For anyone wondering how to update your old goldhen. Upload the newest bin file into root of USB, plug it into your ps4 and run your exploit like normal. New bin file will be updated
Man, so glad I have 9.00 and don't need to use pppwn and have full access to my LAN. Cool for those on 9.60 or newer, at least after the initial setup - the internal mod seems to be the better option however, to get back access to the LAN port.
This. I got a PS4 Pro for free from my friend on 8.00. Researched a lot and super glad I upgraded to 9.00 and stuck with it. Made a magic USB and spun up a NGINX docker container to self-host the payload - no external dependencies and my LAN port is free
@@sioh3FTP, LAN Play with another PS4 or over VPN, possibly RetroNAS or some similar solution where you can launch games from a server on your network (multi/webman on PS3 can do this), etc.
Ssme man. I remember coming back from college and was literally about to update my ps4 pro but I saw a video in my feed about the latest firmware update for 9.00 and I was luckily on that firmware. So I was like "might as well try this". Turned out to be the most stable and reliable firmware.
If you have difficulty crushing ps4 or rebuild db constantly with this pre build img you should try manual old versions of LF also if you have older one that dont need pasword ppp stay on it its usualy better dont shut down or crush console often 10.00 PS4 SLIM
i have problem when successfuly load gold hen its shows ''''lan cable not connected''' and ip adress change to automatic the web server not working after that
Going by the comments, Multiple people are having the same issue, after the goldhen payload is executed by the luckfox and once the luckfoxed popup Arrives the ip address goes blank and then cant access the webserver. Kindly address the issue and give us a solution. Ps4 11.00 for me, was using older version , same as ur video on how to use luchfox without sd card.eq
Go to the GoldHEN settings menu then select Settings and make sure Disable PPPoE patch is unchecked. It should be disabled by default but if anyone has enabled this option it will block the pppoe connection when GoldHEN runs.
@@MODDEDWARFAREThere is only Enable Pppoe Patch in the Golhen Setting menu which has been selected but after selecting and unselecting same issue occurs
@@rajdeepsingh2917 Yes that option should be unchecked. User ID and password should be ppp for web server to work with everything else set to default and the correct build image for your device installed.
I am facing issue in the internet browser as it shows ooooooo error, Ssl.error 0x00000, couldn't resolve host name, even after selecting and unselecting Enable PPPoe Patch in Goldhen setting menuand didn't pop-ups any further page what I can do to fix it. I am using luckfox Pro/Max version on my PS4 PRO 11.00 firmware.
Is there any benefit to being on 11.0 firmware versus the 9.0 firmware? Also, how do those two compare to an older version, like say 5.05.. I jailbroke my PS4 a few years back and haven’t updated it since, was wondering what benefits I would have by updating to a newer CFW
There is no CFW. And honestly, there's not much difference, you can't use usb to exploit on 11.00 but it's easier with luckfox Pico sometimes faster. No need to backport majority of games since firmware is newer, higher updates
@ sorry, I meant to ask if there was any benefits to updating to a newer exploitable firmware..but I suppose you’re saying it’s just the fact that games released after whatever firmware I’m on (I believe I’m on 5.05) need to be back-ported to work? The exploit I’m using is with an ESP32 board which has a web-server/built-in wifi access point and has the payloads flashed onto it, so all I do is just load up the web browser and it serves the exploit..I’ve also only used it to dump whatever games I physically own, then install them to the internal drive, so I don’t have to use the optical drive..and I haven’t noticed any games which require a newer firmware..but I haven’t bought anything for the PS4 in several years. Are there certain games that I’m missing out on by not being on a higher firmware ..that also wouldn’t have back-ports available? And also, are there any other payloads worth having that wouldn’t be on an older jailbreak..which would warrant updating to 9.0 or 11.0? Thanks for the reply btw.
Good afternoon, I bought a mini A, I did the procedures, but when I go to test it on the PS4 it says that it didn't identify the IP, would you have any idea how to solve it?
Is the ESP8266 no longer viable for the newer exploits for some reason? Not enough storage? It was popular a couple years ago with 6.xx/7.xx jailbreaks.
