Making a Long Range Remote Control. DIY 1 to 8-Channel Arduino RC PART-1
HTML-код
- Опубликовано: 2 окт 2024
- How to make a long range remote control with 100mW NRF24L01 PA LN (E01-ML01DP5) module and Arduino. 1 to 6 proportional channels and 2 on/off type channels. Circuit construction with a total of 8 channels.
Necessary materials:
2 x 100mW NRF24L01 PA LN (E01-ML01DP5) : s.click.aliexp...
2 x Arduino Nano: s.click.aliexp...
2 x NRF24 wireless 3.3V adaptor: s.click.aliexp...
2 x 100uF capacitor: s.click.aliexp...
4 x Female Header Pin (15 pins): s.click.aliexp...
1 x 10K potantiometer: s.click.aliexp...
Universal PCB Board: s.click.aliexp...
AA Battery Box 6 slot (For 6 AA Cells) : s.click.aliexp...
or 18650 Battery Box : s.click.aliexp...
Heat-Shrink: s.click.aliexp...
26AWG cable: s.click.aliexp...
90W Digital Adjustable Temperature Electric Soldering Iron:: www.banggood.c...
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
DIAGRAMS & CODES: www.rcpano.net...
My Website (KendinYap): www.rcpano.net
#DiyRC #DiyArduinoRC
Thank you for watching. Please Share, Like and Subscribe for More Amazing Videos.
All of my videos : bit.ly/2Z9QVYK
Yeah! YES! KendipYap wakes up from heaven. I'm here to watch your incredible experiments. Thanks sooo much
can you make a transmitter with disply
Ofc i don’t think it would be that hard
Ellerinenize sağlık çok güzel bir proje bir sonraki videoyu sabırsızlıkla bekliyorum
Şimdiden kolay gelsin
ما شاء الله تبارك الله
Great stuff and great channel.
Keep it up and may Allah bless you.
I'll subscribe and dig more into your channel videos.
let me say something in turkish: cuk cuk guzel 🙃
Eline sağlık Üstad 2. bölümü merakla bekliyoruz.
Finally Kendinyap is back😍 great masterpiece as usual,i never expected anything less,waiting for part 2...Please keep on making videos regularly no matter how short it is,this deserves more than a million subscribers❤
Can you make a budget drone using that DIY Remote control 🥺
Yes
Please make dron from esp8266, thanks
Yes please make a don't please please please I request you please make budget drone for us with this remote controller 🎮
Thank you!
I just got the module i would be testing it in my controller soon. Thanks for the vidéo
Abi insansız hava aracı teknolojisi ve operatörlüğü öğrencisiyim Allah razı olsun emeğine sağlık çok teşekkür ederiz yaptığın projeler için gerçekten çok işimize yarıyor.
grande progetto, molto interessante
Spec for E01-ML01DP5 is 2.5km range using a 5dbi antenna. Looking forward for range test in part 2. 👍
Very nice indeed!! Well done and thank you.
Making a Long Range Remote Control. DIY 1 to 8 Channel Arduino RC + joystick bro help very cool video
Kardeşim helal olsun. bütün kitlen yabancı olmuş ama olsun
Reis 23 ekimde hezarfendeki etkinliğe katılacak mısın seninle tanışmak isterim
I am curious about the range. I have written working code for ESP32-S2 transmitter and ESP32-C3 receiver 6 channel with I2C displays on both and accelerometer and GPS connections to the remote, also some neopixel driving. Transmitter uses mini joysticks and 2 encoders. My target is radio controlled solar powered hydrofoils. However I think I will need to switch out for another ESP32 chip with the aerial connections. My code is working, I made circuit boards but the mini PCB aerials only range to about 200 M even in ESP32 NOW Long range mode. I will explore further though, may be something simple like manually slowing the communication rate. Interesting seeing your skill on perf board soldering! PCBs from China are very inexpensive now though. I have been getting some this year from JLCPCB and can recommend.
200m is typical for PCB antenna. Install 2dbi dipoles on transmitter and receiver, and you will have 1.5km range.
