BRO SAME BUILD WITH 3S LIPO I WATCHED UR LION BATTERY VIDEO WHAT WILL BE BETTER 11.1 V 3S LIPO (CURRENT LY USING) SHOULD I UPGRADE TO 8000MAH LION BATTERY DOES LION WORK FINE OR SHOULD I GET LIPO
If you are asking my opinion then I will recommend you to use li ion batteries Yes you can make 8000 mah battery pack . I will post another video on li ion So, do subscribe for getting more about it 😊✌
Yes I used 11.1V 2500 mAh li ion battery pack Making of that battery pack video link is in the description box And it's flight time near about 15 mins If you attach another battery pack of 11.1v & 2500 mah pack in paralla connection then you can get minimum 1/2 hours flight time
thats an awsome thing. my question: ardupilot wiki says to do the tuning part before first flight. but ur quad still seems so stable without tuning and also with default params....how come? did you miss to show something? i also have same setup but in my case the quad leaves ground at 3% throttle (it should be around 50%) and also it drifts to one direction and not straight up like yours. im using 8038 props, 980kv motors and 1300mah 3s lipo and same ESCs you are using. esc/radio/compass calib all done. can u share ur param file?
hello. I hope you can give me urgent instructions I did everything like you, but a problem appeared: when testing the motor on ardupilot, I set it to level 5 and only 2 motors rotate. At level 15, the remaining 2 motors rotate
In actual testing, when starting, only 2 engines rotate at the same speed. When you pull the throttle strongly, the remaining 2 engines will rotate. Please give me the solution. I need it urgently. Thank you
What is the flight time of your drone
20 min
Good vai
Thanks 😊
I WILL BE USING THIS ALSO IF I USE 3 CELLS OF 2400MAH THEN BATTERY WILL BE CALLED 2400MAH OR 2400X3 MAH
?
It will be called 2400 mAh
BRO SAME BUILD WITH 3S LIPO
I WATCHED UR LION BATTERY VIDEO WHAT WILL BE BETTER 11.1 V 3S LIPO (CURRENT LY USING)
SHOULD I UPGRADE TO 8000MAH LION BATTERY DOES LION WORK FINE OR SHOULD I GET LIPO
If you are asking my opinion then I will recommend you to use li ion batteries
Yes you can make 8000 mah battery pack .
I will post another video on li ion
So, do subscribe for getting more about it 😊✌
Did u use those li ion cells which u made Pls say the flight time of the quad
Yes I used 11.1V 2500 mAh li ion battery pack
Making of that battery pack video link is in the description box
And it's flight time near about 15 mins
If you attach another battery pack of 11.1v & 2500 mah pack in paralla connection then you can get minimum 1/2 hours flight time
Can I use Samsung li ion cells
@@sdtech_20 can u give ur whatsapp number pls
Orange li ions are better than samsung li ions
Give me your Gmail I will forward my wp number there
Is it good to use li - ion battery in drone ? Please tell me , because I have heard that it gives longer flight time as compared to li - po battery
Yes!
At first check the c ratings of that battery
Then use it
Cam we use FS CT6B transmitter for apm2.8
No problem but you can't change modes by it
@@sdtech_20 bro but can we change mode by using knob of channel 5 and 6
@@anurag5874 yes you can but it quite difficult to change it
@@sdtech_20 thank you bro , i am going to suscriber your channel🥰🥰
@@anurag5874 thnx bro❤
Don't forget to press the bell icon 😊
Darun to
Time kore wp er msg ta dekho
thats an awsome thing. my question: ardupilot wiki says to do the tuning part before first flight. but ur quad still seems so stable without tuning and also with default params....how come? did you miss to show something? i also have same setup but in my case the quad leaves ground at 3% throttle (it should be around 50%) and also it drifts to one direction and not straight up like yours. im using 8038 props, 980kv motors and 1300mah 3s lipo and same ESCs you are using. esc/radio/compass calib all done. can u share ur param file?
Are you using gps on your quad?
@@sdtech_20 yes im using G-Model ublox new compass/gps and configured that with apm2.8
@@1979zeesh look, after adding Gps my drone is also not stable than previous.. After going in air it started shaking
My quad drifts off in one direction after take off.... Any solutions?
Bro how to solve flip on takeoff apm2.8 hexacopter drone
Place the black fome on the barometer properly
Meri esc calibration nahi ho rahi hai continue beaping problem AA rahi hai
hello. I hope you can give me urgent instructions
I did everything like you, but a problem appeared: when testing the motor on ardupilot, I set it to level 5 and only 2 motors rotate. At level 15, the remaining 2 motors rotate
In actual testing, when starting, only 2 engines rotate at the same speed. When you pull the throttle strongly, the remaining 2 engines will rotate. Please give me the solution. I need it urgently. Thank you
Nice editing ..
😁😁😁