EP23 WRECKING YARD FIND FORD FALCON / RANCHERO ABANDONED FOR YEARS FIRST WASH AND WILL IT RUN ?

Поделиться
HTML-код
  • Опубликовано: 8 май 2023
  • THIS TIME IVE FOUND A 1963 FALCON / RANCHERO UTE ABANDONED IN A WRECKING YARD FOR YEARS . DRAG IT HOME TO SEE IF IT WILL RUN AND DRIVE .
    IT CAME FROM THE SAME WRECKING YARD AND THE HQ WAGON FROM EP20
    EP20 THIS WAGON FOUND ALONG WITH DOZENS OF CARS IN A WRECKING YARD , ITS PROBABLY THE MOST RUST FREE HQ HOLDEN IVE EVER FOUND AND IN THIS EPISODE WE GIVE IT , ITS FIRST WASH , FIRST START AND FIRST DRIVE IN PROBABLY A DECADE OR MORE. DONT FORGET TO CHECK OUT THE VIDEO OF THE WRECKING YARD WHERE WE FOR THE HQ . EP18 i come across an abandoned wrecking yard / junk yard and rescue a HQ wagon and a classic old Ek Holden but thats definitely not all we find. call it a shed / barn find or what ever you like but there is classic survivor cars everywhere, from a XB Ford falcon coupe , Monaro , Torana , a Mopar Charger ,a couple of chevy 56 / 57 , valiants , Commodore HSV clubsport even a few old jdm datsun and mitsubshi cars and much more ever a few old toyota 4x4 . So do take a look it doesn't matter if your into perfect body and paint work , patina , rust or whatever theres a bit of everything in this one for everyone. We will have a few of the cars we bought in future episodes shortly and hopefully you'll see them running and driving back on the highway after years of being parked and left to rot. cheers for watching Backshed . SO WHAT IS BACKSHED ALL ABOUT ?
    WE ARE ALL ABOUT SAVING OLD CLASSIC CARS AND MODIFIYING SOME ALONG THE WAY TOO.
    WE LOVE THE CLASSIC RESCUE , FIRST WASH ,FIRST START IN YEARS TYPE OF THING, GETTING OLD JUNK RUNNING AND DRIVING THEN PUT BACK ON THE ROAD AFTER YEARS OF BEING LEFT TO ROT IS WHAT WE DO.
    IT DOESN'T MATTER IF YOUR INTO FORD , HOLDEN , CHEVY , BIG BLOCK SMALL BLOCK OR ANYTHING IN BETWEEN WE MIGHT HAVE A VIDEO FOR YOU TO WATCH. IVE HAVE AND HAVE HAD A LOT OF CARS INCLUDING XB COUPE , XY FACLON GT , EH HOLDEN , F100 , VB COMMODORE , HQ SEDAN AND WAGON , CORTINA , VALIANT AND SO MANY MORE SO THERE IS SOMETHING FOR EVERYONE. IN ON OF OUR VIDEOS I PRETTY MUCH WENT TO HEAVEN FINDING A WRECKING YARD / JUNKARD WHERE THERE WAS EVERYTHING YOU COULD DREAM OF INCLUDING A MONARO , CHARGER , VALIANT PACER , A FALCON COUPE , TORANA , CADILLAC , SOME CHEVY'S EVEN SOME JDM CARS LIKE DATSUN , NISSAN SKYLINE , MITSUBISHI SCORPION BUT IT DIDN'T STOP THERE EVEN 4X4 LIKE A HJ 45 TOYOTA LANDCRUISER AND A 60 SERIES WAGON . I REALLY HAVE NO BIAS I LOVE RESCUING THEM ALL SO DO STICK AROUND AS YOUR BOUND TO SEE SOMETHING YOU LIKE. CHEERS FOR TAKING THE TIME TO WATCH . MICK

Комментарии • 703

  • @johnlucas5561
    @johnlucas5561 16 дней назад +2

    Hi Mick, love your channel I am 82 Aussie living in Chiangmai Thailand the best Aussie content by far.

  • @lodestone69
    @lodestone69 Год назад +20

    I watch all of the fancy Aussie car channels, but I get so excited when a new Back Shed episode comes up in my notifications. It truly has to be my favourite. You truly are a living legend Mick and love your love for all old Aussie cars, especially those that have been left for dead by others. The Falcon Ute is beutiful and you're right, a sweet little 289 Windsor in her would just be the best. Keep up the awesome work, mate. I look forward to the next episode.

    • @backshed5295
      @backshed5295  Год назад +4

      Ya way too kind James, I really appreciate ya saying mate thanks made my week. I love finding old junk and getting it to a point where it’s got a second wind. Thanks mate and stick around as there’s heaps coming mate from all brands . 🍺🍺👍

    • @EnviXR81
      @EnviXR81 9 месяцев назад +2

      Ditto

  • @andrewmonaghan8487
    @andrewmonaghan8487 Год назад +12

    Love the body lines of the old Falcons, running down the side and around the tail lights , she's a keeper, always wanted one , 👍

  • @lffit
    @lffit Год назад +7

    I come from this generation, used to sell them in fact right from the very first Falcon, the XL had a beefed front end suspension, I still remember the name of my first customer.
    From this generation the XM was my favourite model, having a tighter and better handling body, the Ford slogan of the time was 'Certified Golden Quality' amazing for me to find your channel, as I now live so far away from OZ.....
    Thanks!

