Nissan 370z Lowering Springs Installation Guide - Step By Step
HTML-код
- Опубликовано: 21 окт 2024
- H&R Lowering Springs: amzn.to/3vv9UNW
Tools required.
Metric Socket Set (10/12/14/17/19 MM)
Breaker bar + Ratchet Set
Spring compressor
Jack and Jack Stands
Vice / Pliers
370z Partlist:
LED Turn Signals (REAR): amzn.to/3recogM
LED Turn Signals (FRONT): amzn.to/2LaGFhj
25mm Wheel Spacers: amzn.to/3oytHri
N-Style Spoiler: ebay.us/ZPTZs9 (painted)
N-Style Spoiler: ebay.us/5scDXs (unpainted)
________________________________________
My Camera Gear
Sony A6400 (body only): amzn.to/2vJW3cy
Sigma 16mm Lens: amzn.to/2VRd3Z9
SoftBox Lighting: amzn.to/3cxUzCN
Microphone: amzn.to/2PNBin6
________________________________________
•Instagram: / performancedriven.co
Questions/Promotional Inquiries - Contact me: akdigitaldesign@gmail.com
________________________________________
Songs:
HORUSIII x HICAP x LAYNET - 3KINGS (No Copyright Trap)
• SmileyWRLD x HICAP x L...
IVXKR - Downfall (No Copyright Trap)
• IVXKR - Downfall [No C...
Was Here* - Deep End (No Copyright Trap)
• Was Here* - Deep End [...
________________________________________
#Nissan370z #LoweringSprings #370zmods #howto
Yeah, the back was stupid easy. I did the Godspeed springs. When I got my 370 it came with chopped springs. Good job man it really helped me.
Rears take not even like 10 mins I love that. Glad it helped, Thanks for watching!
How has the ride been?
Great job in describing everything . Quick question how’s your ride now as compared to before ? You noticed any difference or not ?
Thanks! And ride is just as oem you can't even tell the difference to be honest. I do scrap my front Nismo bumper here and there but apart from that I love the ride quality it's comfortable
Did ride height settle? I noticed the back was super high.
I lost my fender liner aswell question tho, did you have any issues with water splashing over the wires?
where did u get your spoiler from and how long it take to get it?
my sway bar end link nut was completely seized. i had to cut it off and buy a new end link. i still have to do my driver side but my passenger side was completely screwed up
Was the part No 53075 ? And did it say for NON NISMO ? I just bought these springs for my 2015 NISMO but is says for NON NISMO so now im confused lol
How did you re-align your top hat ? I’m having the same issue but I’m not sure how to properly align it.
I have same problem did you fix it?
hey i have a nissan altima coupe 2.5 2010. what lowering springs do u recommend?
thanks
im still waiting for te under shroud video
Dude you never explained how to align the top hat with the strut brace after you already put the new spring on. Did you have to take the spring off again just to change the top hat??
I didn't take it off completely I just compressed the springs a little and loosened the top hat to rotate it properly to align to the top 3 bolts and the bottom and then tightened up everything again and decompressed the spring. One thing I noticed is my front springs didn't sit on the notch insert of the strut but thats fine as long as everything is tight. Been daily driving since install with 0 issues
Can these fit on a Nissan fuga y50 ?
Hey bro is this part number 53075?
Aye we never got that follow up vid
do you know the wheel offset for those stock alloys
@Brispy Z34 how about the tire size I’m trying to get new wheels but I want the same stock setup
@Brispy Z34 thanks
Just putting in the springs is not the proper way to lower the car. On the rear the camber arms are fixed to factory ride hight. You have to put in adjustable camber arms to prevent wearing your tires on the inside. You’ll get maybe 10k use if you don’t. You’ll also need toe arms. For the fronts you’ll need upper A arms that’ll adapt. You’ll then need to get an alignment. Depending on rims and tires you may have to roll your fenders to get space.
🥲🥲🥲🥲 but that cost more than just buy lowering springs
Nice
With that V1 Nismo bumper there's really not a lot of room to lower the car. Notice he just takes it off the jacks and doesn't drive at all. Cuz that bumper is gonna rip right tf off. Whats the goal anyway? To reduce wheel gap? If all you care about is the gap at the top, I guess. But if you put taller tires on it and left it stock height, you'd fill out the wheel wells better on all sides, and you wouldn't scrape your splitter all day. Just my opinion
Rear springs, looks like stock)
It needs atleast 1-2 weeks to settle in the drop, it's much lower now I'll be posting an update on springs pretty soon
@@performancedriven 2 years later we ain’t see the follow up
Katsuni
11:29
The only problem here is that my Z is a winter Z and everything thing here is rusted…wish me luck guys