Made this, and tested it in a game yesterday. Absolutely. Beautiful. You can use paint grenades and paint bundles and still get about 120 feet. Thanks Kipkay!
It's really cool, but I have a few problems with it. One, the link in the description doesn't take you directly to this project and instead you have to scroll through thousands of projects to find this one. If you expect to be more popular, put direct links so people don't have to waste time on that. Two, the website doesn't have the full instructions like the description says. When you actually do find the project, it says the exact same things in the description of the videos. Three, there's no material list and no link to the Co2 adapter. If you can't find the adapter, you can't make it. Same with the materials. You need the exact parts to make it. How are we expected to make it if we don't know what it's made of? Thank you and please, next time, give us a complete parts list so we know what to buy.
Jihad Joe Ah, thanks. The original comment was from a while ago, I have since emailed Kipkay asking him to fix it, and I never checked back in to see if it had been fixed.
If you make this like i did, make sure to over do the teflon tape because I didn't and it leaked all the CO2 out. So to fix this I put it under water (filled up the tub) then screwed in the CO2 addapter (with new 12 gram CO2 loaded in it). I did this to be able to see where the leak was. I then unscrewed the piping where the leak was (not the pvc) and then used the black silicon stuff on the leak and all the other pipe parts. I left the teflon on and put the silicon over it. This worked alot better. So I suggest using it in the first place. Also I found potatoes as a better shot and using something to push it down with (like the end of a LAX stick).
I have a homemade paintball mortar that uses 180 milligrams of gunpowder, homemade paintball canisters, and if need be, can fire actual mortar rounds provided they fit. Lets just say, you see my at a paintball game, you better have some decent padding. Cause my homemade painball mortar is spot on accurate. If i can see it, i can shoot it.
Rhidongo There would be a great amount of loss each time you fire the launcher. One of those 18oz disposables would not be as economical as a box of 12 grams. Opening the ball valve to fire would yield a shot and then a continuous splooogze of Co2 until you close that valve. The mechanism needed to fix this starts adding vastly increased cost to the build and is exactly why a Metadyne launcher costs about $300 bucks.
It's hard to overstate my satisfaction. Aperture Science We do what we must because we can. For the good of all of us. Except the ones who are dead. But there's no sense crying over every mistake. You just keep on trying till you run out of cake. And the Science gets done. And you make a neat gun. For the people who are still alive. I'm not even angry. I'm being so sincere right now. Even though you broke my heart. And killed me. And tore me to pieces. (Continue)
went to your website and couldn't find the ''detailed instructions'' on your site. can you please help me with the measurement of everything but the co2 adapter please
Instead of drilling into the PVC and screwing the entire assembly in, use a 1/2" thread to 2" slip adapter. I can find them at Lowe's or Ace. Yes this requires another elbow, but it is 10 times as sturdy. I found that this works much better in the long run, and only costs a few dollars more. Also, the more volume in the pipe (before the valve), the more power your shot will be.
Thanks KipKay! We loaded up a molotov in this baby and it worked like charm! Those cops never knew what hit 'em! ..I'm kidding of course.. In the end, they knew what hit them.. No, but seriously we used this to shoot homebuilt explosives into old moldy shacks and what-not. Don't worry, me and my co-worker are trained professionals. Cool design. I'll let you know if I find a way to make the projectiles have more velocity and range.
If I still paintballed, I would so make this, hide it under a coat, pull it out in the middle of a field game, and watch the opponents expression as he see's a wall of paintballs coming his way.
hi you can get up to 2 shots per a canister, if your quick enough to shut the valve again, or if you'd like more shots you can adapt this design to fit onto a co2 fire extinguisher where you will have excess amounts of shots
Use spring to push out the projectile. Not compressed air. Put strong spring in the tube, load spring, put the projectile in, release the spring and the spring will push away the projecile like crossbow. The spring will not compress air but push the projectile directly.
I wouldn't recommend making the paintball gun adapter shown at the end of your video. There is nothing to regulate the fps and firing paintballs at people like that could hurt someone. Imagine if it fired hard enough to blow a paintball through a visor? Most fields require us to clock our fps when we check in. The rocket or mortar is safer provided it's not aimed directly at someone. Cheers.
I'm sure you could, with a nice paintball barrel attached and a Tiberius Arms First Strike Paintball Round..Attach a scope, a stock, and some sort of forestock..BAM sniper rifle..however using a ball valve would have a kinda hard, awkward trigger pull and that could mess up your shot. Its better as a bazooka or a shotgunblast.
@kipkay I'm curiosity, why is the middle pipe needed? Couldn't you use a adapter between the ball valve and the CO2 adapter? Could it be because the threaded adapter part is to long? Maybe it could be cut with an angle grinder to fit without the pipe... 🤔 Anyways, great project! I'm building my own with a solenoid as a trigger.