Her şeyi doğru yaptığıma eminim defalarca kontrol ettim fakat alıcıyı ne zaman bataryaya bağlasam benim komutum dışımda otomatik çalışmaya başlıyor. Verici ile kontrol edemiyorum hiçbir türlü. Sizce sorun nedir
Very nice 👍
I tried 2-3 times by following you. Can you help me complete this rc transmitter and receiver.
Or else can you please make a Rc transmitter and receiver I will pay the amount of components
2. Bölümü sabırsızlıkla bekliuoruz
Hocam ne yaptıysam yapayım alıcı mesajı almıyor. Bunu nasıl çözebilirim. Paralel olarak 100uF ve 100nF bağladım. ESP32 kullanıyorum.
Çözdüm sırf laptop üzerinde duruyor diye konuşmuyormuş. Böyle ıvır zıvır hata ile neden karşılaşıyorum ?
Motor süreceğim elektromanyetik alandan bu kadar kolay etkilenmemeli.
This a excellent built. I would like to make a remote control for an electric skateboard. Could I use this design or is there something need to be added to have a brake function? I am using and 800w brushed motor with its esc.
I want to make my personal watercraft completely remote control
Can you help me with the components?
Es excelente, increíble y muy interesante ver tus videos , ojalá puedas subir más videos más seguido🎉💯
Vlw meu amigo muito obrigado 👏👏👏
Nrf24 ve ve CSS 7,8 ile çalışırken 9,10 pinleri ile çalıştıramiyorum. Siz nasıl calistirabiliyorsuniz
Help me i want put 6 leds on a receptor like a traffic lights but 1 botton with a lcd on transmitter but the circuit is like this
Those modules only output 100mw, the same as a standard Rc transmitter. Ebyte, the company who makes that module make a 1w 433mhz module (Ebyte E32-Ttl-1W) which is used in the QCZEK diy long range system and people are getting in excess of 45 miles (73Km) out of the system.
The modules could be integrated into a diy project like this, either with the stock firmware or the QCZEC custom firmware on them.....
İşte bu ya aradığım sonunda
hey KendinYap I wanted to tell if you can show us how to create an automatic school bell
Thogle swich ile ilgili sanırım bir hata veriyor kod yüklenirken...
Üstadım her videonda farklı bir sorum oluyor,bunuda cevaplarsan sevinirim.elimde 1 arduino uno var onuda değerlendirmek istiyorum,ebat olarak biraz büyük ama kumanda içine unoyu koysam değerlendirsem olurmu herhangi bir sorunla karşılaşırmıyım,voltaj,kodlama v.s..
Kullanabilirsiniz. Tek fark pin numaraları olacaktır. Arduino nano ile Uno nun pin şemalarından karşılaştırarak pin numaralarını kod üzerinde değiştirirseniz sorun kalmaz.
@@Kendin-Yap teşekkürler
Buna altimetre modülü ve oled 1306 magju ve voltmetre ekleyebilir misiniz?
Tam olarak yapmak istediğim fakat bir türlü zaman bulamayıp aklımın köşesinde duran ne varsa hepsi bu kanalda umarım videoalrnın devamı gelir.
I just wondering, how about capacitor voltage? 100uF and 25V is enough?
Can I use nrf24l01 pa module instead of E01-ml01dp5, in same this circuit, because E01-ml01dp5 is very expensive please help kindly request to you😭💗🤌🏻
Can I use nrf24l01 pa module instead of E01-ml01dp5, in same this circuit, because E01-ml01dp5 is very expensive please help kindly request to you😭💗🤌🏻
Can I use nrf24l01 pa module instead of E01-ml01dp5, in same this circuit, because E01-ml01dp5 is very expensive please help kindly request to you😭💗🤌🏻
Can I use nrf24l01 pa module instead of E01-ml01dp5, in same this circuit, because E01-ml01dp5 is very expensive please help kindly request to you😭💗🤌🏻
Can I use nrf24l01 pa module instead of E01-ml01dp5, in same this circuit, because E01-ml01dp5 is very expensive please help kindly request to you😭💗🤌🏻
Can it work on esp32 camera i mean with this distance it is possible to transmit and receive image?
