Finally you guys are thinking about us FL studio users. Thank you. I ordered yesterday. Would love to see with different colours Limited edition. Will look cool with different theme desk setups
I dont understand, there is not explanation how to get the keyboard to a point where it does this - I can play the keys but there is no control of the DAW - what is the first steps to get that part set up
hello. thank you for review . im just bought it but my fl studio dont play with it . Its see the signal but no any sounds with this . whats can be the problem ?
hi for some reason it just doesnt work . it works under midi setting "generic controller" setting(only the keys, knob and faders still doesnt work) and it completely doesnt work when i chose the midi setting "arturia minilab 3" script
For those who are struggling with the keys not working, Make sure you download all drivers and up to date firm ware to the computer... and to also factory reset if your keys where used like mine. Close out of the install, and properly install the firmware in the midi control center you install while installing all drivers etc.. it will tell you turn the keyboard off and back on, then to click okay. You know you've done it right once the buttons on the left side of the keys start flashing (Chord, Trans, Oct -, Oct +) while its downloading. once its done, go back to your midi options on your DAW and reconnect!!!! whole lotta non sense but it worked for me
When I turn the black knob, nothing happens. FL gives me a green knob with a question mark. I cant flip through instruments as shown in this tutorial? What am I doing wrong? Using the default FL script and latest firmware.
Was looking for an entry level keyboard and compared this to akai mpk mini 3. It was a very close call but FL Studio support for Arturia made the decisive point. Thanks for the content!
dude for some reason (when im on fl studio) i can only use the keys to play kicks/claps/hihats etc. but nothing else works.For example my encoder doesnt change from a kick to a clap or to a hihat. it feels like i havent connected it to fl studio but im pretty sure i did connect it.Does anybody know whats wrong?
I bought miniLab 3 because of the functions the video shows. I loaded FL-Studio Demo, but MiniLab 3 doesn't support that DAW out of the box. What to do?
What’s about mk2 ? Arturia should make FL studio script for mk2 we can’t throw in garbage we have to use mk2 till mk3 available in out county please do work on it make FL studio script for mk2
I am having issues connecting the mini lab 3 to FL Studio. The midi control center is unable to read the firmware version , when tried to upgrade it states "Could not get firmware revision" . unable to find any solution over this across net.
My encoder doesn’t move anything in Fl studio. The minilab 3 works with the sounds but doesn’t switch between sounds like shown in the video? Any suggestions?
i want to know how can i change from pattern 1 to pattern 2? I made my pattern 1 as drums and pattern 2 to be bass, then i want to play pattern 2 and stop pattern 1, How can i do that ? so how to change patterns and how to mute patterns ? as well as how to record for bars ?
put Arturia vst on channel 10 in setting (gear icon) I couldn't find it out either but now it works you will have to put it on channel 10 every time unless you make a template. i think
Hi im having problems with my mini lab 3, I have connected it with FL studio & the keys work and the drum pads are responsive but the faders and the main knob to select things just does not work at all do I have to enable something different for this ? ive been trying for days and still haven't found the solution :(
Hope I don’t have to set midi channel to 10 for every new analog lab instance, would love to be able to set it globally or when the controller is used in fl studio. As otherwise it would be huge workflow annoyance
@Heath-Bounce You don't actually! Open Analog Lab, change the midi channel to 10. Then press the little arrow in the top left and "Save preset as..." and replace the .fst file in your main plugin folder. If you want to change the color of the plugin in the channel rack that saves within the file. Every time you open up Analog Lab from now on the midi channel will be set to 10 and the color of your choice. You're welcome!
@@Marcus19851228hello! What can be wrong if the knobs and faders of minilab3 dont work in analog lab as a vst, but work when analog lab is open separately, not in daw? My channel is set to 10,but it doesn't help. Can it be the problem of the midi scripts attached to instructions? Do I have to use them even if I have the latest version of fl studio? Seems like you know your stuff, I would very much appreciate your help. 🙂
i can not totally control fl studio:( i did everything! upgraded firmware. extracted fl studio scripts. set same midi input and output... in midi settings the are minilab and 3 others in list (which are disabled) But in controller type there is no minilab 3. I also switched to DAW mode. I can play notes and link to controllers.... but Shift+play/stop/rec and main knob are not working in daw. Analog lab works fine. i use 20.9 version of fl studio also, when i press Shift on minilab - knob with question mark blinks in fl studio
In Windows 10 i don't have a flex plugin When I press shift and record - there is a 5 paragraph menu! What should I choose? Ok, choose "everything". Next - we know to start recording, but how we can stop it in a needed place??? Looks like she is knows what to do, but doesn't understand how it works.
