Mike Teets my IT-425 starts on 1- kick !! Choke on, rock bike back/forth 2x, set piston at TDC, boom starts on 1 kick !! Then i hold up 1- finger to all my fans watching!!! I use VP-C2 which may help !! And i ride her almost daily!!!
That's absolutely awesome 😈 back in the mid 90s when I was like 5-6 y.o. my dad put an rd250 motor in a blaster chassis and that thing was scary for that time lol my brother and his buddies all ended up hurt by it at some point 😂
Yz .. Always had a bad wrap !! But they loved them in the 90z in my hood especially the 490s wit the big bore kits it’s smoked ATK !! For 5k a race in the early 90s I seen it .. Only Yz! For me !!
That thing must be a blast to ride. Squirrelly as hell with the geometry of the blaster, being very narrow all the way around. Maybe widening it all the around would help, I donno. Reminds me of a Tecate4 a buddy made with a KX500 stuffed into it.
😂😂😂 when you get the carb plumbed right for that top end, ride it like a 125. 38mm carb at the least. The 490 would carry above and beyond the other 500 class. 🚀🚀🚀
I wonder how long the chassis and mounts will last with that engine. The 490 motor in the dirt bike will rattle your soul out of your body,I couldn’t imagine how it rattles in a blaster
The pipe is Restricting so much power is on two strokes the pipe allows gases the bounce back into the motor that’s why they’re shaped all weird like that you fox that and jet it up Itl be nasty nasty then it could mess with a banshee but not the way it is
A cr 500 has more bottom end then a banshee stock for stock but if your talking about a hopped up banshee that's a different story period and yes this is coming from someone that's a 1990 cr 500
@@justincasey_grabbederpussy6756 I own a YZ490- I know how much they vibrate in stock condition. I got my crank microbalanced and now its silky smooth and picked up some top-end revs as well.
Guys never do this because the older 490/500 engines are not counter balanced and it will vibrate ur hands and motor mounts and frame will crack and bolts will fall off every ride even with loctite I done these builds and there horrible!!! U can do a trike 500 build and be fine but don’t do atv because you’re hands and feet will go numb in 5 minutes and it vibrates so much it’s unsafe
Thats why you get the crank microbalanced. My YZ490 is the smoothest bike in my garage now. My 2 CR500s and especially my KX500 are all getting the same treatment when its time to rebuild the cranks.
I hate the way people try starting 2 strokes...if you kick it over slow and prime the cylinder they will start so much easier
Thank you
Mike Teets my IT-425 starts on 1- kick !! Choke on, rock bike back/forth 2x, set piston at TDC, boom starts on 1 kick !! Then i hold up 1- finger to all my fans watching!!! I use VP-C2 which may help !! And i ride her almost daily!!!
Fuk yeah
As long as it has good strong spark, getting it to TDC first, it will start first kick.
It would be great to see a build like this documented showing the fabrication of brackets and install
That's absolutely awesome 😈 back in the mid 90s when I was like 5-6 y.o. my dad put an rd250 motor in a blaster chassis and that thing was scary for that time lol my brother and his buddies all ended up hurt by it at some point 😂
He's just tearing the shit outta the yard!! Awesome fella's!
I have always wanted to build a 490 blaster!!!!!
Still got the blaster 490? If so I'm interested in buying it
Yz .. Always had a bad wrap !! But they loved them in the 90z in my hood especially the 490s wit the big bore kits it’s smoked ATK !! For 5k a race in the early 90s I seen it .. Only Yz! For me !!
That thing must be a blast to ride. Squirrelly as hell with the geometry of the blaster, being very narrow all the way around. Maybe widening it all the around would help, I donno. Reminds me of a Tecate4 a buddy made with a KX500 stuffed into it.
I've seen a 250 blaster,but this is over the top..nice work man..
I have a warrior with no engine and I just found a 490 . Guess what ima doooo
Hey so what's it gonna take for you to do this to my blaster
@ Angio Sylvester .. Do you still build these Beast if a Yz hybrid blaster ?
