Extremely useful! Wet dirt got into the vacuum while cleaning up during Hurricane Ian and created a "smells like dog" in my V8's interior. Purchased new external filters, but wasn't until I disassembled the interior and soaked (in Efferdent) that large chunks of congealed dirt came out. Video provides road map to take apart and put together as much as needed. Thanks!!
Thank you, your video helped me a lot in reassembling my Dyson v7 - the hatch was in the Close position and I couldn’t figure it out until I saw you demonstrating it!
Thanks heaps. I recently moved into a townhouse whose previous tenets had two dogs and the air coming out of my dyson v7 origin smelled like wet dog. Teared down the while thing gave it a good blast of air and wiped with disinfectant. Works like new and no smell.
Thanks for showing how to disassemble the filter, everyone else was using flat head screwdrivers and to pry up the edge, really denting up the plastic. I knew there had to be a better way
Thanks so much for this video. The card trick was awesome and with some difficulty, helped me to open up my heinous-smelling vacuum! I was ready to buy a new one but this video saved me quite a bit of money!
Thanks for this! Good tear down video. Despite the “Animal” moniker, I find my Dyson can’t stand up to our three Bernese Mountain Dogs without a regular cleaning. This video was instrumental in keeping it going!
The card trick is what I was missing, thanks for that! Although instead of a card a I cut a pieces of a plastic folder so it would be a little more structural. Great video
How do I separate red ring from the container? Need to clean the area around grey flap that's inside of the grey bin spout. Two screws are out, but what do I do next? Seems stuck together...
What torque sizes do we need? Also can I soak the inner core...after I was able to use the cards & remove the filter @8 minutes into your video... I wanted to clean it thoroughly but unsure if there is anything electrical to worry about...much obliged for your video & support GREAT ONE!
@@OpenMeUpTec At 13:52, the part that's facing the camera -- in my Dyson V7, there's a black gasket that sits on top of that piece. Or at least I think that's where it goes. I didn't specifically see this gasket at any other point in your video. When I reassembled everything, the filter doesn't want to sit flush anymore.. seems like the gasket is causing it to be raise about 1MM up? I don't know where else it would go though.
@@-MrMoose it is best if you can disasseble it again and watch the video. as i am not certains what is the problem. can you take a picture of this peice or find it somewhere to show me what it is.
@@OpenMeUpTec I'm pretty sure the piece doesn't exist in your video... it's made of the same material as the red gasket. I'm going to leave it alone for now, vacc seems to work fine and it's my backup anyway 😅 Thanks for the response!
Extremely useful! Wet dirt got into the vacuum while cleaning up during Hurricane Ian and created a "smells like dog" in my V8's interior. Purchased new external filters, but wasn't until I disassembled the interior and soaked (in Efferdent) that large chunks of congealed dirt came out. Video provides road map to take apart and put together as much as needed. Thanks!!
thanks for your support
Thank you, your video helped me a lot in reassembling my Dyson v7 - the hatch was in the Close position and I couldn’t figure it out until I saw you demonstrating it!
thanks for your support
Thank you, thank you, thank you! This was a simple to understand video with very clear steps. You saved my Dyson!
thanks for your support
@@OpenMeUpTec why does every sentence you say have an upward inflection, like it's a surprising question?
@@SausyGuyFinn it's an observation, not an attack, go be a snowflake somewhere else.
Excellent demonstration and I’m a 73 year old woman.
thanks for your support
Without prying with a sharp metal object. Perfect. Nice job man!
Thanks heaps. I recently moved into a townhouse whose previous tenets had two dogs and the air coming out of my dyson v7 origin smelled like wet dog. Teared down the while thing gave it a good blast of air and wiped with disinfectant. Works like new and no smell.
Thanks for showing how to disassemble the filter, everyone else was using flat head screwdrivers and to pry up the edge, really denting up the plastic. I knew there had to be a better way
thanks for your support
Thanks so much for this video. The card trick was awesome and with some difficulty, helped me to open up my heinous-smelling vacuum! I was ready to buy a new one but this video saved me quite a bit of money!
thanks for your support
Thank you! This helped me figure out the position of the little spring latch to help slide the canister assembly back in.