Toll.. wegen diesem Video das Midikeyboard gekauft aber es funktionieren nur die tasten, Play und Pause. Der Rest muss anscheinend programmiert werden bzw Scripts geschrieben werden wovon man 0 ahnung hat. Das was man bei Arturia runterladen kann lässt sich nirgendwo installieren. Richtig asozial.
Can't make it work...unless I have the generic controller script on it doens't do anything smh and can't find any help online, I should've bought the older one...
This video was useless as it never got around to explaining how to set this functionality up. In future I would prefer someone more knowledgeable about the product.
А настройку цвета пэдов в стандартных пресетах daw и arturia вы не хотите сделать? Пользовательские пресеты бессмысленны, так как скрипт создан для стандартных пресетов daw и arturia, но только в пользовательских пересетах можно поменять цвет пэдов. Это ужасно! Я не хочу белые или синие. Я хочу свои цвета.
Using knobs on this device is so unproductive! They are endless encoders but they work as absolute knobs. If you enable the takeover function in FL (wich you should), you have to look at that tiny scren to see the absolute value of the encoder so you know in wich direction to turnit to reach the parameter actual value to take control over it and then you can adjust to the desired value. It's so contraintuitive and contraproductive... They updated the firmware and now you can put the encoders in relative mode under user presets but they didn't release a script with relative functions on the encoders for fl studio. I am so sorry that I bought this keyboard driven by the the fact that tere are endless encoders. 😟
Thanks for sharing ;)
Omg it’s fl studio
HI DADDY
are you guys cool with piracy?
@@OhNooJosephJoestar yar
Yo my bad for pirating your app. Gotta do what I gotta do tho 🤷♂️
It's good to see that you guys are keeping FL Studio producers in mind🙇♂
Finally you guys are thinking about us FL studio users. Thank you.
I ordered yesterday.
Would love to see with different colours Limited edition. Will look cool with different theme desk setups
Can i connect the MiniLab when i use FL Studio Free Trial?
I dont understand, there is not explanation how to get the keyboard to a point where it does this - I can play the keys but there is no control of the DAW - what is the first steps to get that part set up
To begin using MiniLab 3 in DAW Control mode, hold Shift and press Pad 3 so that the
display reads “DAW”.
@@KY-zu1wx Replying to boost this comment as much as possible. Thanks a ton :)
@@KY-zu1wx love u broo goat !!
hello. thank you for review . im just bought it but my fl studio dont play with it . Its see the signal but no any sounds with this . whats can be the problem ?
0:16 Not only popular, Its POWERFULLLLL !!!
EXACTLYYYYYYYYYYYY
Thanks for showing FL Studio Love
@arturia any chance that this integration work on other devices, like keylab MKll 61 ?
Can you make same but for mk2 + FL ?
Would be nice to see support for older models too. I have minilab mk2 and have to use some getho 3rd party script to use it with fl studio.
Have the Keylab 66 mkII And would love backwards compatibility. What script are you using?
hi for some reason it just doesnt work .
it works under midi setting "generic controller" setting(only the keys, knob and faders still doesnt work)
and it completely doesnt work when i chose the midi setting "arturia minilab 3" script
Did you end up finding a solution to this problem? I'm dealing with this now
@@wockheart1916 No,how can you fix it?
@@laihanson1958 have you found anything?
@@laihanson1958 You need to use a version of FL studio that is 20.9 or higher
@@CentTeq You need to use a version of FL studio that is 20.9 or higher
my 8 knobs and 4 faders are NOT Linked to my soundshaping tools in analog lab what should i do?
you're going to have to assign them yourself if they aren't already
The FAQ Link about connecting the Keyboard to the DAW is missing
Would be great if this FAQ link was present for those of us that automatic setup didn't work for.
For those who are struggling with the keys not working, Make sure you download all drivers and up to date firm ware to the computer... and to also factory reset if your keys where used like mine. Close out of the install, and properly install the firmware in the midi control center you install while installing all drivers etc.. it will tell you turn the keyboard off and back on, then to click okay. You know you've done it right once the buttons on the left side of the keys start flashing (Chord, Trans, Oct -, Oct +) while its downloading. once its done, go back to your midi options on your DAW and reconnect!!!! whole lotta non sense but it worked for me
Not bad of a demonstration.... I was keeping my eyes on the Macbook the whole time though. Looks like it's hanging over the edge! AHH!
When I turn the black knob, nothing happens. FL gives me a green knob with a question mark. I cant flip through instruments as shown in this tutorial? What am I doing wrong? Using the default FL script and latest firmware.
My minilab display also doesn't show me what track I'm on. Playing keys does work though.
