Just wanted to say thank you for this video. It was the comment about the door switches triggering the fuse that meant I could fix my microwave! Really appreciate you shared this info.
I'm glad I could help! I didn't film the door switch part, but I explained it at the end of video. Nobody watches the end of video, so it was failure on my side. But I'm happy that I mentioned that in comments!
Crosshead, just normal screwdriwer. It is better open from back. There are lots of screws, but it is better. Replace fuse and tighten DOOR SWITCH screws. There are THREE door switces. Up, middle and bottom switch mount screws. They get loose over time.. After that device is fixed! Door switches need to operate simultaneously. If not, the fuse blows, it is safety system. No need to replace anything else but fuse.
@SnapTinker Thanks for your reply I checked the fuse and its working seems the door switches are stoping the microwave/oven from starting there are 3 Next is to find how to verify those
All switchers tested with multimiter and working and both fuses as well not sure why it doesn't allow to start after I choose the program Only start button is not working
Is your devise totally dead? Does the light work, does the control panel power, does the motor spin? I would check the thermal fuse, but you have probably done that? If control panel gets power, the start button may be broken?
@SnapTinker device is not totally dead it start you can choose the program .the control panel is working fine except the start button (touch panel ) .thermal fuse tested and working fine. Unless there is a hidden fuse, I don't see any problem. Will try to add pics later on
Just wanted to say thank you for this video. It was the comment about the door switches triggering the fuse that meant I could fix my microwave! Really appreciate you shared this info.
I'm glad I could help! I didn't film the door switch part, but I explained it at the end of video. Nobody watches the end of video, so it was failure on my side. But I'm happy that I mentioned that in comments!
Wich screwdriver type I should use can you give a link so I can buy similar
Crosshead, just normal screwdriwer. It is better open from back. There are lots of screws, but it is better. Replace fuse and tighten DOOR SWITCH screws. There are THREE door switces. Up, middle and bottom switch mount screws. They get loose over time.. After that device is fixed! Door switches need to operate simultaneously. If not, the fuse blows, it is safety system. No need to replace anything else but fuse.
@SnapTinker
Thanks for your reply
I checked the fuse and its working seems the door switches are stoping the microwave/oven from starting there are 3
Next is to find how to verify those
All switchers tested with multimiter and working and both fuses as well not sure why it doesn't allow to start after I choose the program
Only start button is not working
Is your devise totally dead? Does the light work, does the control panel power, does the motor spin? I would check the thermal fuse, but you have probably done that? If control panel gets power, the start button may be broken?
@SnapTinker device is not totally dead it start you can choose the program .the control panel is working fine except the start button (touch panel ) .thermal fuse tested and working fine.
Unless there is a hidden fuse, I don't see any problem.
Will try to add pics later on