😂😂😂 when you get the carb plumbed right for that top end, ride it like a 125. 38mm carb at the least. The 490 would carry above and beyond the other 500 class. 🚀🚀🚀
What oil ratio you run on yz490
I Love your Franken 490 Blaster♡
Wheel spacers and +7 inch swing arm and it would be a monster
Lug .. 50+hp . No rev . Cool
id totally buy this if yall were still selling it
I wonder how long the chassis and mounts will last with that engine. The 490 motor in the dirt bike will rattle your soul out of your body,I couldn’t imagine how it rattles in a blaster
Looks stock, awsome job
So badass!!!
Need a new camera man try to get what your filming in the centre of screen not to hard to do the machine is awsome great job
The pipe is Restricting so much power is on two strokes the pipe allows gases the bounce back into the motor that’s why they’re shaped all weird like that you fox that and jet it up Itl be nasty nasty then it could mess with a banshee but not the way it is
Absolutely amazing I gotta blaster if ya wanna show me what's up lol
How hard to put that Motor in it, I want to build one
Got i hope that gear was upped or u will be replacing something soon think about the fact I can from two wheels to four thts why its hooking like tht
The yz 490 is no joke i have an 87 arm pump galore
Nice it looks like a blaster motor cause the fins lol
Where can I get in touch with you ?
Im smelling 2 stroke ;)
I am possibly interested.......
How much and how to get a hold of you
87yz 250r t shorter kick lever would been nice but that’s bad ass
I own this quad now and have a video of it on my channel, it will be up for sale soon.
WoW.......... very cool........
Do you still have bikes
Sounds like my leaf blower
How much you’ll charge to do this to mine?
You are a mad man.
It does not have more bottom than a banshee
a yz490 does indeed have more bottom than a banshee like by a long shot. have you ever ridden any of the two?
It just doesn't sound like a banshee cos a shee is a twin and screems
power tools reviews twin MX with cooled heads and bottom end
A cr 500 has more bottom end then a banshee stock for stock but if your talking about a hopped up banshee that's a different story period and yes this is coming from someone that's a 1990 cr 500
Lol he lookin back to see his roost 🤣 how old is he lmao
That is so frickin cool
That filter is a joke, needs custom air case.
I hope you balanced that crank, or else you are going to become *very* familiar with your welder.
Dr. Hugo G. Hackenbush sooooooo wrong. Keeep hatin!
@@justincasey_grabbederpussy6756 I own a YZ490- I know how much they vibrate in stock condition. I got my crank microbalanced and now its silky smooth and picked up some top-end revs as well.
A banshee is way faster stock🤣 sounds like it's not hitting full power but still cool
Amazing
I have a quad and I want a engine swap I'm in NEPA can you do. The swap for me
Call 717 9916732
Its a monster their so hard to start I know all about it...😳
Major piston slap
No i’m pretty sure it’s just the way the motor sounds. I have an IT200N and it sounds the same with no piston slap
Where are you located
This Quad Shreds
35mm carb way to small for a 490.. they came with 40mm mikuni....
How did you run your exhaust.
Justin Folsom. He made it from two pipes
Justin Folsom glad I wasn’t the only one.
How much
Find me a yz490 motor I'll install it in a blaster frame
I need one..
Guys never do this because the older 490/500 engines are not counter balanced and it will vibrate ur hands and motor mounts and frame will crack and bolts will fall off every ride even with loctite I done these builds and there horrible!!! U can do a trike 500 build and be fine but don’t do atv because you’re hands and feet will go numb in 5 minutes and it vibrates so much it’s unsafe
Thats why you get the crank microbalanced. My YZ490 is the smoothest bike in my garage now. My 2 CR500s and especially my KX500 are all getting the same treatment when its time to rebuild the cranks.
@@dr.hugog.hackenbush9443 can you share some info on this ? I’m doing a similar swap
not even close to the bottom end of a banshee..
That thing is an animal
How much are you selling it for?
How much send me an email I can message you on
Better off with a 465 motor
Carb wants changing
Bogging out badly
thats gonna make u shit ur shorts!!! huge skid marks!!
Much hp as a cr500
Love it
Get sm
@@randysylvester2203 how hard was it to build, like motor mount wise
Seems like its 🗑
Only has like 55 hp
:) lol only
It's wack !!!! All stock wheel base, suspension build a real bike spend some money on that garbage 🗑.