Nice, only change I would make is to make opening the Cyclone much easier. Maybe with some snap latches instead of the nut & bolt method, or maybe with some wingnuts so you don't need spanner all the time Great video
Wow! Such a complicated design. I would go with a very much simpler version using 5gal plastic buckets & plumbing elbows as found in so many other videos on YT.
I have some tips for the construction. As larger is the diameter of the bucket, so lower is the velocity of the particles. The entrance must be at the tangent to the circle (important). The diameter of the pipe connected from the external suction unit must be 1/4 of the diameter of the cyclone tub. The length of the vertical tube which is inside the cyclone at 3/4 of the height of the cyclone. (not the total length only the upper). Normally with calculations we can have more than 90% performance. Friendly Antony.
Судя по испытанию, тонкий фильтр пылесоса забился сразу, втягивал медленно мало, циклон собрал в основном крупную фракцию, которую и веником легко собрать. Этот мега проект к доктору, в рубрику всратых дюайваев.
Geile Idee. Daumen hoch. Jedoch: 1. Entleeren umständlich, da 4 M-Schrauben zu entfernen sind. 2. Pfosten für Kabelaufwicklung zu dicht nebeneinander, da so zu viele Schlaufen notwendig werden.
Eine praktische Frau...endlich...auch mir als Instandhalter ist die ganze Konstruktion zu aufwändig und im Endeffekt schwach und laut. Es gibt im Netz bessere Wege...
Im sorry to say it is no so effective. It needs calculation of material bulk density to be suctioned, the air flow rate, the capacity of the blower with respect to the volume of tge cyclone. The cyclone consists of two body parts the larger symetrical cylinder to allow the clean air to exit. and a conical shape to reduce the velocity of air to allow the more dense particles to fall down but maintain a pressure from inlet to outlet port. Anyway nice effort.
@@HandmadeCreativeChannel Я ж об этом. Ты говоришь почти как нейтив, но с акцентом. А вообще все сомнения развеялись, когда я увидел в твоём видео до боли знакомый компрессор типа "горшок" от советского холодильника.
Nice, only change I would make is to make opening the Cyclone much easier. Maybe with some snap latches instead of the nut & bolt method, or maybe with some wingnuts so you don't need spanner all the time
Great video
Wow! Such a complicated design. I would go with a very much simpler version using 5gal plastic buckets & plumbing elbows as found in so many other videos on YT.
Bucket is a lot safer to make and faster.. lol but it does look cool
It's a wonderful cyclone ♪
Thanks, it's still in use.
I love it. It's a "Brenda."
"She's not real pretty, but she works."
I have some tips for the construction. As larger is the diameter of the bucket, so lower is the velocity of the particles. The entrance must be at the tangent to the circle (important). The diameter of the pipe connected from the external suction unit must be 1/4 of the diameter of the cyclone tub. The length of the vertical tube which is inside the cyclone at 3/4 of the height of the cyclone. (not the total length only the upper).
Normally with calculations we can have more than 90% performance.
Friendly Antony.
👏🏻🤝👍🏻
Very very cool!!
Just science. Lower part can be bigger for dust deposit.
Bro. I've been trying to find this exact information for a week. THANK YOU. This is the most helpful comment I've come across in a long time.
Super👷👍
Very good
Судя по испытанию, тонкий фильтр пылесоса забился сразу, втягивал медленно мало, циклон собрал в основном крупную фракцию, которую и веником легко собрать. Этот мега проект к доктору, в рубрику всратых дюайваев.
Ничё что пылесос с регулятором и автор производил регулировки при испытаниях? ГЛАЗААААА твои к доктору!
Very cool. One suggestion would to use wing nuts to take apart easily
you really need to think more carefully about safety when using a router
Indeed, I almost lost my thumb to mine, his grinder was a tad scary too 🫣
The Kärcher vacuum cleaner is also very suitable👍
What is the pipe made out of? And what’s diameter of your dust separator?
Это сразу видать обьединена сантехник ,и плотник делать на совесь,но это пропускает фракцию мелкую это я лично собрал как вы сделали )
Simple?
What about when mom wants her vacuum back?
Geile Idee. Daumen hoch. Jedoch:
1. Entleeren umständlich, da 4 M-Schrauben zu entfernen sind.
2. Pfosten für Kabelaufwicklung zu dicht nebeneinander, da so zu viele Schlaufen notwendig werden.
Eine praktische Frau...endlich...auch mir als Instandhalter ist die ganze Konstruktion zu aufwändig und im Endeffekt schwach und laut. Es gibt im Netz bessere Wege...
the four-bolt locking system is too complicated. A lever hook system would be better
"П" - практичность! Гайки откручивать дольше, чем метлой на совок подмести, не говоря о нулевой скорости всасывания.
A "simple" dust collector?
Nice!
im not if i can call that "simple" but its cool
Congratulations, you made a vacuum into a bigger vacuum.
And all I use is an old pillow case zip and tied to the inlet and it's easy to empty and reusable 😅😅😅😅😅😅😅
I miss the Power from that Vakuum cleaner.
A mini THIEN DUST SEPARATE. 👍
Было бы очень интересно взвесить песок до и после уборки.
Я сделал из ведра из под краски 20литров и старого пылесоса циклон, нахлабучив на него фильтр от змз 406 бочка, вот и все
Some years ago I went ahead and bought the expensive doesn't work any better cyclone dust collector.
o kadar emek verip güçsüz bir süpürge ile bütün işi bozdun.
Everything else aside, that vacuum sucks. Like not in a good way
самая тяжёлая конструкция которую я видел)
Im sorry to say it is no so effective. It needs calculation of material bulk density to be suctioned, the air flow rate, the capacity of the blower with respect to the volume of tge cyclone. The cyclone consists of two body parts the larger symetrical cylinder to allow the clean air to exit. and a conical shape to reduce the velocity of air to allow the more dense particles to fall down but maintain a pressure from inlet to outlet port. Anyway nice effort.
What's not effective? It's still used, but with a vacuum cleaner for a workshop!
@@HandmadeCreativeChannel 👍🏻 It collects dust but i can't see any separation. Not enough CFM for my workshop. 👍🏻
It's not so good., is it. Because it's hard to dispose of trash.
How about not having to unbolt it for a start, that's just not smart at all.
Блин, братишка, купи двусторонний скотч, так страшно было за твои руки (и не только руки).
If that angle grinder hitches, don't try to catch it
Too complicated and clumpy
So I thought...this construction is...to me...useless..
All the crap you have to go through just to empty it
Iets minder snel afspelen, word er nerveus van.🤨
Хай, гай!
Посмотрел я пару минут назад рекламу твоего канала.
А ты нехило так по-английски чешешь. Но акцент к всё равно слышно.
Привет, друг. У меня есть акцент, но у меня очень хороший английский. Я жил и работал в Великобритании в течение пяти лет.
@@HandmadeCreativeChannel Я ж об этом. Ты говоришь почти как нейтив, но с акцентом.
А вообще все сомнения развеялись, когда я увидел в твоём видео до боли знакомый компрессор типа "горшок" от советского холодильника.
not happy with this design, 90 degree bends, too small pipe, really innefficient
even for a simple vaccum'
a plastic bucket and a couple of elbows gives a better result in about 10th of the time it took to make this load of crap
Техника безопасности!? НЕ, не слышал . )))
You didn’t think about how much trouble it would take to empty it, but you had enough brains to make the rest of it.
прошёлся бы по помойкам хоть бочок поискал бы нормальный)
D
Know
dirty work
kur-waty