Replace your space heater, it is not worth burning down your house over. Relays rarely stick when an AC current is applied unless they are severely worn out. This project was a capacitor bank for a miniature railgun, the relays that we're made for AC current only welded themselves together whenever it was charged or fired due to extremely high amounts of DC current.
Even Omron realys wouldn't handle the abuse I was giving these, if you paid close attention the relays were part of a circuit that rapidly charged and discharged a capacitor bank for firing a miniature railgun.
the scientific approach of hitting it with a heavy object.
aka percussive maintenance.
Sticky relays make a delay while going off .. anyways good job
used this to diagnose a fuel pump relay on my car, pretty much just fixed my car with a hammer
I drill two small holes & spray electric cleaner inside then let it dry for a few hours before pulling it back
Lol I have the EXACT same relays. Doing the same thing. Did you find better ones?
So mine will fix itself once I hit it but it gets stuck again 2 seconds after. :/
A permanent fix is to use a servo motor with a crescent wrench to hit it after each use!
😂😂😂
just fixed a space heater with a hammer lol
Replace your space heater, it is not worth burning down your house over. Relays rarely stick when an AC current is applied unless they are severely worn out. This project was a capacitor bank for a miniature railgun, the relays that we're made for AC current only welded themselves together whenever it was charged or fired due to extremely high amounts of DC current.
change relay with omron brand.
Even Omron realys wouldn't handle the abuse I was giving these, if you paid close attention the relays were part of a circuit that rapidly charged and discharged a capacitor bank for firing a miniature railgun.
you still need to replace it.
It worked...lol... Maybe it's temporary but knock knock does the job... Haha
lol