If you dont have constant rebuild crashes or turnoff of ps4 i will sugest you stay on it becouse from my experience this is not better on some models you will have difficulties more time to load jb or something else
@@eticetic7262 okey well i dont have much crashes and stuff but it is often long time befor it succes . The other consol craches sometimes when it load goldhen but other then that its only take some time befor it load goldhen Both are slim models on 11.00 but difrent versions
That is what i telling you on some models works great others crushes i had crushes on 9.6 and update it tto 10.00 it was better a lot with older luckfox fast jb on plus luckfox but i wanted to update on this newer and had few crushes and some problems to make it close like before Also ps4 dont like constantly removing LF so there maybe a problem and LF+ maybe better i have pro and max< take loong time just to execute in start up and to flash Try for that who crush more ipv 6 or first one withch is faster
Is it possible to do this on the P4 Device I purchased? My understanding is that it's a Luckfox device they use just not sure which version the P4 uses
Random question if i have a ps4 on lets say 11.00fw but i wanna upgrade the hard-drive will i run into any issue when i turn it on it will for me to update or anything ?
@Modded_Warfare I would like to ask you a question. My PS4 model is the one known as the “Problem Model” and necessarily the only PPPwn that works is PPPwn IPv6, and I am saying this because I bought a P4Tool and configured it following the steps in your Video Tutorial and everything went well. I am currently using version 1.1.2 with PPPwn IPv6, and I was thinking about updating P4Tool to the latest version released, which is 1.2.5 (with NO Web Server), and what I am having doubts about is whether in this new version 1.2.5 there is the possibility of using PPPwn IPv6, do you understand my doubt? My question is because in the version I am currently using, 1.1.2, according to your Video Tutorial, I was able to CHOOSE the IPv6 option during the Configuration, while in this newer version 1.2.5 (with NO Web Server) you only need to burn the Image and there is no further configuration, do you understand? And every time I use the standard version of PPPwn my console crashes 100%, it only works in the IPv6 version, and because in this new version 1.2.5 only the image is burned and nothing else, I was left with this doubt about how I would (in this new version 1.2.5) use the correct PPPwn, which in my case, only PPPwn IPv6 works. I Think that my question is not confusing, but the fact is that before proceeding with the update of my P4Tool, I would like to know if you know anything about this?? (New version and IPv6) Thank you very much for your attention and congratulations on your videos, they are very useful and very easy to understand. Thanks
Just instal web server version, config to IPv6 version, enable Auto start option and shutdown after jailbreak. And your luckfox already like no webserver version
Just instal web server version 1.2.5 with enabling feature like IPv6, auto jailbreak on booting, and shutdown after jailbreak. And it's already like no webserver version.
@@muhammadalireza3957 I think it will be the best idea, because the intention was to update to this new version 1.2.5 but in the version WITHOUT Web Server, and I was unsure about how to choose the IPv6 version of PPPwn in the version WITHOUT WEB SERVER, but you are right. I think it is as you said, better to install the version WITH Web Server directly, because at least in this version I am sure that I will not have any problems with IPv6, since in the version WITH Web Server there is certainly the option to choose PPPwn in IPv6 Thanks for the tip
@@muhammadalireza3957 I think it will be the best idea, because the intention was to update to this new version 1.2.5 but in the version WITHOUT Web Server, and I was unsure about how to choose the IPv6 version of PPPwn in the version WITHOUT WEB SERVER, but you are right. I think it is as you said, better to install the version WITH Web Server directly, because at least in this version I am sure that I will not have any problems with IPv6, since in the version WITH Web Server there is certainly the option to choose PPPwn in IPv6 Thanks for the tip
currently i use a minipc running windows because i can't get pppwn to actually exploit on linux. might pick one of these up so i can ditch windows on this pc finally.
@@eticetic7262 lol the reason we comment like that is people like this will update and then complain non stop about updating and how bad it is or when is there firmware jailbreak coming it gets annoying I been seeing it for at least 15 years lol 😂
hi, I don't follow the jailbreak news anymore, I still have my ps4 in 4.55, is it worth leaving it in 4.55 or should I upgrade it? besides I didn't understand everything because English is not my strong point, but is the online mode accessible on ps4 jailbreak? thanks in advance.
@@MagneticC7 I had a same problem on fat beside others on brother in law ps4 Fat 9.00 becouse that o decided to make him another usb its more repayable then this
@yeltsinr381 If I am waiting for a Jailbreak and I am on the lowest firmware that I can possibly be on, why on Gods green earth would I update to a higher firmware ?