  • @glenncarr2121
    @glenncarr2121 Год назад +7

    The reason you have vacuum lines going to the fuel pump is , the car has vacuum accessories like windshield wipers and HVAC that is vacuum operated on a lot of them and the fuel pump makes more consistent vacuum than the engine does ! I hope this helps you in the future and I look forward to seeing more of your shows 😊

  • @TigerRogers0660
    @TigerRogers0660 Год назад +18

    What a find!! The body is so straight & nearly rust free. And even the grill looks near perfect!! You don't find many XL utes in this condition. I hope it gets a full restoration.

    • @backshed5295
      @backshed5295  Год назад +4

      You never know mate 1 step at a time always forward👍🍺

    • @chilee6994
      @chilee6994 Год назад

      I wonder if the car has papers??. Not sure how it works in that country far as registration and ownership

    • @marconi-id7tf
      @marconi-id7tf Год назад +1

      here in Australia he will have a receipt from the wreckers he brought it from.
      These are the only proof of ownership required to get it registered. Various states have different requirements for proof of roadworthyness and insurance requirements. ( some are easy some are not )
      But chasing titles is not a thing here.

  • @johncavar2914
    @johncavar2914 Год назад +23

    Your dedication to detail is exemplary..explaining probs with fuel ⛽ tank ..and rescuing it ..work alone ..your plan to save it ..mate this is better than watching a hit streaming show Netflix..work detail is amazing ..U deserved every beer 🍺 after ur hard day work getting this video out .

  • @zacanderson472
    @zacanderson472 Год назад +11

    This will be the first one i watch without a beer lol (8am). 😂

    • @backshed5295
      @backshed5295  Год назад

      Hahah yep 🍺👍

    • @craigdawson1749
      @craigdawson1749 Год назад

      Poor form it's lunchtime somewhere, get one into ya!

    • @backshed5295
      @backshed5295  Год назад

      It’ll be the worst video you’ve watched for that single reason Hahhaha🍺🍺👍

  • @testy518
    @testy518 Год назад +5

    You do great work, but I think I'd have rebuilt that carb about 5 steps ago!!

    • @backshed5295
      @backshed5295  Год назад

      Hahaha yeah it was always going to happen hahahaha, I let it go for a bit as I’ve had ones before that came good with a little running. Cheers for watching mate🍺👍

  • @adelaideinvigilation5230
    @adelaideinvigilation5230 Год назад +9

    That tool you found is to remove rubber hoses from things like radiators, fuel lines, water lines.
    That ute is the same model and colour as we had on the farm just needs a bench seat

    • @backshed5295
      @backshed5295  Год назад +2

      Yeah right I can see that now , to put down the side of a hose to unstick it 🍺🍺👍

    • @garymarcucci12
      @garymarcucci12 Год назад +4

      I have one I've used it for over 35 +years
      I'm pretty sure You'll find out that it comes in pretty handy removing most hose clamped type hoses it will save you from a lot of twisting and pulling to break the seal

    • @backshed5295
      @backshed5295  Год назад +3

      Cheers mate🍺🍺👍

  • @ianarmstrong8826
    @ianarmstrong8826 Год назад +11

    Another bloody good episode Mick. Love the way the old falcon just started up and no smoke, love the wheels on it too .
    Cheers mate

    • @backshed5295
      @backshed5295  Год назад +1

      Cheers Ian yeah that was 1 I was confident of then way not confident of then surprised it idled almost straight away. Hahhaha 🍺👍

  • @philipwest2091
    @philipwest2091 Год назад +5

    Nice one mate! Full credit for saving the old Ute. Keep up the good work mate, enjoyable as always 👌

    • @backshed5295
      @backshed5295  Год назад

      Cheers Philip I appreciate ya saying mate 🍺🍺🍺👍 she ain’t done yet

  • @gman9035
    @gman9035 Год назад +3

    This has become my favorite revival vlog. Watching from the states

    • @backshed5295
      @backshed5295  Год назад

      Cheers G man , please share it around over there mate 🍺👍

  • @johnkendrick7304
    @johnkendrick7304 Год назад +2

    Those tires and wheels look absolutely perfect for that thing

  • @MurrayRichardson-pp3qr
    @MurrayRichardson-pp3qr 7 месяцев назад +1

    My dad had a wagon version of this model after he crashed the earlier XK wagon. He was a shearer and travelled many many miles on back roads of NSW and Qld. It was better than the Holdens in wet flooded areas and seemed to go forever. I have wanted to get one to resurrect for years.
    Good job mate.

