That's sweet man....I have been making rc cars out of things that didn't belong for 30 years and anytime I made a car go that fast and used the old plastic gears that came in it they would melt literally so that is awesome....that car needs a marble floor or concrete slab no bumps at all just scale buildings and it would rule....again nice work..take care my friend 👍 👍👍👍👍
@TestDriverRC no doubt it would man.........35 0r 40% better grip on rear wheels cause if it spins like that on roads it would fling it around like a like the old tilt a whorl....... better grip and I would race against others with that on flat land
@TestDriverRC my bad to message again but the grip on the tires probably would make it melt those original gears though...my bad just thought about it..take care
Thats funny that the gas caps on the passenger side fender instead of drivers side quarter panel. Lol Pretty cool conversion i might have to try since I love Dodge Chargers. Lol
I like it, but I think it would run better with some foam tires or slicks. I think the foam or rubber would have better grip on the road especially with the lack of suspension, and those hard plastic tires that came stock with it look like they just can't take all those little bumps at the increased speed.
I don't remember what company made it but someone made a 1/6 scale toy grade fluorescent green Paul Walker Mitsubishi Evo. I had one about 10 years ago. It was huge. @@TestDriverRC
I haven't seen that Charger, I did get the El Camino. All I've done was take the body off(plan on putting on one of my SCX 24s) - Hopefully will fit. This might need the Gladiator with the longer chassis.. at least you'll have the suspension.
I have countless toy grades (mostly 18th scale) I'm working on upgrading, i nicknamed the process toy grade glow ups lmao. So far the only one completed is the pxtoys 22nd scale buggy
could you ever get it to drive in a straight line. i think i wouldve rather just used the body on a different platform.... just because you can doesnt mean you should lol good good tho
@@Sandtoasty How the Frankenstein is a tough video to make with the uniqueness of whatever project it is.. Can’t teach what you’re still figuring out..
@TestDriverRC I'm just saying the body isnt correct. The rear window is supposed to have like a fin on each side. Only the charger 500, and daytona had a flat back like that. Not a big deal, just an observation.
@ That’s a really good catch! Wow that’s awesome you’re rebuilding the actual car. Quite a project.. I’m rebuilding the front end of my Toyota ia after a head on so I know how big of a task it can be
@TestDriverRC yeah an actual 1970. I really hope it gets finished one day. My dad swapped in a 340 from a sprint car and swapped to 4 speed manual. The engine revs to 10k rpm and has a special built metal on metal clutch made specifically for his car. It sounds so mean.
WPL C24 black wheels + lego lowpro tires fit the 6mm rear axles i did the same thing and used 1/18 tonka police car was probably fsstest toy grade rc car ive ever seen. Handeled terrible though
Few years ago I bought one and shot it with BB guns with my cousin and threw it around and rode a little 50cc minibike over it and it still worked (sorta)
@@williamsolomon602 I have a feeling you haven’t seen our older videos.. our channel was once called ONLYTT02 and we drove only Tamiya. (Tamika’s are plastic too btw) 😉
@@TestDriverRC no. Leave referring to those watching out completely. Sounds far more professional than saying “guys” every other word. That, or if you have to refer to those watching, use a different word each time. I see too many content creators repetitively using “guys” to refer to those watching and it is not only annoying, but makes you sound uneducated. Expand your vocabulary past “guys”. There are tons of other words: ya’ll, folks, everyone, people, etc., etc. it just seems to me that too many content creators over use “guys”. It’s lazy. That’s all. Constructive criticism.
That's sweet man....I have been making rc cars out of things that didn't belong for 30 years and anytime I made a car go that fast and used the old plastic gears that came in it they would melt literally so that is awesome....that car needs a marble floor or concrete slab no bumps at all just scale buildings and it would rule....again nice work..take care my friend 👍 👍👍👍👍
@@telekinesischriswright2540 This Car would Dominate on a Smooth Surface. 🤙
@TestDriverRC no doubt it would man.........35 0r 40% better grip on rear wheels cause if it spins like that on roads it would fling it around like a like the old tilt a whorl....... better grip and I would race against others with that on flat land
@TestDriverRC my bad to message again but the grip on the tires probably would make it melt those original gears though...my bad just thought about it..take care
@@telekinesischriswright2540 If I find a Good Smooth Surface I’ll definitely run this thing till the Gears Melt Off 🤘😝 ⚙️ 🔥
I grabbed that same RC, replaced the windshields with mesh, and modded it to fit on my 1/16 e revo. Because reasons.
@@TheLuckymod13 You Peaked My Interest.. that would be a Little Monster
@@TestDriverRC how would I share a photo the easiest for you?
@@TestDriverRC got it. I posted a photo on my RUclips channel.