This channel has a good tutorial for it - "how to revert the PS4 to a previous firmware". But it depends on a couple of things. You can downgrade firmware on a PS4 but only if your PS4 has a certain chip type. Some PS4s can't be downgraded currently. If your PS4 does have the right chip type, you can only downgrade back to the firmware it had before its current one. So if you're on 11.00 and the version you had when you updated to 11.00 was 9.00, then you can go back to 9.00. But if you updated from say 10.50 to 11.00 then you can only revert it to 10.50 and can't downgrade it any further. I don't know if there's a way to find your chip type without opening up your PS4. I also honestly don't know if there's a way to tell what the earlier version was before downgrading, apart from guessing based on how often you used your ps4 or had it connected to wifi. If you downgrade and it brings you to an earlier firmware than 9.00, I believe there are ways to then update your PS4 to 9.00 specifically using a USB stick and a copy of the firmware. The process for doing the downgrade is pretty complicated. It requires specific bits and bobs that you probably won't have lying around, and you'll need to have good soldering skill. I hear you can't do a USB jailbreak exploit on 11.00 while you can on 9.00, but imho staying on 11.00 and using picofox to jailbreak your system will be way easier than reverting to 9.00. So long as you don't update your PS4 any further, you can always try that downgrade path later. To be honest unless there's something about 9.00 that you need to do some kind of modding or homebrew, I don't think it will ever be worth it to downgrade from an 11.00 PS4. I've been looking into downgrading for a while because I have an 11.02 PS4, and I haven't found any other method to downgrade. I'm gonna wait maybe 6 more months for an 11.02 jailbreak before trying the downgrade myself. I already have soldering equipment and enough experience with soldering, but I'd still rather not have to buy the parts and go through with all the work involved.
Hi mate, I wanted to contact you through the comments because you’ve just recently uploaded a video I’m really struggling with the RGH3 on my Xbox 360 slim I did the 10k resistor wire and put them in the proper places The Nan read well and the Zelle wrote well, including the files which was done on Jay Runner But the problem of having as it won’t boot up, I’m not sure if it’s my wiring or my soldering or it’s a dodgy Jay runner and it’s corrupting what’s going on Can you please give me some advice or guidance on what to do? This is something I really want to do and it’s really frustrating me. The first time I did it before It asked for the CPU key and it said it was wrong and it just caused absolute havoc I’m in desperate need Happy New Year From chappers Mr. Mario’s videos are amazing and the content I’ve learnt of doing the PS3 was easy, but the RGH three seems to be a lot more difficult.
2025 and nothing new came.... very strange start to new year as usually LOAAADS of stuff is announced or released, so bad Modded Warfare is making the same videos...again....
It’s more just about having the ability do say emulate games or back your own games up, also installing Linux, a jailbroken ps4 is good for people who only have console money but want to play PC games or old games
11.02 - 12.00 brothas we must stay strong and patient, it will release eventually, stay strong
I updated last christmas 2023 for my nephews to play... biggest mistake ever been waiting since March2024 at 11.02 FW SAD
Just downgrade your PS4
at this point is wiser to buy a second hand ps4 with a jailbreakable fw and sell the one with the recent updates
Theres always the stupid tsaying "positive"
Forget it
Console is 11 years old, move on
@@christopherbolis2048 yeah I guess that's better idea
For anyone wondering how to update your old goldhen.
Upload the newest bin file into root of USB, plug it into your ps4 and run your exploit like normal. New bin file will be updated
No need to update the stage2 file?
Will it make it faster ? mine takes around 6-10 minutes sometimes
@@Jion-c2e No, only goldhen dot bin
@@rishabhchand9848for me its faster than the old 5min max
Thank you for this tutorial, time and effort that you put into this subject
Man, so glad I have 9.00 and don't need to use pppwn and have full access to my LAN. Cool for those on 9.60 or newer, at least after the initial setup - the internal mod seems to be the better option however, to get back access to the LAN port.
And why do you need a lan cable for a jailbroken ps4?
This. I got a PS4 Pro for free from my friend on 8.00. Researched a lot and super glad I upgraded to 9.00 and stuck with it. Made a magic USB and spun up a NGINX docker container to self-host the payload - no external dependencies and my LAN port is free
@@sioh3FTP, LAN Play with another PS4 or over VPN, possibly RetroNAS or some similar solution where you can launch games from a server on your network (multi/webman on PS3 can do this), etc.
