Removing the bulkhead retainers in a VW T5/T6 panel van
HTML-код
- Опубликовано: 13 июл 2024
- ITEMS USED IN VIDEO
Trim tool set: bit.ly/2Os024t
Halfords socket set: bit.ly/371qfOe
Bergen Torx socket set: amzn.to/2Qqwapr
Spline tool set: j.mp/38VzgZ6
Link to my merch store (t-shirts, hoodies, etc.) j.mp/GDUBmerch
If you've found my channel helpful you can buy me a coffee via ko-fi.com/gdubtv
VIDEO GEAR USED
Main Camera: Sony A7iii amzn.to/2Viwtny
Tripod: Manfrotto 190 Go amzn.to/2KCjmX6
Microphone: Rode VideoMic Pro+ amzn.to/2vvjGCv
Deadcat: Rode VMP+ j.mp/3589QGZ
GorillaPod: Joby 5K GorillaPod amzn.to/2vPjY6J
B-roll camera: GoPro Hero 7 Black amzn.to/2Vn6prb
Phone/backup camera: Pixel 2 amzn.to/2N4xquS
Editing Computer: Apple iMac 27” 2018
Editing Software: Final Cut Pro X
Experience more GDUBTV via linktr.ee/gdubtv
Please like, share, comment below, subscribe and most of all... enjoy the journey!
For media or collaboration enquiries please email g.watson79@hotmail.co.uk
Music licensed via SoundStripe: app.soundstripe.com/referrals...
**DISCLAIMER**
I am not a professional - If you choose to copy how I install products or items in my van I accept no responsibility for any accidents you may encounter as a result!! 
Авто/Мото
I’m doing this this weekend. Thanks for the video mate. Very helpful. I’m taking the seats and cabin mat out as I’m going to have a good dig out
When I did mine I drilled into the weld then around the weld then used a hammer and chisel and had mine out rather clean in no time, any left weld I used a bigger hammer and flattened, then I painted the bare metal, didn't fancy sparks
Sounds very neat & tidy, thanks for sharing.. will give that a go if I ever do it again! 👊🏼🎥🚐
Just use a spot weld drill bit
I just finished this job, I removed seats too but left drivers base but I was running wiring and fitting a battery. Far easier with seats removed. Have to be careful with the sparks as these can melt into the glass.
Ace, well done 👍🏼🎥🚐
Melt into the glass is correct and paint, plastic etc
Another cracking video Gordon 👌😃
Thanks Russell, really appreciate the encouragement mate 👍🏼🎥🚐
Top man!!! I was wondering how can I get it out? Now I know exactly!!! Thanks for Sharing!!!
No problem 👍
You’ve managed to do this a lot quicker than me! I removed the seats, pushed back the ‘carpet’, pulled up the ply floor, and ended up taking a lot of time to grind down each weld. I avoided making any holes and left it all pretty smooth. Just putting a second coat of metal paint on tonight. I know it’s all covered up… so not sure all the extra effort was worth it! Took me bloody ages. I think I’ll be fitting a double swivel seat and some other bits while it’s all in pieces.
Pls cover your glass 🤦🏼♂️
I’ll be covering my glass when I do it!!
You can buy a spot weld removal drill bit. Then no need for grinder. Might be better option.
For sure, those sparks are scary!!!
Wears the Hat ?
Lol, it will feature again! 🤦🏻♂️👍🏼🎥🚐