    • @backshed5295
      @backshed5295  7 месяцев назад

      Cheers mate for watching🍺👍

  • @donstaunch7895
    @donstaunch7895 Год назад +2

    Amazing find. More amazing it started and ran so well! Give that old girl a full restore. She deserves it.

  • @leonsinner7494
    @leonsinner7494 Год назад +2

    Ha! That spare wheel extraction went exactly like the one on an old XM ute I did years ago. Had a petrified rat in there too. Good times!

    • @backshed5295
      @backshed5295  Год назад +1

      Hahah yeah I feel ya pain hahaha. 🍺🍺👍

  • @jackwilson8651
    @jackwilson8651 Год назад +2

    Love those XK, XL, XM and XPs. Beautiful cars, particularly the coupes and utes. Bugger all around though

  • @Moosaroo
    @Moosaroo Год назад +1

    The patina on that rig is perfect.

  • @JAStheACE
    @JAStheACE Год назад +7

    That was fun. Imagine a bird loitering around your shed looking at a Falcon. Good job Mick. the old bird looks ok for it's age.

  • @GODEES77
    @GODEES77 Год назад +6

    I’m glad this channel popped up in my suggested videos. I love it, keep up the good work Mick

    • @backshed5295
      @backshed5295  Год назад

      Cheers mate welcome aboard 🍺🍺👍

  • @runtdegroot
    @runtdegroot Год назад +3

    Mate. Enjoy the channel and you have some great tips. How do you degas the fuel tank for welding ? Interesting about the acid to get rid of rust..
    Those old Ford sixes are the bomb. Me mum had a the XM 170 Super Pursuit and a mate the 144 in a wagon. Solid
    lifters, no syncro on first. 5 turns lock to lock on the huge steering wheel. Good brakes. Those donks will not die. Get into it. That motor will come up sweet with a good flogging. Exhaust manifold cast as part of the head stopped them getting molested. Never as smooth as a Holden red, as you noticed.
    But. I have to confess. I was watching you trying to get and keep it running. I was thinking.... Why is he not using the
    choke? It seemed to be connected. Sorry, but I was shouting at the screen. Use the choke, use the choke !!! 🙂
    Yep.. .the clutch is knackered. Starter a bit sad. But I like those wheels. Windsor in those have been done. I reckon a bit of rust repairs and a bit of paint and she would be a great shop truck. On a fine day. Those vacuum wipers get old very quickly. I think the later models had electric ones? Retro fit?
    Anyway... enjoy the channel, and it good to see some old tin get back on the road.

    • @backshed5295
      @backshed5295  Год назад +1

      Cheers mate I appreciate ya watching
      As far as degas mate I generally acid first then water then weld but this one I just flushed water then started cutting because it was that bad the acid wouldn’t have stayed in it long enough to clean it hahah . As for the choke yeah I guess I could have used it by disconnecting the cable ( cable seized) but it was a 30degree day and I was probably more watching the lack of accelerator squirter and the vac leaks but hey that’s what happened on the day hahah🍺👍

  • @KiwiStag74
    @KiwiStag74 Год назад +5

    Hey Mick. You know, I'm no Ford bloke, but boy would I have jumped at that one myself had I been there and seen it. Reason being that - as you said - she was so complete (and untouched) under the bonnet and the lower half of the car was so well intact and obviously not full of poo, so she was obviously a bloody good contender and well worth giving a second chance at life.
    I'm also a sucker for that era Falcon with their rounded nose, little fins, body lines and the shiny dress mouldings that just highlighted them. I love the dual-circle tail lights as well, although that XL has a bit of a Marty Feldman thing going on, eh! I much prefer that generation over the XR to XY era as the earlier ones had more detail, but that 2nd generation had some good lookers amongst them too.
    She's a great little project, mate - and I commend you chucking them modern seats as far from it as you can! I reckon even my 5'9" frame would have had trouble squeezing in there. Modern seats are good if the look fits and they are generally better at holding you in one place, but those didn't suit and it's pointless having seats that won't let you get in and drive the beast, eh. If that little six is still strong - and it seems like it is - it seems a bit of a waste to me to pull it and sit it to one side in favour of a wee eight. Sure, a 260 / 289 / 302 would give it the right sound for those wheels and make it more appealing to a wider group of people to maybe sell it to, but that ol' 170 cube six and three-on-the-tree seems more fitting to me because it still works so well.....albeit with a noisy thrust bearing. Reckon she'd stand a cam swap and a bigger carbie just to liven her up a bit??!
    (As a side note, I had a noisy thrust bearing in a car that had sat for years too. When it was making the noise, the car used to be difficult to select gears and would creep while in gear and the clutch fully depressed. After a couple of thousand miles, it shut up for about 90% of the time and after 5000 miles it made no sound at all....and yes, things still worked as they should. A mate of mine had been harping on at me to change it, but I did 30,000 miles in that thing without a problem before I sold it. My advice is to give it a bit and see if she shuts up on her own. What's the worst that can happen?)
    Looking forward to seeing more on this old girl when things come together to make it possible. All the best.

