Jeep Patriot Tail Light Replacement / Tail Light Bulbs Replacement. Brake Light Turn Signal
HTML-код
- Опубликовано: 20 окт 2024
- Jeep Patriot Tail Light Replacement / Tail Light Bulbs Replacement. Brake Light Turn Signal Light Bulb
► Our Website: mechaniclifesty...
We took this video to show you how to replace the tail light or the tail light bulbs on a Jeep Patriot. This includes tail light, brake light, and reverse light.
It is the same procedure for all Jeep Patriots, which includes:
2007 Jeep Patriot
2008 Jeep Patriot
2009 Jeep Patriot
2010 Jeep Patriot
2011 Jeep Patriot
2012 Jeep Patriot
2013 Jeep Patriot
2014 Jeep Patriot
2015 Jeep Patriot
► 2ND Channel Subscribe: bit.ly/2a86p9Z
►►Honest Product Review Channel: bit.ly/2ygqUcy
► BMW E46 ZHP PROJECT bit.ly/2g8tOa9
► Ford Fiesta ST BUILD bit.ly/2a59UKp
► 2013 GT86 Project Playlist: bit.ly/2dz4xY1
Please LIKE and SUBSCRIBE for More DIY Videos!!!
5 NEW VIDEOS Every Week!!!
Thank you!
*Disclaimer
We, World Mechanics, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not World Mechanics.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/channel/UCJ9xpq0qUZevSEdBSFqO2ow
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Thank you the reverse bulb cost me $4.50. It literally took me 5 minutes to do. I called the dealership it would have cost me 75.00. Can I say lifesaver...no money saver.
Literally the same situation 😪 😂 the guy started totaling the expenses and I was like nope I'll figure it out
The funniest part of this video is how you made it look SO easy to pull those nubs off. I think mine were glued on.
38 years later im still struggling with mine
Thank you so very much. I was quoted $60 and $32 + installation to change a rear signal bulb. I paid $11 for 2 at CanTire, watched your video and did it myself. Thanks, again!
Definitely a helpful video but like I’m seeing many others say too - it is NOT that easy to pop off the screws. I have a 2016
real brother
I’m literally doing mine right now, the second is a pain in my ass
As someone mentioned earlier, push pin pliers are a life saver! $8 at harbor freight and came off in seconds. I was scraping and ruining the hell out of the plastic with a screwdriver. Some pins may just be worse than others.
Thank you so much for this! Worked on my 2017. The screws were tough at first until I focused on pulling the screw out first and THEN the middle piece. I replaced the entire tail light myself! :)
Good job! :-)
It went out again today and I'm so happy I refound this video! This time I had my son watch this and replace it. He did great! Thanks again!!
Thank you... I am a woman and needed to change or have my brake light change the left side and the store wanted to charge me $20 to change it because of you I can change it for under $8 thank you
Thank you for the video. I suspected this is how it's done, but I was reluctant to try it because I did not want to risk breaking the insert by prying it out if in fact that was not the way to do it. Your video confirmed my hunch. The whole process took seconds and saved me a ton of money. Again, thanks.
I did this and watched this video to help me. I gave this video a thumbs up. This worked perfectly but the process is not this quick..
Just a tip for anyone else who wants to do this: it is NOT that easy to get those screws out & it's even harder to get them back in.
If your screws come out that easily your tail light will eventually come loose and fall off when you open and close your trunk. Mine had extra padding around the actual screw.
My car is a 2012 And the screw was a pain to get off and on. It Took me an hour to push them back in. I almost felt like going to get a hammer but I didn't want to dent my car lol....
So helpful! Currently me 🥲
Any idea what these screws are called to buy new ones? In trying to remove them ours got super shredded. Nothing like video above. Like the plastic was all warped.
Listen, you made this so simple and to the point! Thank you for teaching me and saving time and money. LORD some people make long winded videos promoting their page but you got to the point and easy to follow instructions.
Took me 3 minutes - and I'm an old lady that's I've never worked on a car before. Perfect instructions. No problems. THANKS!
