Thank you very much for your video. Although this was not the problem with my car you pointed me in the right direction. very thourought guy and step by step couldnt be any better. guys like these deserve to have a double like button.
Thank you so much! God bless you! My problem was exactly the ignition relay. A $10 part that could have cost me 20x that to have it towed and someone else repair it! The sensor is mounted upside down against the side wall of the car. My window seal leaks a little, and I think the moisture helped lead to its corrosion. It ran fine until I left on vacation for about a week, and when I came back it would not start at all - maybe without the constant starting / running the corrosion was not getting cleared away. After installing the new part I put RTV around it to help prevent future corrosion.
+Aaron Bishop Great job.Your right about the sitting contributing to the no start.Thanks for your feedback and for watching.I'm happy to save you so much money.
Thanks so much. I have a hyundai sonata and I only know the basics of car care and I'm having the same problem. This was an awesome way to teach someone who doesn't know much! Thanks so much, I really appreciate it!
I don't think there's room to improve your video because you did a great job . others could possibly have shown the same things you did but they would have taken 45 minutes or more to do what you did in 9 with good explanations & editing .
I bought a new starter o2s cencer and nothing. I watched ur video and ur step by step instructions on very important things that can very complicated but you're made that problem simple and easy to track down And fix. Keep up the good work. And thank you for your knowledge do you answer questions as well?
Good video, this really helped me out. By explaining this stepwise I figured out that the crankshaft sensor came loose while I was replacing the radiator. seems like many other videos skip the troubleshooting steps. Thanks for posting
Great video but my Hyundai Tucson 2.0 gsl manual, I start the starter it turn but engine won't start crackling I had to force start engine by pushing accelerator and key simultaneously. I did send the car at Hyundai workshop but they failed to fix my car. Thank you
wow i think this video was very helpful and this is the samr problem to a 2003 eclipes gts and im tbinking that might be the problem thanks alot man very helpful video to our problem
Hey jim i have a 99 gmc safari and the van sat for about 2-3 months and i had hard time starting it, than when it would start when i put it in drive it would die so that happened like 3 times that day finally drove it like 100 ft with my foot on the throttle to keep it running, now it will not start at all i have spark, fuel pressure i have about 30 psi, fuel filter was replaced 2 yrs ago and fuel pump but the pump was an ebay pump so does this mean the fuel pump is weak because i do hear the pump running when i cycle the key and i have power at the pump so ive tried everything am not sure what else to do besides putting a new fuel pump in and i just wanted a professionals opinion before i do all that since the tank has to be dropped thank you
Hello Jim, not sure if you are still active but I'm having the same issue with Hyundai getz 2007. Fuel pump replaced, crankshaft sensor replaced, cam sensor replaced. The car could be able to start but I need to press the pedal a few times if it is still cold. When started, switch on the AC. The car immediately dropped its idle and the engine shut off unless the pedal rpm was pressed to maintain good rpm.
Great video I have a 2005 hyundai accent and it's doing the same thing I changed the spark plugs and the coil and the camshift sensor and the other sensor and it won't start
Did you check for codes before you did anything?If there was not codes then you will need to check for spark,fuel,compression and injection pulse.If any of these are missing you will need to check that part of the car first.Let me know
I have a 2002 hyundai accent and it will turn over but nor crank and I have no idea what to do. I'm going to rewatch the video and try to figure it out. I appreciate it though!
Jim I got a 2004 27L Santa Fe It will fire but won't continue to run. Also the Starter seems to just turn with the bendix gear not turning the flywheel after this Firing happens then I have to wait at least an hour or two with the same results. BTW I have replaced the starter it does the same thing. What should I do? Thanks.
Hello my name is Max, What type of test light did you use. I'm 100% color blind and I have yet to find a test light that has both red and green lights w/the sound alert. Thank you for your time. And may all your efforts be blessed. Mad Max Automotive.
Watched your video, I have the same issue. Cranks but won't start. I'll give it a try. Also when cars running, I travel about five miles and the car well stop running. Good crank no go? Need help. Thank you. 😖🙏, there's plenty of gas. ✌
Thanks for the video, easy to understand, i think I have the same problem, by the way i have a 2001 Hyundai Santa Fe 2.4 liter, can you help me to locate this relay on my car, like you said, main relay for computer and fuel system, i had bought the Haynes repair manual it's not there, or unless it's me that don't know how to look for. If you have time to help me to locate this relay on my car, thanks in advance...
I have a 2005 elantra which has a possibly the same problem. I pulled the inside of the car panel where the relays are located but from your video is different ? Can you help with locating the 2005 elantra ?
hi jim on the video you said the green wire should have power all the time but i have a 2000 hyundai tiburon and when i connect the tester on the green wire it doesn't have any power but i conect it to the red one and it does do you think you said it wrong or i have a problem with the power?
Hello Jim I am eric I'm in Alaska working on my 05 Hyundai sonata 6cyl. GOOD CRANK GOOD SPARK I can hear fuel pump engage so I bought a scanner it says 0 NO CODES . I sprayed starting fluid in the throttle body with the damper flaps open while cranking and NADA!! NOTHING! it sounds like it wants to start it will seem to fire and then go away as fast as it does. I thought the starting fluid would make it roar!!! Especially since I have spark it's baffling to me Any advice?? 6th day down. When I parked the car that evening it ran flawlessly also no check engine lights what so ever. It's always had air bag light on though. Please advise if possible Thank you, ERIC Thankful for your wonderful videos of education!
