Hooked my tech2 up to the car and it magically fixed its self. Literally prior to attaching the tech2 I jump wired the caddy. Attached the tech2. Ran the test you did. All was working. Turned off car figuring the car wouldn’t start but the key came out no issue and when I put it back in started right up. Been working all day so far.
Funny reading the negative comments lmfao. People you dont understand this is the basics of how the system works. You need more knowledge before leaving a dumb comment making your self look stupid. Awesome video it helped me get the job done!
What is your opinion about the different Tech 2 scan tools that are available. Would the cheaper priced copies from China do the troubleshooting that you're doing in this video?
Customer complained with bunch of codes U0101, U0100, P0462, U0073 on 2013 Nissan Pathfinder after he said/blamed me aft I hooked up my SBB PRO2 programmer and got 'ECU not found' a few times. Can runs ok . He tried to disconnect battery and reconnect but engine lights came back. Any advise why - bad ECU?
You didn't write in the description what the details were; what module was the problem; and what fixed it. edit your description and do what you said please.
The Flat Rate Mechanic I have a 2002 nissan altima and the car dies when i disconnect the battery and the cluster lights and gages don't work...you think the cluster maybe the problem?
I have a 2005 Nissan Sentra 1.8l 164k miles. I was previously getting the P0455 code for a EVAP. I replaced the Vent Control Check Valve on the purge canister and that didnt fix it. I been driving it just fine with no issues. I then went to drive it yesterday morning after I drove it for about a hour and it would go out of 1st gear and had a major power loss. Still cranks up and runs though. I went to Pull a part and got a different ECM and the check engine light is still on with the same code U1000 and U1001. Any advice please? Everything works on the car. Runs great.
Well this code could be anything wrong with wires connecting to blown head gaskets, so don't just start to tear down your vehicle apart without doing more diagnostics.
Working with 2002 Envoy right now, can't duplicate while plugged in, unplugged my scanner and multiple failures at com fail, HVAC com fail, motor A/B circuit malf. EBCM com fail....36 + codes....scan reset all goes away until I unplug Autel mk808bt.
I have a u1000 diagnostic code on my 2002 Infiniti Q45 I can't find any mechanics that will touch it around here can you give me any ideas or tips with it could be what it's doing is keeping my gauges from working only gauge works as my fuel gauge but my speed my tack temperature and the Tiptronic shifting doesn't work
@@waqarkhan1432 can I also take your whats up number? 07 M35. No start. Onl communication is with ECM ABS Airbag nd TCM. All other module communication fails nd not able to read anything. It is as if the scanner is not connected
![How to Fix P0420 Engine Code in 3 Minutes [3 Methods / Only $19.99]](/img/1.gif)
U1000 code is usually 9 out of 10 a faulty battery, camshaft positioning sensor or powertrain control module
Thank you soo much everything online was a waste of info and time for me thank you!!!
Great video thanks. Got that code today u1000 of a infinity no start.😁
Hey I got the smae code in my car did u figure it out?
@@colekress3308 did you figure yours out? Mine just turned on
07 Sentra u1000 code won't run. Turns over. Replaced ECU. Same thing. Any idea?
@@johnathanbeats bcm maybe? im trying to figure mines out it wont start either
@@shunplayz7500 ended up being a fuze. check all fuzes.
Hooked my tech2 up to the car and it magically fixed its self. Literally prior to attaching the tech2 I jump wired the caddy. Attached the tech2. Ran the test you did. All was working. Turned off car figuring the car wouldn’t start but the key came out no issue and when I put it back in started right up. Been working all day so far.
Funny reading the negative comments lmfao. People you dont understand this is the basics of how the system works. You need more knowledge before leaving a dumb comment making your self look stupid. Awesome video it helped me get the job done!
What is your opinion about the different Tech 2 scan tools that are available. Would the cheaper priced copies from China do the troubleshooting that you're doing in this video?
Customer complained with bunch of codes U0101, U0100, P0462, U0073 on 2013 Nissan Pathfinder after he said/blamed me aft I hooked up my SBB PRO2 programmer and got 'ECU not found' a few times.
Can runs ok . He tried to disconnect battery and reconnect but engine lights came back.
Any advise why - bad ECU?
Sbb messed up the ECU
video is irrelevant you have shown nothing gj JJ Abram
You didn't write in the description what the details were; what module was the problem; and what fixed it. edit your description and do what you said please.
EXACTLY
good tip was it the pcm pulling down class 2
It ended being the Instrument cluster.
The Flat Rate Mechanic I have a 2002 nissan altima and the car dies when i disconnect the battery and the cluster lights and gages don't work...you think the cluster maybe the problem?
I have a 2005 Nissan Sentra 1.8l 164k miles. I was previously getting the P0455 code for a EVAP. I replaced the Vent Control Check Valve on the purge canister and that didnt fix it. I been driving it just fine with no issues. I then went to drive it yesterday morning after I drove it for about a hour and it would go out of 1st gear and had a major power loss. Still cranks up and runs though. I went to Pull a part and got a different ECM and the check engine light is still on with the same code U1000 and U1001. Any advice please? Everything works on the car. Runs great.
I have a Nissan Pulsar 1.6L. similar to the Sentra. I also have the same codes as yours too. How did you go with yours?
Well this code could be anything wrong with wires connecting to blown head gaskets, so don't just start to tear down your vehicle apart without doing more diagnostics.
Working with 2002 Envoy right now, can't duplicate while plugged in, unplugged my scanner and multiple failures at com fail, HVAC com fail, motor A/B circuit malf. EBCM com fail....36 + codes....scan reset all goes away until I unplug Autel mk808bt.
Thanks
When you say communication, what exactly do you mean?
I have a u1000 diagnostic code on my 2002 Infiniti Q45 I can't find any mechanics that will touch it around here can you give me any ideas or tips with it could be what it's doing is keeping my gauges from working only gauge works as my fuel gauge but my speed my tack temperature and the Tiptronic shifting doesn't work
Where is your car and you where . Take my WhatsApp nomber 00968 90300535
You are lucky. Mine wont even start. Its been sitting for 8months
@@waqarkhan1432 can I also take your whats up number?
07 M35. No start. Onl communication is with ECM ABS Airbag nd TCM. All other module communication fails nd not able to read anything. It is as if the scanner is not connected
@@CBRRR-eh3ky did you check if you have a blown ECCS fuse?
@@avpng no. 2hat does Eccs stand for. Thanks for replying
Useless
I want learn something from you
hE HAS TO LEARN FIRST
I got 98 s10 Chevy got a u1000 code
What was it
What's a u1000
👍
Pongase a resar eso es muy rapido