Adam really really enjoyed watching this one! The cleaning is always so nice to see on these workhorses and so glad it is still original patina all over!!❤
I'm a woodturner I buy used machinery because of cost and quality then spend silly amounts of time cleaning and thinking :-) Oh wow that's a labour of love. I really appreciate you sharing this with us.
Can’t wait to see a gearbox maintenance video. The last time you did one I was fascinated by the gears and the amount of oil needed. This machine is going to become better and better as you go. I appreciate the watching you clean things up at the beginning. Honestly you can lower the music volume. Hearing the sounds of cleaning and stuff is great. Keep up the awesome work, Adam! 🤘🏻
Adam I have a pacemaker about twice as long as yours in our tool room at work. Our production lathe’s the tool post is about 400lbs I am one of the few who takes the time to clean like you are doing. Pride in our profession comes standard for some.
Even if not a complete teardown and rebuild, it will be great to see you breathe new life into another great old machine. The new shop filled up quite quickly, congratulations!
She's alive ! I agree, bearings, shims/bushings and maybe some gears are worn. I heard some added noise when the gears were working on coast so could be the bearings or shafts are beyond reasonable. I think if there is going to be a long life in the ABOM79 shop, I'd plan on replacing most of the higher wear items under the hood. That is a nice and smooth slide for sure.
Adam its funny that I have worked on this old machinery for the better part of 32 years and now im running a cnc lathe in a small shop here in Akron,Oh. At any rate just wanted to say to check your input shaft to the gear box experience has taught me that most of the noise causing damage is in the input but only you can best tell with your ear and a piece of half inch conduit just probing around. best of luck
Just finished Christmas Eve festivities, cleaned up the house and wrapped the last of the presents. Now I get to sit by the fire and watch some Abom79 and listen to the relaxing music. Merry Christmas!
I've had time to consider this issue further having consumed and digested a rather large portion of turkey!!...😆😆👊 I don't believe the run out on that three jaw is issue with the chuck. I believe it is the main bearing on the chuck side of the gearbox. When you critiqued the chuck, splines feel good during nip up, that would suggest chuck in good order, looks like done little work. It would suggest the bearing is the culprit considering that noise. Food for thought!! Seasons Greetings from Ireland!!
Watching you lovingly pour work into these old machines is a beautiful thing. I can tell that you want to give full justice to the craftsmen that built it and worked on it all those years ago. I can't help but believe that they are smiling down on you from Heaven. Merry Christmas and thank you for all the great videos.
I am suspicious that clatter is coming from a reverse bell mouth condition on that chuck making it knock while in the cut. putting that 4 jaw on may make it sound a lot better. Alternatively could use your tool post grinder to straighten em out and see if it fixes your runout. My 3 jaw never gives me any trouble unless it’s on something thin wall. Solid you just crank it down and it will take whatever cut you want to try.
@@bcbloc02 I understand what you mean, just never heard ''reverse bell mouth''. I always thought chuck jaws bell mouth at the front, and this is the condition they flex into when tightened. Didn't realize reverse bell mouth is a thing? Unless someone ground it that way?
Sweet! I can imagine the lathe changed the world as society entered the industrial age - it would be fascinating to read a book on the history of the lathe.
Adam, There is a Sherwin Williams color, Urbane Bronze SW7048, that is a good match to the older dark gray colors on machines of that vintage. You can get it in the enamel in small cans. It would go well on those parts of the lathe you have cleaned. Thanks for everything you do, Merry Christmas.
December 24, 2122 AD: Discovered beneath the ruins of Old Pensacola Florida an intact early 21st-century machine shop. The shop contains a mixture of mid 20th-century and early 21st-century equipment. All equipment is in immaculate condition. Except for a thick coating of dust, much of the 21st-century equipment appears as new, as if it was installed new and never was used. It cannot be emphasized how important this find is. It is rare to discover such a complete workshop showing the transition from manual to computerized creation of components. While today such parts creation would be accomplished via AI and 3D printing, it is educational to find a complete transitional machine shop in such museum quality condition. It remains a mystery as to why this equipment was never used. Records from this period indicate that this was an immensely expensive assemblage of equipment. A further mystery is the glyph of Abom79 affixed to every smooth surface. Researchers are attempting to ascertain if this has some sort of hidden meaning, or is graffiti left behind by an urban explorer in the intervening years, we may never know. The Old Pensacola Preservation Society thanks the City of New Pensacola county council for it's help preserving this once in a lifetime find for future generations. It is unlikely that a virtually untouched discovery such as this will ever be found again.