@vu284 He did, kinda. His Hi Powered Nerf gun was essentially a very low impact potato gun (in that it used an ignition spark and spray fuel to launch nerf balls). As for this project, its really cool. I have a interesting thought though: could you modify it so that instead of the ball valve you used an electric sprinkler valve, that way you can shut off without risking losing all your pressure at once.
I never build enything you make kipkay cos it's all to good for me ( as I am 13) But this video is amazing and will be a weekend project for me and my dad thanks very much !!!
Yea, attach a string to the pin and the other end to the top of the gun and when it shoots out it will pull the pin and the grande will go. Or you can do it the other way around :P
Im getting into lasers and have been subbed for a while and I had 2 questions. 1. Is it absolute required for me to get laser glasses or goggles, if so where do I get them. 2. Where could I get a cheap laser that will burn firework wicks and maybe other things. thanks so much!
it doesn't really matter i believe, as i use the Nerf pocket howler with the whistle removed, and you can only just about wedge it in the barrel and it go's about 450ft
Made this, and tested it in a game yesterday. Absolutely. Beautiful. You can use paint grenades and paint bundles and still get about 120 feet. Thanks Kipkay!
It's refreshing to see a youtuber who actually makes good, informative content. Thanks!
Kipkay
for president
Ahh... just the perfect weapon for Splatoon..
Word war paintball
u play it too??
where did he get invisible spray?
BaBy Ace
I swear I hear him saying PBC pipe.
peanut butter and celery pipe?
dude agree with you
Me to
SuperPersianLord
Papa Smurf he is
are you using one WHOLE cO2 cartridge per shot???
Yep
@@barbthemage5139 ur 8.5 yrs too late......
Pretty sure you could refill them actually
@@falsehashtags6581 Not the ones he showed.
It's really cool, but I have a few problems with it. One, the link in the description doesn't take you directly to this project and instead you have to scroll through thousands of projects to find this one. If you expect to be more popular, put direct links so people don't have to waste time on that. Two, the website doesn't have the full instructions like the description says. When you actually do find the project, it says the exact same things in the description of the videos. Three, there's no material list and no link to the Co2 adapter. If you can't find the adapter, you can't make it. Same with the materials. You need the exact parts to make it. How are we expected to make it if we don't know what it's made of? Thank you and please, next time, give us a complete parts list so we know what to buy.
He did you moron
Joel Plugge Who are you talking to?
Jihad Joe Ah, thanks. The original comment was from a while ago, I have since emailed Kipkay asking him to fix it, and I never checked back in to see if it had been fixed.
TheTriforceCrusader No prob
I remember watching this as a kid lol
most fun i had with my dad in a long time
O_O..... Where do I even begin on how awesome this is! :D
NOWHERE!!!! It's not possible ._.
Wolf Bronie Exactly.
If you make this like i did, make sure to over do the teflon tape because I didn't and it leaked all the CO2 out. So to fix this I put it under water (filled up the tub) then screwed in the CO2 addapter (with new 12 gram CO2 loaded in it). I did this to be able to see where the leak was. I then unscrewed the piping where the leak was (not the pvc) and then used the black silicon stuff on the leak and all the other pipe parts. I left the teflon on and put the silicon over it. This worked alot better. So I suggest using it in the first place. Also I found potatoes as a better shot and using something to push it down with (like the end of a LAX stick).
Where did you find the parts List please (asking for a friend)
put a shell mortar in (fireworks)...
I like the smoke effect.
*Neighbor on other side of the block gets nerfball on his head*
-Neighbor: KIPKAAAAAAAYYYYYYY!!!!!
-Kipkay: Shazam!
Hey! Look! ^ My name has LAW in it! LOL
Get out of RUclips. We don't need laws. We're pure! (No offence.)
XD
Nathaniel Light Anti-Armor Weapon ence
Hey I have a friend named Ariel Angel!
I think its more like a mortar :)
I have a homemade paintball mortar that uses 180 milligrams of gunpowder, homemade paintball canisters, and if need be, can fire actual mortar rounds provided they fit. Lets just say, you see my at a paintball game, you better have some decent padding. Cause my homemade painball mortar is spot on accurate. If i can see it, i can shoot it.
And that's why your a virgin. The more you know.
Ain't nobody beating my two rocket launchers and work in progress anti aircraft mortar!
Ain't no one gonna beat me and my All American Potato launcher. Y'all with yer fancy schmancy rocket launchers can't beat getting a spud to the face
Just made one!!! Kipkay you are the best!!! Menards is truly fun to shop at!!!
