I like stock camera..but is easy to upgrade. I'm using caddex turbo. Excellent bird. Had me some arming issues but just figured out..this is going to be bird of 2019. Great little acro trainer or use to hone your power loops and such. It's so light wont break..I've wrecked hard! Its bear tuff! Great vid thumbs up..oh option 4 for cable..rotor riot sells a harness kit..can make own harness..get kit!
Hi..thank you for the help...can you tell me where to find the little direct plugin wire for the cam like you used...also will the nano 2 fit and will this little wire fit the nano 2 also?
Interesting! Thanks for this guide. I wanted to ask, do you have a problem with your props coming off without the screws holding them on? I just can't imagine how they would be necessary. Makes me want to get a new camera.
What the hell is that connector called dude. I can’t find it anywhere on the internet. You were so detailed I expected to hear you say what it was but you didn’t, all you said was use an old cable lying around. MX 1.0? I can’t figure it out HELP
I'm prety sure it's a jst -sh connector but you need to measure the pitch of the pins to be sure. I don't have it anymore to measure. Here is a wiki on the jst connector types. I hope it helps. en.m.wikipedia.org/wiki/JST_connector#Connector_series
I think you may have installed the tpu standoffs backwards. If you notice the post portion is slightly offset and you have the offset backward which caused it to pinch and v out the front of the mount. And the outside mounting holes have small cutouts to recess the screws. Maybe you didnt mirror the print? Just a observation. Its tpu so shouldn't matter much. I have a freestyle on the way and and doing the same mod. I had a local person print them off for me in abs
hey great video dude im sorry if this might be a stupid question but im new to fpv quad flying and was wondering if you can use a flysky fs-i6x transmitter with the tinyhawk freestyle or do you need to change anything on the quad to make it compatible ??
Good video. Easy to understand for a noob like me. Do you think a RunCam Split 3 Nano camera would work? I believe it weighs 10.5 grams...do you think that is too heavy? Thanks!
I Don't think there would be enough room above the stack and the top plate. As it is right now there is barely room between the VTX and the top plate for the battery strap.
Racer 2 nano should fit no problem. You'll need to source a control board from another camera. Register a new account on the Banggood APP and get $100 of coupons. I just found an amazing item with free shipping.banggood.app.link/Y0orMgiAk5 or ask around on the Fpv market place on Facebook. The other option is to use betaflight camera control.
Probably not. The reciever and Vtx are fairly well matched. If you upped the distance on the Vtx then you will quickly become limited by the spi rx. Eventually you will be chasing your tail on this one.
I was expecting that you would swap out the VTX as well. Thanks for the video as I bought a pair of these camera mounts to use with my FPV camera mod. They are much sturdier than they look.
Awesome video. I plan on doing exactly this mod as well as upgrading the vtx and receiver. My question is, how would I go about finding that switch board you showed? This is my first quad so I don’t have any spare parts but I’m loving it so far.
Possibly. The VTX on mine was actually pretty well matched to the Receiver range but i have her a lot of people complain about the poor video range. But with that said running a good VRX and good antennas can make a BIG difference.
Hi there nice video. Quick question, I change the stock cam on my freestyle with the run cam nano 2 and the fpv feed looks perfect but on the dvr recordings the colors are very red. Are there any settings for this camera? I also moded the vtx and xt30. I invite you to check out my channel. I did a video of the mods but with original camera I did not post the video with the run cam because of this issue. Any advice will help. Thank you in advance. Happy Flying!!!
i agree, might be easier to see difference in real life and not on an dvr recording. seems like theres more interference on the video with the runcam nano.
Really nice work, dude! Looks much better now! 😃
It really does, It would be awesome if this came with a better camera or at least the option for it.
I have It fully upgraded, the fc is the only think i didn't upgraded, what one should i choose?
I like stock camera..but is easy to upgrade. I'm using caddex turbo. Excellent bird. Had me some arming issues but just figured out..this is going to be bird of 2019. Great little acro trainer or use to hone your power loops and such. It's so light wont break..I've wrecked hard! Its bear tuff! Great vid thumbs up..oh option 4 for cable..rotor riot sells a harness kit..can make own harness..get kit!
Hi..thank you for the help...can you tell me where to find the little direct plugin wire for the cam like you used...also will the nano 2 fit and will this little wire fit the nano 2 also?
I have a question. I have the same drone and My port broke off, can i uses the 4 others for a camera?
Interesting! Thanks for this guide. I wanted to ask, do you have a problem with your props coming off without the screws holding them on? I just can't imagine how they would be necessary. Makes me want to get a new camera.