Adam, if you still have that 3D printer, you might consider printing bolt hole guard inserts to keep them from filling up with gunk. It looked like a lot of hard work getting that machine so clean. Cheers and Happy Holidays!
What a milestone to make some chips with your own Pacemaker! Great job! I was a precision machinist many years ago and it is nice to see the classic machines kept in service. 80 millionths surface quality with a 10 millionths ID tolerance was the best I ever achieved with a Kummer ("Double chucker"), Sunnen air gauges, and a nice finishing lathe. Abom, thank you for the great content:) Cheers, Jeff (Garage Maker Guy)
What a nice relaxing video , my complements regarding your music choise ☆☆☆☆☆ Realy love the old western banjo music, as an european guy 😅 Secretly having the Anerican Dream myself .. Starting to hate the west Europeanen way of life 😢 , getting to hectic ..to much taxes and no freedom... Grtz from the netherlands Johny geerts
Ran an American 20 x 76 "Style D" for 14 years before they shut our mill down. Great lathe, made a lot of pump shafts, agitator shafts, bore couplings and resleeve bearings in that lathe. The feed would occasionally give me an issue when trying to run heavy feed to break the chip on 316SS. Other than that it was a great machine. 4 jaw chuck of course gives more options to hold irregular work pieces also. Good luck with your project.
Hey Adam I know you gotta keep moving, changing things up and learning new stuff- namely cnc machining ( a completely new and very frustrating discipline all by it’s self ). But hands down this is by far your best work.. old school machinery are things of beauty.. I appreciate the precision of modern tech, but how much more rewarding is sneaking up on a dimension with a set of callipers and a mic’ , plus if you overshoot it’s your own fault rather than a glitch in the machine…😁❤️💪🏻💪🏻💪🏻
I ran a pacemaker at my first job. Normal rughing was one revolution of the hand wheel about .020 feed without strain cutting 4140. The lathe was army surplus off a Navy ship and had a load meter that we thought was broken till I accidentally pushed it with a much harder feed.
We have a lathe like that at work except its a duplicating lathe. It has a hydraulic compound that follows a sample shaft that is mounted back behind the machine. I used to turn 8" dia x 36" 4140 shafts for overhead cranes. I would take .750" cuts at .030 feed.
We measure liquid degreaser usage in units called "Obrochtas." So the proper amount to use per job is roughly 1 Obrochta of degreaser/solvent. This unit is primarily intended for use with brake cleaner solvent. Particularly nasty jobs may require 3-5 Obrochta of cleaner. On the other hand, sometimes you only need 500 milliObrochta of brake cleaner if you just have to give it a light little "how ya doin' mama" to make sure everything's nice and clean. 😎 Adam is using 1 or maybe 1.5 Obrochta of degreaser here so that's an appropriate amount. Pretend like you're the Old God and the dirt is everyone who couldn't get on the Ark.
Regarding your chuck, Robin Renzetti's latest video addresses self centering chuck clamping and runout problems. I'm convinced if you clean up this chuck and follow his process that this chuck will serve you very well with minimal runout.
Merry Christmas Adam and Abby. Thanks for another great year of content. Something very satisfying about cleaning up an old machine, seeing the scars, and wondering what tales it would tell if only it could talk. That Pacemaker is a beautiful machine. Love the old Art-Deco styling. That tool holder has similar design elements and goes perfectly on that machine.
Suggestion, if you read this ... on the compound, make yourself a plug for the second unused tool post mounting hole. No sense packingnit with chips until the day you need it! Great to see the Pacemaker up and running! Thanks for sharing 🇨🇦
Merry Christmas to you, Abby, and your whole family, Adam. Thanks for the education and entertainment you give us, and I hope you have a fantastic 2023!
Can't wait to see what's causing that noise as that's when things are going to be a true learning experience as we've already heard the noise so now time to see what's causing it. This way we all will learn from this as we get to see and inspect those guts along with you. Take care and enjoy this beauty.
Magnifique remise en servis d'une machine qui peut encore réaliser d'inestimables travaux. Bravo pour votre savoir faire et la pédagogie de vos vidéos. Benny Rooman à Bruxelles.
Glad to see this lathe up and running again! I would not recommend using it too much before checking the head stock gears and bearings though; even from the video I can hear that something is very worn in there as you mentioned.