Ssme man. I remember coming back from college and was literally about to update my ps4 pro but I saw a video in my feed about the latest firmware update for 9.00 and I was luckily on that firmware. So I was like "might as well try this". Turned out to be the most stable and reliable firmware.
If you have difficulty crushing ps4 or rebuild db constantly with this pre build img you should try manual old versions of LF also if you have older one that dont need pasword ppp stay on it its usualy better dont shut down or crush console often
10.00 PS4 SLIM
9.00 pro is still the bomb, i still have a 9.01 pro maybe i’m gonna update that one. And bought a phat 5.01 ps5 for the future.
damn i got memorie of his xbox 360 tutorial series....good days man
Any PS Portal News? Cant use it for a year now because i want to stay at 2.0.5
Would like a tutorial how to setup PPPoE server on OpenWRT for internet access
Bro after jailbreak I want connect internet connection for pslan how to update block bro 🤔🤔🤔
i have problem when successfuly load gold hen its shows ''''lan cable not connected''' and ip adress change to automatic the web server not working after that
Going by the comments, Multiple people are having the same issue, after the goldhen payload is executed by the luckfox and once the luckfoxed popup Arrives the ip address goes blank and then cant access the webserver.
Kindly address the issue and give us a solution.
Ps4 11.00 for me, was using older version , same as ur video on how to use luchfox without sd card.eq
Go to the GoldHEN settings menu then select Settings and make sure Disable PPPoE patch is unchecked. It should be disabled by default but if anyone has enabled this option it will block the pppoe connection when GoldHEN runs.
@@MODDEDWARFAREThere is only Enable Pppoe Patch in the Golhen Setting menu which has been selected but after selecting and unselecting same issue occurs
@@rajdeepsingh2917 Yes that option should be unchecked. User ID and password should be ppp for web server to work with everything else set to default and the correct build image for your device installed.
I am facing issue in the internet browser as it shows ooooooo error, Ssl.error 0x00000, couldn't resolve host name, even after selecting and unselecting Enable PPPoe Patch in Goldhen setting menuand didn't pop-ups any further page what I can do to fix it. I am using luckfox Pro/Max version on my PS4 PRO 11.00 firmware.
Is there any benefit to being on 11.0 firmware versus the 9.0 firmware?
Also, how do those two compare to an older version, like say 5.05..
I jailbroke my PS4 a few years back and haven’t updated it since, was wondering what benefits I would have by updating to a newer CFW
There is no CFW. And honestly, there's not much difference, you can't use usb to exploit on 11.00 but it's easier with luckfox Pico sometimes faster. No need to backport majority of games since firmware is newer, higher updates
@ sorry, I meant to ask if there was any benefits to updating to a newer exploitable firmware..but I suppose you’re saying it’s just the fact that games released after whatever firmware I’m on (I believe I’m on 5.05) need to be back-ported to work?
The exploit I’m using is with an ESP32 board which has a web-server/built-in wifi access point and has the payloads flashed onto it, so all I do is just load up the web browser and it serves the exploit..I’ve also only used it to dump whatever games I physically own, then install them to the internal drive, so I don’t have to use the optical drive..and I haven’t noticed any games which require a newer firmware..but I haven’t bought anything for the PS4 in several years.
Are there certain games that I’m missing out on by not being on a higher firmware ..that also wouldn’t have back-ports available?
And also, are there any other payloads worth having that wouldn’t be on an older jailbreak..which would warrant updating to 9.0 or 11.0?
Thanks for the reply btw.
I have the 9.00 usb jailbreak. It’s a meter version better now? Also what is better about this adapter then method I used few years ago?
Good afternoon, I bought a mini A, I did the procedures, but when I go to test it on the PS4 it says that it didn't identify the IP, would you have any idea how to solve it?
Is the ESP8266 no longer viable for the newer exploits for some reason? Not enough storage? It was popular a couple years ago with 6.xx/7.xx jailbreaks.
@MODDEDWARFARE Can you make a video how to do this when you already have a older pppoe installed on the luckfoxpico?
Just Re-Flasing the images. thick Reset Before download. Using scp toolkit on video.
@@muhammadalireza3957 okey thx i will look that up 👌
If you dont have constant rebuild crashes or turnoff of ps4 i will sugest you stay on it becouse from my experience this is not better on some models you will have difficulties more time to load jb or something else
@@eticetic7262 okey well i dont have much crashes and stuff but it is often long time befor it succes .
