How I Created My Perfect Reloading Area
HTML-код
- Опубликовано: 7 сен 2022
- Completed reloading area tour. What equipment have I chosen, how do I have it set up? It's perfect for me, would it work for you?
@Ultimatereloader For the idea on the T Tracks !
Reloading items I Like (affiliate links)
Real Avid Precision Bench Vise - Best Price I've Found
amzn.to/3TXMfBh
Forster Co Ax Press - Creedmoor Sports
bit.ly/48lRzWi
RCBS Brass Boss Case Prep Center
amzn.to/3Uafdy1
Frankford Arsenal Platinum Series Rotary Tumbler
amzn.to/3VYqjrH
Frankford Arsenal Universal Precision Case Trimmer
amzn.to/3NaA55Z
Dillon Precision CM-500 Case/Media Separator - I didn't get this one but, I like it better than the Frankford
amzn.to/3gM6XWz
QWORK Micrometer Stand - A great stand and about 1/5 the price of a Mitutoyo Micrometer Stand
amzn.to/3U0gjMy
Armor All, AA255 , 2.5 Gallon 2 Peak HP Wet/Dry Utility Shop Vacuum
amzn.to/3EUEHL5
EFINE 4 Shelf Shelving Unit
amzn.to/3PRPAkw
#viral #diy howto #reloading 
Спорт
8:35 “Bonus Room” 😮😂
That’s awesome man!
Thank you
Hell yeah nice set up and welcome to the reloading rabbit hole!
Thanks!
Nice looking reloading bench. Drive on.
Thanks!
Great set up Crusty!! So good to see all the additions and embelishments you have added. My cousin - Marine - my father Army vet vietnam - my sons freinds Army and Marine - Keepin the flame lit! Thank you for your service and thank you for defending our nation. I reload plenty and enjoy everyone that is in the same mind set as myself. God Bless
Hey Craig, thanks for watching and thanks for your comments and support !!
My gun room needs an overhaul. Mine looked this good once.
I started reloading shotgun shells with hand held press that used a hammer and a punch to deprime. That was in 1968. Now….Dillon 550 and a 1050.
Reloading ammo is a great was to channel the natural DIY engineering skills possesses by all real Americans. Welcome to the community.
Mine's a little messier now...lol Getting ready to expand so I can be more organized once again.
Nice setup, Keep the carpet clean
Absolutely!! The little Armor All Shop Vac works great. Thanks for watching!
Hey there Crayon eater, thanks for the content. I'm starting to get into reloading, mostly for hobby reasons, just something to do when I have time off. I like your setup and may try to emulate it. Thanks for your service bro.
Thanks for watching (& hopefully subscribing) and thank you for YOUR service !!
@@CrustyOldMarine definitely subbed, looking forward to more content.
You can get a window fan to put in to suck the hot air out. At one point they were about $30 I don't know what they cost now. I use one in my armory when I'm melting lead.
Very nice setup! Whats the wood setup under the 5/8" plywood?
It's an inch and 3/4 thick LVL Beam (plywood) I got several of those at no cost a couple of years back. You could probably visit your local Truss Company and get some leftovers and/or purchase. Thanks for watching!!
Great set up Marine! Semper Fidelis brother!
Thanks!! SF
Amazing setup
Great set up.
THANKS !!
Nice setup !!!
Good idea with the track system.
We moved almost 2 years ago. Just now getting around to setting up my stuff.
Bench placement location is critical - for nice work flow & ease of operations.
For me, space is as critical as flow, as mine may be a little unconventional. Probably why I recently added another bench...lol Thanks for watching!
Love it!! I have my own flags several same as you. I'm a retired squid and just as crusty as yourself.... LOL. I also represent the House of Gordon here in Colorado for the games, Go Scotland. I like your reloading room. I have a nice little set up myself ;)
AWESOME! Thanks for the comment and THANKS FOR YOUR SERVICE! Clan Gordon... I can like you then, since my Scot comes via marriage it makes me Clan Donald/McDonald and in their prayer they ask for "guns, knives and, swords, enough to kill all the Campbells and Dalrymples"....lol
Wonderful room. Very inspiring.
Thanks! Just added another Bench to it
Nice!
