So fun, bringing me back in time when the Atari ST first produced sounds or colors not thought possible by the designers. Thanks for that. So much talent !.
My friend, my congrats. You are amazing. Bless you for helping the less fortunate from the wallet and the curious with tech. This is very good stuff!!! Super!
iya, saya juga berpikir demikian, ada juga orang indo yang bikin ginian... akhirnya... salam kenal mas, saya baru belajar mohon bimbingan nya@@glakglikgluk2993
Good afternoon, can you please tell me what the time code looks like for the tempo to add a CV input to pin 14 to this device? I would be very grateful if you could write it in the comments so that I can insert it into the sketch
@@glakglikgluk2993 I'm testing the display with the right (it should be right...) constructor for my display, but no sign of life...I tested it also with the examples of the library but it doesn't work, while using Adafruit's library it works properly. Any idea?
@@glakglikgluk2993 I know. Apparently, it can be used also with I2C. The main problem is that my ESP32 cards (both ESP32-WROOM-32D and ESP32-DEVKIT-V1) crashes and continuosly reboot, also with your code with no modifications. This is due to the conflict between drivers in Mozzi. It says that some functions use legacy ADC drivers, while some others use the new one, and this is so bad it just won't work. Any idea? I looked everywhere but nothing really worked for me...
@@glakglikgluk2993Thank you very much for your answer, but I don’t understand much about coding, could you post this code here in the comments so that I can add it to pin 14, for example?
@YuujiBnX You can't save it in external memory because this is a wav sound program that has been converted to code. if you want to change the sound you can visit the mozzi library site.
@@glakglikgluk2993I applied a trigger signal to pin 14 and nothing happened, tell me, maybe I’m doing something wrong? Thank you very much in advance!!!;)
So fun, bringing me back in time when the Atari ST first produced sounds or colors not thought possible by the designers. Thanks for that.
So much talent !.
My friend, my congrats. You are amazing. Bless you for helping the less fortunate from the wallet and the curious with tech. This is very good stuff!!! Super!
An inexpensive DIY drum and bass synth is really missing in the world. I would by it or build it.
this is a homemade synth for a lesson on how to use a sequencer to create music
Congratulations, wonderful! Is there any update to have a clock in volca style? Excuse my English and greetings from Chile
You can sync to Volca with a mono patch cable via sync in on Volca
genius
makasih kerennnnn !!!
Ada juga org indo yg nongol
iya, saya juga berpikir demikian, ada juga orang indo yang bikin ginian... akhirnya... salam kenal mas, saya baru belajar mohon bimbingan nya@@glakglikgluk2993
Good afternoon, can you please tell me what the time code looks like for the tempo to add a CV input to pin 14 to this device? I would be very grateful if you could write it in the comments so that I can insert it into the sketch
So awesome. Keep going!
wow
Nice work dude!!!
Hi! Great job!! I just bought all the material to try it! I just made a mistake with the display: will it work with the 5pins version anyway?
The 7 pin OLED ssd1306 uses SPI lines instead of I2C.
@@glakglikgluk2993 and can it be adapted or no chance it will work on ESP32?
@@glakglikgluk2993 I'm testing the display with the right (it should be right...) constructor for my display, but no sign of life...I tested it also with the examples of the library but it doesn't work, while using Adafruit's library it works properly. Any idea?
This code uses the u8g2 library @eugeniogatto4095
@@glakglikgluk2993 I know. Apparently, it can be used also with I2C. The main problem is that my ESP32 cards (both ESP32-WROOM-32D and ESP32-DEVKIT-V1) crashes and continuosly reboot, also with your code with no modifications. This is due to the conflict between drivers in Mozzi. It says that some functions use legacy ADC drivers, while some others use the new one, and this is so bad it just won't work. Any idea? I looked everywhere but nothing really worked for me...
Excellent!
heheh coool! nice idea
Will anyone have the complete file?
Does anyone know how to add a CV input to this device to control the tempo of the drums?
You must add a millis time code as a trigger tempo setting on the pin if there is an empty pin
@@glakglikgluk2993Thank you very much for your answer, but I don’t understand much about coding, could you post this code here in the comments so that I can add it to pin 14, for example?
but I don’t understand much about coding, could you post this code here in the comments so that I can add it to pin 14, for example?
Do you have plans to build the right one? I dont find in your videos.
You just follow the schematic in the folder and upload it, I didn't make a video of the soldering because the video is long.
@@glakglikgluk2993 Thank you for the answer. I was meaning to the right One with the LED's matrix.
Looks like a Meebleeps Mutant Mozzi. Google it. 😃👍
Wonderfull thx!
Can i add a Shield sd to change the sample on live ? Or i need to learn some multiplexer ? To make Space for it ?
@YuujiBnX You can't save it in external memory because this is a wav sound program that has been converted to code. if you want to change the sound you can visit the mozzi library site.
просто супер .
Awesome
can you tell me the model of oled you used.
m.id.aliexpress.com/item/32860271991.html?gatewayAdapt=Pc2Msite
Good afternoon, tell me how to add a CV entry to them, thanks in advance;)
There are no analog pins remaining if CV is used
Well then, at least from the sync output, make a sync input, is this possible? It’s very necessary, I’ll be grateful if you tell me how!!!
If you want media sync input, you can make a 3V trigger circuit on the start switch because that pin is a pulldown
Thank you very much, can you show me schematically how to do this? What to add and where?😊
@@glakglikgluk2993I applied a trigger signal to pin 14 and nothing happened, tell me, maybe I’m doing something wrong? Thank you very much in advance!!!;)
Request Sir , Can you Make A Guitar Effect Pedal with Arduino UNO vs ESP32 wich one is Better ?
Fungsinya apa ? Ini hanya sebuah micro controller
keren banget! bikin enclosurenya gimana ya?
Bisa beli di toko komponen elektronik banyak kok box plastik seperti itu dan murah
@@glakglikgluk2993 ohh. kalo ngelubanginnya gimana itu? terutama yang kotak soalnya keliatan rapi dan presisi bangett😄 pake laser / cnc kah? atau manual?
Pake mesin scrollsaw mase atau gergaji ukir
@@glakglikgluk2993 owalah wokeeh pak makasi infonya. keren bgt bikinnya joss 😁👍
Ini brp om kalo bikin
tokopedia.link/iAN4ixBPFxb
Keep grinding! Increase your engagement easily --> p̲r̲o̲m̲o̲s̲m̲!