I have 3 pacemakers and I consider them lighter duty compared to American Type C’s I have but they are reliable and easy to work on and they get the job done and hold perfect tolerances I recently had that brass nut that rides on screw for cross slide break in two pieces so I have a parts machine and used it to fix my lathe and I did it while running my other job and took me two days to break down clean and replace and it faces really nice now and isn’t leaving a mark in center
Feliz navidad amigo a pesar de tener esas máquinas CNC no abandonas los tornos fresadoras lo de la vieja escuela 🙏👍Dios te bendiga ATI y tu familia amigo
Merry Christmas too you and your loved ones .thanks for sharing and creating all the wonderful vlogs for us during these trying times.wish you the best in the new years
Great to see a little TLC on the good old iron and making some chips in the miss of all the other projects you have going on keep up the good works!, y’all have a great Holiday!
Thank you Adam for the great video content you create for us viewers. Merry Christmas to you & Abby & all the subscribers, all the very best in 2023 Cheers and Blessings. 🙏❤.
That pacemaker is nice! I've also got a headstock noise and cross slide feed issue going on with my Cincinnati Hydrashift. I think the noise is pump related because it doesnt always shift gears. They feed issue I'm thinking is related to the "quick reverse" on the cross slide. Lots to learn!
Nice old machine, I'm afraid it needs even more attention and care. That sound is clearly a sound of a worn out gearbox. That gearbox needs an overhaul. Replacement of all bearings. not surprising after 80 years
Congratulations Adam! I’m always impressed and entertained by your work. Attention to detail to say the least. You make me miss being a Machinist and running a Lathe!!!
Good to see that big boy making chips again. Assuming the internal scroll on the three jaw is in decent shape all it needs is careful grinding to true them up. If properly stressed with an outer blocking ring the jaws should clean up to .003/.005 total runout.
Your American pacemaker’s finally done and dusted, Looking forward to see some serious chips happening. Merry Christmas and Happy New Year to you and your family. Cheers 🎉
May need bearings. Some of the 3 jaw chucks are adjustable from the backside of the chuck. I think I would indicate the od of the 3 jaw chuck to just see if the run out is .012 also.
Merry Christmas Adam…thanks for all the awesome content you have shared this year.. Hope you and Abby have a fantastic day doing whatever makes you happy
This has been a long time coming! This is awesome! I've been following since about 2014 and remember you talking about a big Pacemaker back when you were at Motion, and here we are! I bet it feels nice pulling the first chips.
Awesome machine ABOM!! At a part time job I have in Boston I run a 30" American from WW2. Mostly 4 jaw and lots of face plate work. I love that machine. Enough iron to build 20+ Toyotas from..... Also a 16" Monarch that is almost as old, no sheet metal on either machine!!
These machines are what helped win WW11 I have Monarch from 1939 and it still holds perfect tolerance and I only paid 1000 US for it and a Lansig with clutch worn out for forward spindle for 250 USD and reversed phase wires and turned reverse into foward and ran it for 5 year like that then sold it for 500 6 years later cause I had a Chuck and quick change tool post I put on it and the guy was able to put a 220 single phase 10 hp Dayton on it and uses it as a hobby lathe tail stock and steady rest included
I keep a 10" wrench plier in my back pocket and its replaced every wrench I use that doesn't require more than a 10" handle's worth of leverage. Works great for grabbing hot material when bench/belt grinding, parting, bending sheet metal, or wiggling keys out of a tight keyway. Its not as fitting to this machine as an older style of wrench, but I can put enough beans into it for any compound nuts on any lathe.
Strong lathe not convenient but useful for every machine shop. This is my opinion. Merry Christmas from sunshine Greece. John Grizopoulos retired machinist
Merry Christmas to the Booth family. God bless & good will. Beautify old piece of history that just needs a little Adam love! May the new year find you well.
Adam really really enjoyed watching this one! The cleaning is always so nice to see on these workhorses and so glad it is still original patina all over!!❤
I'm a woodturner I buy used machinery because of cost and quality then spend silly amounts of time cleaning and thinking :-)
Oh wow that's a labour of love. I really appreciate you sharing this with us.