You guys just made me fall in love with mii patriot all over again, with my liberty I needed power tools just to replace the headlamps.
Thank you for showing me it’s as easy as the wrangler! And for not making it a 15 minute video!☺️
Thank you for a short and to the point video
Tail light went out right before my week long trip to Disney world. Was starting to stress out for the long drive. Glad I found this video. Thanks a ton!
Thank you for the video! This helped my husband and I change out the busted blinker bulb in my 2014 Patriot!
The blinker bulb is the littler one on the bottom right? I'm just checking cause I need to replace mine tonite
Nice short video for this procedure, the way it should be - thank you, my man!
The guy at auto zone didn't have a clue so off to you tube I go thanks for the simple instructions worked like a charm (:
I second this
2013 Jeep Patriot brake lights changed with help from your video. Thanks for posting.
Thanks for the video.. You made it straight forward and simple.
+jerranamo We are glad that it was helpful. If you ever have any questions let us know.
Outstanding Video. Took me less than 15 minutes to do. And I'm no mechanic by any stretch!
about to save 10 years worth of taillight changes
Thank you!!
Thank you so much, the screwdriver worked, definitely have time take your time so you won’t break it. You have to circle around the seal with the screwdriver to make it loose. I felt like I made a big accomplishment compared to my older model cars where you just unscrew the bolts to from the tail light.
thank you guys, this video has saved me money twice
It was as easy as it looked for my 2009. Thank you so much
My rear left turn signal bulb went out yesterday so thanks to you I will be able to fix it myself
Thanks that was helpful. I had newer plugs in the rear which took a little effort to get off as soon as I used a pair of pliers and a screwdriver 🪛 I was able to get it off. I took the old lightbulb out and put in the new one tested the brake and blinker and 4-way and everything was in working order. Thank you for showing this video. I had a feeling those plugs had to be removed from the tailgate next to the light, but I was not sure. As soon as I saw this helpful video I knew it was okay to be a little rough with them to get them removed. I finally got them out it took 4-8 minutes because I had a feeling that the light hadn't been in 10 +years. Anyways, I took the burnt bulb out and replaced it with the new one. And everything is working great I might just replace the other one because Now the right brake light isn't as bright as the new one now that I know how to do it. I have done it before just on an older model vehicle which was a few years or more ago.
Straight to the point. Thanks.
Thank you my friend. What a simple fix.
Thank you! Only cost me $8 and 20 minutes (it was stuck real good!) of my time!
It was very simple, thanks!
Thanks for the video. Just finished my bulb replacement.
Excellent! Just changed mine thanks to you guys!
+Troy Smith We are glad to hear that the video was helpful. Thank you for watching and if you ever have any question let us know
Me too, thanks ! I used an IC extractor for those clips, worked like a charm !
Perfect video! Easy and to the point!
Thank you soooo much! I am no mechanic once so ever! But thanks to your great video I was able to change my rear blinker! Thanks again!
Same here GREAT video brother 2015 patriot high altitude edition was spot on
Thank you. It worked just like you aid it would.
And it's just that easy !! Thanks .... Damn clips had me baffled .
Helped fix my sister's dead light! Ty!
Thank you. Much easier than I thought it would be.
Thank you , informative and to the point. 👍
Thank you, you saved me money. 🙏🏾
Thank you for helping
thanks - looks simple enough.
Thank you for watching and if you have any questions let us know
Thank you guys!
Thank you for the nice instructions.
Thank you for this video. ❤❤❤
Great video. Thanks 😁👍
Great video, super easy!
Great job. Saved me time. Thanks !!!!
Video just saved my life lol
Thanks. Did mine in 5 mins. Would of been faster but the clips were a pain and I went slow so I didn’t break them.
I'm gonna go try changing mines in a hour thnks for the video
Thanks for the help, from a 70 year old single lady!
Nice ring my friend
Thanks a lot!
Perfect video
Thank you !
Thanks for the easy lesson.