The other consol craches sometimes when it load goldhen but other then that its only take some time befor it load goldhen
Both are slim models on 11.00 but difrent versions
That is what i telling you on some models works great others crushes i had crushes on 9.6 and update it tto 10.00 it was better a lot with older luckfox fast jb on plus luckfox but i wanted to update on this newer and had few crushes and some problems to make it close like before Also ps4 dont like constantly removing LF so there maybe a problem and LF+ maybe better i have pro and max< take loong time just to execute in start up and to flash Try for that who crush more ipv 6 or first one withch is faster
Is it possible to do this on the P4 Device I purchased? My understanding is that it's a Luckfox device they use just not sure which version the P4 uses
Random question if i have a ps4 on lets say 11.00fw but i wanna upgrade the hard-drive will i run into any issue when i turn it on it will for me to update or anything ?
Do I have to format the part I have or will it program itself?
@Modded_Warfare I would like to ask you a question. My PS4 model is the one known as the “Problem Model” and necessarily the only PPPwn that works is PPPwn IPv6, and I am saying this because I bought a P4Tool and configured it following the steps in your Video Tutorial and everything went well. I am currently using version 1.1.2 with PPPwn IPv6, and I was thinking about updating P4Tool to the latest version released, which is 1.2.5 (with NO Web Server), and what I am having doubts about is whether in this new version 1.2.5 there is the possibility of using PPPwn IPv6, do you understand my doubt?
My question is because in the version I am currently using, 1.1.2, according to your Video Tutorial, I was able to CHOOSE the IPv6 option during the Configuration, while in this newer version 1.2.5 (with NO Web Server) you only need to burn the Image and there is no further configuration, do you understand?
And every time I use the standard version of PPPwn my console crashes 100%, it only works in the IPv6 version, and because in this new version 1.2.5 only the image is burned and nothing else, I was left with this doubt about how I would (in this new version 1.2.5) use the correct PPPwn, which in my case, only PPPwn IPv6 works.
I Think that my question is not confusing, but the fact is that before proceeding with the update of my P4Tool, I would like to know if you know anything about this?? (New version and IPv6)
Thank you very much for your attention and congratulations on your videos, they are very useful and very easy to understand.
Thanks
Just instal web server version, config to IPv6 version, enable Auto start option and shutdown after jailbreak.
And your luckfox already like no webserver version
Just instal web server version 1.2.5 with enabling feature like IPv6, auto jailbreak on booting, and shutdown after jailbreak.
And it's already like no webserver version.
@@muhammadalireza3957 I think it will be the best idea, because the intention was to update to this new version 1.2.5 but in the version WITHOUT Web Server, and I was unsure about how to choose the IPv6 version of PPPwn in the version WITHOUT WEB SERVER, but you are right.
I think it is as you said, better to install the version WITH Web Server directly, because at least in this version I am sure that I will not have any problems with IPv6, since in the version WITH Web Server there is certainly the option to choose PPPwn in IPv6
Thanks for the tip
@@muhammadalireza3957 I think it will be the best idea, because the intention was to update to this new version 1.2.5 but in the version WITHOUT Web Server, and I was unsure about how to choose the IPv6 version of PPPwn in the version WITHOUT WEB SERVER, but you are right.
I think it is as you said, better to install the version WITH Web Server directly, because at least in this version I am sure that I will not have any problems with IPv6, since in the version WITH Web Server there is certainly the option to choose PPPwn in IPv6
Thanks for the tip
With the jailbreak will you be able? To go back on different accounts and will it save everything on the other account
Which is preferable if you have FW 9.00, this ‘Luckfox Pico’ or ESP32?
It's been a one year I'm waiting for 11.50 jailbreak
11.50 came out March 13, 2024. Unless you're a time traveler you haven't been waiting a year.
I'm still waiting for it but I might look into a 1.0p ps4 pro
Hi, can i back up saves from my jailbroken ps5 to my normal ps5 with ps plus back up or not?
After doing this, will i be able to install ItemzFlow and play backup games?
i think the easiest way is to have an usb to rj45 dongle. you can do directly or you can bridge and share IE. win win.
currently i use a minipc running windows because i can't get pppwn to actually exploit on linux. might pick one of these up so i can ditch windows on this pc finally.
Just bought a ps4 with a luck fox chip, am I able to connect to the internet without signing into psn without anything messing up?