Can’t wait to see a gearbox maintenance video. The last time you did one I was fascinated by the gears and the amount of oil needed. This machine is going to become better and better as you go. I appreciate the watching you clean things up at the beginning. Honestly you can lower the music volume. Hearing the sounds of cleaning and stuff is great. Keep up the awesome work, Adam! 🤘🏻
Adam I have a pacemaker about twice as long as yours in our tool room at work. Our production lathe’s the tool post is about 400lbs I am one of the few who takes the time to clean like you are doing. Pride in our profession comes standard for some.
Even if not a complete teardown and rebuild, it will be great to see you breathe new life into another great old machine. The new shop filled up quite quickly, congratulations!
She's alive ! I agree, bearings, shims/bushings and maybe some gears are worn. I heard some added noise when the gears were working on coast so could be the bearings or shafts are beyond reasonable. I think if there is going to be a long life in the ABOM79 shop, I'd plan on replacing most of the higher wear items under the hood.
That is a nice and smooth slide for sure.
I really like the look of this lathe. Hope you can make some vids of the gearbox investigation!!😮
Adam its funny that I have worked on this old machinery for the better part of 32 years and now im running a cnc lathe in a small shop here in Akron,Oh.
At any rate just wanted to say to check your input shaft to the gear box experience has taught me that most of the noise causing damage is in the input but only
you can best tell with your ear and a piece of half inch conduit just probing around. best of luck
Cant wait to get a look inside the gearbox of the A.P.
Just finished Christmas Eve festivities, cleaned up the house and wrapped the last of the presents. Now I get to sit by the fire and watch some Abom79 and listen to the relaxing music. Merry Christmas!
I love seeing professionals do a job properly
Love your American Pacemaker, such a wonderful machine. I'm confident that you will sort the gearbox noise out.
If it was Fenner, I would share your optimism.
I’m not a machinist but I find watching your channel very cathartic to watch. Keep on keeping on!
I've had time to consider this issue further having consumed and digested a rather large portion of turkey!!...😆😆👊
I don't believe the run out on that three jaw is issue with the chuck. I believe it is the main bearing on the chuck side of the gearbox. When you critiqued the chuck, splines feel good during nip up, that would suggest chuck in good order, looks like done little work. It would suggest the bearing is the culprit considering that noise. Food for thought!!
Seasons Greetings from Ireland!!
Yay just what I was looking for... Merry Christmas Adam and Abby and a Merry Christmas to all
Watching you lovingly pour work into these old machines is a beautiful thing. I can tell that you want to give full justice to the craftsmen that built it and worked on it all those years ago. I can't help but believe that they are smiling down on you from Heaven. Merry Christmas and thank you for all the great videos.
Kind words. And true. Merry Christmas.
@Kevin Hornbuckle Thank you, and Merry Christmas to you as well.
I am suspicious that clatter is coming from a reverse bell mouth condition on that chuck making it knock while in the cut. putting that 4 jaw on may make it sound a lot better. Alternatively could use your tool post grinder to straighten em out and see if it fixes your runout. My 3 jaw never gives me any trouble unless it’s on something thin wall. Solid you just crank it down and it will take whatever cut you want to try.
Reverse bell mouth? So bigger at the back?
@@Orgakoyd yes that would let it hold the part but when you start pushing on it it will shove it to each jaw as it goes by making a rythmic knock
@@bcbloc02 I understand what you mean, just never heard ''reverse bell mouth''. I always thought chuck jaws bell mouth at the front, and this is the condition they flex into when tightened. Didn't realize reverse bell mouth is a thing? Unless someone ground it that way?
Sweet! I can imagine the lathe changed the world as society entered the industrial age - it would be fascinating to read a book on the history of the lathe.
Adam,
There is a Sherwin Williams color, Urbane Bronze SW7048, that is a good match to the older dark gray colors on machines of that vintage. You can get it in the enamel in small cans. It would go well on those parts of the lathe you have cleaned.
Thanks for everything you do, Merry Christmas.
Beautiful seeing it move some metal! Well done 👍👍
December 24, 2122 AD: Discovered beneath the ruins of Old Pensacola Florida an intact early 21st-century machine shop. The shop contains a mixture of mid 20th-century and early 21st-century equipment. All equipment is in immaculate condition. Except for a thick coating of dust, much of the 21st-century equipment appears as new, as if it was installed new and never was used.
It cannot be emphasized how important this find is. It is rare to discover such a complete workshop showing the transition from manual to computerized creation of components. While today such parts creation would be accomplished via AI and 3D printing, it is educational to find a complete transitional machine shop in such museum quality condition.