Very helpful and timely. I already know how to clean the prefilter and postfilter, but mine needs a deep gut cleaning.
Thank you so much for taking the time to makethis video , soo helpful, no way i could have done it alone 👌
Thanks for this! Good tear down video. Despite the “Animal” moniker, I find my Dyson can’t stand up to our three Bernese Mountain Dogs without a regular cleaning. This video was instrumental in keeping it going!
thanks for your support
That's a pretty cool old school USMA shirt.
it is just some top i was given. i actually dont know what it is
Flexible guitar pics work good on the screen filter to get them off the ledges. Works wonders instead of jamming playing cards in there.
The card trick is what I was missing, thanks for that! Although instead of a card a I cut a pieces of a plastic folder so it would be a little more structural. Great video
thanks for your support
Very, very helpful! Thank you for a great video!
thanks for your support
Thank you very much!No T6 screwdriver needed, just T10 and T8 for the whole process
Excellent video! Thank you. 😊
How to dissemble the bin to clean between the red gasket and the bin?
Excellent demonstration. Thanks
thanks for your support
Video was awesome! Many thanks!
thank I didn't remember how to put the seal and I find this video.helpful.....
thanks for your support
Excellent thanks saved my Dyson
thanks for your support
Thank you, very helpful. 👍
What about the inlet flap to the bin? Also there’s further deconstruction via the battery(just 3 screws and it comes out like a drill battery)
Wow thank You you are a good guide it helped me continue your good work...✌
thanksfor your support
Thank's for your course, very clear well explain nothing else to say as thanks. Serge
thanks for your support
Good detailed clean.
thanks for your support
@@OpenMeUpTec Thank you for the good work
Can you do a break-down of how the wiring sits in the motor-head
Great video!!
thanks for your support
F’ing awesome 👌🏽
Great video thanks!
How do I separate red ring from the container? Need to clean the area around grey flap that's inside of the grey bin spout. Two screws are out, but what do I do next? Seems stuck together...
What torque sizes do we need? Also can I soak the inner core...after I was able to use the cards & remove the filter @8 minutes into your video... I wanted to clean it thoroughly but unsure if there is anything electrical to worry about...much obliged for your video & support GREAT ONE!
you can clean everything beside the motor. the whole item at 5.00 in the video can be clean as it has not electric stuff
Excellent, thanks.
How do I disassemble down to the motor and PCB assembly?
That's the part I need to see, I have a loose cable on the pcb
Is it possible to get the red (upper) ring off the dust catcher please?
Ps your videos are superb!
you can but i forgot to show that part
Nice video! But what about the cleaning of engine fan? The blue part of your dyson. In older version is simply but here i dont have any idea :(
there is really nothing else you need to clean besides what i show you in the video.
@@OpenMeUpTec there is a foam filter. I find it and u can see it at this video
ruclips.net/video/NfIWN0TIgCM/видео.html
How do you remove air vent out purple part) ?
can you watch the video and tell me at what time you having issues with and what time the purple part shows up
Anyone know where the black paper-like gasket (smaller than the red one, same material) goes?
can you watch the video and tell me at what time it shows up so i know what you are asking.
@@OpenMeUpTec At 13:52, the part that's facing the camera -- in my Dyson V7, there's a black gasket that sits on top of that piece. Or at least I think that's where it goes. I didn't specifically see this gasket at any other point in your video. When I reassembled everything, the filter doesn't want to sit flush anymore.. seems like the gasket is causing it to be raise about 1MM up? I don't know where else it would go though.
@@-MrMoose it is best if you can disasseble it again and watch the video. as i am not certains what is the problem. can you take a picture of this peice or find it somewhere to show me what it is.
@@OpenMeUpTec I'm pretty sure the piece doesn't exist in your video... it's made of the same material as the red gasket. I'm going to leave it alone for now, vacc seems to work fine and it's my backup anyway 😅 Thanks for the response!
@@-MrMoose i see
Sorry, but the inflection in the way that you speak make it sound like your asking a question at the end of each sentence.
thanks for your help i will look into it
Thanks for the video but your voice was well annoying
thanks for your support i will look into upgrading my voice when i get more funding
@@OpenMeUpTec 😂
What the hell- people are so rude…