Fixing JBL Headphones where one side does not work (example TUNE 600 btnc)
HTML-код
- Опубликовано: 25 дек 2020
- This video explains how to fix a problem with JBL headphones where one side is not working. In this example we are using the JBL TUNE600 btnc, but this procedure can also be used on many other JBL Bluetooth headphones.
There are probably issues with headphones other than the one we explain here. In this case we are taking a look at a problem with the springs, which create the electrical contact of the driver to the PCB. In case these contacts are corroded, we can simply clean them up and the headphones will start working again. 
Хобби
3 minutes to fix a problem I had for over 6 months! Just cleaned the contacts, pulled a bit the coils and back to pleasure! Great stuff and thanks a bunch!!!
Mate, your an absolute diamond! Just fixed my own JBL headphones and saved myself a good £40. Superstar!
My left side suddenly works when watching this video lol
YO SAME HERE imma save this video in case
So true 😂
me tooo it didn't work for the whole day and magically worked while watching this video 😂😂
Same bro
WTF!!! SAME THING HERE!!!
It's incredible how easy this fix is! Thank you for a really helpful tutorial with no wasted time.
You’re a genius, it took me 10 minutes to fix and one tip: you can pull those small coils to make them a little longer so that they can firmly touch those circular pads. It’s the only thing that helped me. Thanks again man. Now I can study in peace after being so irritated.❤️❤️❤️
tks , done it and now works again
I dropped my pair and the right side wouldn't work. I tried that with the coils and it worked! Thank you so much
Your comment and this video fixed it. Thanks dude!
I just did this, and now they work perfectly again!! Thank you so much
thank you!! my jbl tune 760nc headphones left side stopped working. i didn’t have anti-seize so i pulled out the springs a bit and now they work fine! only took like 3 minutes to fix because of you! seriously, thank you!
Started the video with 0 expectation of the solution actually working. You surprised me. Cheers mate
I just fixed the same JBL headphones. It was a special gift from my cousin when I was in Norway so it means a lot to me. I love you man !!
Hey man thanks for this video, i fixed my headphones ❤️❤️ i was little bit stressed out because it was gift from my sister these Chrismas
You are a life saver. My headphones have noise-cancelling but it broke on one side. Literally all I had to do was just push the ear-cup a little on the broken side so the springs could connect properly, they probably disconnected when it fell down or whatever. The uneven sound has had me bothered for months and now it's just gone in seconds.
I tried that out it worked perfectly, I thank you with EVERYTHING I was scared I broke it
Ditto! Great fix till I need to do a more invasive fix like this :)
lol I just did this and it worked thank you
Just did that!!!!! Thanks!! It works!!!!!! 💚💚
same. thank goodness. Didn't have to open the whole thing. Just had to press the broken side closer together 2 times @@ansifalisyed7817
Thank you man, You are a actual live saver....The case was on my right ear but I did same thing as you did to left ear without the anti-seize.And it worked, now my JBL 600BTNC works fine now thanks to you.
Indeed he is a genius. That's how I thought I almost lost an expensive headset to a bad ear until I saw this video. Thank you so much!
Thankyou for the very detailed on how to disassemble headphones. Works with my JBL 500bt, It worked even tho I didn't put any of the Anti Seize or Lubricant since I don't have any of those. I disassembled it and cleaned the two pads and tried to lossen the screws on the pads and it worked!. You earned a sub for saving my headphones. Cheers!
“Nos has salvado, estamos agradecidos!”
(You’ve saved us, we’re grateful!)
This was amazing. My JBL headset lost sound on the right side. I opened it up, cleaned the pads and gently pulled and extended those springs and hey-presto it fixed the issue. So so happy.
I didn't have any of the fancy equipment you did, so I just opened it up and blew on it and closed it and now it's working !!! Thank you!
Great video! Really helped a ton! What i had was smudges on those copper circles so i had to use an eraser just enough for the copper to be cleaned. Just be careful around the area when rubbing them.
Amazing! These things so often don't work but this was perfect! Thank you!
After watching this video and learning that it was the springs that provided the connection, all I had to do was gently pull the springs and extend them a little. Only those who have experienced it know how annoying it is to hear sound from only one earphone from time to time. Thanks for the video.
Amazing. I was just about to throw away my headphones. This video helped me fix it in a few minutes. I pulled the springs down a bit so they could make more contact.
This fixed the problem, even without the anti-seize. Thank you so much!
How
How did you do that?
I just held the springs in place and pulled the end a little bit so that the springs make contact again. I guess they just didn’t connect to the golden contacts properly in my case. Just be sure not to rip the springs out!
@@GuitarguyPaddy yea i found a way to make them contact and they work now thnx tho
@@GuitarguyPaddy Wow thank you this helped me fix mine!
Great video man! Simply opening up the left side and reattaching it did the trick for me.