It remains a mystery as to why this equipment was never used. Records from this period indicate that this was an immensely expensive assemblage of equipment. A further mystery is the glyph of Abom79 affixed to every smooth surface. Researchers are attempting to ascertain if this has some sort of hidden meaning, or is graffiti left behind by an urban explorer in the intervening years, we may never know.
The Old Pensacola Preservation Society thanks the City of New Pensacola county council for it's help preserving this once in a lifetime find for future generations. It is unlikely that a virtually untouched discovery such as this will ever be found again.
Headcanon accepted.
🤣🤣🤣🤣🤣🤣🤣
As usual the archaeologists concluded it was a tomb and temple to worship the gods. And the structure was made using copper chisels
Adam, if you still have that 3D printer, you might consider printing bolt hole guard inserts to keep them from filling up with gunk. It looked like a lot of hard work getting that machine so clean. Cheers and Happy Holidays!
Could you fill them with silicone.? The silicone would pop out easy when needed to loosen screws. 😃
I know this is a special video for you, I did not expect it to be a christmas presant four us, your viewers. Thanks.
What a milestone to make some chips with your own Pacemaker! Great job! I was a precision machinist many years ago and it is nice to see the classic machines kept in service. 80 millionths surface quality with a 10 millionths ID tolerance was the best I ever achieved with a Kummer ("Double chucker"), Sunnen air gauges, and a nice finishing lathe. Abom, thank you for the great content:)
Cheers,
Jeff (Garage Maker Guy)
So glad that you are back on the Pace. Hoping we won't go months before we see more. Thanks very much for sharing.
What a nice relaxing video , my complements regarding your music choise ☆☆☆☆☆
Realy love the old western banjo music, as an european guy 😅
Secretly having the Anerican Dream myself ..
Starting to hate the west Europeanen way of life 😢 , getting to hectic ..to much taxes and no freedom...
Grtz from the netherlands Johny geerts
Almost like he planned to have his new lathe be his Christmas present! Merry Christmas and Happy New Year everyone!
Great to see an old machine brought back to its original potential and see someone who knows how to appreciate it
Nice work. Those big cuts with a nice finish. Looks like hours of fun ahead.
Oh hey, tell Abby her Chiefs won.🎉
Back to the basics of where we started, I like it. Can’t wait to see what comes off it.
Ran an American 20 x 76 "Style D" for 14 years before they shut our mill down. Great lathe, made a lot of pump shafts, agitator shafts, bore couplings and resleeve bearings in that lathe. The feed would occasionally give me an issue when trying to run heavy feed to break the chip on 316SS. Other than that it was a great machine. 4 jaw chuck of course gives more options to hold irregular work pieces also. Good luck with your project.
Hey Adam I know you gotta keep moving, changing things up and learning new stuff- namely cnc machining ( a completely new and very frustrating discipline all by it’s self ). But hands down this is by far your best work.. old school machinery are things of beauty.. I appreciate the precision of modern tech, but how much more rewarding is sneaking up on a dimension with a set of callipers and a mic’ , plus if you overshoot it’s your own fault rather than a glitch in the machine…😁❤️💪🏻💪🏻💪🏻
the APs first turning was very impressive! gawd I'm jealous again 😋
I ran a pacemaker at my first job. Normal rughing was one revolution of the hand wheel about .020 feed without strain cutting 4140. The lathe was army surplus off a Navy ship and had a load meter that we thought was broken till I accidentally pushed it with a much harder feed.
I'd be willing to bet this machine has never gotten this type of love since it came off the show room floor🥰.
A full rebuild would be awsome to see. Have a Merry Christmas all.
We have a lathe like that at work except its a duplicating lathe. It has a hydraulic compound that follows a sample shaft that is mounted back behind the machine. I used to turn 8" dia x 36" 4140 shafts for overhead cranes. I would take .750" cuts at .030 feed.
We use a Mazak cnc lathe now and it is much faster for finishing but the old american will eat it alive for roughing.
There's a man making full use of his CRC degreaser sponsorship 😆
We measure liquid degreaser usage in units called "Obrochtas." So the proper amount to use per job is roughly 1 Obrochta of degreaser/solvent. This unit is primarily intended for use with brake cleaner solvent. Particularly nasty jobs may require 3-5 Obrochta of cleaner. On the other hand, sometimes you only need 500 milliObrochta of brake cleaner if you just have to give it a light little "how ya doin' mama" to make sure everything's nice and clean. 😎 Adam is using 1 or maybe 1.5 Obrochta of degreaser here so that's an appropriate amount. Pretend like you're the Old God and the dirt is everyone who couldn't get on the Ark.
