Glad it helped. Can you please subscribe to my other channel? Your subscription will help me a lot on doing more videos like this. Thank you and have a good day! ruclips.net/channel/UCJMi86nN_-j-ceAoZr8k0BA ruclips.net/channel/UCkYiXuNkyJQjDqmjF6wdmMA
Great work!!nice. You have put the dell optiplex mainboard in the jobosn?? dou you have any problem whit specific mainboard conector ( like power switch, leds...) ??
If I'm seeing this correctly, if you use a mATX board you can only install a 3.5" on the bottom of the case which essentially covers its only ventilation holes. Is that correct? And then you can't install any case fans for proper air circulation?
Look on this link, the GPU can be installed is maximum 220mm. I think it will fit but you need to remove the HDD/SSD tray... smallformfactor.net/reviews/jonsbo-c2-sitting-in-the-middle/
Hi xian, id like to ask for the length of the front io cables, can it reach the top left corner of the motherboard? Im planning to build one using gigabyte ab350n
@@xianece1 I have another case but I didn't put any washers in screws They say standoffs is for protection and don't use washers it may cause electric short. Correct me if I'm wrong
there are some matx boards that are smaller than 244mm.. they are wrongfully called matx.. but should be called flexatx. but yes not all matx boards fit in it.
Great job on this video, it's very helpful.
very good unboxing video, mate! Thanks a lot
music is pretty neat.
Good review ..make me want to buy one for my self
Glad it helped. Can you please subscribe to my other channel? Your subscription will help me a lot on doing more videos like this. Thank you and have a good day!
ruclips.net/channel/UCJMi86nN_-j-ceAoZr8k0BA
ruclips.net/channel/UCkYiXuNkyJQjDqmjF6wdmMA
Great work!!nice. You have put the dell optiplex mainboard in the jobosn?? dou you have any problem whit specific mainboard conector ( like power switch, leds...) ??
asdfqwer1234, Hi! I used my old Intel board G41WV M-ATX motherboard not a dell motherboard.
Is posibble ssd and hdd 3.5 in bottom?
And what about ssd and hdd 2.5 in bottom? My mainboard is micro atx
For micro ATX: Only one 3.5" hard disk will fit at the bottom. Other option: two 2.5" hard disk or SSD at the same time at the bottom.
@@xianece1 thx sir 😊🙏
No fan?
Unfortunately, there is no fan mount, try to install a expansion slot fan
If I'm seeing this correctly, if you use a mATX board you can only install a 3.5" on the bottom of the case which essentially covers its only ventilation holes. Is that correct? And then you can't install any case fans for proper air circulation?
If using mATX board there is no room for fan
I got a 244 x 220mm motherboard and wondering if I should risk the extra 5mm clearance I don't have? Any ideas?
Thanks for the great video!
Look on this link, the GPU can be installed is maximum 220mm. I think it will fit but you need to remove the HDD/SSD tray...
smallformfactor.net/reviews/jonsbo-c2-sitting-in-the-middle/
Hi xian, id like to ask for the length of the front io cables, can it reach the top left corner of the motherboard? Im planning to build one using gigabyte ab350n
Raymond Salem Hi! the I/O cable is around 0.5 meter long.
Xian ece thanks! 😁
Can I take motherboard 244*215 mm?
Yes it is fit, Maximum mATX size of 245 x 215mm
@@xianece1 thanks
How is the quality of the Dust Filter?
I'm using the dust filter till now and have good quality.
Is it possible for a 235mm graphica card to fit ?
You can install it but you cannot use the Hard drive bracket.
This case looks nice but, it looks like there will be about zero airflow. :|
I recommend to add a pci slot exhaust fan (blower type)
@@xianece1 Do you have any to recommend?
Why did you use washers?
Washer or called an insulator between the motherboard and metal to avoid grounding outside the case.
@@xianece1 I have another case but I didn't put any washers in screws
They say standoffs is for protection and don't use washers it may cause electric short. Correct me if I'm wrong
You need to use standoffs and washers for protection. The washer I used is an insulator and not a conductor. You can use masking tape as alternative.
@@xianece1 thanks. My case will come soon 😊
Wait you uninstal the HDD Holder and then install your HDD on the place which is used for airflow and a fan
This is another option if your motherboard is wider
This model, there is not a fan?
Seakson kulma the fan is not included but you can install either 120cm or 140cm fan at the bottom when you're using mini-itx motherboard.
very good
Cho hỏi mua ở đâu vậy?
You can buy it in aliexpress.com
what I want to know is how the fuck this can fit a matx mobo when it is only 224mm wide XD
there are some matx boards that are smaller than 244mm.. they are wrongfully called matx.. but should be called flexatx. but yes not all matx boards fit in it.
There is zero ventilation.
Add a fan 60mm beside the expansion slot or a 120mm fan at the bottom
Is it possible to install a graphics card in this setup? I'm looking for a case replacement for my current tower
Iusethis4comments, Yes you can install graphics card with maximum length of 220mm