Can I just ask Jeep here, What wad wrong with screws!!? They worked fine for 100 years!
I had better luck with a pair of pliers. Thanks for the video
Great video. Thanks man!
What bulb should I grab for my brake light
Good video, man. Thanks for the upload!
Thx for the video
Great help. My son ran into porch and damaged my rear left door. Any advice on how to locate a door where I can count on to be ethical.
+shirley avery We are glad to hear that the video was helpful. If you ever need help with your vehicle let us know you can also find us on Our Official Facebook Page here: facebook.com/worldmechanicsofficialpage/?fref=ts
You can find parts on www.car-part.com
It is a network of all salvage yards and you can search by proximity to zip code. Sometimes you can even find one the same color.
Thanks so much
Thank you … I just changed a faulty brake light bulb … it took me only 5 min.
Thank you👌🏽
What is the rare turn signal bulb type? Do you have a number? Is it double with stop light? Two in one?
What light bulb part ID do you use for the blinker?
What rear light bulb should I buy for a 2009 jeep?
Good one
Very helpful! Thanks!
Thank you for watching us and we hope that you find the channel interesting!
the 3057 and 3157 are the same plug in bulb with 4 little wire prongs however they are staggered if you noticed so they will plug into the connector either way flipped over it will still slide into the connector , my question is will you still have the parking filament lite up and the larger brake filament when you step on the brakes no matter which way its plugged in ?
yes
thank you !!!!
Life saver!
+Salomon Islas we are glad it was helpful! Thank you for watching us. If you ever have any questions let us know!
thanks king
What is that little piece called that you removed with the screwdriver?
how come the service manual shows 3 lights bulbs in rear lamp unit, but I have only room for 2 bulbs? I noticed your rear lamp unit is the same as mine. BTW I have a 2009 jeep patriot
I need to replace the clips, do you know a part number ?
3157 for the tail bulb, what type for the little turn bulb?
If he popped that with a screw driver I’m the queen of England
No kidding
Hahaha that’s a good one
I popped one with a screwdriver and the other one broke when I tried lol
I had to do this today and I need a screwdriver and pliers just to make them come out. It was hell getting them out!
haha! can confirm. I practically destroyed those things.
Get push pin pliers! It will keep you from breaking a clip.
Yes! I was scraping the plastic trying to use a screwdriver, got push pin pliers from harbor freight (8 bucks) came off in seconds!
Thanks! Just had mine go out.
+Joshua Krome We are glad that it was helpful. If you ever have any questions let us know.
Thansk
Thanks !!
Gonna save me 25 bucks of labor charges thanks for that big ups from Gotham
Thanks
perfect ly explained
Is the brake bulb the same as the turn signal bulb? Mine just went out.
The break light bulb is a dual bulb for night running light (dim) and break light (bright).
You have taught me something my father should have taught me...
can you please if is posible,show me how to replace the front turn signals,i have a 2007 jeep patriot
JUan Rodas I do not have the Patriot right now but in order to replace the front turn signal, you will need to remove the 3 screws that hold the front part of the fender liner, you might need to remove to tire to have more room. Then pull the fender underliner and you will be able to access the turn signal bulb
Gracias 🙏🏽
Need to show how to take out the bulb. It has a diff end from other bulbs.
You made it look very easy....it wasn't.
It was you just have no mechanic skill whatsoever snowflake
I have a question, I noticed my left blinker went out. When I went to use it it did a beep sound and blinked real fast like it was working (but wasn't). Is this behavior normal when the light goes bad or is it a different problem like a relay?
Ok just fixed the light (thanks to your wonderful video) but how do I reset the blinker to stop blinking so fast?
It does that when the blinker is out, yes. If you replaced it properly it should stop blinking fast.
I freakin love how Euro this video is!!! Yek se mash!
Easy peasy
Anyone know if 2013, 2014 tail lights are compatible with 2015?
Yes, same bulb from 2007 to 2018
My left tail light keeps going out it may have water damage