    • @claztube
      @claztube Год назад +1

      Love the story here and your insight too.

    • @backshed5295
      @backshed5295  Год назад +1

      Cheers Lance yeah I reckon there’s other more important things to work on than the clutch bearing at the minute so I’ll take your advice and just let it do it’s thing for a bit haha🍺🍺👍

    • @backshed5295
      @backshed5295  Год назад

      🍺👍

    • @xbgtfella
      @xbgtfella Год назад

      History of the world

    • @KiwiStag74
      @KiwiStag74 Год назад +2

      @@xbgtfella - Sorry mate. Did I strain your brain with all those words? Better go have a lie down then, eh.

  • @rossmuller9815
    @rossmuller9815 Год назад +4

    Great work Mick. Had me smiling all the time. What with you your commentary and seeing the success of getting the old girl going. Looks like powder blue with a few spots of sunburn. Already looking forward to the next instalment.

    • @backshed5295
      @backshed5295  Год назад

      Cheers Ross thanks for coming back for another video mate 🍺🍺👍

  • @purpleemeraldloungebar1445
    @purpleemeraldloungebar1445 8 месяцев назад +1

    Great video. Just love the old fords. My dad had an XM falcon. Enjoying your vids. Thanks Mick

  • @simcard027
    @simcard027 3 месяца назад +1

    another great vid
    love seeing these old girls get saved

  • @ScootersTransportVids
    @ScootersTransportVids Год назад +3

    What a great find. Nice work saving it from the graveyard. Don’t see many in such good condition anymore.

  • @BenMitro
    @BenMitro Год назад +1

    Full metal jacket on the top of the tank, nice one!

  • @johnpartridge7623
    @johnpartridge7623 Год назад +3

    Good job on saving another Classic Mick, I wonder if somebody Jacked the Car up using the Sump?

    • @backshed5295
      @backshed5295  Год назад

      I’m guessing something like that mate🍺🍺👍

  • @johncavar2914
    @johncavar2914 Год назад +2

    Straw inside it ..chooks be laying eggs 🥚 in it ..amazing ford ute never the less ..I love the old style Ford retro tail lights ..they are so cool 🎉

  • @reihanawitana7634
    @reihanawitana7634 Год назад +2

    Mate just love you videos, not only do you know what your talking about but your very clever, and funny as! Luv it!

    • @backshed5295
      @backshed5295  Год назад

      Haha I don’t know about funny mate it’s more stupid hahahah
      But seriously thanks for watching mate🍺🍺👍

  • @shanestachurski9667
    @shanestachurski9667 Год назад +2

    Well mate shes a good find. And i like the way she didnt want to rev early. We dont want to sprint straight after a sleep. We wait til our bodies warm up abit b4 going hard out lol.

  • @adamlucas7949
    @adamlucas7949 Год назад +1

    Thanks again mick looking forward to see what you get up to with this one.
    Piss funny bloopers 😂

    • @backshed5295
      @backshed5295  Год назад +1

      Hahaha yeah I get heaps of people saying they love bloopers , me stuff up and being a dick Hahhaha . Im just doing what I do Hahha 🍺🍺🍺

  • @paulroberts2302
    @paulroberts2302 8 месяцев назад +1

    That car is so over the top cool I can't take it! I'm super jealous, I rarely find anything like that here in the States and if I do they are all so overpriced. Can't wait to watch more content on this one. GREAT JOB!!

  • @johnlawton5534
    @johnlawton5534 Год назад +2

    Hi Mick, I think your ute has vacuum wipers and that pipe you mentioned probably feeds the wipers. Really good find not much to do after all. the bearing noise operating the clutch will as you suggested will be the throw out bearing. Keep them comming...John

  • @MrLurchsThings
    @MrLurchsThings Год назад +1

    So nice. I’m thinking 289 or 302 with a lazy slush box. Your classic white steelies and centre caps. Slight lowering job. Patina paint. Mint.

    • @backshed5295
      @backshed5295  Год назад

      Your onto it Lurch 🍺👍, I like your thinking.

  • @wannaseethevid
    @wannaseethevid Год назад +2

    I was siting on the bonnet of one of those (station wagon but same year) was spotter in the long grass for stumps. We were out to chainsaw some logs..........we hit a stump and I went flying! Took the three of us to lift the front off that stump. haha! Good times.

  • @romemancer7905
    @romemancer7905 Год назад +2

    Spent my young years rescuing early falcons from farms tips and wrecking yards around melbourne...Love these old cars and would do it all over again...cheers to a great video buddy...My XL had a 289 windsor and toploader...they were made for V8 swaps...this cars in good hands !!!

    • @backshed5295
      @backshed5295  Год назад

      Thanks mate and yeah I agree on the “made for engine swaps “ 🍺👍

  • @raypayne2228
    @raypayne2228 Год назад +3

    Genuinely good stuff, you have a knack of matching cars and wheels, it has its best mod before it left the trailer!