Hi Eric,There are a few things that are needed for a car to run. Spark, Fuel, Compression and injection pulse. If it has spark and it will not kick over with starting fluid there maybe a problem with either compression or injection pulse. How many miles on the car? Was the timing belt ever replaced? typically in the range of 60,000 to 90,000 miles
@@jimthecarguy it has 154,000 , the tachometer registers when I crank, also I pulled all 3 front spark plugs and felt air hit me when it was cranked, the plugs were wet but were able to produce good spark . Should I rent the compression tester? Also I bought multimeter last night so i can check injector power like you suggested . Jim should it fire with a fuel source since I have spark? I bought the car at 139,000 the lady did not know if timing belt had been replaced. It's been nice the last few days at 15 to 20° this morning it starting back down to below zero. Dammit jim I'm an operator of heavy equipment not a mechanic!! LMAO sorry I just had to say that. Star trac fan!
Hi Jim! I have a 2001 Hyundai tiburon. Would this be similar to my car? It cranks but doesn’t start. Change do the crank shaft sensor cause that was he issue before. I started it, instantly died. And will crank but not start
Thanks man.. wow. Not sure if that's whats wrong with mine, but will find out this afternoon. Already sent to shop. Nice video. My issue is 2004 Santa Fe just stopped cranking. Replaced fuel pump and checked fuel output at fuel rail. Truck will idle and run with ether at intake. My current guess is that fuel is not getting to the injectors. I have checked fuses under dash and engine, none found bad. Switched relays, none found bad. Off to the shop it went... Any thoughts?
hi i have a crank no start issue with my 04 mitsubishi spyder i am not sure what happened but it was sitting for a while so i went to jump it but it wont turn over do you think that it is a relay like this in your video that could have done this? also it turned over before the battery died i cant find anything online that helps with my problem do you have any ideas? also i replaced the plugs and fuel pump before it stopped turning over any help would be greatly appreciated.
My 2004 is doing the same thing it will start sometimes but it will not start if I keep the a/c button on when I have the car turned off I will have to cut the a/c button off in order to start it can you tell me what kind of problem I'm having?
Hey Jim, love the video! I have an 04 with the same problem but I replaced that relay, the fuel pump, and we still have no start. It cranks over and if you spray starting fluid in it, she'll run but when you stop spraying, she'll shut off. Any tips you could possibly have to help? It's also a manual transmission if that helps
Check for fuel at the fuel rail , check fuel pressure with a fuel pressure tester , if no fuel at the fuel rail check fuel pump to make sure it is working , remove gas cap and listen for a winning noise in the tank when you turn the key on , you may not always hear that key on prime .If no noise check for ground and 12 volts at the fuel pump .You may have a wiring problem.If fuel pump checks put ok .check for stopped up fuel filter.If you have good fuel pressure at the rail then check for injector pulse.Use node light to check for pulse .if no pulse check for power and ground.You may have a wiring problem going to your fuel pump or injectors.
Awesome Fix ! I have a 2004 Santa Fe that has 200,000 miles on it and it runs perfect except it cranks and wont start...I will diagnose it by following your example . The only thing different is that the BRAKE light in the dash wont go out as well as the BATT. light it cranks fine...???? I pulled the console & checked the emergency brake & all the connections seem to be solid... I also checked the ALT. 120 amp fuse on the fuse block everything good as well.I checked the brake fluid level & the low fluid switch and it was within tolerances...I am stumped ...any ideas ? Thanks in advance//////!!!
I have a 2002 Suzuki xl7 shut off while driving. then wouldn't start. I did a compression test it was really low I'm not sure if the tester was good so im getting a new one in the morning. there was oil in a spark plug hole. hoping it's not a head gasket 130000 miles no water in oil or visa versa. it smelled like gas when it was running
I THINK IM HAVING THIS PROBLEM WITH MY 2004. sorry caps. anyway, i have power to my injectors (8 volt) is that enough or does it need the 12? going home to check this relay tonight. any suggestions are greatly appreciated! thanks for great vid!
any advice on where to start looking why its low? the run down is: the car worked great drove me to Florida from Indiana and worked great for a month or two. randomly, once i stopped somewhere it wouldn't start. then after a random period of time it would start and drive me where ever with no issues or rough ride. then one day it never started again. i took it to Hyundai dealer and they said fuel pump for $500. i got one at auto zone and changed it myself works great. i have since replaced (from junkyard) the engine control relay, computer, and fuel regulator. i have verified i have fuel coming to the rail. just no pulse. at this rate im stuck not sure how to proceed. any advice is much appreciated.
Hello sir my car when I started it take me 3 time to turn the crank so can started after the engine become hot would not start again until cool down hope you help me and advice me which part I should repair I have code pressure sensor ,thank you
I have a 2002 hyundai accent and changed the main relay like you did on your video but still can't get it to start. It cranks but just don't start and I even changed the crankshaft position sensor and I don't know what else it could be because I know when the crankshaft position sensor goes out in the car won't start and I'm not getting no spark and I don't know what else to do to get the car to start running but I would like to get up in you from you if you know what it could be.