Sounds more like the head stock bearings beating themself to death when you put pressure on it.
My thought too. 80 year old bearings are just that. Time for a replacement.
Regarding your chuck, Robin Renzetti's latest video addresses self centering chuck clamping and runout problems. I'm convinced if you clean up this chuck and follow his process that this chuck will serve you very well with minimal runout.
Yes I saw Robin’s video and agree that his procedure would work wonders for this chuck.
Merry Christmas Adam and Abby. Thanks for another great year of content. Something very satisfying about cleaning up an old machine, seeing the scars, and wondering what tales it would tell if only it could talk. That Pacemaker is a beautiful machine. Love the old Art-Deco styling. That tool holder has similar design elements and goes perfectly on that machine.
Suggestion, if you read this ... on the compound, make yourself a plug for the second unused tool post mounting hole. No sense packingnit with chips until the day you need it!
Great to see the Pacemaker up and running!
Thanks for sharing 🇨🇦
Merry Christmas from across the pond.
Merry Christmas to you, Abby, and your whole family, Adam. Thanks for the education and entertainment you give us, and I hope you have a fantastic 2023!
That's awesome. Really looking forward to you pulling the lathe apart.
Can't wait to see what's causing that noise as that's when things are going to be a true learning experience as we've already heard the noise so now time to see what's causing it. This way we all will learn from this as we get to see and inspect those guts along with you. Take care and enjoy this beauty.
Good video. Looking forward to seeing the clutch works and inside of the gear box. Great work
Merry Christmas to you and yours! Thanks for the exceptional content!
Magnifique remise en servis d'une machine qui peut encore réaliser d'inestimables travaux.
Bravo pour votre savoir faire et la pédagogie de vos vidéos.
Benny Rooman à Bruxelles.
merry Christmas , thanks for the quality videos as always
Great video. The filming was as good as usual. The music during cleaning was a plus. I enjoyed the video. Thanks
Good to see CRC being showcased in stereo from the outset. I love that stuff!!!!
Glad to see this lathe up and running again! I would not recommend using it too much before checking the head stock gears and bearings though; even from the video I can hear that something is very worn in there as you mentioned.
I have 3 pacemakers and I consider them lighter duty compared to American Type C’s I have but they are reliable and easy to work on and they get the job done and hold perfect tolerances I recently had that brass nut that rides on screw for cross slide break in two pieces so I have a parts machine and used it to fix my lathe and I did it while running my other job and took me two days to break down clean and replace and it faces really nice now and isn’t leaving a mark in center
Feliz navidad amigo a pesar de tener esas máquinas CNC no abandonas los tornos fresadoras lo de la vieja escuela 🙏👍Dios te bendiga ATI y tu familia amigo
Merry Christmas too you and your loved ones .thanks for sharing and creating all the wonderful vlogs for us during these trying times.wish you the best in the new years
Great to see a little TLC on the good old iron and making some chips in the miss of all the other projects you have going on keep up the good works!, y’all have a great Holiday!
That was great! We have been waiting a while to see the pacemaker throw some chips. Merry Christmas
Thank you Adam for the great video content you create for us viewers. Merry Christmas to you & Abby & all the subscribers, all the very best in 2023 Cheers and Blessings. 🙏❤.
That pacemaker is nice! I've also got a headstock noise and cross slide feed issue going on with my Cincinnati Hydrashift. I think the noise is pump related because it doesnt always shift gears. They feed issue I'm thinking is related to the "quick reverse" on the cross slide. Lots to learn!
Nice old machine, I'm afraid it needs even more attention and care.
That sound is clearly a sound of a worn out gearbox.
That gearbox needs an overhaul. Replacement of all bearings.
not surprising after 80 years
I guess we are going back to basics
Keep learning
Time for a new shop tour!
Never clicked a video sooo fast!
Congratulations Adam! I’m always impressed and entertained by your work. Attention to detail to say the least. You make me miss being a Machinist and running a Lathe!!!
Merry Christmas and Happy New Year to you and yours, Adam and Abby Booth.
Thanks for the videos.
Awesome! 👍 Definitely enjoy watching you work on this machine when you have time.