    • @backshed5295
      @backshed5295  Год назад +1

      100% mate . We’ll see where this one takes us 🍺🍺👍

  • @kenanger6877
    @kenanger6877 Год назад +1

    Pretty good video!
    Like all the birds going at it!
    Watching your video and my parrots were going ape shit! 😂

    • @backshed5295
      @backshed5295  Год назад

      Hahaha yep we have a fair bit of wildlife here hahah👍👍🍺

  • @markbehr88
    @markbehr88 Год назад +3

    Great find. I wouldn’t clear coat it. That looks kind of fake to me. The wax is a better option. Btw that little rectangular Ford badge goes on one side of the lower front mudguard. If you google a 1963 Ford Falcon XL brochure you will see it. Well done on bringing it back to life.

  • @brettsalter3300
    @brettsalter3300 Год назад +6

    When I bought my first car (XL Falcon, with a beautiful hood ornament to boot) I had really wanted the ute, the dashboard had two tiny plastic silver ornaments to distinguish the petrol and temp gauges, hence your holes in the plastic facia. Also loved the colour names they had for these models interiors, Koala grey, Pacific blue, Waratah red, Wattlebark Tan etc. So good to see you bring this one back to life. On ya.

    • @backshed5295
      @backshed5295  Год назад +2

      Cheers Brett thanks for watching mate , I do love the memories old car bring with them. What colour would mine be? 🍺👍

    • @brettsalter3300
      @brettsalter3300 Год назад +2

      @@backshed5295 I think the colour is called Starlight Blue. Good luck with future restoration/ preservation.

    • @backshed5295
      @backshed5295  Год назад +1

      Cheers mate

    • @claztube
      @claztube Год назад

      @@brettsalter3300 Thanks Brett, those color names are 'cool' to recollect here today in our time.
      I had thought I saw a hint of blue in the finish of this ute...

  • @philb386
    @philb386 Год назад +2

    Hi Mick that tank looks a lot like the tank in my XY ute, the filler neck was on the opposite side because the sender faces the rear. Those tank halves are the same maybe you could reposition the filler and sender openings, turn it upside down and make a new lid, if the top was any better. If it all turns to shite get an ally one made job done. Good luck, Cheers from NZ, Phil.

    • @backshed5295
      @backshed5295  Год назад

      Cheers mate yeah I’ll cook up something haha🍺👍

  • @simonasquith840
    @simonasquith840 4 месяца назад +1

    Just found this channel,love your work Mick,and sense of humour,hilarious when you called yourself a dickhead for not realising something you missed. 😂😂

    • @backshed5295
      @backshed5295  4 месяца назад

      Hahaha cheers mate 🍺🍺👍

  • @davidfinkelstein7986
    @davidfinkelstein7986 Год назад +3

    It was very refreshing watching someone from a different continent go through the same issues and triumphs as every other car buff world wide. That ranchero is on my wish list. I hope you have fun with it.

    • @backshed5295
      @backshed5295  Год назад

      Cheers David thanks for watching mate and please share the videos with your groups abroad for me 🍺🍺👍

  • @englishandthebeautyoflangu3610
    @englishandthebeautyoflangu3610 Год назад +4

    Backshed is a top channel. Thanks for taking the trouble to share these stories. Love the merch. I'm leaving this comment here and wish you fine weather and happy trails.

    • @backshed5295
      @backshed5295  Год назад +1

      Cheers mate and if you bought merchandise thanks twice hahah but seriously I do appreciate it as these old girls ain’t free and I’m dumping heaps of $ into new cars that are coming soon so cheers for the support 🍺🍺🍺🍺👍

    • @englishandthebeautyoflangu3610
      @englishandthebeautyoflangu3610 Год назад +1

      @@backshed5295 Yeah mate, I got a cap and stubby holder and putting both to good use. I know you put a lot of work and cash into these shows and you've got a winning formula I reckon. The chats and demonstrations, tunes and general vibe very enjoyable. Look forward to the next one! Cheers

  • @scottbennier1335
    @scottbennier1335 Год назад +3

    Sad to see so many projects, never be !!! …… but you do a great job saving what you do. Love the old XL Ute , love to see more of it. How’s the arm wear on the drivers side door, reminds one of the days when every self respecting boy from the country had his elbow out the window. Cheers and Beers Mate 🍻🍻🍻🍻

    • @backshed5295
      @backshed5295  Год назад

      Yeah that drivers door patina is perfect 🍺🍺👍

  • @BadApe351
    @BadApe351 Год назад +2

    This video was a revelation to watch. Just goes to show that you can bring something classic back to life when it seemed well and truly dead sitting in that car boneyard. You are really doing a great service in resurrecting these tarnished gems.
    And that trick with the starter motor...you wouldn't believe it...I had to try for the first time on my XD this morning when it decided not to turn over. I used to do it years ago on an XC so I gave it a shot. Started straight away! And a few hours later here you are explaining it to the viewers😀

    • @backshed5295
      @backshed5295  Год назад +1

      Hahahah yeah pretty common once they get a few years on them🍺🍺👍

  • @noelroberts8199
    @noelroberts8199 Год назад +1

    I love your enthusiasum, I would have given up along time ago, Power to you..........