Hi Jim, thanks so much for the video! I'm having the crank but no start issue on my 04' accent. I put a screw driver into the plug wire connector and got my wife to turn the ignition and saw no arcing. Hoping you can give me a bit of advice how to proceed? You mentioned a crank shaft sensor in the video, should I try replacing that first or could it be something else? Thanks so much again Jim.
+Dallas Kolotylo Just a few questions,were you driving when it stalled?Also when you crank the car does the tack move on the dashboard? and did you ever replace the timing belt?
+jimthecarguy Thanks so much for the reply. So I replaced the timing belt at 110,000 KM (so about 80,000 miles? Im in Canada) and the car is at just around 130,000 KM now, so the timing belt should be a-ok. I was not driving when it stalled. It drove totally fine, no weird noises or anything, then pulled into my parking garage, then next morning went to leave and it just wouldn't start. Just went to try and the tack does not move at all when I crank it.
Hi, Jim that was a great video. I'm Soni and I have a 2002 hyundai accent verna 1.5 l m/t that cranks but wont start. There's no spark and the fuel pump wont work when I start it. There is power to coil connector and injector though. Help me, please, Jim.
Jimmy, i strugle to start my trajet 2.5 v6 after installig new engine. It cranck but no start, could this be fuel pump or injectors as its suppose to feed when swich the car on? Please assisst
hello mate, i got an seat ibiza 2006 , i was driving it normal and sudenly car stoped (EPC and engine lights on the dash) i stoped in a safe spot, when i try to start it upm its cranks but the engine its nto starting ) any info?
good morning sir. i have the same problem. i have An 02 sonata with a new injectors. fuel pump wires plugs ect crank posit sensor and filter. the car started having a p0171 and p0174 code a month ago. but still ran good. however once i replaced the fuel pump. the car cranks all day. but wont start. do u know where the relay is on a 2.7 liter sonata. its an 2002. thank you sir. i need help
I have a 2007 Impala I was driving it and pressed the gas it went straight to the floor with no speed, cut off the motor started knocking now it turns over but won't start can u tell me what's wrong
hi jim you were right. it was the timing belt. but now it still wont start. I am not sure it is on top dead center. please help me. I am learning. I have a 2005 Hyundai accent. 1.6 liter. I put it on tried to run it and it just turns over but wont start. I think it is a 180 degrees out but not sure. I am lost . thank you very much
I have an 03 Hyundai Elantra Gt and it does the same things. I replaced fuel injectors, fuel pump, and a few other things I can't even remember. I got the car started before but it stalled after a while. It hasn't turned on since then. Whats the name of the relay cause I'm not sure its located in the same area. I rather buy it and replace it and hopefully it works.
My 2008 Dodge Magnum has no start issues when I try to crank it it's like it's a continuous run trying to start but cant and I have to turn the key off and after a few hours or so of it sitting it will start. The car has done this to me a few times now and the first couple of times was before the brand new fuel pump was put in but 2 days ago I went to run some errands and I was going to make a u turn and the car shut off on me without warning in the middle of a intersection it wouldn't start again so I had to push it to the side of the road and get someone to come tow it and I am still unable to get it started it's just doing that continuous turn over without starting. I did put a little gas in the engine and it started up for a second but shut off again I checked all the fuses and they are all good I even switched my fuses around but nothing has changed..I don't know what else to do
we have a 2004 accent. dont start . no spark. changed crank position sensor still nothing. checked timing ok. getting fuel. no spark. help can it be this relay under dash if not water ruined
Yes, the point of the fuse is to set a restriction. Think of it this way, if you multiply 12 (volts) x 10 (amps) that would equal 120 (watts). If you put a 15amp fuse in it would be 180(watts) and that'll burn out whatever it is that fuse goes to by over amping it.
Hi jimthecarguy how you doing, I got a question about a 2002 Hyundai sonata v6, I replace a bunch of parts can think about is affecting for the car just crank but it won't start any ideas you can help me with thanks,?
i have this same issue on my 2004 hyundai elantra i have spark but i cant see if i have power to the fuel injectors. i dont think i do have power there and i dont know if i have a relay like the one shown on this video please help
Hi Jim, I have a Hyundai lantra stationwagon 1999 a few weeks ago it started playing up it would start first pop in the morning but when I got into town and turned it off it wouldnt start again for several hours then start again like nothing was wrong... I did find I could crash start it at this stage... Have changed the coil and has new spark plugs but hasnt helped it has now started dying while Im driving it and has got harder and harder to crash start... Although will still start first pop after several hours (when its totally cooled down) it is now lucky if I can get a cpl off ks before dying again... Any ideas what could be going on with it.. (just like to add its not using oil and when it does go its still cheap on gas... I live way out in the country and my car is my life line... Am getting a bit sick off sleeping on the side off road in it (although I must add it is quite comfortable) LOL....
Thanks heaps for reply Jim... No havent had car on scanner for codes... Bit strapped for cash been hoping it is something simple and easy fix. (hoping LOL)... Just tried car and the needle doesnt move at all for RPMs will cranking the engine.
