I appreciate what you did. But, I don't even know how to lose my way to where the rings are. Can you do a video on that? A step by step guide on how to repair a smoky generator. Mine is pansun.
@@jaywealthmechanics9285 anytime I try to switch it on, it sounds like it's about to start, releases some bubbles from the carburator and doesn't come on
I really appreciate this channel but I have a problem thtI changed the from oil seat and the generator is still splitting oil I don't no where the problem is from pls kindly give me an idea
You will know a good shaft by Firstly: the sound of the generator when is on Secondly: you know when you loose the engine. the place where the connection rod lap. The extreme end and the middle is equal in shape.
Please rewatch the video and see dat all d rings faces d same place dat is not clock ringing u did ..pls rewatch ..by checking where u place the pressure rings.
@@jaywealthmechanics9285 pls I believe clock ringing is opposite opposite.but ur is NOT Rewatch and make corrections.U did not show the position of the oil rings faces very for people to see clearly.
I still remains on my points dat what u did here is wrong....where u place the first oil ring is d same place u put the pressure ring....and u said is clock ringing.i believe d pressure ring sure go to d other side of the first oil ring not d way u are doing urs.and u did not show us how u placed the Oil scarper.may be is facing up or facing down of d Arrow.
U are teaching in the wrong direction of the rings.what u teach here is not clock ringing.why should first ring and first pressure ring we face each other.it is not possible sir.
You people are Great!!! Will you kindly send us one Welding Genset, please?
0:31 cool hammer😎👍
No need to call Generator Repairer again na 😂😂😂😂
Thanks sir😅😅😅
Hahaha 😂. Still call them ooo. They have family to feed.
excellent work 👍
Thanks 😊
very good teach
Thanks and welcome
good
Thanks
Nice job
Thanks
Good evening
Good night
Good job
Thanks 😊
How crean the shaft with some spots on it, please?
Nice
Thanks 😊
What if i go through all this process you taught us...and the gen is still breaking our smoke what should be the next step to take sir
It can never bring out smoke after going through this process. It can only bring smoke if there is oil inside the exhaust or you use inferior parts.
It would be nice if you showed how you got to the piston.
Check my old video..
@JAY WEALTH MECHANICS If you made reference to your old video at the beginning of this one, I apologize.
@@1flyjcLIB1drone okay
I appreciate what you did. But, I don't even know how to lose my way to where the rings are. Can you do a video on that? A step by step guide on how to repair a smoky generator. Mine is pansun.
Okay I will do the video. Watch out
Help ring basic purpose?
Okay 👌
Thanks, but those the position really matters?
Yes it matters
If the rings is not fixed directly opposite ,will the generator start , when the rings are fixed upside down will it start
Yes it will start
What if the block is bad? What makes generator 200 fireman to stop by itself if it works for some seconds
@@MosesBenjaminKehinde if the block is bad it shorten oil quickly also.
@@MosesBenjaminKehinde check the oil gauge and the fuel supply.
Please can the expander ring face the direction of the exhaust ?
Ok
Good job,if any of the springs meeting gap is wrongly set what can be effect on the generator
The generator will short oil very quick.
What Can make a generator that I just changed the ring not work, sir?
Shortage of oil and smoking
@@jaywealthmechanics9285 The oil isn't short and I made sure the cam shaft timing was in sync with the shaft timing. I also changed the valve
@@DukeofOwo okay… what is now the issue with your generator.
@@jaywealthmechanics9285 anytime I try to switch it on, it sounds like it's about to start, releases some bubbles from the carburator and doesn't come on
@@DukeofOwo ground or change the valve
O meu gerador a gasolina está AST10000E está cria ar ,como resolver
I really appreciate this channel but I have a problem thtI changed the from oil seat and the generator is still splitting oil I don't no where the problem is from pls kindly give me an idea
If the engine oil is over gauge, there will be excess splitting of oil from the valve side. Check the oil gauge
Please how can you know a good shaft thank you
You will know a good shaft by
Firstly: the sound of the generator when is on
Secondly: you know when you loose the engine. the place where the connection rod lap. The extreme end and the middle is equal in shape.
Please how can I fix a connecting rod to a new pistol without the engine making noise
You will have to shorten the connecting rod to stop the engine from making noise . I will post the video soon
The name of the rings is 170 or what
Sir, if I fixed new piston and rings and it's a little bit stiff could that make the generator refused to start?
Yes it could make the generator not to start.
Pls which brand of piston rings is best in Nigeria thanks
Sumec firman and Honda
Sumec firman
Sumec firman
Sir
What can happen if all ring are positioned in one direction?
There would be loss of compression..
Hello, so if the block is bad, what do I do??
Replace it
For cars you can get oversized pistons, don't know abt gens tho
U did not explain or show us where the expanded rings will face at d top of the arrow on the piston.the expanded rings is it facing up or down.
Please rewatch the video and see dat all d rings faces d same place dat is not clock ringing u did ..pls rewatch ..by checking where u place the pressure rings.
They are place differently.. kindly rewatch and subscribe
@@jaywealthmechanics9285 pls I believe clock ringing is opposite opposite.but ur is NOT Rewatch and make corrections.U did not show the position of the oil rings faces very for people to see clearly.
You are right sir,the way he fixed the piston rings is wrong
Which piston is good to buy for generator
Sumec firman
What about the Shaft
Pls where can I get some of the rings to buy
Where is your location
@@jaywealthmechanics9285 please how can you identify a good pistol and ring's in the shops
I still remains on my points dat what u did here is wrong....where u place the first oil ring is d same place u put the pressure ring....and u said is clock ringing.i believe d pressure ring sure go to d other side of the first oil ring not d way u are doing urs.and u did not show us how u placed the Oil scarper.may be is facing up or facing down of d Arrow.
Uhmm you know nothing
U are teaching in the wrong direction of the rings.what u teach here is not clock ringing.why should first ring and first pressure ring we face each other.it is not possible sir.
You are right
He made a mistake there I think
Thank for your comments
Nice
Yeah