    • @backshed5295
      @backshed5295  Год назад

      Cheers Noel I appreciate you watching mate 🍺👍

  • @randyhoy9692
    @randyhoy9692 4 месяца назад +1

    Congratulations on the good engine 😊

  • @gearheadindustriesmedia6890
    @gearheadindustriesmedia6890 Год назад +1

    Great episode legend..
    your starting to get the old wrecking yard pre start dialed..

    • @backshed5295
      @backshed5295  Год назад

      Unfortunately I didn’t get to start that one out there it just got winched on but maybe next one 👍🍺

  • @simply_stefani
    @simply_stefani Год назад +1

    Gotta love those vacuum wipers...Idlleing great, but under acceleration sometimes nothing hahaha..But what a find..

    • @backshed5295
      @backshed5295  Год назад

      100% mate stick around heaps more coming 🍺👍

  • @shanebadman6727
    @shanebadman6727 4 месяца назад +1

    Wow, just discovered your channel, i have some watching to do now... Nice Falcon, last year i pulled an 1968 xt Ford Falcon ute out of the scrub from a friends station. 3 hours of towing through the malley scrub at 60km/hour and i hit bitumen. Farmers used to take the radiators out, as in the scrub that is the first thing stolen. 3 days later the farmer dropped off the radiator and told me it was running around 20 years ago. My XT ute is in a very similar condition to yours but has a few bullet holes and a roo shooting platform. I am tempted to get it roadworthy again with a scrub and maybe a clear coat to retain the patina. I am now so inspired!!!

    • @backshed5295
      @backshed5295  4 месяца назад

      Excellent to hear mate 🍺🍺👍

  • @user-du8cs8sn2v
    @user-du8cs8sn2v Год назад +2

    The tool you found in the door is a radiator hose removal tool. Love the vids:)

  • @petersutton7033
    @petersutton7033 9 месяцев назад +1

    Just finished a 63 great job

  • @backshed5295
    @backshed5295  Год назад +2

    backshed.net.au/
    Hey can’t thank everyone enough for watching and the comments , I really do love this junk and ya’s make me want to work harder to get stuff / new episode up quicker . Cheers people 🍺🍺🍺🍺👍

  • @malhayes4725
    @malhayes4725 4 месяца назад +1

    Those wheels look cool.

  • @steveblack1753
    @steveblack1753 Год назад +1

    She’s a sweet looking car mate , just love it! Good on ya 🤙🤙🤙🤙

  • @georgewinters3191
    @georgewinters3191 10 месяцев назад +1

    My first car was a 63 XL Falcon with a 170Pursuit motor. It was about 10 years old when I got it. When you wondered what that second vacuum line was for I was trying to tell you “ for the wipers”. I remember when driving in the rain if you put your foot down the wipers would nearly stop and as soon as you took you foot of the accelerator the wipers would go mad fast 😂😂. My sedan was the same blue with a white top , was a great first car, I graduated to a 68’ Monaro GTS after that . Thanks for the memories. Look forward to seeing what you do with it .

    • @backshed5295
      @backshed5295  10 месяцев назад +1

      That’s half the fun mate isn’t it , the memories! 🍺🍺👍cheers mate🍺

  • @shaindaman13
    @shaindaman13 Год назад +1

    My Aunt’s first car was a white 63 saloon Falcon. When I was about 3 or 4 I found a nice can of red barn paint and proceeded to go to work on the passenger side. Good times

  • @damienhasleby8390
    @damienhasleby8390 Год назад +5

    Hey Mick, as someone else mentioned you can get fuel tank restoration/sealer kits. KBS and POR15 both do a good one, the sealer dries to a hard ceramic coating and will fill any small pinholes. Have used them myself with good results

    • @backshed5295
      @backshed5295  Год назад

      Cheers mate I’ll look into it🍺👍

  • @ronnieboucherthecrystalcraftsm
    @ronnieboucherthecrystalcraftsm Год назад +2

    super fantastic choice = i saw one 50 y ago torquise with all mustang emblems 4 wheel disc`s big locker diff 289 hipo quad webers 4 speed - dripping with chrome and paint ! wish i was rich .

    • @backshed5295
      @backshed5295  Год назад

      Cheers Ronnie thanks for watching mate🍺👍

  • @bryansean6465
    @bryansean6465 Год назад +1

    Ah sunday morning and an episode of Backshed Mick. Perfect👍👍

  • @timta50ylor
    @timta50ylor 6 месяцев назад

    Great show! Well explained and interesting to follow. Good to see old engineering brought back to life.

