Hyundai i30 Diesel Fuel Filter Replacement Job. Changing a Diesel Fuel Filter on Hyundai i30

Поделиться
HTML-код
  • Опубликовано: 31 май 2022
  • Hyundai i30 Diesel Fuel Filter Replacement Job. Changing a Diesel Fuel Filter on Hyundai i30
    Please like share and subscribe my channel. Thanks.
    #hyundaidieselfilter
    #hyundai
    #hyundaifuelfilter

Комментарии • 76

  • @jamesbrand9556
    @jamesbrand9556 Год назад +6

    Thank you for this video. I just helped my son replace his fuel filter and your video made this very easy for us.

    • @diykhan
      @diykhan  Год назад

      Good to hear from you. Thanks

  • @andywallhole483
    @andywallhole483 Год назад +9

    On our 2010 i30 I changed the filter without removing air duct or the entire shroud. Just remove top nuts from the shroud and flex it away from firewall at which point you can remove filter housing bolts and wriggle it out past the intake duct.

  • @highlandminger4009
    @highlandminger4009 Год назад +5

    Nice video, showing where all the bits are , and how to remove it. The only thing I would say that was missing was showing everyone how to pump the air out of the fuel line by pushing down on black knob on top of the fuel filter casing until the gas spurts out the fuel port, then connecting the orange and blue fuel lines. This video helped with finding it's location in the engine bay and how easy it is to do cheaply. Thank you

  • @awo1fman
    @awo1fman Год назад +3

    Thanks for this. I've never worked on a diesel before and was daunted without a service manual. Didn't know where to start or what was involved. This made it a piece of cake!

    • @diykhan
      @diykhan  Год назад

      You are welcome thanks 😊

  • @drsolace
    @drsolace Год назад +1

    Thanks a lot for this guide, I had code 1186 and the engine could not rev higher than 3000rpm. A new fuel filter solved that problem! One thing I will recommend for anyone reading is DO NOT unscrew the clamps on the fuel filter and turbo completely. Leave them threaded like you did here. I unscrewed the first one and lost the bits down the bottom of the engine when I was trying to put it back together.

    • @diykhan
      @diykhan  Год назад +1

      You are welcome 😊

  • @johnmcgreevy6495
    @johnmcgreevy6495 Год назад +1

    Thanks so much just don't my 1st fuel filter and was a walk in the park because off your video

  • @richardgooderham6276
    @richardgooderham6276 8 месяцев назад +1

    Great video, clear and concise, i see the other fella still hasn't explained his technique lol

    • @diykhan
      @diykhan  8 месяцев назад

      Thank you 😊

  • @huss1205
    @huss1205 Год назад +2

    I changed it today on my car at some workshop here in Sweden, paid almost $200 for this 30 minutes job. Next time I will do it myself.

  • @BigThommo
    @BigThommo Год назад +1

    Simple and easy.
    Thanks mate.

  • @MrBrendanrex
    @MrBrendanrex Месяц назад +1

    Thanks, I needed this to remind me how to do it! It might be a good idea to put a plastic bag over the turbo inlet so you don't accidentally drop any small tools or screws in it. Just make sure you take it off when ready to fit the air hose back on.

    • @diykhan
      @diykhan  Месяц назад

      Thank you 😊

  • @rallyrdf7956
    @rallyrdf7956 20 дней назад +1

    Obrigado explico tão fácil que mesmo sem intender inglês eu vou trocar o meu

  • @guylestrange8840
    @guylestrange8840 2 месяца назад +1

    Thanks Khan!!😊

  • @pavlospavlos2730
    @pavlospavlos2730 9 месяцев назад +2

    Thank you for your video, very good job!

    • @diykhan
      @diykhan  9 месяцев назад +1

      You are welcome thanks

  • @ylbersallova7091
    @ylbersallova7091 2 года назад +2

    well done, thank u

  • @tgreaker
    @tgreaker Год назад +1

    Very nice video and tutorial. Thank you very much!

  • @benjohnson5354
    @benjohnson5354 11 месяцев назад +1

    Cheers for the video. Nice and simple.

    • @diykhan
      @diykhan  11 месяцев назад

      You are welcome thanks 😊

  • @richardrichard5409
    @richardrichard5409 2 года назад +1

    very good video, many thanks

  • @savethebees7719
    @savethebees7719 Год назад +1

    Thank you for this video, sir. I had failt code P1186 fuel pressure to low, and the car had big problems. Learned and fixed it, thanks to your video.

    • @diykhan
      @diykhan  Год назад +2

      Good to hear from you. Best wishes and thanks.

  • @charliediver1560
    @charliediver1560 Год назад +1

    Great video thanks for sharing .