If the rpm's don't register you should check on a scanner but if money is tight and no access to a scanner a good guess would be a bad crank sensor.But it is only a guess.Keep me posted.Jim
Jim, you are a genius!. Jim I have the same type of hyundai accent 2002, the engine cranks, but It won't start, no spark, I can smell gas coming into the engine, again no spark, all fuses are ok I checked the main relay under the driver side, It has continuity. before that happened, the car started with low idling, while idling a diode resistor in the fuse box fell off shutting down the engine. I can't restart it, No spark at all. Any suggestion, Thank you. Ralph
+Ralph Nova You will need to do some diagnostics to pin point the problem.Check my other videos for diagnostic help.ruclips.net/video/1L4nB2NdA0U/видео.html , ruclips.net/video/5aeju-4V6vo/видео.html ,ruclips.net/video/gNe8EzJQMCY/видео.html
mine did this, turns out the immobiliser chip in the key was broken, just used my spare and now its fine. if the chip is faulty the yellow key icon light on the guages wont show on ignition
Awsome video sir I have a 2004 Pontiac grandam cranks but won’t start battery’s good,spark plugs fire up, has gas, anything else you recommend to look at ????PLEASE HELP
Possibly crankshaft position sensor, that was my issue in 2004 Hyundai Sonata 2.4L, that was experiencing the same symptoms. Though I had to tear down the whole side of the engine to replace it.
Orlando Brown It is actually called the main relay .If you need the exact number send me an email tomorrow .I will check the number at work for you.Jim
Jimmy, I have an Hyundai Accent 2000 model...Sometimes when I start it cranks but doesn't starts....But in slow speed theres a messing...? When I drive below 20 kph it cranks & mess up...Can you please help me...?
hi im having trouble with my 2002 ford expedition i got a diagnostic code 1233, so I changed the fuel pump and fuel filter, but still won't start cranks, but no start i was told it could be fpdm, I can't seem to find it I've looked in the back by the spare tire and can't find can anyone tell where it is please. or if it even has one.
I have a 2005 Hyundai accent. drove it to work. came home and got to a stop sign and car cut off, but would not restart. it sounds like it is starving for fuel. I also check the fuel relay and installed a new fuel pump about 4 months. please help.
+Lisa Smith You will need to pin point what the problem is .Follow my advice in this video and I also have a few other videos you can watch.Check into it further and keep me posted.Also have you check the timing belt ? Very important.Jim
I have a 89 f150 and my engine will crank but won't run Ik it it is a fuel issue I have put both pumps one for the tank and the one on the frame it still won't start. when I put starter fueled in to the engine it will start. I don't know what to do and I'm getting a bit tired of it. if you can help that will be great
Thank you very much for your video. Although this was not the problem with my car you pointed me in the right direction. very thourought guy and step by step couldnt be any better. guys like these deserve to have a double like button.
Thank you so much! God bless you! My problem was exactly the ignition relay. A $10 part that could have cost me 20x that to have it towed and someone else repair it! The sensor is mounted upside down against the side wall of the car. My window seal leaks a little, and I think the moisture helped lead to its corrosion. It ran fine until I left on vacation for about a week, and when I came back it would not start at all - maybe without the constant starting / running the corrosion was not getting cleared away. After installing the new part I put RTV around it to help prevent future corrosion.
+Aaron Bishop Great job.Your right about the sitting contributing to the no start.Thanks for your feedback and for watching.I'm happy to save you so much money.
Thanks so much. I have a hyundai sonata and I only know the basics of car care and I'm having the same problem. This was an awesome way to teach someone who doesn't know much! Thanks so much, I really appreciate it!
Thank you for your feed back and for watching.Good luck.Jim
+jimthecarguy does 96 dodge stratus have kill switch after accident
Not that I can recall.Email me tomorrow I can check on my computer at work.
I don't think there's room to improve your video because you did a great job .
others could possibly have shown the same things you did but they would have taken 45 minutes or more to do what you did in 9 with good explanations & editing .
Thank you for your feed back I try to edit the parts of the video that are not needed.Jim
I enjoy how knowledgeable you are on cars. Step 1, step 2, step 3...
Also? My transmetion sencer was my problem. Works good now. Your advice was helpful. Thanks👍
I wish you were my mechanic. Hello from Sioux Falls South Dakota
I bought a new starter o2s cencer and nothing. I watched ur video and ur step by step instructions on very important things that can very complicated but you're made that problem simple and easy to track down And fix. Keep up the good work. And thank you for your knowledge do you answer questions as well?
Good video, this really helped me out. By explaining this stepwise I figured out that the crankshaft sensor came loose while I was replacing the radiator. seems like many other videos skip the troubleshooting steps. Thanks for posting
David Erickson Great I'm happy to help
Love your New England accent Jim!
Great video but my Hyundai Tucson 2.0 gsl manual, I start the starter it turn but engine won't start crackling I had to force start engine by pushing accelerator and key simultaneously. I did send the car at Hyundai workshop but they failed to fix my car. Thank you
Thank you my good sir I think you have helped me fix my car
Glad to help
I just want to think you for all your helpful advise ! Your one of the greats !
wow i think this video was very helpful and this is the samr problem to a 2003 eclipes gts and im tbinking that might be the problem thanks alot man very helpful video to our problem
Hey jim i have a 99 gmc safari and the van sat for about 2-3 months and i had hard time starting it, than when it would start when i put it in drive it would die so that happened like 3 times that day finally drove it like 100 ft with my foot on the throttle to keep it running, now it will not start at all i have spark, fuel pressure i have about 30 psi, fuel filter was replaced 2 yrs ago and fuel pump but the pump was an ebay pump so does this mean the fuel pump is weak because i do hear the pump running when i cycle the key and i have power at the pump so ive tried everything am not sure what else to do besides putting a new fuel pump in and i just wanted a professionals opinion before i do all that since the tank has to be dropped thank you
Good job ser that was a helpful video for me thank you soo much
Hello Jim, not sure if you are still active but I'm having the same issue with Hyundai getz 2007. Fuel pump replaced, crankshaft sensor replaced, cam sensor replaced. The car could be able to start but I need to press the pedal a few times if it is still cold. When started, switch on the AC. The car immediately dropped its idle and the engine shut off unless the pedal rpm was pressed to maintain good rpm.