Great video. Didn’t look like there was any dirt on the contacts, but went through the process, and headphones now work - Thanks.
Thank you very much for this fantastic video! Saved my headphones.
I just wanted to start and then it magically worked again. You're magic, dude😂
works like magic, I had this issue for a while and cleaning worked. Thanks for sharing this
Absolutely amazing tips!!!
You deserve 1M Likes. Thanks a lot, dude!!
Cheers from Brazil 🇧🇷
THANK YOU SO MUCH. I was going to buy another pair and didn't want to. They fell off my head on the floor and the left side wasn't giving much sound. I followed your video, and even though it looked a little different inside, it works now!! Very useful video! 5 stars!
Glad I could help! Thank you for your feedback 👍
Thanks a lot! I didn't even use the lubricant and it still worked for my tune 500bt. Just open it and make sure they are touching each other
THIS VIDEO IS A MIRACLE. I have watched so many videos but none of them worked. But this method worked like magic. thank youuuu
Glad to hearing was helpful 👍
Thank you for your feedback 🙂
ACTUAL MVP MAN, FIXED ALL MY HEADPHONES THE SPRING WERE JUST NOT TOUCHING CORRECTLY, THANK YOU ❤❤❤❤❤❤❤❤❤
This works like a charm. My little boy dropped my headphones many times, I already thought it was broken for sure. Great job!
It worked! All those years I thought I wasted my money for these. Thank you!
Thank you so much. I took apart the left headphone and cleaned the contacts with my screwdriver and flicked the two springs. Worked wonders
Thanks! This tip solved the problem for my JBL Tune 500BT as well. For the 500BT the only difference in the procedure is how you open it, because the cushion pads are not attached to a removable plastic piece, the rest is the same. As other people, I opted for making the springs a little longer so that they attach with more pressure to the circular plates on the board. I scraped the plates carefully with a small screw driver to remove corrosion as I didn't have any kind of liquid for the job.
How did you remove the cushion pads?
@@benoit9304 Just gently pull its edges off the slot. Once you pull one side, follow along the circle and it will come out easily. Pull the cloth only, don't try to remove any plastic piece during this process. Once you do it, you will see the screws you need to remove for this fix.
@@papertux thx!
Getting them back on was harder lol
what do you mean by making the springs longer? do i pull them so they strech a bit?
Did not have that lube you had, but cleaned where you did and also expanded those two feathers a little. (by pulling a little in them).
Put it back together and now it all works! Thanks!
Right side went out in my case but it still worked for me even without anti seize!!! Just SLIGHTLY stretched the 2 springs to ensure a connection thanks again
Thank you so much! Right side was not working and with some Isocol, fixed it right up. Saved me so much time.
Fixed my JBL Tune 500BT headphones!!!!!! Thanks a lot!
How??????
Just did this and cleaned the contacts and now it's working! Ty for this!
Glad to hear 👍. Thank you for your feedback!
Thanks man, it worked on my JBL 500BT, you have my like
Brother thank you so much, i was able to fix my headphone because of your video. great video, very clear and not too long and complicated
I have a cheaper set of headphones with no wire connecting. I put the screws back on and they worked right away! There seemed to be no issue when I looked. thanks very much.
YOU ARE A LIFESAVER. THANK YOU!! I have a 750BT and i wiped down those yellow circles and theyre working noW! looks like it was just dirty. you saved me 100 bucks.
Giving you love from South Africa. 9 months wasn't working. 3 minutes...I'm the man 😊
Worked perfectly, thank you very much.
As a side note, I recommend extending the springs by pulling on them gently, just to be sure. Other comenters have mentioned this and it seems like a good way to avoid future issues
you’re lifesaver bro. though i didn’t have anti-grease so i just used a little bit of vazeline instead and pulled on the wires a bit gently, now same as new. thank you
Thank you soo soo much...
It started working.,
I was in trouble form last few months, repair center says nothing left in it.. I repaired by my own i cant believe..
Huge love from India
I didn't even think it would be possible to repair my faulty headphones. But that was so easy! Just pulled the springs out a little bit. Now they are working perfectly again. (I have JBL Tune 500 BT. With them you have to remove the ear cushions to get access to the screws.)
How did you remove?
I have JBL tune 500 bt too.
Hey, you mean the ear cushions? You can just gently pull them off. They are a little tricky to get back on. But you'll manage with a little patience. ;) Good luck!
@@dob0970 omg it work!!! Thank you, you save my lifeeeee thank you so much!
@@khalilelbancol5401 Really glad I could help. :) Have a nice day and fun with your headphones.
Excelent video, i fixed mine in about 10 mins with these. I cleaned the connection point with a cotton swab damped in alcohol and it works like a charm
You make my week ... thank you
Pulled those two small coils a little bit and that helped to fix my problem. Thanks !
Thanks a lot!! I had this issue for quite a while, sometimes it worked, sometimes it didn't. But now, it should all work fine!! Thanks!!