    • @diykhan
      @diykhan  Год назад

      You are welcome thanks 😊

  • @rodenvadzlumba8494
    @rodenvadzlumba8494 8 месяцев назад +1

    thanks for this video, great job !

    • @diykhan
      @diykhan  8 месяцев назад

      Thanks you.

  • @AhmadAhmad-px2km
    @AhmadAhmad-px2km 8 месяцев назад +1

    ❤ great job brother thank u so much 👍

    • @diykhan
      @diykhan  8 месяцев назад

      You are welcome 😊

  • @luddetutiluren6055
    @luddetutiluren6055 Год назад +1

    Good work, though you forgot to pump out the filter of fuel before removing it and filling it up when putting it in.

  • @theginge6064
    @theginge6064 Год назад +1

    Cracking video mate

    • @diykhan
      @diykhan  Год назад

      My pleasure sir. Thanks

  • @Highlandwoodandmetal
    @Highlandwoodandmetal 5 месяцев назад +1

    Cheers! made the filter change simple...

    • @diykhan
      @diykhan  5 месяцев назад

      You are welcome 😊

  • @billy28
    @billy28 Год назад +1

    Excellent Thank you.

    • @diykhan
      @diykhan  Год назад

      You are welcome thanks 😊

  • @AC-db4ek
    @AC-db4ek 3 месяца назад +1

    is this the 1.6 crdi ? It looks not that complicated to do it. Thank you for sharing.

  • @ClipuriDiverse.21
    @ClipuriDiverse.21 Год назад +1

    Tks man !

    • @diykhan
      @diykhan  Год назад +1

      You are welcome thanks

  • @georgebush2798
    @georgebush2798 18 дней назад +1

    Thanks mate

    • @diykhan
      @diykhan  18 дней назад

      Thank you 😊

  • @savethebees7719
    @savethebees7719 Год назад +1

    Hello. Great video!
    My car is motorcode: D4FB-L, CRDi 16v, 2011 mod.
    Is this an engine (motorcode): D4FB-L ?
    There are filter with 6 holes and 8 holes.

  • @funhappydays
    @funhappydays Год назад +1

    Great vid thanks. Can you show how to change injectors on this please bud?

    • @diykhan
      @diykhan  Год назад

      You are welcome thanks

  • @bikeman123
    @bikeman123 3 месяца назад +1

    Why do manufacturers make regular service items so difficult to get to? The i30 isnt as bad as some. I notice that one of his mounting nuts was missing and one of the fuel lines had a broken retainer clip. Thats what happens when manufacturers mount stuff awkwardly.

  • @stephenfoster6020
    @stephenfoster6020 Год назад +1

    Just done mine 👍

    • @diykhan
      @diykhan  Год назад +1

      Wow great work 👏

  • @dpacmall
    @dpacmall Год назад +2

    Bro can you show how to change the heater matrix on this car please. Thank you 😊

    • @diykhan
      @diykhan  Год назад

      Ok I will soon. Thanks

  • @famcape4519
    @famcape4519 Год назад +1

    Clip broken off on my fuel pipe can I use cable ties?or it will leak?

    • @diykhan
      @diykhan  Год назад

      The cable ties n fix it for the time being but its best to buy new clip.

  • @AC-db4ek
    @AC-db4ek 3 месяца назад +1

    is it the same for KIA Ceed?

    • @diykhan
      @diykhan  3 месяца назад

      Yes

    • @diykhan
      @diykhan  3 месяца назад

      It is same as kia ceed

  • @serr78
    @serr78 Год назад +1

    👍🌷

    • @diykhan
      @diykhan  Год назад

      You are welcome 😊

  • @elgingjozi6492
    @elgingjozi6492 2 года назад

    Does the changing of fuel filter help spent less diesel???

    • @diykhan
      @diykhan  2 года назад

      Yes it will help to run the engine smoothly and will give better fuel economy

    • @elgingjozi6492
      @elgingjozi6492 2 года назад

      @@diykhan thank you

    • @elgingjozi6492
      @elgingjozi6492 Год назад

      @@diykhan all was goung ok the the filter replacement but now the prolem is that the car wont start

    • @diykhan
      @diykhan  Год назад

      Hi. Did u prime the filter by pushing the primer pump 10 times till it becomes impossible to press down.

    • @elgingjozi6492
      @elgingjozi6492 Год назад

      @@diykhan ok i did it by pressing it and the car started , buy now i im abit afraid maby is air inside again and can cause maby problems?!🤔what do you think ? Since i didnt bleed it

  • @thimich
    @thimich 9 месяцев назад +1

    lame, it could be MORE EASY; trust me, i worked on that cars. You did a lot of handeling that where unnecessary

    • @MrJokkoma
      @MrJokkoma 9 месяцев назад +5

      You might upload a film where you do it perfect then, so we can compare them.