RLL is the only Load in the roof... Even if it is roofdeck or truss... RLL means Roof live load... There is no LIVELOAD in roof.... And EarthQuake load is not applicanle to Slab or Truss.. Its only for beam and column
good roof sheets , purlings & truss dead load & wind load calculations but purling weight should not be multiplied by plan area since purling have spacing & do not completely cover the plan area # space area between purling should be excluded # 🇵🇰
What do you call the name of Roof Design which is rectangular and sloped to the other end. Eg: I have a plot of 16x40 ft. 16-width and 40 length. I am planning to have the house facing on the 16 ft wide side as for on both the sides there are two houses. Therefore I have to build a rectangular house with high elevation in the front face (for loft bedroom) and normal height at the back end. I would like to know what would you call this type of roof design. It will be made of Steel Sheets/ Galvanized Steel Sheets.
spacing of truss shouldn't be 3.5 if the numbers of trusses in your figure as shown in 4 so total 3 spacing will make the c/c distance between the trusses as 10 mtr, not 3.5 mtr
Sir, Please provide design of roofing member calculations and calculations of gantry girder for design of industrial shed for subject(SDD-I STRUCTURAL DESIGN AND DRAWING-I)
I found it very helpful thank you for sharing it with us.
The topic was on "How to calculate Dead Load, Live Load and Earthquake Load" but you discussed only on "How to calculate the Dead Load"
RLL is the only Load in the roof... Even if it is roofdeck or truss...
RLL means Roof live load... There is no LIVELOAD in roof.... And EarthQuake load is not applicanle to Slab or Truss.. Its only for beam and column
Thank you so much sir😇😇
I solved same example with different values with help of your video.
thanks lot.
Definitely Like Your Video Sir, Why Not. Thank you for this tutorial. It is very very useful.
Your videos are helpful . Keep it up
Very Nicely Explained Sir❤
thanks sir
Hi, please advice which software is good for design of steel and timber roof truss.
Nice and excellent information video brother thank you for this video brother
Welcome
THANK U VERY MUCH SIR.....GOD BLESS U SIR.....BLESSINGS FROM INDIA GUJARAT.......🙏🙏🙏🙏🙏
why load on slope can be added together with the load on the plan. Does we have to convert it first?
Thank you so much
Very easy
Really great you ...
Very good method to teach me
Bhut achha sir
If the stlop is more than 3, what will be the formula? Pls🙏🙏🙏🙏
Thank you!
Nice 😍😍😍.
Thank you
Sir in this figure how we calculate iron items as purlin and truss,then its analysis of rate. Its total cost is
Excellent
Thank you Sir 🙏
Excellent 👍👍👍
Good
Thanks sir forthe information.
Thanks sir
Hey, you have not calculated the live as well as wind load as asked in question 👆
good roof sheets , purlings & truss dead load & wind load calculations but purling weight should not be multiplied by plan area since purling have spacing & do not completely cover the plan area # space area between purling should be excluded # 🇵🇰
Is this king post or queen post
thank u sir
sir need to clear the concept of half area
Can u explain without half area calculated..I mean a basic shed
Nice question
Sir can you please explain this question:- Describe dead load, live loads and wind loads on a mill bent frame
sir may i get the detail cost estimation for the above?
Sir please explain in kg/mt sq thank you for this video sir
brother upload the next part as early as possible
See my starting video there is full solve example
@@Civiconcepts there is no video for design
@@Civiconcepts don't try to make fool students by uploading 1 video in three part.
What do you call the name of Roof Design which is rectangular and sloped to the other end.
Eg: I have a plot of 16x40 ft. 16-width and 40 length. I am planning to have the house facing on the 16 ft wide side as for on both the sides there are two houses.
Therefore I have to build a rectangular house with high elevation in the front face (for loft bedroom) and normal height at the back end. I would like to know what would you call this type of roof design. It will be made of Steel Sheets/ Galvanized Steel Sheets.
Can you cut block between two rafters? For RCC slab of roof?
please upload a complete design with components of wooden truss.
Sir, how to determine the sizes of truss frame material..ty
bro you have calculated only for half area
and in question they have asked about wind load also
Pitch of a truss ...how to find by the formula?
Please tell me how many metirial need for 50into40feet area
Sir,
How find following component angel / channel selection
1) main tie = ?
2)principal rafter = ?
3)sag tie = ?
16:28 why self weight of roof truss is multiplied with plan area and not slope area.
Can anyone explain this part?
spacing of truss shouldn't be 3.5 if the numbers of trusses in your figure as shown in 4 so total 3 spacing will make the c/c distance between the trusses as 10 mtr, not 3.5 mtr
Sir plz share moy video on this topic
what is the rest calculations
thank you sir hindi me vedio bhi banaye plz....
Pls give me details of 75*65 size ac sheet shead . Low cost Tress design
Sir, Please provide design of roofing member calculations and calculations of gantry girder for design of industrial shed for subject(SDD-I STRUCTURAL DESIGN AND DRAWING-I)
Sir how to calculate the length of vertical Ms Angles and totol structural members for truss like purlin, Gusset plate Angles and I section etc.
How to get Formula Weight of Roof Truss?
What about the wind load calculation
Thank you so much. :)
How to select the size of the steel truss
PLEASE WHAT IS THE WIEGHT OF WIND BRANCING IN BS6399
Ft ka formula nhi lgega ism
Sir ab wind load kese karte......uspe video banayega please
why you use the area instead of slope area for the purlins ?
What is the actual name of the side wall which is made by the same material as roof
Hi i want A models truss (size=82feet LenthX42feet widthX 15feet height.) 8feet brick works materials details
Can you help me with my design?
PLZ Share me this roof calculation
n what about.. live load and wind load???
ruclips.net/video/AKMtLxWUy1M/видео.html
How to calculate the size of pipe.
1.75 = one point seven five . It's not one point seventy five . 😅
Correct 💯
Hi..I need purlin design model problem...
Jab sab assume hi karna hai toh assume kar lo ki truss ban gaya aur burj wale seth ji ki factory dhada dhad chal padi
80 fit span
Where is wind calculation and live load
Live load, And wind load content missing
Pls help me with pdf
live load calculation is not there
Asbestos roofing? Go India!
Yarr tum log please hindi me bola kro yarr
Hindi me video kab banaye ge
ruclips.net/video/AKMtLxWUy1M/видео.html
Live load ,Wind Load is not there!😶
Not clear at all😮😮, the designer seems lost and not even aware of how the design parameters have been worked out
There is no wind load calculation
Thank you sir ❤️
Sir, please guide me , what should be the minimum height of the rise , if half span length is 40 feet.
Ft ka formula nhi lgega ism
Thank you Sir