You are a hero. Fixed the problem in three minutes!
Nice! Just worked for my Tune 700BT I got outta of a white elephant exchange! I also like a few others just cleaned out the pad with a little q-tip and alcohol. Then carefully, with wife tweezers pulled the 2 springs lightly to ensure they make solid contact. Thanks a lot!
It freaking worked, just opened it pulled those coils just a little bit and it works!!! Thank you so much!!!
You are amazing! I had a stuck button. Just by opening and one tick to the side and now it’s back working. Yay! Thank you
Awesome, glad to hear 👍. Thank you for your feedback!
This was very useful... I managed to fix the left side... The springs seemed too short and wasn't making contact. I stretched them and they work perfectly now! Thank you!
Glad to hear! Thank you for your feedback 👍
Thank you man, it helped me fix my headphones within few minutes.. back to my favorite songs :)
Fantastic video dude, thank you very much - such a quick simple fix for my favourite pair of headphones!
Glad to hear the video was helpful 👍. Thank you for your feedback!
Thank you for real! I stretched the springs in both sides and them the earphone worked perfectly!
This is why I love RUclips,just typed in how to fix headphones 2mins later sorted. Thanks
Thank you my friend, 50 seconds into the video and issue solved.
The brand on mine is not the same but thanks for showing me the way to open it. The magnets fell off my right earcup. Now that i put it back on its working. Thank you again!
great video , now the headphones work again , in my case it was the R side and it´s just the same . no anti seize , just scrubbed the contacts with a flat screwdriver and pulled the coils
worst part was to close it back
Thank you very very very much, be blessed ! Thanks to you my headphones worked again ❤️🔥
Bro you are a lifesaver. Have a blessed day, week, month and year !!!! Thank you
This worked amazing listening to the vid now with my 700bts love them thanks you saved my headphones 😁😁😁😁
Thanks man 🙌🏾didn’t even need too take out the padding I just pressed it down with the padding on hoping they would connect and they did in less then 3 sec, damm I was about to buy new headsets
one side of my headphones was dead, and it came back to life in the middle of the video, thanks bro
Solved My JBL 450bt. I was doing some workout the forces of gravity pushed it to the floor at imprecise velocity of m² then the right side of my headphones stopped works.
This video helped me. Now everything is working.
PS: I use rubber to clean that area because I hadn't the sintilizer...
dude thankssssssssss you saved from traveling without music
Exactly
Thanks so much man. I freaked out a little bit after my left side stopped working. Opened it up and cleaned the two plates with cleaning alcohol and it works again
Glad to hear 👍. Thank you for your feedback!
Great video.
This save my headphones.
Thank you for sharing.
Brilliant, works a charm! Thanks so much!
Many many thanks from India. It was really very helpful. Great Video.. I was about to buy a new one but you saved me.😀
Fantastic. Fixed the issue. Thanks a lot.
OMG this is crazyyyy....I've taken my brother's headphones and ...I don't know why the left one was not working properly ...i know he would kill meee...but this just saved my lifeee....thanks a lot!!!!
Damn it happened again ...and why is it always when " I " use them..whatever It helped me again ...thankyu so much!!
thanks for the video mate. fixed my headphones in 10 minutes after watching this.
You are life saver, because this is my brothers headphone thank you bro❤
thanks man u are great ,u saved a electronic that being hanging to me for 5 years
This helped me just now, my daughter always played with my headset and one side stopped working... after watching this and saw that she might've knocked something out, I just knocked it back in lol
Thanks man, was gonna buy a new pair of headphones, you just saved me £70 worth of headphones!❤
Thanks for help.
Great job.
I fixed my headphones in 10 min. after watching this video.
Just fixed my right one! Great vid! Thank you!
Glad to hear! Thank you for your feedback 👍
I didn’t have that magic glue stuff so I used a soldering iron, worked magic! Thanks so much, the wires for the right side weren’t connected!
Just Fixed my own headphones rn thanks a lot my brother 🤝
Thanks!! Very helpful video
Thank you for sharing this video, my
JBL headphones was playing up, the left side, after watching this my headphones working again. Both side. 😁
Thx for your video bro.
my headphone opened the side, but with your video I managed to fix it :)
Thanks man! All I had to do was open it up and it fixed the issue.
I didn't had to to all that I just pushed really hard on the center and it started working again lol. Thanks for the video
Took 5 min to fix.Great video!!
This just helped me. Thanks a lot
Danke sehr!
One thing: I always test my work before reassembling everything, just in case there's more to do.
Fixed the issue on my 700's too. Thank you!
Thank you so much! I fixed my headphones so easily with this
Awesome!!, just fixed mine using your instructions! :D:D
Excellent video !
Worked like a charm. Thank you sir
Worked like a charm. Thank you! 👍
Glad to hear. Thank you for your feedback 👍