Awesome info and great video! Thanks!
Great instructional video, Thanks for posting!
Thank you for watching and your input.
Great video I have a 2005 hyundai accent and it's doing the same thing I changed the spark plugs and the coil and the camshift sensor and the other sensor and it won't start
Did you check for codes before you did anything?If there was not codes then you will need to check for spark,fuel,compression and injection pulse.If any of these are missing you will need to check that part of the car first.Let me know
That is nice to know and I will check that on my Ford Explorer to see if that could be my problem also.
Terrific presentation. Thanks
Glad you liked it!
Awesome man! Thanks great video and your a great teacher.
Thank you for watching. Watch for the next free tool giveaway coming soon.
Very clear and logical - thanks
i think that's the problem on my accent. i will let u know.... thank you men!!!!
Good luck let me know how it works out for you
jimthecarguy where I'm.can.buy the sensor
I think you can only get it at the dealer
Okay thanks Jimmy
it work for me!,, ty man. sorry for the late coment...
I have a 2002 hyundai accent and it will turn over but nor crank and I have no idea what to do. I'm going to rewatch the video and try to figure it out. I appreciate it though!
I have the same problem
Jim I got a 2004 27L Santa Fe It will fire but won't continue to run. Also the Starter seems to just turn with the bendix gear not turning the flywheel after this Firing happens then I have to wait at least an hour or two with the same results. BTW I have replaced the starter it does the same thing. What should I do? Thanks.
Great video , thanks .
Thank you ..your a big help..really knowa what you are doing..
Hello my name is Max, What type of test light did you use. I'm 100% color blind and I have yet to find a test light that has both red and green lights w/the sound alert. Thank you for your time. And may all your efforts be blessed. Mad Max Automotive.
Watched your video, I have the same issue. Cranks but won't start. I'll give it a try. Also when cars running, I travel about five miles and the car well stop running. Good crank no go? Need help. Thank you. 😖🙏, there's plenty of gas. ✌
U fixed it ?
Great video, fantastic tech.👍
Thanks for the video, easy to understand, i think I have the same problem, by the way i have a 2001 Hyundai Santa Fe 2.4 liter, can you help me to locate this relay on my car, like you said, main relay for computer and fuel system, i had bought the Haynes repair manual it's not there, or unless it's me that don't know how to look for. If you have time to help me to locate this relay on my car, thanks in advance...
I have a 2005 elantra which has a possibly the same problem. I pulled the inside of the car panel where the relays are located but from your video is different ? Can you help with locating the 2005 elantra ?
Thank you so much/ God bless you
You are so welcome!
hi jim on the video you said the green wire should have power all the time but i have a 2000 hyundai tiburon and when i connect the tester on the green wire it doesn't have any power but i conect it to the red one and it does do you think you said it wrong or i have a problem with the power?
Hello Jim I am eric I'm in Alaska working on my 05 Hyundai sonata 6cyl.
GOOD CRANK GOOD SPARK I can hear fuel pump engage so I bought a scanner it says 0 NO CODES . I sprayed starting fluid in the throttle body with the damper flaps open while cranking and NADA!! NOTHING! it sounds like it wants to start it will seem to fire and then go away as fast as it does. I thought the starting fluid would make it roar!!! Especially since I have spark it's baffling to me
Any advice?? 6th day down. When I parked the car that evening it ran flawlessly also no check engine lights what so ever. It's always had air bag light on though. Please advise if possible Thank you, ERIC
Thankful for your wonderful videos of education!
Almost 100 Thousand subs!!!
Hi Eric,There are a few things that are needed for a car to run. Spark, Fuel, Compression and injection pulse. If it has spark and it will not kick over with starting fluid there maybe a problem with either compression or injection pulse. How many miles on the car? Was the timing belt ever replaced? typically in the range of 60,000 to 90,000 miles
Just a heads up I will be doing a give a way when I hit the 100,000 watch for a video soon
@@jimthecarguy it has 154,000 , the tachometer registers when I crank, also I pulled all 3 front spark plugs and felt air hit me when it was cranked, the plugs were wet but were able to produce good spark . Should I rent the compression tester? Also I bought multimeter last night so i can check injector power like you suggested . Jim should it fire with a fuel source since
I have spark? I bought the car at 139,000 the lady did not know if timing belt had been replaced. It's been nice the last few days at 15 to 20° this morning it starting back down to below zero. Dammit jim I'm an operator of heavy equipment not a mechanic!! LMAO sorry I just had to say that. Star trac fan!
