank you so much this helped me with my science project, thanks again.
Thank you so much im subscribing for this my science teacher told my group and other groups to turn on a light-bulb with a wire and a battery I couldn’t figure it out so I searched this up thank you so much
Can v connect wires with tape
Very nice
Can I use wire instead of paper clip?
yup
I did this in school and I did it
Using this in Houston. No power or flashlights
Battery frent and back we can keep 3 wires a
Why is the tape around?
pogchamp
\
Wait am I right?
A light bulb can only light up when a positive and negative energy is flowing thorugh it??
it's not positive and negative energy - it's just electric current. However, in order to get an electric current, you have to hook up the wires to both the positive and negative terminal of the battery.
@@rhettallain ohhhh okay sorry I didn't know about that part were learning about electrons in my class
Maybe
There’s different polarities. And it really does matter Isherwood you use positive and negative. If you Try to jump start a car. And you put the negative on the positive and positive on the negative, you will fry a fuse in the car or even as bad as the ecu. So no it’s not just electronical current. There’s positive and negative for a readon
Where did you get the materials for this
"You may have" - excuse me, are we lost in the jungle?!
Just go to the freakin' shop and buy the stuff, then you will certainly have some.
I’m gonna strap this to my bike since my dynamo broke again
Wow! Ty so much I have a test now This helped me alot!
Oml My teacher showed this video in my class and I enjoyed and Understand more now! I have a Test about Electric Circuits so this video helped alot!
:>
I used this for my science project in a way.......... I used a CD taped copper wire on it using electrical tape if anyone asks if the black tape covers the CD i'm just gonna say the color black attracks the sun. I'm gonna tie the battery to the CD with electrical tape and attach copper wire to light a light bulb. ( btw its a model of a solar panel)
(IT WORKED :) )
I'm still struggling with this
The beauty of youtube! I'm learning how to make a gate with lights for my son, hopefully in two weeks we'll be able to make it!
will it work on any lightbulb??
You need a lightbulb with a tiny filament inside - not an LED bulb. Also, some of the bulbs need a higher voltage so that they won't work. If you look on the side, it should say the voltage. You can get a 3.0 volt bulb to work with a D-cell battery.
It is much bigger take smaller it will be better understood
this is make you feel like Nikola Tesla
Better put an compositor to make the volts go down or the lid get on fire and explode shit you off you
What voltage of batteries do i need to light the bulb?
Depend on your bulb
Incandescent: 1.5v
Thx this is our project in scince
Yeah!
I have a bulb where it only works when connecting a 9volt. Will not work using a D battery though. strange?
this helped alot thx
hey btw where did u get the small light bulb cause idk where to find those
Hardware or Junkshop.....
Pov: you are here because it's your science project
yeah lol
We all came here because of a science project like if I’m right (don let it flop)
figured out how to connect a battery to those incandescents when I was 4
But I scared the heck from you lid fall
Someone help me I can not do it I have be trying for the past 13 minutes
Help please
You forgot putting the mini light in to a lamp socket which would turn the light on for half a second and overloading every type of light into the room leave you in the dark
thanks man
Wouldn’t the battery get hot
The battery gets a little hot if you short it (running a wire from one end to the other with no bulb). The wire can get VERY hot - be careful.
pls send the materials needed im kind of deaf because my ears are weak
Rlly?! Poor u
You need : COpper wire , bulb and battery any battery . a battery holder (blue) , Tape? , 2 red wire- , and alligator wire.
Tnx
is this series connection???
I did in my activity mam said good
So, red and black wires dont mean anything at all?!, they are just representational, I have been living in a lie
in school it burnt me
Hey man, i found a big ass headlight under the seat of an abandoned car and its been preserved because it hasn’t gotten wet or anything, how would I go about turning it on? Could I connect wires and a battery to the back?
If you have a multimeter, I would first check the resistance between the contact points. If you get an infinite resistance, then the bulb is dead. Other than that, you can connect a battery--if it's a car headlight then it probably uses 12 volts.