The ending where he shot paintballs at screen would look very awesome in 3D
you should show the people who disliked this "How to get your head caught in a grease fryer!!
Or a furnace.... a chimney is fine too >.>
but it uses one tin of co2 per shot right
You could use a bit of brainpower, and intuition, and make a thread adaption for an 18oz Co2 tank (Like in normal paintball guns) for rather cheap.
I would if I could buy any adaptors over here. If I knew how to make one, I would, though.
Rhidongo There would be a great amount of loss each time you fire the launcher.
One of those 18oz disposables would not be as economical as a box of 12 grams.
Opening the ball valve to fire would yield a shot and then a continuous splooogze of Co2 until you close that valve.
The mechanism needed to fix this starts adding vastly increased cost to the build and is exactly why a Metadyne launcher costs about $300 bucks.
Just attach a bike pump plug, and glue the pump to the side so you can always be shooting
That would turn this project into a deadly bomb co2 can go to 3000psi plus, that pipe is rated for about 220 psi
A weapon to surpass metal gear....
thanks kipkay!
i used it in an actual paintball arena and they gave me free paintballs
thanks
It's hard to overstate my satisfaction.
Aperture Science
We do what we must
because we can.
For the good of all of us.
Except the ones who are dead.
But there's no sense crying over every mistake.
You just keep on trying till you run out of cake.
And the Science gets done.
And you make a neat gun.
For the people who are still alive.
I'm not even angry.
I'm being so sincere right now.
Even though you broke my heart.
And killed me.
And tore me to pieces.
(Continue)
I'm guessing the 1 piece that won't be at the hardware store is the nerf football
I found a small basket of soccer balls at my local Ace Hardware once...
BlueberryBoi I used to buy comics at a mom & pop hardware store years back. Some people will sell whatever they want xD
Title : Paintball
Ammo : Nerf Football
Watch the video
You can make grapplin hook gun from this
give that man a cookie
+aaron evans omfg xD
Kipkay + election = new predesent
This is (was) one of his best videos!!
went to your website and couldn't find the ''detailed instructions'' on your site. can you please help me with the measurement of everything but the co2 adapter please
Same problem
same bro
Cant you use a bike tyre valve instead
Yeh you could and you could power it with a tyre inflator. Greek gadget guru does something like this in previous videos
mod it to shoot water balloons.
It would just pop while it's in the chamber
Jfamrox Julius ya, i said MOD it, like make a system o cushion it.
Peice of cylindrical polystyrein that goes before the paintballs. Easy!
Condom water ballon so it won't pop that eze
FlamerGamerHD or just put styrofoam like that intel... turtle said
p.s. sorry if i spelled styrofoam wrong
that moment when you relize youve spent three hours watching kipkay vidoes
Loaded this thing with 21 Nerf streamlines and is a crazy crowd control during games.
Kipkay where is your wife throughout all this
Honestly, the thing that interested me the most in this whole video, was the leaf template. I'm so doing that.
When the zombie apocalypse breaks out, you're on my side KipKay..
my stomach turns at the thought of getting hit by that many paintballs, with uncontrolled velocity, all at once. I have to make one.
Lol, never a dull day when watching some kipkay vids! ;)
Thanks Kipkay! I have a crap load of unused paintballs in a paintball tube all in tact! Can't wait until my dad gets all the conponents!
The plasma cutter was something... BUT THIS IS JUST PWNAGE!
i freaking love the leaf template
I've never done anything cool like that. That is awesome!
Nobody is going to survive robbing this guys house with all the gadgets he has....
I'm not going to shoot anything, but I might use it as an airblast machine! That would totally annoy my friends.
very cool and something to shoot at your friend who claims he has the "Balls of Steel"
It's hard to overstate my satisfaction.
(CONTINUE OR CAVE JOHNSON WILL BURN YOUR HOUSE DOWN WITH COMBUSTIBLE LEMONS.)
i finished mine today. Firt i gonna test it without an football and rapped in a towel. Thanks, Kipkay!!!
So its also a mortar? Epic.
Instead of drilling into the PVC and screwing the entire assembly in, use a 1/2" thread to 2" slip adapter. I can find them at Lowe's or Ace. Yes this requires another elbow, but it is 10 times as sturdy. I found that this works much better in the long run, and only costs a few dollars more.
Also, the more volume in the pipe (before the valve), the more power your shot will be.
this is one day before my BDAY OMG
AWESOME I will use the bang alarm and the launcher in my next war
Feels more like a portable mortar than a rocket launcher. Still, cool!
You would be awesome in mythbusters!!
DAMNIT IT KIPKAY! I NEED TO SLEEP!
Paintballs. The new fun way to tie-dye a shirt.
