Awesome job making this collector J. Separators can make life SO much easier. I just wish that shop-vac manufacturers would make their vacuums with separators BUILT IN. That way, the vacuum would just be taller with no extra footprint and also less hoses. I also like yours because you made it and save money over buying one.
I created something like this last winter. The two pvc sections going in the top, the one drawing air should be nearly flush and the one pulling the dust into the pail is about 6 inches into the pail so dust can't be sucked up to the vac container. I am not liking the rubber bands holding the two pails together. Cause someone will at some point pick them both up when the bottom is full of saw dust. I prefer friction holding the two together or wedging them into each other. If you cut slits into on of the tops the other will slide into the other. Other then that it looks great. Just try to find a connection pieces to go from the pails to a table saw. That was a nightmare jerry rigging pieces to connect them. You can't find any pvc that is 2 1/4 inside dimension which my saw needed. Had to use a landscape drain tile cover and invert it to make the connection.
From trash to real working tool! There is no need to spend hundreds of dollars, sometimes imagination and work helps to solve problems! Ingenious as usual!
I added a cyclone dust collector (13€) to my shop vacuum. The cyclone dust collector got coupled with an old oil barrel of 60L. In top of not needing to empty it very often, the filter never get clogged by dust as I use (the same) filter bag since 6 months. There is very few dust landing on the bag and basically no dust at all on the filter. Cheers
Same idea works great to change oil in small engines . But instead of pails you just use a quart jar with small plastic tubing. Thank you for the video...Awesome stuff.
До первой тряпки ... Как только всасывающий шланг засасывает что то крупное или просто упирается в пол, хватает 2-3 секунды, чтоб эти пластиковые ведра превратились в гнутый хлам или вообще разрывает давлением в клочья.. Пройденный этап. Нужно делать из металла, либо вставлять внутрь обручи, чтоб не плющило..
@@epicaxx6413 у меня то же стоит водопроводный обратный клапан, чуть получше.. Но всё же не успевал сработать, как только поставил ёмкость из 6 мм пластика всё стало ок
Never do this! A tube with an angle of 90 degrees will constantly clog if a long piece of wood gets into it. You need to cut a straight tube tangentially from the side. Никогда так не делайте! Трубка с углом 90 градусов постоянно будет забиваться если туда попадет длинная щепка. Нужно врезать сбоку по касательной прямую трубку.
Awesome job making this collector J. Separators can make life SO much easier. I just wish that shop-vac manufacturers would make their vacuums with separators BUILT IN. That way, the vacuum would just be taller with no extra footprint and also less hoses. I also like yours because you made it and save money over buying one.
👍👍👍
I created something like this last winter. The two pvc sections going in the top, the one drawing air should be nearly flush and the one pulling the dust into the pail is about 6 inches into the pail so dust can't be sucked up to the vac container. I am not liking the rubber bands holding the two pails together. Cause someone will at some point pick them both up when the bottom is full of saw dust. I prefer friction holding the two together or wedging them into each other. If you cut slits into on of the tops the other will slide into the other. Other then that it looks great. Just try to find a connection pieces to go from the pails to a table saw. That was a nightmare jerry rigging pieces to connect them. You can't find any pvc that is 2 1/4 inside dimension which my saw needed. Had to use a landscape drain tile cover and invert it to make the connection.
From trash to real working tool! There is no need to spend hundreds of dollars, sometimes imagination and work helps to solve problems! Ingenious as usual!
Excellent work, man! It's fantastic how it works! 😃
Stay safe there with your family! 🖖😊
REALLY EXCELLENT JOB. AND ABOVE ALL, CHEAP. CONGRATULATIONS
👍👍😊
Great job Love the rubber band trick very nice
I added a cyclone dust collector (13€) to my shop vacuum. The cyclone dust collector got coupled with an old oil barrel of 60L. In top of not needing to empty it very often, the filter never get clogged by dust as I use (the same) filter bag since 6 months. There is very few dust landing on the bag and basically no dust at all on the filter. Cheers
😊😊😊👍
Great idea man, I will do the same! 👍👍👍
Really nice and simple but very effective cyclone stay safe 😀👍
😊😊
I like how you use ur knowledge to make life easier 👍😊
😊😊👍
Same idea works great to change oil in small engines . But instead of pails you just use a quart jar with small plastic tubing.
Thank you for the video...Awesome stuff.
Perfect👍👍👍
Muchas gracias!!!
cleaning your filter whit compressed air, ALWAYS blow from INSIDE OUT
Edit, in the opposite direction of the normaal air flow.
Для того чтобы фильтр не забивался на него обычно одевают чехол из ткани.
좋네요^^
저 작업하다가 진공청소기 2개나 태워 먹었습니다. ㅠㅠㅠ 공업용으로 다시 구해야 될듯합니다.
전 아직 이상없이 사용중입니다.
항상 감사합니다.
@@j-woodworking9573 무슨일 있으세요?
영상도 없으시구 답글두 늦구요
아이디어 고갈중입니다
Muito bom
👍👍👍
👍👍👍👍👍👍👍👍
👏👏👏 🇧🇷
Holds more dust
de l'intérieur vers l'extérieur, oui
До первой тряпки ... Как только всасывающий шланг засасывает что то крупное или просто упирается в пол, хватает 2-3 секунды, чтоб эти пластиковые ведра превратились в гнутый хлам или вообще разрывает давлением в клочья.. Пройденный этап. Нужно делать из металла, либо вставлять внутрь обручи, чтоб не плющило..
Эта проблема решается вставлением в крышку обратного клапана, у меня например водопроводного. Пройденный этап😉
@@epicaxx6413 у меня то же стоит водопроводный обратный клапан, чуть получше.. Но всё же не успевал сработать, как только поставил ёмкость из 6 мм пластика всё стало ок
It's strong enough.
Thanks for watching sir.
Man if the bucket was transparent or had a window we could really see it in action.
Sorry about that.
Thanks for watching sir.
Never do this! A tube with an angle of 90 degrees will constantly clog if a long piece of wood gets into it. You need to cut a straight tube tangentially from the side.
Никогда так не делайте! Трубка с углом 90 градусов постоянно будет забиваться если туда попадет длинная щепка. Нужно врезать сбоку по касательной прямую трубку.
What a waste. You could have done it with one bucket and just put holes in the lid. Or better yet just clean your filter. Good effort though.
Que tristeza!
Ferramentas (brocas e cia), cegas!
Chega dá agonia.
non
Glaubst du wirklich, daß du PE mit irgendeinem Kleber kleben kannst?
I put silicon after glue.
Thanks for watching sir.
@@j-woodworking9573 Even silicone does not stick to PE! You only know PE by welding! Do you understand?
I used plastic baskets and plastic pipes. No need to weld. Thanks sir.
Dumb. I just use a 20 gallon trash can with a good lid.
I’d rather just clean the filter then deal with an extra contraption.