Diğer bölümleri de merakla bekliyoruz
Very cool project! I'm still looking for something similar that can be run using a phone app (if at all possible). Maybe through telegram
Az bi değişiklikle motorlu çanak antenime yapabilirim
Range test?
As I mentioned at the end of the video... distance test will be done in Part-2 video.
Can u tell the code for programming the aurdino
Üstad B2 tarzında bir uçak yapsana :)
HELP ME make with 14 channels like this video plis
Please continue part 2🙏🏻
soon
I have already installed nrf all library, and proprer connection and not work
Can u make a drone using same radio controller
Hi I have Arduino Uno with 3 pins connected to Max7219 with 7-segmentLED. How is it possible to send data to another 4 Arduino Uno using NRF24L01 so I will have exactly the same displays on all my 7-segment LEDs. Thank you
Can the transmitter be used for receivers that are sold in the market, such as using a multiprotocol module
abi merhabe ben seni uzun süredir takip ediyorum ve videolarını sever izliyorum abi sana bi sorum olacak be rc uçak modellerine başlamak istiyorum ama ögrenci oldugum için bana çok pahalıya denk geliyo bana önerebilecegin bir kumanda seti motor bervane gibi veya esc servo motor gibi uygun viyatlı bir kit veya ürünler önerebilirmisin ve uçak modelinde benim için en uygun model ne olabilir bununla ilgili bana bir mesaj yada video çekebilirmisin
Flysky FS-T4B gibi 4 kanallı analog bir kumanda, 2112 fırçasız motor, 30A esc. Bu isimler ile artırsan çeşitli satış yerlerini bulabilirsin. Piyasada fiyatlar ve stok durumları değişken olduğu için direk şuradan şuna al diyemiyorum. Bu malzemeleri bir çok model uçak tipinde kullanman mümkündür.
very nice...
please add lcd or oled in this radio for showing channels
FARKLI BİR UYGULAMADA kısa mesafe olarak kullanacagım nrf24l01 küçük wireless modül kullansam kodda değişiklik gerekir mi?
Tüm NRF24 modülleri için aynı kodu kullanabilirsiniz.
Can I use nrf24l01 pa module instead of E01-ml01dp5, in same this circuit, because E01-ml01dp5 is very expensive please help kindly request to you😭💗🤌🏻
Ben Gürcistanlıyım ve size yazmak için bir tercüman kullanıyorum. Ülkenizde olan hikayeyi paylaşıyorum. Ben de Arduino Nano'dan başka bir şey kullanabilir miyim dedim.
Normal nrf24l01l kullanmak sadece menzilimi kısaltır
Menzili kısaltır ama tek farkı bu değil. Bu versiyonun devre kısmı metal kasa içerisindedir. Bu elektriksel gürültüden daha az etkilenmesi için filtre görevi yapıyor. Ve NRF24 modüllerinin bağlantı sorunlarını azaltıyor.
Any range test for the remote?
As I mentioned at the end of the video... distance test will be done in Part-2 video.
oh boy, waiting for part 2, do you need extra power supply to servos, Im waiting to see flying.
If the ESC is connected, no extra power supply is required for the servos. Because the BEC circuit of the ESC will provide the necessary power for the servos.
i want to make with 30 leds and 16 on/off switchs luke this video plis can help me because i want to make the 14 segments display but in transmitter is with 16 switchs 2 is the circuit in and off and the switch is with 1 led on left side of switch
SOMEBODY loves China!!!😱🙄
May i know which one nrf library that u use for this project sir?
The lines starting with the "#include" command at the top of the code call the library files to be included. An example; #include , meaning the SPI.h library will be called. All library files in these lines are the required ones. You need to install them on your computer for the code to work.
in this project SPI.h / nRF24L01.h / RF24.h / Servo.h
Teşekkürler ✌️
1CH Receiver (RX) Alıcı nasıl Gyro ekleye bilirim yardımcı olur musunuz!
