Build came out super sick! Just finished my build in this case a couple weeks ago, but damn I didnt realize that it worked with the project zero board!
Glad that I found this Video. I had emailed Thermaltakes CS line concerning the Zero MB. They told me that it wouldn't fit with their tower 300 case... Clearly that was a lie. Slick build there.
You'll be better off wearing a Dunce Cap, because the only way to access the MB's USB and video ports, you'll have to remove the top grill, which will leave cables and your exhaust fan openly exposed.
Hi, I'm using the Deepcool LT720 AIO cooler and at 4:45 in your video where the radiator is mounted onto the chasis railing, did you use the supplied screws from Deepcool? The length of the screws with mine is around 8mm which is too long and I cannot tighten the screws without bending the fins underneath.
Why did you neglect to mention that in order to access the MoBo's USB and video ports that you'll have to remove the top of the case and leave some cables and the fan fully exposed?
I'm wondering the same thing. I've watched a bunch if videos and yet to see how to plug into the mobo. I don't mind dongles on the case. I would much rather not have to use wired USB like that. Much rather use the mobo's ports to keep the desk cleaner.
As we work hard to create great content we request removal of videos if the video does not credit us as the original creator or if someone uses our videos and tries to pass it off as their own work.
Did you have a clearance problem with the 24 pin psu connector cables and the rear case fans? I heard that that is the reason TT says the case isn't compatible.
Who’s a fan of the new BTF Project Zero motherboard by MSI? 🤩
On MSI's website TT Tower 300 isn't listed as compatible. Do you have access to all the connectors from behind? Seriously considering the same combo.
@@TheAnelor Yes, you will have access to all the connectors behind
Build came out super sick! Just finished my build in this case a couple weeks ago, but damn I didnt realize that it worked with the project zero board!
We also did not realize after purchasing the case!
@@archetype_origins that's awesome!
why is the cover of this vid so tough
Glad that I found this Video. I had emailed Thermaltakes CS line concerning the Zero MB. They told me that it wouldn't fit with their tower 300 case... Clearly that was a lie.
Slick build there.
Great looking built.
Thanks buddy!
I love the build, was considering making one just like it, but using a RTX 5070 or 5080 when it comes out.
gonna be a long wait...
I love it! 🎉
I hope you enjoy this system as much as we enjoy building it and making this video! 👌🏻
Very crazy, very good, very nice.
I wish you had a more in depth tutorial on the actual wiring; knowing where the wiring is supposed to go as a first time builder in this case is ROUGH
Just want to ask for clarification, Is it necessary to wear hazmat mask when unboxing that case?
Wasn’t sure if it was toxic ☢️
It’s why I clicked on this video 🎥. Once you opened it all up. Seeing how safe it was. You removed your mask 😷. To get started on your dynamic build.
so clean!
Appreciate it!
That was so clean I thought u were gona leave the cable management
Never leave cable management behind!
I was thinking about doing a similar build in this case, did you run into any issues with the project zero board?
No issue at all!
You'll be better off wearing a Dunce Cap, because the only way to access the MB's USB and video ports, you'll have to remove the top grill, which will leave cables and your exhaust fan openly exposed.
Merhaba mükemmel görünüyor lcd kit kutu içeriğinde var mı ayrı olarak satın mı aldınız
Damn! That's my dream pc build, fuckin superb 🔥
Thank you 👍🔥
水冷应该改成出风，只有一个出风，热量来不及散出去，导致极热
nice🎉
Thanks 😊
This case is amazing but did you need fans on the back. Most of videos i've watched don't use theses slots
Fans at the back are pretty much useless in cooling the components
@@archetype_origins Ok thanks
Hey great Build as always guys, Can this Case Fit a 4090? 4080? like one of the biggers ones
It can fit cards up to like 400mm long, which I believe should be all of them currently on the market.
Ya it can. See the case manufacturer's site they test with a 4090.
@@mal thanks man
@@parvchoudhary1732😊 - there’s a little shelf that pops out if you’ve got a bigger card.
Hi, I'm using the Deepcool LT720 AIO cooler and at 4:45 in your video where the radiator is mounted onto the chasis railing, did you use the supplied screws from Deepcool? The length of the screws with mine is around 8mm which is too long and I cannot tighten the screws without bending the fins underneath.
Why did you neglect to mention that in order to access the MoBo's USB and video ports that you'll have to remove the top of the case and leave some cables and the fan fully exposed?
Because this is not a review for the case 😅
@@archetype_origins Still misleading.
Currious how did you install the wifi antenna?
Don’t think I did on this one
How is the thermal of this case? Will it be too hot if I use 4090?
Wait where do the cables go. From the mouse and keyboard and stuff
Magic 🪄
I'm wondering the same thing. I've watched a bunch if videos and yet to see how to plug into the mobo. I don't mind dongles on the case. I would much rather not have to use wired USB like that. Much rather use the mobo's ports to keep the desk cleaner.
Where is your company located? Do you ship worldwide?
We’re based in Dallas, Texas. We only ship within the USA
Why do you guys upload your videos under the creative commons license and then call copyright strikes on the people that re-use your videos?
As we work hard to create great content we request removal of videos if the video does not credit us as the original creator or if someone uses our videos and tries to pass it off as their own work.
Does this also work with the Asus b760 BTF?
it has to be a micro atx motherboard
what smoke did you use ?
it's a fog machine
gamsahabnida
Howdy 🤠
Which country you will shift the pc
only in the US
hate such chassis!
Did you have a clearance problem with the 24 pin psu connector cables and the rear case fans? I heard that that is the reason TT says the case isn't compatible.
No issue or whatsoever when using the BTF motherboard