Jim look on my channel I put the sound of my car on there . It's the first video. You can also see the moose coming to love my roommate! Lol
Hi Jim! I have a 2001 Hyundai tiburon. Would this be similar to my car? It cranks but doesn’t start. Change do the crank shaft sensor cause that was he issue before. I started it, instantly died. And will crank but not start
Hi Jim, Is the relay in 2006 Tucson same place? Thanks
Thanks man.. wow. Not sure if that's whats wrong with mine, but will find out this afternoon. Already sent to shop. Nice video. My issue is 2004 Santa Fe just stopped cranking. Replaced fuel pump and checked fuel output at fuel rail. Truck will idle and run with ether at intake. My current guess is that fuel is not getting to the injectors. I have checked fuses under dash and engine, none found bad. Switched relays, none found bad. Off to the shop it went... Any thoughts?
+Ran A If the engine cranks and the fuel pump is running the next thing to check would be injection pulse.Keep me posted.
Do you happen to know the name of that relay??
Great video
hi i have a crank no start issue with my 04 mitsubishi spyder i am not sure what happened but it was sitting for a while so i went to jump it but it wont turn over do you think that it is a relay like this in your video that could have done this? also it turned over before the battery died i cant find anything online that helps with my problem do you have any ideas? also i replaced the plugs and fuel pump before it stopped turning over any help would be greatly appreciated.
My 2004 is doing the same thing it will start sometimes but it will not start if I keep the a/c button on when I have the car turned off I will have to cut the a/c button off in order to start it can you tell me what kind of problem I'm having?
Hey Jim, love the video! I have an 04 with the same problem but I replaced that relay, the fuel pump, and we still have no start. It cranks over and if you spray starting fluid in it, she'll run but when you stop spraying, she'll shut off. Any tips you could possibly have to help? It's also a manual transmission if that helps
Check for fuel at the fuel rail , check fuel pressure with a fuel pressure tester , if no fuel at the fuel rail check fuel pump to make sure it is working , remove gas cap and listen for a winning noise in the tank when you turn the key on , you may not always hear that key on prime .If no noise check for ground and 12 volts at the fuel pump .You may have a wiring problem.If fuel pump checks put ok .check for stopped up fuel filter.If you have good fuel pressure at the rail then check for injector pulse.Use node light to check for pulse .if no pulse check for power and ground.You may have a wiring problem going to your fuel pump or injectors.
Also check fuse to fuel pump and if fuel pressure is high or low ,check fuel pressure regulator.
Does your car have a inertia switch that might have tripped ?
Have you found ur issue
I have same problem I’m actually going to try to change the ecu
Would you be able to replace the relay with any 5 pin relay?
Awesome Fix ! I have a 2004 Santa Fe that has 200,000 miles on it and it runs perfect except it cranks and wont start...I will diagnose it by following your example . The only thing different is that the BRAKE light in the dash wont go out as well as the BATT. light it cranks fine...???? I pulled the console & checked the emergency brake & all the connections seem to be solid... I also checked the ALT. 120 amp fuse on the fuse block everything good as well.I checked the brake fluid level & the low fluid switch and it was within tolerances...I am stumped ...any ideas ? Thanks in advance//////!!!
Did you check on a scanner?Did you do any diagnostics yet?
I have a 2002 Suzuki xl7 shut off while driving. then wouldn't start. I did a compression test it was really low I'm not sure if the tester was good so im getting a new one in the morning. there was oil in a spark plug hole. hoping it's not a head gasket 130000 miles no water in oil or visa versa. it smelled like gas when it was running
I THINK IM HAVING THIS PROBLEM WITH MY 2004. sorry caps. anyway, i have power to my injectors (8 volt) is that enough or does it need the 12? going home to check this relay tonight. any suggestions are greatly appreciated! thanks for great vid!
8 volts is a little low it should be very close to battery voltage.Let me know how you do or if you need any advice.Jim
any advice on where to start looking why its low? the run down is: the car worked great drove me to Florida from Indiana and worked great for a month or two. randomly, once i stopped somewhere it wouldn't start. then after a random period of time it would start and drive me where ever with no issues or rough ride. then one day it never started again. i took it to Hyundai dealer and they said fuel pump for $500. i got one at auto zone and changed it myself works great. i have since replaced (from junkyard) the engine control relay, computer, and fuel regulator. i have verified i have fuel coming to the rail. just no pulse. at this rate im stuck not sure how to proceed. any advice is much appreciated.
Is this the same for elantras ?
Hello sir my car when I started it take me 3 time to turn the crank so can started after the engine become hot would not start again until cool down hope you help me and advice me which part I should repair I have code pressure sensor ,thank you
I have a 2002 hyundai accent and changed the main relay like you did on your video but still can't get it to start. It cranks but just don't start and I even changed the crankshaft position sensor and I don't know what else it could be because I know when the crankshaft position sensor goes out in the car won't start and I'm not getting no spark and I don't know what else to do to get the car to start running but I would like to get up in you from you if you know what it could be.
Did you find out what was the problem
I have the exact same problem
What noid are you using?
Hi Jim, thanks so much for the video! I'm having the crank but no start issue on my 04' accent. I put a screw driver into the plug wire connector and got my wife to turn the ignition and saw no arcing. Hoping you can give me a bit of advice how to proceed? You mentioned a crank shaft sensor in the video, should I try replacing that first or could it be something else? Thanks so much again Jim.
+Dallas Kolotylo Just a few questions,were you driving when it stalled?Also when you crank the car does the tack move on the dashboard? and did you ever replace the timing belt?
