Very honest review, the C6 has built in GPS,that was one of the points to choose the C6pro, I have used it for a while now and the price is advantageous!
This looks quite a good piece of kit. I’m always wary of tyre pressure sensors like this. We have two methods of keeping the air in the tyre. The valve cap is the primary seal and the valve is the secondary seal. Anything that holds the valve open reduces the contingency for keeping the air in the tyre. If this is as good as it looks and is not junk manufactured, the Garmin XT looks vulnerable. Thanks for the video, I’ll take a closer look. Thank you.
I think if you had a 6mm (roughly) steel plate made up and powder coated you could probably create an adapter to use on either with various hole patterns so you could use a RAM mount and direct mounting
Hi, fitted the C6 pro last weekend. Great for the commute into Manchester. One question, with the camera install, are they front/rear specific. With the rear if I set rear lens mirror to off everything is reversed. A few thoughts. The tyre pressure warning should have separate settings for each tyre. The GPS speed is hard set to Kms Maybe a way for updating firmware A screen protector would be nice.
The camera modules themselves don’t seem to be front rear specific but I had the rear mirroring enabled and the image looked fine to me. I agree with your comments though, I’m hoping there will be firmware updates fr it in the future probably updated by putting the file on the SD card etc
Very honest review, the C6 has built in GPS,that was one of the points to choose the C6pro, I have used it for a while now and the price is advantageous!
This looks quite a good piece of kit. I’m always wary of tyre pressure sensors like this. We have two methods of keeping the air in the tyre. The valve cap is the primary seal and the valve is the secondary seal. Anything that holds the valve open reduces the contingency for keeping the air in the tyre. If this is as good as it looks and is not junk manufactured, the Garmin XT looks vulnerable. Thanks for the video, I’ll take a closer look. Thank you.
No problem! And I agree, you’d want to be sure that long term the TPMS caps don’t leak air etc
great video, I'm looking to mount one on my Monster using a RAM mount so would prefer the C6. Thank you for explaining the differences
I have seen on another video, where someone adapted the C9 bracket to take a ball mount
I think if you had a 6mm (roughly) steel plate made up and powder coated you could probably create an adapter to use on either with various hole patterns so you could use a RAM mount and direct mounting
Hi, fitted the C6 pro last weekend. Great for the commute into Manchester. One question, with the camera install, are they front/rear specific. With the rear if I set rear lens mirror to off everything is reversed.
A few thoughts.
The tyre pressure warning should have separate settings for each tyre.
The GPS speed is hard set to Kms
Maybe a way for updating firmware
A screen protector would be nice.
The camera modules themselves don’t seem to be front rear specific but I had the rear mirroring enabled and the image looked fine to me. I agree with your comments though, I’m hoping there will be firmware updates fr it in the future probably updated by putting the file on the SD card etc
Hi, good review, mounting question - can the RAM ball be removed from the mounting plate?
It can but only destructively unfortunately
Are your gloves touchscreen compatible?
I think my summer ones are but I used my winter Goretex leather ones later in the day and they also worked fine