I think this is a better design for a confetti cannon than your actual confetti cannon design
this dude modded everything in his house it seems like... i mean everytime i watch a video he opens something up and makes it 2x better
Guy with paintball gun: your so dead
You around the corner: oh, hello.
Thanks KipKay!
We loaded up a molotov in this baby and it worked like charm! Those cops never knew what hit 'em!
..I'm kidding of course..
In the end, they knew what hit them..
No, but seriously we used this to shoot homebuilt explosives into old moldy shacks and what-not. Don't worry, me and my co-worker are trained professionals. Cool design. I'll let you know if I find a way to make the projectiles have more velocity and range.
Looks like this is
*puts on sunglasses*
Against the LAW
YYEEEEEEEEAAAAAAAAHHHHH!
If I still paintballed, I would so make this, hide it under a coat, pull it out in the middle of a field game, and watch the opponents expression as he see's a wall of paintballs coming his way.
i flinched when he shot the paintball at the camera
This Launcher Is Awesome
i like the shoot sound!
this turned the tide in my painball competition
this would be great for a paintball scenario game
i still watch these when i cant even get like a penny to make one :P
that wal mart connection
hi you can get up to 2 shots per a canister, if your quick enough to shut the valve again, or if you'd like more shots you can adapt this design to fit onto a co2 fire extinguisher where you will have excess amounts of shots
Use spring to push out the projectile. Not compressed air. Put strong spring in the tube, load spring, put the projectile in, release the spring and the spring will push away the projecile like crossbow. The spring will not compress air but push the projectile directly.
dude you should make it so it lauches paint grenades and smoke grenades now that would be awesome
Awesome I went to go look at the trip wire bang alarm that is really cool
im moding this design to make it shoot like an airsoft grenade launcher. thanks for the idea :)
I wouldn't recommend making the paintball gun adapter shown at the end of your video. There is nothing to regulate the fps and firing paintballs at people like that could hurt someone. Imagine if it fired hard enough to blow a paintball through a visor? Most fields require us to clock our fps when we check in. The rocket or mortar is safer provided it's not aimed directly at someone. Cheers.
He is the most interesting man in the world.
Been a subscriber since RUclips came out on different account
i love this videos to. i love to build the things he builds.
i like it how he just shoot a football in his neighborhood over and over again
I have one now too camp and all but
Mine is blue camo and is really cool. THANK YOU KIPKAY
I'm sure you could, with a nice paintball barrel attached and a Tiberius Arms First Strike Paintball Round..Attach a scope, a stock, and some sort of forestock..BAM sniper rifle..however using a ball valve would have a kinda hard, awkward trigger pull and that could mess up your shot. Its better as a bazooka or a shotgunblast.
@kipkay I'm curiosity, why is the middle pipe needed?
Couldn't you use a adapter between the ball valve and the CO2 adapter?
Could it be because the threaded adapter part is to long?
Maybe it could be cut with an angle grinder to fit without the pipe... 🤔
Anyways, great project!
I'm building my own with a solenoid as a trigger.
Kipkay plz make a flamethrower out of a Nerf gun!
haha i wish this guy was my science partner when i was in school... lol woulda been a fun year
dude, this guy is beast
THIS GUY IS SMART!!! LIKE IF YOU AGREE.
you could put a bit of fly wire over the end of the paintball adapter instead of the screw to ensure maximum accuracy
@vu284
He did, kinda. His Hi Powered Nerf gun was essentially a very low impact potato gun (in that it used an ignition spark and spray fuel to launch nerf balls).
As for this project, its really cool. I have a interesting thought though: could you modify it so that instead of the ball valve you used an electric sprinkler valve, that way you can shut off without risking losing all your pressure at once.
download thse videos and keep them for the apocalypse
because you can mod all of kipkay's stuff to be more than just a nerf football launcher.
If you tweak the mousetrap with a more powerful coil enough to twist the valve, I thing it will work just great.
I love watching these I'll propaply never build one but still
I built one worked great.
Now to awkwardly go next door and ask for my nerf rocket back.
I never build enything you make kipkay cos it's all to good for me ( as I am 13)
But this video is amazing and will be a weekend project for me and my dad thanks very much !!!
Yea, attach a string to the pin and the other end to the top of the gun and when it shoots out it will pull the pin and the grande will go.
Or you can do it the other way around :P
Im getting into lasers and have been subbed for a while and I had 2 questions.
1. Is it absolute required for me to get laser glasses or goggles, if so where do I get them.
2. Where could I get a cheap laser that will burn firework wicks and maybe other things.
thanks so much!
that paintball coming at the screen scared me
I got from card tricks to magic tricks to this
it doesn't really matter i believe, as i use the Nerf pocket howler with the whistle removed, and you can only just about wedge it in the barrel and it go's about 450ft
Your neighbors must love you