+jimthecarguy Thanks so much for the reply. So I replaced the timing belt at 110,000 KM (so about 80,000 miles? Im in Canada) and the car is at just around 130,000 KM now, so the timing belt should be a-ok. I was not driving when it stalled. It drove totally fine, no weird noises or anything, then pulled into my parking garage, then next morning went to leave and it just wouldn't start. Just went to try and the tack does not move at all when I crank it.
If there is no rpm when cranking you should get a scan tool to check for possible codes and a scanner to check data .
+jimthecarguy does that mean it is likely not the crank shaft sensor?
No it is just to confirm that the sensor is no good.
Hi, Jim that was a great video. I'm Soni and I have a 2002 hyundai accent verna 1.5 l m/t that cranks but wont start. There's no spark and the fuel pump wont work when I start it. There is power to coil connector and injector though. Help me, please, Jim.
+soni hendra When you crank the engine does it show engine rpm on the tack.
Jimmy, i strugle to start my trajet 2.5 v6 after installig new engine. It cranck but no start, could this be fuel pump or injectors as its suppose to feed when swich the car on? Please assisst
yes jim that would be great. what is the number. it may be the values not sure
thanks for your video
hello mate, i got an seat ibiza 2006 , i was driving it normal and sudenly car stoped (EPC and engine lights on the dash) i stoped in a safe spot, when i try to start it upm its cranks but the engine its nto starting ) any info?
good morning sir. i have the same problem. i have An 02 sonata with a new injectors. fuel pump wires plugs ect crank posit sensor and filter. the car started having a p0171 and p0174 code a month ago. but still ran good. however once i replaced the fuel pump. the car cranks all day. but wont start. do u know where the relay is on a 2.7 liter sonata. its an 2002. thank you sir. i need help
I have a 2007 Impala I was driving it and pressed the gas it went straight to the floor with no speed, cut off the motor started knocking now it turns over but won't start can u tell me what's wrong
You will need to do some diagnostics and check on a scanner for codes.Check some of my other videos for further help
hi jim you were right. it was the timing belt. but now it still wont start. I am not sure it is on top dead center. please help me. I am learning. I have a 2005 Hyundai accent. 1.6 liter. I put it on tried to run it and it just turns over but wont start. I think it is a 180 degrees out but not sure. I am lost . thank you very much
Do you want to call me at work tomorrow I can talk you through it
Sup Jim is it all the same for 2000 accent
I have an 03 Hyundai Elantra Gt and it does the same things. I replaced fuel injectors, fuel pump, and a few other things I can't even remember. I got the car started before but it stalled after a while. It hasn't turned on since then. Whats the name of the relay cause I'm not sure its located in the same area. I rather buy it and replace it and hopefully it works.
Hi. Did u Manga to fix..i have the same problems
Jim - What kind of relay is that? What is it called if I need to order one? Thx!!
Hello Jim.....
would this video apply to a 98 lincoln town car?
Thank you..
Chris........
Nice video.
+Cliff Clay Thank you
+jimthecarguy your videos are very informative.
My 2008 Dodge Magnum has no start issues when I try to crank it it's like it's a continuous run trying to start but cant and I have to turn the key off and after a few hours or so of it sitting it will start. The car has done this to me a few times now and the first couple of times was before the brand new fuel pump was put in but 2 days ago I went to run some errands and I was going to make a u turn and the car shut off on me without warning in the middle of a intersection it wouldn't start again so I had to push it to the side of the road and get someone to come tow it and I am still unable to get it started it's just doing that continuous turn over without starting. I did put a little gas in the engine and it started up for a second but shut off again I checked all the fuses and they are all good I even switched my fuses around but nothing has changed..I don't know what else to do
we have a 2004 accent. dont start . no spark. changed crank position sensor still nothing. checked timing ok. getting fuel. no spark.
help can it be this relay under dash if not water ruined
Would it hurt the enginr if you put a 15 amp fuse in a 10 amp slot.
Yes, the point of the fuse is to set a restriction. Think of it this way, if you multiply 12 (volts) x 10 (amps) that would equal 120 (watts). If you put a 15amp fuse in it would be 180(watts) and that'll burn out whatever it is that fuse goes to by over amping it.
Hi jimthecarguy how you doing, I got a question about a 2002 Hyundai sonata v6, I replace a bunch of parts can think about is affecting for the car just crank but it won't start any ideas you can help me with thanks,?
Are u getting a check engine light
How much volts should I have if I test the spark plug cable and turn over the engine
i have this same issue on my 2004 hyundai elantra i have spark but i cant see if i have power to the fuel injectors. i dont think i do have power there and i dont know if i have a relay like the one shown on this video please help
good job
Lots of good info but it is hard to follow because the camera is jiggling so much
Hi Jim, I have a Hyundai lantra stationwagon 1999 a few weeks ago it started playing up it would start first pop in the morning but when I got into town and turned it off it wouldnt start again for several hours then start again like nothing was wrong... I did find I could crash start it at this stage... Have changed the coil and has new spark plugs but hasnt helped it has now started dying while Im driving it and has got harder and harder to crash start... Although will still start first pop after several hours (when its totally cooled down) it is now lucky if I can get a cpl off ks before dying again... Any ideas what could be going on with it.. (just like to add its not using oil and when it does go its still cheap on gas... I live way out in the country and my car is my life line... Am getting a bit sick off sleeping on the side off road in it (although I must add it is quite comfortable) LOL....
