The paint roller looks like it might be good, but that "built-in paint shield" isn't going to work for squat, as anyone with any experience painting knows. There are all manner of "separate part" paint shields, and they never work, no matter how careful you are -- paint always gets on an edge, then somehow works around the edge, so paint gets smeared on a non-paint surface.
@@TrashyLobster The average person is lousy with a brush because they don't paint on a regular basis. I'm more of a masking/caulking guy and I always get good results...
Fair enough. But he didn’t say Steve Jobs pioneered the saying. He just said that Jobs liked to say it and that it was a philosophy he believed in. So he doesn’t say anything about it’s origins.
Work smarter not harder is still a lazy man’s (read:union) creed. Sometimes you’ve still got to roll up your sleeves and just work hard to get things done. There’s a whole lot to be said for working smart, but it doesn’t mean there’s always a way around the hard stuff
Most of these nifty tools look like they're invented by accountants. I have always found that in most cases, the old methods work best and cost a lot less.
Only problem with that Baker. Scaffold joystick is as soon as you hit a rock or something on the job site. The things's gonna tip over. There's a reason why you're not allowed to move the baker's scaffolding while standing on it 😂
The paint dispenser you can attach to a tap to clean its head directly into a bath, is interesting. However by doing so your putting paint directly in to the water recycling system and where I live that is an offence, it’s definitely not environmentally friendly!
Depends on the paint, since there are water based and environmentally freindly paints usually used, there is no problem in cleaning the tool with the tap.
@@deineroehre correct but how many people do you know, that know there is different kinds of paints and how they might react In the different environmental factors? I fix drains every year that are full of diy material waste (paints , putty, plaster, tapes, sawdust etc… ) generally speaking to the unknowing, toilets and sinks are not disposal receptacles. Buckets and kitty litter make it a solid for the landfill.
Not too good. Slate has no friction surface, whereas shingles are designed that way. Different material is needed to use on slate. Not to say they don't have a version for slate... 👍
The bottom seems to have a layer of foam rubber that conforms to the rough surface of the gravel on the shingles. It looks handy, I may try to make one next time its needed. It would probably just wipe slates clean and slide.
Um that wire stripper has been FREE with any Krone network purchase for the last 30 years LMFAO they ain't new now does it look any different to the original
What ? Theres all sorts of moving style lifts already so why wouldn't this be allowed ? Scissor lifts, boom lifts, and I've got scaffolding with wheels also so dont see that being any differant.
I cant believe you are happy for that Baker lift driver....on the instructions of every Baker scaffold I have ever see there are very strick warnings that it is " not designed to be moved with the user on board" its unstable and very unsafe ....yes a company can make a toy for anything but this device should not be put there putting lives at risk...and some poor unfortunate worker will go..." but I figured since we had one of these they were safe" no STOP THIS THING NOW
@@Robert_Wilson584 I have lost a lot of money in the stock market and my inability to make that money back from it has been a constant source of frustration for me.
@@07gang80 Do you have a financial advisor? I also lost a lot of money in the first few years, but I met an investment advisor named Dan price cfa last year and he helped me make back $14W in a year's time, which made me very happy.
That paint roller just sucks. Doesn't roll smoothly, spotty coverage, the so-called cut-ins leave an unpainted border line. Surprised they included it.
@@YTubeSDD you could do it outside into the earth. Or if you don’t like that. Wash them out into a 5Gal bucket then add kitty litter to make it a solid for the land fill. Same with old paint and especially drywall mudds. Or down your drains, I like money 💰 too.
Very educational & informative for me a senior lady who has always enjoyed tagging along with my latexDadcto hardware stores...&...assisting him with home "honey-do-tasks" even though sometimes I showed my impatience as I may have been less than enthusiastic. I miss may late Dad who's been gone for 30 years.
It is so strange that American and Australia have such different roofing systems. America has (or seems to have) framed timber roofing covered with plywood (or similar as the rigid covering) and then with asphalt ‘tiles’, but I have never seen asphalt tiles/shingles in Australian. Australia seems to have mostly similar timber roof structure but then covered with terracotta or concrete tiles , or colourbond style sheeting which as the both the weather protection and the rigid roof.
content is fairly interesting. but why does the "music" have to be so terrible? i would watch more of these if the music wasn't so off-putting and terrible.