@@TheLuckymod13 you can always email us at TestDriverRC@Gmail.com
Awesome!! 😎🤙🏽
Thats funny that the gas caps on the passenger side fender instead of drivers side quarter panel. Lol
Pretty cool conversion i might have to try since I love Dodge Chargers. Lol
@@flyingfortressrc1794 The Orange Supra is next
Frankencharger!!!! Sweet build bro!!! 🔥😎👍
A pinecone/sg/udirc 1603 chassis will fit right under that body. The width and wheelbase are within a couple mm.
to add more control add more weight to front and back of it
😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Bro u and that glue got me rolling
New hobby unlocked for me
@@mysticr3448 Level Up!! New skin unlocked new skill learned.
You are a freaking genius respect
@@FrankBradford-v2b ✈️🧑🔧 🧰 /🚀🧑🔬🧪 🤫
Creative work
I had the same rc and I had the same idea before I saw this video 😂
I like it, but I think it would run better with some foam tires or slicks. I think the foam or rubber would have better grip on the road especially with the lack of suspension, and those hard plastic tires that came stock with it look like they just can't take all those little bumps at the increased speed.
I'll definitely be looking into some new tires for the next video!
Paint it orange and call it the general lee!!!
Ok, this was great! Think you forgot the glue!
GOOOD to know!!! Thanks bud
I Got You
I like ur vibe! I'm subbed. The no suspension thing was hilarious
🤣 it looked funny bouncing the way it did
I have this
I found 3 RC cars in the dumpster 1 with small damage and the other 2 broken but I used for parts and fix the other a T MAXX it's cool to play with 😎💯
YES!! I Love That! Turning Trash into Treasure!! That how I got my XXMAX, SLASH 2WD and KRATON 6s.. Dumpster Finds 👍
I love these conversions! Looking forward to more!! Subscribed🎉
@@fcfva Huh.. What was that?!
You said I should make one brushless..? Okay 🤷♂️
@@TestDriverRC 🙌🙌🙌🙌🙌🙌
I ran it on 3s lmao way too fast bypassed the esc and connected it straight to the battery 😂😂
I did it with the metal body.
Awesome
I have that same rc car, I'm turning it into General Lee
Looks sick actually now u gotta do a paul walker one
Once I find the Orange Supra or Green Eclipse
Yes 👍
I don't remember what company made it but someone made a 1/6 scale toy grade fluorescent green Paul Walker Mitsubishi Evo. I had one about 10 years ago. It was huge. @@TestDriverRC
Bought two one for display
Tyco Super Turbo 4WD is the best hobby grade conversion ever.
@@MustangsCanTurnToo it sounds epic even without the conversation!
Fun Car now!
@@TeamJunkYardDog Made it way more FUN!! I have the itch to do more budget building now
😂 fun to see what I have done
Brian O’Conners Orange Supra Next
I haven't seen that Charger, I did get the El Camino. All I've done was take the body off(plan on putting on one of my SCX 24s) - Hopefully will fit. This might need the Gladiator with the longer chassis.. at least you'll have the suspension.
I’m looking into a SCX24 Gladiator also
I'd say just use the body.. but this time like.. see how realistic it can be made for cheap.
Nice job with upgrade
@@MarcusChatman0 Thanks Bro
I'm impressed 🤔👌
I’m grateful 🥹
NICE JOB!!
@@jeremyrojas8942 it Was a FUN Build
I need a link to that motor! Been doing the same thing just using the stock motor and burning them out. LOL.
@@dantejones4551 It’s the entire electronics system off a brushed Losi Mini-B it actually fit really well!!
I have countless toy grades (mostly 18th scale) I'm working on upgrading, i nicknamed the process toy grade glow ups lmao.
So far the only one completed is the pxtoys 22nd scale buggy
@@thattoyvehicleguy9000 I found a Pink RC Toy by the trash..
time for conversion Deux
Be nice if you smoke the tires
Nice 👍🏾
@@OGRadRC Thank ya, Thank ya very much huuuu Huuuu..
(Elvis Voice)
It's a symptom of the hobby. You do it for the lolz!
@@MysticRiverRC I Can’t just leave it Stock.. Then it’s just like all the other Cars at Walmart..
I’d rather have the “Unique” one ☝️
I only do that for RC car with suspension. It's impossible to run fast without suspension.
@@GF-mf7ml I’ll agree the car would do much better with some springs.
But that’s all Walmart offers so we work with what we got.
That was interesting. Did you ever review watches? I feel like you were about to break out in song, "test the loooom" 😅
@@bigbristv I haven’t done a Watch Review.. I need a watch
I've also done a bunch of conversions.
They Became Addicting
@@TestDriverRC yeah they do.
could you ever get it to drive in a straight line. i think i wouldve rather just used the body on a different platform.... just because you can doesnt mean you should lol good good tho
@@RC4us It would drive straight on a smoother surface. The wheels spin too fast to get grip and just slides the tail out on hard trigger pulls
If you can find better tires it will make a world of difference with control
@@Skateandenjoi New tires and some springs for suspension..