+gavin luff Have you check the car on a scanner for codes?When the car won't start and you are cranking the engine does the tack show RPM'S?
Thanks heaps for reply Jim... No havent had car on scanner for codes... Bit strapped for cash been hoping it is something simple and easy fix. (hoping LOL)... Just tried car and the needle doesnt move at all for RPMs will cranking the engine.
If the rpm's don't register you should check on a scanner but if money is tight and no access to a scanner a good guess would be a bad crank sensor.But it is only a guess.Keep me posted.Jim
Jim, you are a genius!. Jim I have the same type of hyundai accent 2002, the engine cranks, but It won't start, no spark, I can smell gas coming into the engine, again no spark, all fuses are ok I checked the main relay under the driver side, It has continuity.
before that happened, the car started with low idling, while idling a diode resistor in the fuse box fell off shutting down the engine. I can't restart it, No spark at all. Any suggestion, Thank you. Ralph
+Ralph Nova You will need to do some diagnostics to pin point the problem.Check my other videos for diagnostic help.ruclips.net/video/1L4nB2NdA0U/видео.html , ruclips.net/video/5aeju-4V6vo/видео.html ,ruclips.net/video/gNe8EzJQMCY/видео.html
Hi I have the same 2002 model but the crank shaft sensor has broken but we replace it but it did not start
Did you find out your problem
mine did this, turns out the immobiliser chip in the key was broken, just used my spare and now its fine. if the chip is faulty the yellow key icon light on the guages wont show on ignition
Hi I have a hyundai elantra 1,6gls 16v g4ed 2006 changed head gaskit timing is set but won't start just swinging
Hi Jim I had the same problem I'm wondering what was the relay name.. pls help
I already replaced the relay but the car won't start
hi. I have a 2003 one. an it turns over but won't start because it has no compression!!!! help please
cool good vido,,,,,
Awsome video sir I have a 2004 Pontiac grandam cranks but won’t start battery’s good,spark plugs fire up, has gas, anything else you recommend to look at ????PLEASE HELP
Fidencio Manzano Did you check it on a scanner for codes? How many miles does the car have?
jimthecarguy just saw your message I apologize so when we press on the paddle to give it gas it dies out but turns on when we spray starting fluid
Fidencio Manzano Did you scan the car for any failure codes?
Fidencio Manzano Check fuses and rely first do not just start replace parts.
Possibly crankshaft position sensor, that was my issue in 2004 Hyundai Sonata 2.4L, that was experiencing the same symptoms. Though I had to tear down the whole side of the engine to replace it.
What's the name of the Rely? Cause my 2004Hyundai Accent. Is doing the same thing.
Orlando Brown It is actually called the main relay .If you need the exact number send me an email tomorrow .I will check the number at work for you.Jim
Ok bro.
Also replace the starter
Jimmy, I have an Hyundai Accent 2000 model...Sometimes when I start it cranks but doesn't starts....But in slow speed theres a messing...?
When I drive below 20 kph it cranks & mess up...Can you please help me...?
ANTONY JOSEPH if you’re already driving it at 20kph why do you need to start it again if it’s already driving?
Hi,my car doesn't have spark what should I do no spark and feul ix35 Hyundai
What is the name of the relay?
I got a 2001 toyota solar has spark and fuel car cranks but cranks fast.what could it be?I put a new fuel pump
Did the car just stall or it would not start
I, I have hyundai elandra 2004 dies when I stop, what should I do plz help
hi im having trouble with my 2002 ford expedition i got a diagnostic code 1233, so I changed the fuel pump and fuel filter, but still won't start cranks, but no start i was told it could be fpdm, I can't seem to find it I've looked in the back by the spare tire and can't find can anyone tell where it is please. or if it even has one.
I have a 2005 Hyundai accent. drove it to work. came home and got to a stop sign and car cut off, but would not restart. it sounds like it is starving for fuel. I also check the fuel relay and installed a new fuel pump about 4 months. please help.
+Lisa Smith You will need to pin point what the problem is .Follow my advice in this video and I also have a few other videos you can watch.Check into it further and keep me posted.Also have you check the timing belt ? Very important.Jim
I might be mentally challenged, my car might just need some gas
Glad you enjoyed it
I have a 89 f150 and my engine will crank but won't run Ik it it is a fuel issue I have put both pumps one for the tank and the one on the frame it still won't start. when I put starter fueled in to the engine it will start. I don't know what to do and I'm getting a bit tired of it. if you can help that will be great
+Andrew Inlow Have you checked power and ground to the pumps,fuse or the relay?
+jimthecarguy If you need a wiring diagram email tomorrow I'll be at work and i can send it to you.
+jimthecarguy yes I have. I have the twin tank and I'm wondering could it be were the lines split off to the different tanks?
Okay what if there is no spark I’m
Having that problem no spark turns over but won’t start
Good
02 sonato code p0335 camshafts change but still choking when start what cause it
hi nice video man . i have no spark no fuel .u think its the main? it was working fine . i was on the road an it die on me .u.u.
+drogo20 It could be but what year and make car do you have.I will try to help you out.
same 1.6 dohc 2003
and ty for the help
Did you have the car scanned for any codes?
no codes u.u
the relay works its the same .im looking for the ecu
You freaking ROCK!!!!
Flag not cool