Please show how to connect the main coder in fl studio!
Was looking for an entry level keyboard and compared this to akai mpk mini 3. It was a very close call but FL Studio support for Arturia made the decisive point. Thanks for the content!
dude for some reason (when im on fl studio) i can only use the keys to play kicks/claps/hihats etc. but nothing else works.For example my encoder doesnt change from a kick to a clap or to a hihat. it feels like i havent connected it to fl studio but im pretty sure i did connect it.Does anybody know whats wrong?
Same problem
To begin using MiniLab 3 in DAW Control mode, hold Shift and press Pad 3 so that the
display reads “DAW”.
@@Vovchique To begin using MiniLab 3 in DAW Control mode, hold Shift and press Pad 3 so that the
display reads “DAW”.
@@KY-zu1wx i made that stupid problem too thanks man .
I bought miniLab 3 because of the functions the video shows. I loaded FL-Studio Demo, but MiniLab 3 doesn't support that DAW out of the box. What to do?
What’s about mk2 ? Arturia should make FL studio script for mk2 we can’t throw in garbage we have to use mk2 till mk3 available in out county please do work on it make FL studio script for mk2
it is a script available in fl you just have to look for it in the drop-down that says "general controller" (yes I checked lol)
Arturia’s official script is available for fl studio got it man now i love my mk2 mini 🤗
I am not able to navigate. Some functions are not working like rec, play, stop and repeat. Can you help?
Same
@@Waveninty4same problem
How can we transpose by semitone?
shift+octave down/up
I am having issues connecting the mini lab 3 to FL Studio. The midi control center is unable to read the firmware version , when tried to upgrade it states "Could not get firmware revision" . unable to find any solution over this across net.
My encoder doesn’t move anything in Fl studio. The minilab 3 works with the sounds but doesn’t switch between sounds like shown in the video? Any suggestions?
Same here
Looks awesome and loving the dedicated support for FL Studio! When can I buy this in the UK?
amazon
Hi i have a question, after matching minilab with fl studio keys and pads are working but controlers are not, where is the problem ?
i want to know how can i change from pattern 1 to pattern 2?
I made my pattern 1 as drums and pattern 2 to be bass, then i want to play pattern 2 and stop pattern 1, How can i do that ?
so how to change patterns and how to mute patterns ? as well as how to record for bars ?
Okay so I registered my mini lab but fl studio isn’t reading any signals… is there something else I’m missing ?
The instruments become staticky once I use analog lab plugin ….
I cant seem to get the faders to work with Analog Lab
put Arturia vst on channel 10 in setting (gear icon) I couldn't find it out either but now it works you will have to put it on channel 10 every time unless you make a template. i think
input port midi on channel 10
Hi Team, is it compatible with Android Mobile Fl studio?
Connecting fine but knobs and fader not connected can u help me how can i registration
when is the new gen mini lab 49 and 61 are going to be released?
You would think since the majority of people use fl for beat making they would make it to where you can use the drum pads out side of FPC
Wow very easy tutorials...😢
What i exactly looking for thanks
How to control Analog lab with four faders in FL studio tho?😢
Yeah when I turn my knob it crashes FL. Nice integration.
Same for me, did you find a fix?
It’s not working with script😢
Same here bro. Crashes
What about installing templates?
How does this compare to the flkey 37?
Was wondering about this exact thing! Did you end up getting one of them and if so do you recommend it?
Hi im having problems with my mini lab 3, I have connected it with FL studio & the keys work and the drum pads are responsive but the faders and the main knob to select things just does not work at all do I have to enable something different for this ? ive been trying for days and still haven't found the solution :(
Did you find a solution for this??
only keys and pitch control work for me on fl studio 20.7, minilab fw 1.1.1
Anyone got a fix for this?
fl gang 💯🔥
I gather these tutorials on DAW control only apply to PCs, right? Or can FL Studio Mobile be controlled the same way?
Hope I don’t have to set midi channel to 10 for every new analog lab instance, would love to be able to set it globally or when the controller is used in fl studio. As otherwise it would be huge workflow annoyance
@Heath-Bounce You don't actually! Open Analog Lab, change the midi channel to 10. Then press the little arrow in the top left and "Save preset as..." and replace the .fst file in your main plugin folder. If you want to change the color of the plugin in the channel rack that saves within the file. Every time you open up Analog Lab from now on the midi channel will be set to 10 and the color of your choice. You're welcome!