If "PPPwn IPV6" shuts down youre ps4 while jailbreaking, just deselect it...can I have an explain pls why it happens on my ps4 ?
mate ive got 11.50 firmware just ordered the pico can this be jailbreak yet ???
Litrally in my mind,video drops wonder i live in matix gwd
Where? Where is jb for 55.50 - 69.00 versions? I can't wait for them. Please, release it, i just wanna install phub on it!
I have a ps4 9.0fw and looking into an auto jb method. Would this be the best method for auto jb for 9.0fw?
Which video explains what all the goldhen payloads do?
Im on 9.60. Can I have the both Luckfox PPPwn and Normal internet cable at the same time?
you should unplug the luckfox cable and plug and set up the normal one, then switch again when you need pppwn
Thanks!
any news ps5 7.40 🙏🙏🙏🙏
That's actually a very good ngl
Does the USB JB for v9.00 work on v11? And is it worth upgrading to 11? My own guess being no as it doesn't look like there'll be a cfw coming.
I believe the consensus is to stay on 9.00 if you can, no reason to update at all 👍
No. Usb only is 9.0
Best fw is 5.05, 9.0 and then 11.0
Yea I would stay on 9.0 it's gonna have the most homebrew options and reliability over 11.0
STAY ON 9.00 SEE MULTIPLE COMENTS 😂
@@eticetic7262 lol the reason we comment like that is people like this will update and then complain non stop about updating and how bad it is or when is there firmware jailbreak coming it gets annoying I been seeing it for at least 15 years lol 😂
where's 4.50 & 4.51 ps5 hypervisor full jb?
What New for jailbreak PS5 in 7.61 ?
From all the hardware that can be used to jailbreak the PS4 so far, which one the quickest?
This one
hi, I don't follow the jailbreak news anymore, I still have my ps4 in 4.55, is it worth leaving it in 4.55 or should I upgrade it? besides I didn't understand everything because English is not my strong point, but is the online mode accessible on ps4 jailbreak? thanks in advance.
Update to 9.00
UPDATE TO 9.00 BUT BE CAREFUL WATCH MULTIPLE VIDEOS TO GET IT BEFORE YOU TRY
When will jailbreak 11.50 be ready
Start hacking
does the luckfox pico turn off the console like before,, kernal panic...
It still does it sometimes, around 30% of the time.
is there any solution for white light stays on after shut down ??
Yes try some diferent img file preferably older ones i had a same problem you have to touch it twice to power on right?
@@eticetic7262 this problems occurs on some slim models i dont have problem on fat models
@@MagneticC7 I had a same problem on fat beside others on brother in law ps4 Fat 9.00 becouse that o decided to make him another usb its more repayable then this
i am trying to jailbreak my ps4 right now (what a coincidence), can't we use android tvs to jailbreak ps4?
assuming you'll be using termux, you'd probably need root for this, so no
@shib5267 anyways i will buy an ethernet to usb c adapter. I think this is the easiest way to jailbreak a ps4.
👍👍👍👍👍👍👍👍👍👍
What about ps5 virsion 5.50
It's been over a year. Us folk on 8.40 PS5 been waiting and waiting 🗿
Why not upgrade to 9.00?
@yeltsinr381 If I am waiting for a Jailbreak and I am on the lowest firmware that I can possibly be on, why on Gods green earth would I update to a higher firmware ?
@@Stardomplay i read ps4
Can i downgrade a ps4 on 11.00 or anything lower than 11 back to 9.00 ?
This channel has a good tutorial for it - "how to revert the PS4 to a previous firmware". But it depends on a couple of things.
You can downgrade firmware on a PS4 but only if your PS4 has a certain chip type. Some PS4s can't be downgraded currently.
If your PS4 does have the right chip type, you can only downgrade back to the firmware it had before its current one. So if you're on 11.00 and the version you had when you updated to 11.00 was 9.00, then you can go back to 9.00.
But if you updated from say 10.50 to 11.00 then you can only revert it to 10.50 and can't downgrade it any further.
I don't know if there's a way to find your chip type without opening up your PS4. I also honestly don't know if there's a way to tell what the earlier version was before downgrading, apart from guessing based on how often you used your ps4 or had it connected to wifi.
If you downgrade and it brings you to an earlier firmware than 9.00, I believe there are ways to then update your PS4 to 9.00 specifically using a USB stick and a copy of the firmware.