Great video and im glad you explained what the meaning behind the flags you have up because i was curious to what they meant. Thanks for your service and you have gained a new subscriber.
Glad you liked it! Thanks for watching and your subscription.
Welcome to the reloading community. Just beware, next comes casting and progressive press great room you have brother. 👍
Thanks! I can MAYBE see casting for pistol rounds (my buddy already does) but, for my rifle stuff, I'm sure I'll stick with high end, high B.C. bullets from Nosler, Sierra & Berger
Gotta be dropping your own lead shot too.
@@GoldCountryTrapping One of my shooting buddies does that, mostly pistol cal.
Very nice…semper fi
I do have a question. Did you replace the door with something heavy duty and maybe add a deadbolt? Also do you have a set of actual freedom stick screwdriver bits (i.e. Wheeler)? Do not use the Craftsman screwdrivers on your Freedom Sticks.
I do not have a heavy duty door/deadbolt, never really gave it a thought given our occupancy but, GREAT IDEA thanks!
Also yes, I have proper screw driver's and other tools for Freedom Sticks. There's alot of other items and work goes on in there too though. Thanks for watching!!
I’d love to have this much room!!
Yeah I'm pretty fortunate in that regard but, still not quite enough...lol. Going to do another video on the "expansion" Thanks for watching!
You've given me a lot of great ideas. Hooah. Rangers lead the way!
Good deal! Thanks for your service & thanks for watching!
Nice setup. Looking to make my own bench also. Do you have a list posted anywhere with how you constructed the bench. Semper Fi Marine
I will have in an upcoming video I hope to get up this week. Thanks for watching!
@@CrustyOldMarine thank you for the reply. I will be looking out for the video
Semper fi. 👍
Oorah!
Hey Crusty, I noticed your bench sets on carpet. Do you have it bolted to the wall? Has it shifted / settled into the carpet since it was built? I've been struggling with the thought that the bench would have some settling and would have to be shimmed to bring it back to level. So, because of that "potential issue, I have not yet built mine. But you setup looks promising.
Not bolted to the wall and no real settling. It's a very low pile carpet and the bench weighs a ton...lol. I like it so wellI (& neede more room) I built a 2nd one just like it. Thanks for watching !!
How close to edge os the front t-track? Did you just route edges? Is there a little gap in front or is it just the t track by itself-thanks
Front T Track edge is flush with edge of bench. Rear one is 8" O.C. I did not route the groove. Measured the rear piece of top to requirements, screwed down rear t track. Set front one in place, checked measurement/spacing (was correct) screwed it into place then ripped middle plywood piece to fit.
@@CrustyOldMarine so I am using a 1.5” butcher top for my bench- I was worried that the front t track would not be braced enough-never used t track before and was wondering if there was a slight space-is the t track pretty much flush? Like it wouldn’t catch on stuff like clothing or such?
@@onesht1kl mine is flush. They Heavy Duty T track is 5/8" thick/deep. If you're using 1.5" Butcher blcok, routing a channel would be your best option
Any issues with having carpet there? That’s one concern I have
Not really, as long as I don't care if it gets a little messed up...lol Carpet is 25 years old, not a ton of previous traffic but, not a problem if it gets messed up. Once it does, I'll rip it our and put down hardwood. If you have carpet and want it to stay nice, might be a bit of an issue
Semper fi
Well done Marine, Semper Fi.
For the record, I identify as an alligator and my pronoun is Bite Me.
Haha, we all gotta be "something" these days, right? I like it. Thaks for watching!
Just for safety, I suggest you keep a fire extinguisher in there and store powder and primers in a safe place outside the house except for what you’re using at the time.
Smh.
Plans on the bench?????
You mean like a blueprint?? Only in my head...lol I used to do construction. I'd be happy to give you the dimensions, materials used and how assembled and why if you like.
Don’t ever give in to them nuts! Nice set up, be well my friend
Thanks !!
No pronouns allowed in the room? 😂
HaHa.... Any are allowed but, some folks might not like the ones I use 😂
Down with wokeness.
Meaning you don’t like it or that you’re down with it? 😂
At 00:6:30 - Goebbels, the propagandist.