I agree
That’s awesome! Any Teching videos you recommend?
@@Sandtoasty How the Frankenstein is a tough video to make with the uniqueness of whatever project it is.. Can’t teach what you’re still figuring out..
Now return it to walmart for your 24.99 back and the next person gets a surprise
Till the Moms buys 2
Then Timmy is mad at Tommy
@TestDriverRC Tommy is just a lucky mf
$100 worth of upgrades ain't bad at all. Especially if you factor in that you can't buy what you have now.
I mean… the right offer you can buy anything 😉
Nice
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@@carloshnunez Three Thumbs Up!?
Wow it’s must be nice then lol
Thanks Man
Why is the fuel door on the fender and not on the rear quarter panel like it should be. And that Daytona style rear window is horrible
I’ll have to write a strongly worded letter to Walmart about this..
They messed up on the rear window area though. Thats charger 500/Daytona design.
@@divinedriftofficial what do you mean?
@TestDriverRC I'm just saying the body isnt correct. The rear window is supposed to have like a fin on each side. Only the charger 500, and daytona had a flat back like that. Not a big deal, just an observation.
Which is my fav part about the '68-'70 charger. I'm restoring my dad's '70 charger that he used to drag race in the late '70s, early '80s
@ That’s a really good catch! Wow that’s awesome you’re rebuilding the actual car. Quite a project.. I’m rebuilding the front end of my Toyota ia after a head on so I know how big of a task it can be
@TestDriverRC yeah an actual 1970. I really hope it gets finished one day. My dad swapped in a 340 from a sprint car and swapped to 4 speed manual. The engine revs to 10k rpm and has a special built metal on metal clutch made specifically for his car. It sounds so mean.
WPL C24 black wheels + lego lowpro tires fit the 6mm rear axles i did the same thing and used 1/18 tonka police car was probably fsstest toy grade rc car ive ever seen.
Handeled terrible though
@@user-blankman These toy grade RC cars are fun to experiment on but you learn very quickly Hobby grade is where the quality driving experience is
A 19.84lbs servo??? Is it made of osmium or iridium???
@@Raycefan That little thing can do it.. not 20lbs tho.. that’s too much
@@TestDriverRC YOU SAID the servo was a nine KILOGRAM servo, so, naturally, I could only assume it was made of something like Unobtainium
@@Raycefan 9ton would’ve been a bit much..
Did you ever add suspension?
Never added any sort of suspension but I don’t think I want to invest more into it.. I’ll have to find some smoother surface for it so drive better
Try it on carpet!!!
Many votes for this.. maybe we will
You're gonna need a gyro in that bad boy.
@@DSPIC444 some slices and a gyro would be PERFECT on this rig.
I have a few different bodies for my latrax rally from walmart
@@SlideCityHotwheels I have a few Mini Slash Bodies too..
Nothing to put them on though
Try squeezing the body on a mini B or a losing nascar
Subscribed
@@johnlujan8706 You’re The Best
😯🤔😅😅😎👍
@@richardbrown6762 I know huh
Few years ago I bought one and shot it with BB guns with my cousin and threw it around and rode a little 50cc minibike over it and it still worked (sorta)
@@poggie_ Usually I drive them..
But that sounds like so much Fun..
@@TestDriverRC oh it was definitely fun, we drove them too and rode the hell out of them
@@poggie_ new video idea 💡
Where can i order that
Can't upgrade everything except the suspension and tires think it's gonna drive good.
@@toolbaggers I might be about to squeeze a spring in there, but the stock setup doesn’t allow much room for upgrades when it comes to the suspension
my dude needs a gorilla glue sponsership
#gorillaglue
Guys please...try to find a way to ditch that pos chassis and just use the body. That chassis is worthless!
Yes. But now we know for sure 👍
PLASTIC CHASIS TOO BRITTLE…GET A TAMIYA , ABOUT 20BUCKS MORE AND COMES WITH ESC AND MABUCHI MOTOR… AND THE SWEET BODY YOU CHOOSE…
@@williamsolomon602 I have a feeling you haven’t seen our older videos.. our channel was once called ONLYTT02 and we drove only Tamiya.
(Tamika’s are plastic too btw) 😉
@@TestDriverRC BEEN USING TAMIYA SINCE THE 80s…
Also, say “guys” less.
@@Raycefan should I start saying Ya’ll? Lol
@@TestDriverRC no. Leave referring to those watching out completely. Sounds far more professional than saying “guys” every other word. That, or if you have to refer to those watching, use a different word each time. I see too many content creators repetitively using “guys” to refer to those watching and it is not only annoying, but makes you sound uneducated. Expand your vocabulary past “guys”. There are tons of other words: ya’ll, folks, everyone, people, etc., etc. it just seems to me that too many content creators over use “guys”. It’s lazy. That’s all. Constructive criticism.
@@Raycefan Absolutely love the feedback. 😉👍
Thanks, I’ll definitely adjust accordingly