  • @stew6338
    @stew6338 Год назад +2

    Okay let's go. Firstly I was going to say vacuum wipers but you answered you own question. Secondly now I wish I had have told you to use solder to repair the fuel tank back when I watcher the HQ episode. 3rd.. If your going back to the wrecking yard to get the seat get the fuel tank too. It might be okay or make one out of the two. Cheers Stew

    • @backshed5295
      @backshed5295  Год назад +2

      Hey stew yeah I hear ya mate , I don’t give up real easy mate but solder or weld that tank is beyond me. It started with a few then the more I moved it and cleaned it the more holes opened it’s paper thin 😞. As for wipers yep I learnt something new 🍺🍺👍

  • @lowmopar265
    @lowmopar265 Год назад +1

    Luv it my dad had 1 when i was a kid.

  • @Loatsofdetail
    @Loatsofdetail Год назад +1

    You do a amazing job this one is coming up clean

    • @backshed5295
      @backshed5295  Год назад

      Stick around mate there’s heaps more coming 🍺👍

  • @paulsgarage3169
    @paulsgarage3169 Год назад +5

    You should change your channel name to "The Lucky Backshed". I can't believe the number of wrecking yard cars you buy and get started. Love this type of content, keep it coming.

    • @backshed5295
      @backshed5295  Год назад +2

      Cheers Paul yeah I’ve been getting some good ones . More coming mate.🍺👍

    • @GODEES77
      @GODEES77 Год назад +1

      I bet you the bloke wishes he asked more $ now

    • @backshed5295
      @backshed5295  Год назад +1

      He’s a pretty fair guy on $, probably helps I bought 6 cars from him. Not cheap but not crazy $ either just fair $ for fairly good ( not rust buckets) cars.🍺👍

  • @davewortho
    @davewortho Год назад +2

    Love it. Great work. The wheels look pretty good to be honest.

    • @backshed5295
      @backshed5295  Год назад

      Yeah I don’t hate them mate 🍺👍 just gunna go with it hahhaha

  • @rogerb4436
    @rogerb4436 Год назад +2

    Dude, love this old ute mate and have to say thanks for rescuing it. Hopefully you finish it fully as it deserves it. Sounds awesome and how many modern cars would idle like that after sitting all those years...lol

    • @backshed5295
      @backshed5295  Год назад +1

      Cheers Roger I appreciate ya saying and watching 🍺👍

  • @benjaminsanchez1456
    @benjaminsanchez1456 Год назад +1

    That noise is absolutely the release bearing the same thing happened on my 65 C10 so I replaced the clutch and all the components

  • @gravesendaustralia
    @gravesendaustralia Год назад +1

    THANKYOU for an entertaining video

    • @backshed5295
      @backshed5295  Год назад

      Your most welcome mate👍🍺🍺 thanks for watching mate

  • @derek7676
    @derek7676 Год назад +1

    Another great video Mick. 🇦🇺

  • @timsutterby9899
    @timsutterby9899 Год назад +1

    What a ride! If it were over here in the states I've got a sweet 302w that would make it go real fast . Keep up the good work

  • @chilee6994
    @chilee6994 Год назад +1

    I sure like that power washer you have..

    • @backshed5295
      @backshed5295  Год назад +1

      Best tool for old junk! Hahah 🍺👍

  • @KenthGustafsson300
    @KenthGustafsson300 11 месяцев назад +1

    My swedish 60 falcon has a plate under the carburator that runs cooling water instantly to warm up.

  • @markmathews206
    @markmathews206 Год назад +2

    That looks nice good job 👍🍺

  • @kutunuikunikuni1301
    @kutunuikunikuni1301 Год назад +1

    That tool is a hose remover....although I use it for everything .....from pulling Orings to scribing.
    Good for unsticking radiator hoses.

  • @CJ-yb8uw
    @CJ-yb8uw 10 месяцев назад +1

    New shoes and it’s away😎✌️👍

  • @angryyank
    @angryyank Год назад +2

    The vacuum line on top of the fuel pump is used for the wiper assembly on your windscreen

  • @stevenjohannesen88
    @stevenjohannesen88 Год назад +1

    Unreal, you can’t kill an old falcon , they just keep going. Great Vlog, ❤️🦘🦘🦘

  • @brettgeisler3065
    @brettgeisler3065 Год назад +1

    Nooooooo…. Where’s me commodore? 🤣 hooked on your vids, as an avid car enthusiast 20plus years ago and stopped for life.. I’m getting right back into it and LOVIN it now with RUclips on our side 👍 well done

    • @backshed5295
      @backshed5295  Год назад +1

      Haha commodore is up soon mate🍺🍺👍

  • @colinrobb3962
    @colinrobb3962 Год назад +1

    My second favorite Falcon after the XE. So glad you saved her

  • @robertmcintosh4675
    @robertmcintosh4675 Год назад +1

    Cleaning carbys is easily done with general purpose thinners, removes varnish and crud and leaves the alloy really clean

  • @johnathoncarroll8927
    @johnathoncarroll8927 11 месяцев назад +1

    Hey mate,recently discovered your'e channel,you are a fucking genius! Iv;e had dozens of old Holdens ,Fords, Vals and other assorted clunkers in my time, all power to you,keep going, cheers!