The process for doing the downgrade is pretty complicated. It requires specific bits and bobs that you probably won't have lying around, and you'll need to have good soldering skill.
I hear you can't do a USB jailbreak exploit on 11.00 while you can on 9.00, but imho staying on 11.00 and using picofox to jailbreak your system will be way easier than reverting to 9.00. So long as you don't update your PS4 any further, you can always try that downgrade path later.
To be honest unless there's something about 9.00 that you need to do some kind of modding or homebrew, I don't think it will ever be worth it to downgrade from an 11.00 PS4.
I've been looking into downgrading for a while because I have an 11.02 PS4, and I haven't found any other method to downgrade. I'm gonna wait maybe 6 more months for an 11.02 jailbreak before trying the downgrade myself. I already have soldering equipment and enough experience with soldering, but I'd still rather not have to buy the parts and go through with all the work involved.
in the end it would be cool if you turned it off and on just to see it auto jb
This method did not work on my $5 Aud Luckfox pico mini B, thankfully the old tutorial works fine.
we are waiting for ps5 hacking on more recent versions.
After pppwn, my ipadress goes blank and I can't access the webserver on this version.
Am I missing something?
Same as me, I also can't access
For now I reverted back to older version, this is slower for me and doesn't even give all the function as in the video.
Ps4 slim on 11.00
Check GoldHEN settings menu for "Disable PPPoE Patch and insure it's unchecked"
make a video ps5 8.20 jailbreak
Lucky to get a
5x JB. Give it time
❤
11.50 choking In the ice🥶
PLEASE 12.00 JAILBREAK TO LOWER VERSION OR TO LINUX
🧠👑💪🏿
What about 11.02
If it mentions nothing, there is nothing
noway
He's not engineering inverser 😂
Please 12.00 jailbreak...
Im still waiting to play online just like my ps3
"When the new jailbreak will be ready", these kids be talking like its a pizza order😂
Tutorial to jailbreak ps4 9.00 without usb
oowh...thats why its doesnt work...im using old method
Another opportunity to say : MODDED WARFARE PLEASE GIFT ME A PS5 FOR NO REASON 😂 😂 😂 😂 😂 😂 😂 😂 😂
Hi mate, I wanted to contact you through the comments because you’ve just recently uploaded a video
I’m really struggling with the RGH3 on my Xbox 360 slim
I did the 10k resistor wire and put them in the proper places
The Nan read well and the Zelle wrote well, including the files which was done on Jay Runner
But the problem of having as it won’t boot up, I’m not sure if it’s my wiring or my soldering or it’s a dodgy Jay runner and it’s corrupting what’s going on
Can you please give me some advice or guidance on what to do? This is something I really want to do and it’s really frustrating me.
The first time I did it before
It asked for the CPU key and it said it was wrong and it just caused absolute havoc
I’m in desperate need
Happy New Year
From chappers
Mr. Mario’s videos are amazing and the content I’ve learnt of doing the PS3 was easy, but the RGH three seems to be a lot more difficult.
I don't think he will respond to comments. It would take an awful lot of time to respond further questions.
@@johanferozcoThis video only has 85 comments 🤣
Google
Consolemods
RUclips
Reddit 360hacks wiki
My ps4 version 11.50😢
Ps5/5.50?
ps5 jailbreak 10.20 please update news
Update to 11.00
We on 12.02 nibba
Boring release 11.50
He can't exactly release something that doesn't yet exist to the public
No 11.50😢
HAHAHAH ***GOT
11.50 ?
hi
٢
2025 and nothing new came.... very strange start to new year as usually LOAAADS of stuff is announced or released, so bad Modded Warfare is making the same videos...again....
second
First
LETS GOO NEW JAILBREAK I think 😂 (happy new year ❤🎉)
Nvm it was a stupid new guide
Nothing new for the 11.50
dunno why everyone wants a jailbroken ps4 they r so boring
It’s more just about having the ability do say emulate games or back your own games up, also installing Linux, a jailbroken ps4 is good for people who only have console money but want to play PC games or old games
@@Rajesh-Koothrappali fair nuff
Im playin on ps5 while waiting for 11.52 jailbreak for ps4 :)
where is 11.50 people👾? we need protest march for Jailbreak 🤕😤🤣
stop hate 11.50 people 🥲🌚