The paint roller looks like it might be good, but that "built-in paint shield" isn't going to work for squat, as anyone with any experience painting knows. There are all manner of "separate part" paint shields, and they never work, no matter how careful you are -- paint always gets on an edge, then somehow works around the edge, so paint gets smeared on a non-paint surface.
Exactly, just cut in with a brush.
@@TrashyLobster The average person is lousy with a brush because they don't paint on a regular basis. I'm more of a masking/caulking guy and I always get good results...
The price of the tubing cutting might be a bit high but after your first couple of catalitic converters you will recover the cost in no time.
Unless they take the resonator instead of the Catalytic converter, that is. Saw that on the Mechanical Nightmare channel, more than once. 😆😆😆
Or the Cops catch you at it & lock your thieving ass away !!
People have been saying work smarter not harder way before Steve Jobs was ever born FACTS
Fair enough. But he didn’t say Steve Jobs pioneered the saying. He just said that Jobs liked to say it and that it was a philosophy he believed in. So he doesn’t say anything about it’s origins.
Name twenty people who said it first
Work smarter not harder is still a lazy man’s (read:union) creed. Sometimes you’ve still got to roll up your sleeves and just work hard to get things done.
There’s a whole lot to be said for working smart, but it doesn’t mean there’s always a way around the hard stuff
Also ,work the work don’t let the work work you.
That paint roller WILL make the biggest mess you can ever think of!
4:49 or just use a sawzall
The Tera pump is ideal for fuel thieves.
Most of these nifty tools look like they're invented by accountants.
I have always found that in most cases, the old methods work best and cost a lot less.
Not the thieves of catalytic converters have a nice new tool, excellent.
Only problem with that Baker. Scaffold joystick is as soon as you hit a rock or something on the job site. The things's gonna tip over. There's a reason why you're not allowed to move the baker's scaffolding while standing on it 😂
That scaffolding thing looks terrifying
Can I grow plants with those infrared lights?
Yeah those new fandangled tools are all good and fine if you like doing things the easy way😮
No way I would trust those roof friction platforms.
Finally some( few) tools I can afford. Thank you!
That Jorgensen Clamping Miter saw is just like an antique one my Father had! Nothing new!!
The paint dispenser you can attach to a tap to clean its head directly into a bath, is interesting. However by doing so your putting paint directly in to the water recycling system and where I live that is an offence, it’s definitely not environmentally friendly!
Depends on the paint, since there are water based and environmentally freindly paints usually used, there is no problem in cleaning the tool with the tap.
Great attachment, right. And I agree inside drains, not the best. But most likely plenty of adapters to fit the spigots outside or on a hose end. 👍🏼
@@deineroehre correct but how many people do you know, that know there is different kinds of paints and how they might react In the different environmental factors? I fix drains every year that are full of diy material waste (paints , putty, plaster, tapes, sawdust etc… ) generally speaking to the unknowing, toilets and sinks are not disposal receptacles. Buckets and kitty litter make it a solid for the landfill.
The power scaffolding that is.
BIG TIME!!!
5:45 saw
I wonder what the roofing wedges would be like on wet slates (UK)?.
Not too good. Slate has no friction surface, whereas shingles are designed that way. Different material is needed to use on slate. Not to say they don't have a version for slate... 👍
The bottom seems to have a layer of foam rubber that conforms to the rough surface of the gravel on the shingles. It looks handy, I may try to make one next time its needed. It would probably just wipe slates clean and slide.
They are glowing to felt paper??? What good does that do???
Um that wire stripper has been FREE with any Krone network purchase for the last 30 years LMFAO they ain't new now does it look any different to the original
It's too high; I'm ashamed of it, and I wish I'd spent more time with my dog
i believe in working smarter and not harder but some of these are just laziness
The merry-o Brothers lmao. I wonder if he's ever played lol.
Steve Jobs didn't say that first.
That rolling scaffolding would not be allowed on most job sites . Over 2000 scaffolding accidents recorded each year in USA .