    • @backshed5295
      @backshed5295  11 месяцев назад +1

      Cheers mate thanks for saying 🍺🍺👍

  • @dylanwhite1212
    @dylanwhite1212 Год назад +1

    One man's trash is another man's treasure, absolutely loved seeing this old gem come back to life love your work mate 👍🍻

    • @backshed5295
      @backshed5295  Год назад +1

      Yeah it wasn’t that long ago that these old cars were worth nothing , thankfully the place I found them Didnt just crush them. She’s getting another go at it hahaha. The Xl will be back soon. 🍺👍

    • @dylanwhite1212
      @dylanwhite1212 Год назад +1

      @@backshed5295 always looking forward to future videos mate, keep up the good work 🤙

    • @backshed5295
      @backshed5295  Год назад +1

      Will do mate👍

  • @johnwitte551
    @johnwitte551 9 месяцев назад +1

    looks quite good on those wheels actually

  • @DoonerF
    @DoonerF Год назад +1

    I want to see more of that Falcon Ranchero.
    I have a’61 Falcon Sedan. It has a ‘65 200 (3.3) and runs great. I plan to pop a Holley Sniper on it soon.
    Great job mate!!!!!

    • @backshed5295
      @backshed5295  Год назад

      🍺👍

    • @DoonerF
      @DoonerF Год назад +1

      @@backshed5295 Hey mate! I didn’t catch what size those tires and rims are. Would you mine letting me know? Those look awesome. Really changed the look.
      Wheels on my Falcon are too tiny for my liking.

    • @backshed5295
      @backshed5295  Год назад +1

      Rim size is in the start of the video but tyres are 235/35-18 and 215/35-17

    • @DoonerF
      @DoonerF Год назад +1

      @@backshed5295 Sorry. I don’t hear so well.
      I was hoping I could make a 215/50/18 fit all four, then lower it slightly. First thing I need to do is get rid of the four lugs and change to five.
      Thanks for the info.

  • @Andrew-jh5uv
    @Andrew-jh5uv Год назад +1

    Jesus watching these vids has me looking at my Dads VY, extractors new alternator, brake upgrade and no im not having a moment with myself 😂 enough talk get stuck in...

    • @backshed5295
      @backshed5295  Год назад

      Hahaha yep less talk mate hahah🍺🍺👍v6 or LS VY ?

    • @Andrew-jh5uv
      @Andrew-jh5uv Год назад +1

      @@backshed5295 the mighty 3.8 ecotec 350k's zero oil consumption pulls like a train all day but those brakes I go down the Clyde Mountain and end up having to call Repco halfway for new rotors they are shite... a set if 18in Rims and 330mm rotors etc incoming

  • @sonnypena194
    @sonnypena194 Год назад +1

    All the early 60’s 200ci I always used a manual chock cable.

  • @clivemcquade8410
    @clivemcquade8410 Год назад +1

    Great show bud love the restos

  • @joeruanuku9325
    @joeruanuku9325 4 месяца назад +1

    The old Holden HQ ute.
    Keep it too.

  • @julianalderson3938
    @julianalderson3938 Год назад +1

    Nice bro, patience is key there. N putin it all together like an old crime seen. Cheers nice little ute

  • @craigwhite3162
    @craigwhite3162 Год назад +3

    Yet another cracking video Mick. Looks like a lot more time and money needs to be invested in this one, but I reckon it will turn out pretty good. Cheers 🍺🍺

    • @backshed5295
      @backshed5295  Год назад +1

      Yep Craig still needs plenty of love mate🍺👍

  • @mickburns5546
    @mickburns5546 Год назад +1

    Mate. That thing is a bloody pearler. What a score.

  • @adman6380
    @adman6380 Год назад +1

    Great stuff as always Mick

  • @twinkie27271
    @twinkie27271 Год назад +1

    I don't recall my 62 Ranchero having that spare tire compartment

  • @6petrolhead6
    @6petrolhead6 Год назад +1

    Really enjoyed that mate it's always cool to rescue and old forgotten car from a scrap yard and of course she wants to live you've given her a second chance

  • @batmanlives6456
    @batmanlives6456 Год назад +1

    What a brilliant little ute !
    Great find !
    She idles like a champ , quiet and strong!
    They really are a great motor the old six cylinder falcons
    I love the patina , I would leave her as is
    It tells her story

    • @backshed5295
      @backshed5295  Год назад +1

      I hear ya mate I’d say that’s exactly what will happen🍺👍

  • @4ndy530
    @4ndy530 Год назад +1

    That's a cool old ute, definitely worth spending some time on. That fuel tank was bad! but atleast nobody got burnt! 😂👍