What the hell is that connector called dude. I can’t find it anywhere on the internet. You were so detailed I expected to hear you say what it was but you didn’t, all you said was use an old cable lying around. MX 1.0? I can’t figure it out HELP
I'm prety sure it's a jst -sh connector but you need to measure the pitch of the pins to be sure. I don't have it anymore to measure. Here is a wiki on the jst connector types. I hope it helps. en.m.wikipedia.org/wiki/JST_connector#Connector_series
I think you may have installed the tpu standoffs backwards. If you notice the post portion is slightly offset and you have the offset backward which caused it to pinch and v out the front of the mount. And the outside mounting holes have small cutouts to recess the screws. Maybe you didnt mirror the print? Just a observation. Its tpu so shouldn't matter much. I have a freestyle on the way and and doing the same mod. I had a local person print them off for me in abs
hey great video dude im sorry if this might be a stupid question but im new to fpv quad flying and was wondering if you can use a flysky fs-i6x transmitter with the tinyhawk freestyle or do you need to change anything on the quad to make it compatible ??
No, it will only work with frsky transmitters. You can install a flysky reciever in it.
@@TweetFPV thank you
Hi! Is there a good camera that actually ships with its own mounts so I don't need to find 3D prints?
Racer micro I think ships with a adapter mount. Not sure what exactly you are looking for.
Racer micro I think ships with a adapter mount. Not sure what exactly you are looking for.
Good video. Easy to understand for a noob like me. Do you think a RunCam Split 3 Nano camera would work? I believe it weighs 10.5 grams...do you think that is too heavy? Thanks!
I Don't think there would be enough room above the stack and the top plate. As it is right now there is barely room between the VTX and the top plate for the battery strap.
Hey there, I just got a Freestyle. Can I use the racer nano 2 instead of racer nano. Where can I get the joystick? Great video
Racer 2 nano should fit no problem. You'll need to source a control board from another camera. Register a new account on the Banggood APP and get $100 of coupons. I just found an amazing item with free shipping.banggood.app.link/Y0orMgiAk5 or ask around on the Fpv market place on Facebook. The other option is to use betaflight camera control.
i am expecting mine friday i hope its better thayh the tiny hawk and baby hawks need help getting my tiny hawk going
It'd good I wouldn't say it's better than the babyhawk just different. It certainly flies way better than the babyhawk did out of the box.
awesome video, got any plans on upgrading the VTX so you can go beyond 25mw ?
Probably not. The reciever and Vtx are fairly well matched. If you upped the distance on the Vtx then you will quickly become limited by the spi rx. Eventually you will be chasing your tail on this one.
And just like that the market responds tinysleds.com/products/emax-tinyhawk-freestyle-vtx-rx-sled
because osd doesn't appear and before yes (runcam nano 2)
I was expecting that you would swap out the VTX as well. Thanks for the video as I bought a pair of these camera mounts to use with my FPV camera mod. They are much sturdier than they look.
The Vtx on mine is fairly well matched with the reciever range so I left it alone.
That make sense.
I can see why you're satisfied with the stock VTX. It has alot less interference than mine does.
I am running rapidfire, so that does help a bit. Also I'm out in no where and there really isn't much 5.8g noise where I'm at.
Awesome video. I plan on doing exactly this mod as well as upgrading the vtx and receiver. My question is, how would I go about finding that switch board you showed? This is my first quad so I don’t have any spare parts but I’m loving it so far.
www.banggood.com/custlink/Kmmvevf96I
TweetFPV Awesome, thanks a bunch!
Great video thanks for posting does anyone know how hard it is to use a fly ski controller with this
You would need to solder your own reciever to the tinyhawk board. Other than that it should be pretty easy.
Is this really worth doing without upgrading the VTX. The vtx on this model is shite.
Possibly. The VTX on mine was actually pretty well matched to the Receiver range but i have her a lot of people complain about the poor video range. But with that said running a good VRX and good antennas can make a BIG difference.
@@TweetFPV I just upgraded it with a $12 300 mw VTX, and am much happier with my crashes now.
Haha nice!
@@TweetFPV I just wonder how much more of a hit the batteries are going to take cranking out those additional 275 milliwatts
Probably not enough to notice.
Anyone know if a ratel would fit??
Ratel is too big but if you had a 3d printer you could probably design somehting to make it fit.
I have a extra sled this board will allow you to easily mount a RX and TBS Unify Nano VTX be happy to mail it to you if you want
Hi there nice video. Quick question, I change the stock cam on my freestyle with the run cam nano 2 and the fpv feed looks perfect but on the dvr recordings the colors are very red. Are there any settings for this camera? I also moded the vtx and xt30. I invite you to check out my channel. I did a video of the mods but with original camera I did not post the video with the run cam because of this issue. Any advice will help. Thank you in advance. Happy Flying!!!
unfortunately there are no adjustments to this camera that i know of.
@@TweetFPV Thanks anyway, maybe is my dvr. Happy Flying!!!!
difficult to see the difference
i agree, might be easier to see difference in real life and not on an dvr recording.
seems like theres more interference on the video with the runcam nano.