Merry Christmas to the booth family
Good to see that big boy making chips again. Assuming the internal scroll on the three jaw is in decent shape all it needs is careful grinding to true them up. If properly stressed with an outer blocking ring the jaws should clean up to .003/.005 total runout.
Your American pacemaker’s finally done and dusted, Looking forward to see some serious chips happening.
Merry Christmas and Happy New Year to you and your family.
Cheers 🎉
May need bearings.
Some of the 3 jaw chucks are adjustable from the backside of the chuck.
I think I would indicate the od of the 3 jaw chuck to just see if the run out is .012 also.
The shutter roll on the chuck is neat!
Merry Christmas Adam…thanks for all the awesome content you have shared this year.. Hope you and Abby have a fantastic day doing whatever makes you happy
This has been a long time coming! This is awesome! I've been following since about 2014 and remember you talking about a big Pacemaker back when you were at Motion, and here we are! I bet it feels nice pulling the first chips.
Thanks for sharing and Merry Christmas to you and the Mrs.
Adam, you need a sand-blaster and a ceramic bead tumbler.
Merry Christmas to you and Abby, Adam. I love seeing a beautiful made in the USA beauty brought back to life.
Merry Christmas from Finland!
Love to see these old machines.
Merry Christmas Adam and friends! Thanks for sharing your trade and passion with us all. All the best in the coming years- mjm
Mr. Booth I wish you and your family Merry Christmas and a Happy New Year . Greetings from germany.
Me too 🖖
Thank you Adam, guess I am liking the upcoming tune up you put on the Pacemaker. Merry Christmas to you and Ms. Abbey (sp)!!!
I was eager to see the pacemaker in action. Marry Christmas and Happy New Year
Awesome machine ABOM!! At a part time job I have in Boston I run a 30" American from WW2. Mostly 4 jaw and lots of face plate work. I love that machine. Enough iron to build 20+ Toyotas from..... Also a 16" Monarch that is almost as old, no sheet metal on either machine!!
These machines are what helped win WW11 I have Monarch from 1939 and it still holds perfect tolerance and I only paid 1000 US for it and a Lansig with clutch worn out for forward spindle for 250 USD and reversed phase wires and turned reverse into foward and ran it for 5 year like that then sold it for 500 6 years later cause I had a Chuck and quick change tool post I put on it and the guy was able to put a 220 single phase 10 hp Dayton on it and uses it as a hobby lathe tail stock and steady rest included
Excellent video again Adam. Great demonstration of the difference of a 3 jaw vs a 4 jaw.
Just needs a LOT of Love and we know that you will give it to the machine
Merry Christmas and Happy New Year
I keep a 10" wrench plier in my back pocket and its replaced every wrench I use that doesn't require more than a 10" handle's worth of leverage. Works great for grabbing hot material when bench/belt grinding, parting, bending sheet metal, or wiggling keys out of a tight keyway. Its not as fitting to this machine as an older style of wrench, but I can put enough beans into it for any compound nuts on any lathe.
Thanks Adam. Merry Christmas to you and yours
Seems like it likes heavier cuts, such a cool old machine!
Keep em coming!!!!
Strong lathe not convenient but useful for every machine shop.
This is my opinion.
Merry Christmas from sunshine Greece.
John Grizopoulos retired machinist
Greetings from Germany 🇩🇪👍
Always a pleasure to watch you work. Thanks for taking us along. That skyhook is looking better and better isn't it?
Merry Christmas to the Booth family. God bless & good will. Beautify old piece of history that just needs a little Adam love! May the new year find you well.
Happy Christmas Adam and Abby. Its really cool to see the old lathe up and working.
Merry Christmas Adam , don’t mind watching the clean up stuff at all, satisfying watching the shine come out of the old machine.
Nice Christmas present for your subscribers, Adam. I learn a lot watching you operate a lathe, especially the Pacemaker. Merry Christmas!
Dear Abom, I always enjoy your videos and work. A pleasure.
@abom7949 Not a problem. I have been watching you for years now. A real pleasure.
Merry Christmas Adam to you and yours. Nice to hear the big Pacemaker fire up. You'll have it tip top in due time, I know you will.
Cheers to everyone that got a new lathe for Christmas 🥳 I did👍👌🇦🇺
Music is a tiny step away from Hitchhiker’s Guide to the Galaxy, a very British radio show, book and film!
Nice video for a Christmas Eve! Loved it.....