@@Marcus19851228thank you!!🙌🏽
@@Marcus19851228hello! What can be wrong if the knobs and faders of minilab3 dont work in analog lab as a vst, but work when analog lab is open separately, not in daw? My channel is set to 10,but it doesn't help. Can it be the problem of the midi scripts attached to instructions? Do I have to use them even if I have the latest version of fl studio? Seems like you know your stuff, I would very much appreciate your help. 🙂
i can not totally control fl studio:(
i did everything! upgraded firmware. extracted fl studio scripts. set same midi input and output... in midi settings the are minilab and 3 others in list (which are disabled) But in controller type there is no minilab 3. I also switched to DAW mode.
I can play notes and link to controllers.... but Shift+play/stop/rec and main knob are not working in daw.
Analog lab works fine. i use 20.9 version of fl studio
also, when i press Shift on minilab - knob with question mark blinks in fl studio
Did you end up solving the problem?
@@Turtles8179 yes. now working quite good!
@@ilyavig is it worth getting? can’t really find any info on how well the integration works. Is it every feature or just some?
@@Turtles8179. I like it. Specially built it arp function
@@ilyavig how did u
In Windows 10 i don't have a flex plugin
When I press shift and record - there is a 5 paragraph menu! What should I choose?
Ok, choose "everything". Next - we know to start recording, but how we can stop it in a needed place???
Looks like she is knows what to do, but doesn't understand how it works.
Very cool, thank you✨
Toll.. wegen diesem Video das Midikeyboard gekauft aber es funktionieren nur die tasten, Play und Pause. Der Rest muss anscheinend programmiert werden bzw Scripts geschrieben werden wovon man 0 ahnung hat. Das was man bei Arturia runterladen kann lässt sich nirgendwo installieren. Richtig asozial.
beautiful :-D
Make a video for Logic Pro X please.
Logic Pro video coming tomorrow!
@@ArturiaOfficial cmon man you gotta do it
please help me i cant use it in FL nothing is happening when i use the minilab
same
@@prodbymicrowave did u find out? if not i can help
I buy minilab 3 but my knobs are not working why?
same u got solution
Anyone else that have problems with the pitchbend slider not working properly?
Every time I load FL Studio my Minilab is missing! And have to reload it.
Can't make it work...unless I have the generic controller script on it doens't do anything smh and can't find any help online, I should've bought the older one...
This video was useless as it never got around to explaining how to set this functionality up. In future I would prefer someone more knowledgeable about the product.
Do people still use the channel rack?
yeah maybe just not the step sequencer (which is just a nice to have) but I still use it to add synths etc
@@maartenpsion9036 Why? Easier to add directly to playlist header and get the routing done automatically.
@@fredrik140 Ah yeah ofc! You mean the F8 and drag the synth to the playlist right? I do that indeed.
What? I use the channel rack and step sequencer every time I make a beat in FL and so do many other producers I know.
@@fredrik140 setting up layers needs the channel rack
not working, my Minlab3 not conecting to FL Studio?????????????? please help
Arturia 💯 Minilab 3 💯 FL Studio 💯 Yetundey 😍💯
А настройку цвета пэдов в стандартных пресетах daw и arturia вы не хотите сделать? Пользовательские пресеты бессмысленны, так как скрипт создан для стандартных пресетов daw и arturia, но только в пользовательских пересетах можно поменять цвет пэдов. Это ужасно! Я не хочу белые или синие. Я хочу свои цвета.
mi script not found way?
Arturia always makes the worst videos, but the best software
this sound like my first beats from 2017 lol
Ya instale los controladores pero no me coje igual
BRO, CAN SOMEONE TELL ME, WHY TF MY KNOB JUST DOESNT WORK
Using knobs on this device is so unproductive! They are endless encoders but they work as absolute knobs. If you enable the takeover function in FL (wich you should), you have to look at that tiny scren to see the absolute value of the encoder so you know in wich direction to turnit to reach the parameter actual value to take control over it and then you can adjust to the desired value. It's so contraintuitive and contraproductive... They updated the firmware and now you can put the encoders in relative mode under user presets but they didn't release a script with relative functions on the encoders for fl studio. I am so sorry that I bought this keyboard driven by the the fact that tere are endless encoders. 😟
when i open up a vst plugin , how can i control the cutoff of the sound using a knob on my midi controller?
The faders don’t work
The knobs don’t work
PLEASE CAN SOMEONE TELL ME HOW TO CONNECT THE MAIN CODER TO FL STUDIO!!!😫😫😫😫
Samee 💀 idk how to use main knob with fl studio
what a lovely, lovely smile!
شركة فاشله ومتأخرة كل المميزات اللى بتتكلم عنها دى موجودة فى ميدى كنترول كمبيليت komplet من يجي 7 سنين . دول بيقلدو شركة كمبيليت اللى سابقهم من 7 سنين
It is not working in FL.