What ? Theres all sorts of moving style lifts already so why wouldn't this be allowed ? Scissor lifts, boom lifts, and I've got scaffolding with wheels also so dont see that being any differant.
I cant believe you are happy for that Baker lift driver....on the instructions of every Baker scaffold I have ever see there are very strick warnings that it is " not designed to be moved with the user on board" its unstable and very unsafe ....yes a company can make a toy for anything but this device should not be put there putting lives at risk...and some poor unfortunate worker will go..." but I figured since we had one of these they were safe" no STOP THIS THING NOW
Workers will be fine, safety second I say!
i really like these Tools / Gadgets Videos amazing what there is on the market amazing!
I may be ignorant, but what is a "bachery"?? You mentioned that a few times...
I enjoyed your video so I gave it a Thumbs Up
They did not not show batter board. That is what I watched for. Waist of time should show & explain what is shown.
the marry-oh brothers, huh..........well there goes the last 30 years of me calling them mar-e-o brothers (3 syllables, rather than two)
Work smarter not harder, Allen F. Morgenstern not Steve Jobs
The terapump looks great. Now my wife can move gas to her van without my help.
16
Yes Sir. The ratcheting pipe cutter is worth the $132. That's not even in question here. (I guess unless the quality is really bad.)
These are useful but it doesn't help me make money in the stock market and I'm bitter.
LOL, you can cheer me up by telling me what happened to you.
@@Robert_Wilson584 I have lost a lot of money in the stock market and my inability to make that money back from it has been a constant source of frustration for me.
@@07gang80 Do you have a financial advisor? I also lost a lot of money in the first few years, but I met an investment advisor named Dan price cfa last year and he helped me make back $14W in a year's time, which made me very happy.
@@Jerry_Offord How much does he charge, I guess I am due for a stock investment advisor.
@@07gang80 His first three months are free, so you might consider consulting him. Just google Dan Price cfa to find it.
Was that BDR?
Just discovered this channel and already been through tons of vids. Content is great!
If I had to watch ads for 10 hours straight I would watch this he makes it more entertaining , enjoyable .
Interesting videos
That paint roller just sucks. Doesn't roll smoothly, spotty coverage, the so-called cut-ins leave an unpainted border line. Surprised they included it.
Your video advertised a batter board tool. But never showed it in collection of videos
PLEASE DONT WASH PAINT INTO YOUR DRAINS, I LOVE CHARGING $250 hour to clean them out.
Where do you wash your latex paint brushes?
@@YTubeSDD you could do it outside into the earth. Or if you don’t like that. Wash them out into a 5Gal bucket then add kitty litter to make it a solid for the land fill. Same with old paint and especially drywall mudds. Or down your drains, I like money 💰 too.
@@1234GOPRO I guess the kitty litter bucket idea isn't too bad. Thanks.
Pls do more stuff like that! Never miss the new uploads
Ever found your self saying, more than once, " that's a good idea "?
Very educational & informative for me a senior lady who has always enjoyed tagging along with my latexDadcto hardware stores...&...assisting him with home "honey-do-tasks" even though sometimes I showed my impatience as I may have been less than enthusiastic. I miss may late Dad who's been gone for 30 years.
Good . I like ❤ !
Wonderful Content & Love You Brother ❤❤❤
It is so strange that American and Australia have such different roofing systems. America has (or seems to have) framed timber roofing covered with plywood (or similar as the rigid covering) and then with asphalt ‘tiles’, but I have never seen asphalt tiles/shingles in Australian. Australia seems to have mostly similar timber roof structure but then covered with terracotta or concrete tiles , or colourbond style sheeting which as the both the weather protection and the rigid roof.
It’s not OSHA approved.
❤
Tarea 16
content is fairly interesting. but why does the "music" have to be so terrible? i would watch more of these if the music wasn't so off-putting and terrible.
10) is $10 on aliexpress...what a rippoff this channel is...
8 minutes 55 second mark...3 meters is 9 ft not 10. ..get your measurements right before posting videos that contain measurements....thank you
It’s closer to 10 feet than to 9 feet. Get you facts right before calling someone out.
Just discovered this channel and already been through tons of vids. Content is great!
Just discovered this channel and already been through tons of vids. Content is great!