Please make drone using this
Cool remote control
Sir please explain what you are doing , instead of background music , please explain the schematic you have designed
Can we use simple Nrf24l01 module instead of Nrf24l01(E01-ML01DP5)
Yes you can
Am I only one wanting to know the distance it works?
Great work 💖, waiting for part 2 🇱🇰🇱🇰
Can I use nrf24l01 pa module instead of E01-ml01dp5, in same this circuit, because E01-ml01dp5 is very expensive please help kindly request to you😭💗🤌🏻 please please help me sir
What is the voltage of the 100uf capacitor
16V +
i have 2 x rfx2402e module from wltoys v666-ufo, but i try with nrf library not working, is there any other library? can you help me for my case?
My module name is RFX2402E
Hello, can I use e01-2g4m27d which has a range of 5 km and a power of 500 mw instead of e01-ml01dp5
Yes you can. But the supply power of the NRF24 module must be external. It cannot get the current it needs through the Arduino.
Thank you
merhaba kodlara bakmak istedim paylaştığınız linkten ama alıcı ve verici kodları aynı olmuş, düzeltebilir misiniz?
Bilgilendirme için teşekkürler. Düzelttim.
Good video!
But crappy music!
Sir,,, make an 10 channel transmitter with 5-10 km range. 10 channel receiver and disply
Can you make a receiver and transmitter to make a drone?
I would love to see 3d printed versions of your past rc plane builds
weeks of printing, seconds of crashing 🤣
Good job !!
I am requesting you Sir, please describe how to add MPU 6050 (gyro, accelero) component for stability for the same setup 🙏.
And as you have used tge esc to give power to the motor can i directly attach it with 3 v so tgat i can test it with servo motor. As i dont have an esc rn
Hi! so, I watched many times, I bought all the parts, and had a change of heart. I want to build a robot. Basically, a tank, 2 tracks 2 joysticks, and an arm with grabber/claw controlled by a second set of joy sticks. sounds like I would need to control a total of 6 to 9 stepper motors.......little guys for now, maybe 28byj-48s and a couple bigger ones for the tracks. my question is can this be configured to control those?
also,ISTLs ?
I need you to help me, may God protect you
از شما ممنونم
Hello how is possible to connect wirelessly the pins of MAX7219 (CLK, CS, DIN) to Arduino pins? So that there's no more physical wires that connects between MAX7219 and Arduino. Thank you.
Can i use any channel for any use
How far dose this work
Merhaba uzak menzilli uzaktan kumandayı kameralı(ekranı kumandaya yansıtan) yapma ile kamerayı nasıl herhangi projemizin neresine bağlantıları yapmak gerekir 2 tane sorum oldu cevaplarsanız sevinirim
Wow. I've been waiting for this. Thanks.
Can I use nrf24l01 pa module instead of E01-ml01dp5, in same this circuit, because E01-ml01dp5 is very expensive please help kindly request to you😭💗🤌🏻
why do you need a wireless adapter module if you've already got the wireless transceiver couldn't you just connect it directly to the arduino?
The adapter's job is only to reduce the voltage. NRF24 modules provide communication. The adapter supplies the NRF24 module with stable and correct voltage. It is a simple regulator. The WiFi name is misleading. But it is sold under this name.
Can I use nrf24l01 pa module instead of E01-ml01dp5, in same this circuit, because E01-ml01dp5 is very expensive please help kindly request to you😭💗🤌🏻
Ben de bu işleri öğrenmek istiyorum üstat nereden başlamak lazım
I cant find your nrf module on amazon its diffrent on amazon..😓😓😓😫😫😫.
Can you please make a transmitter and receiver with esp32 boards.
What is the maximum range for this module system ? And can it be used to control a Quadro copter drone ?
I have a project about This RC and Drone. If it works well I will publish it in the future. The maximum range test is in the second part of the video... ruclips.net/video/RSDfMaanKXM/видео.html