Thank you for the video francisco. They are excellent. I like how you are original. Keep doing everything the same my friend you are something fresh on youtube👍🏼
@@ric-kx6br I walked away from my local job. Got into argument with the boss man about my safety. I went back OTR leasing. I like it better that way because if I have an issue with the truck then I can fix it without anyone's permission. A&A Express. Only 6mo experience required. I've already made a 3k paycheck on my 2nd week of work.
@@ric-kx6brbro if a company neglects the issue that is really obvious and could risk your life, turn in the keys and look for a company that cares about you
When rolling through the scale, pick up paper log and hold it up, showing it to them. They'll understand, that's how you request a lvl 1. You can request inspection silently, no worries if company checks camera your request won't be heard
My truck exact same is leaking right from bottle small bolt, due to hit something with tire. Can I just remove that bottle bolt and might be any oring seal that can be replaced to stop leak??
Francisco thank you for the video. I have a similar steering system. I lifted the front end suspension of my Cascadia because I converted my truck into a to a Dump Truck. Now my steering wheel wheel is not level. It ia now steaight when it is at 10 & 4 o’clock. How should thia be corrected?
Francisco I have a 2017 cascadia. I have some free play on my steering wheel. How do i know if my gear box needs to be replaced? I already replaced the drag link which was bad.
My drag link had slop in it, but I bought a power steering because I could hear the pump noise when turning the wheel. Not fully a waste. I'll keep the pump for later, but if like to have kept the pump cost instead
Excelent I just had that probkem Lot play on wheel i was bout going replced tie rods and drag link But after inspect exact wha this video said i just retie that big bolt and nut described here and problem solved No more play at all at steering wheel I saved hundreds. Just by tied this nuts by the steer fear box
If the alignment is done properly and still pulling to one side then your steering box most likely needs to be replaced. But before doing it check all the bushings, condition of each parts of steering assembly. It might be just one bushings or rod needed to be replaced
I have a sterring problem with my freightliner xlassic where ate you located....no one has been able to fix the issue not sure but it feels so tight over steers extremely dangerous
Francisco how do I check my Drag Link?? because I been driving my truck for two years with the Drag link put on backwards and just found out from a mechanic? My mechanic put it back on the right way but it feels like it has play when I hold on too it and push forward is that normal?
If you hear &feel a clunk clunk when rocking the steering wheel back & forth with the motor off then you most likely have a bad u-joint in one of the steering column shafts . Some you can replace others are welded in &you half to replace the whole shaft.
Hey man thank you for the videos. can you help me man having a problem with 2012 Freightliner Cascadia the steering wheel, shakes and vibrate in high speed. When speed between 40-55 only and it stops and everything's normal, you know what causes them. Thank you.
Jaja yo pense lo mismo pero el somali tiene razon , pero pues ya que vives en usa unas clasesitas de pronunce no te arian daño , los tips al 100% muy buenos para los que vamos comenzando
Simple but easily overlooked. Great video
Love all the knowledge in your videos, thanks brother.👍
We really appreciate your videos bro!
Thank you for the video francisco. They are excellent. I like how you are original. Keep doing everything the same my friend you are something fresh on youtube👍🏼
I need to show up at a weight station and ask them to do an inspection. I need to be shutdown so that my company replaces the steering gear box
bro !!! Company I'm at gave me so much shit cause I kept mentioning it ! They just don't want to spend money
@@ric-kx6br I walked away from my local job. Got into argument with the boss man about my safety. I went back OTR leasing. I like it better that way because if I have an issue with the truck then I can fix it without anyone's permission. A&A Express. Only 6mo experience required. I've already made a 3k paycheck on my 2nd week of work.
@@ric-kx6brbro if a company neglects the issue that is really obvious and could risk your life, turn in the keys and look for a company that cares about you
When rolling through the scale, pick up paper log and hold it up, showing it to them. They'll understand, that's how you request a lvl 1. You can request inspection silently, no worries if company checks camera your request won't be heard
Good Video!! Amaya
My truck exact same is leaking right from bottle small bolt, due to hit something with tire.
Can I just remove that bottle bolt and might be any oring seal that can be replaced to stop leak??
Francisco thank you for the video. I have a similar steering system. I lifted the front end suspension of my Cascadia because I converted my truck into a to a Dump Truck. Now my steering wheel wheel is not level. It ia now steaight when it is at 10 & 4 o’clock. How should thia be corrected?
Duro mi broder 🦾🦾🦾
What if the play is between the steering wheel and firewall? Can I tighten or do I need to replace parts usually?
Francisco I have a 2017 cascadia. I have some free play on my steering wheel. How do
i know if my gear box needs to be replaced? I already replaced the drag link which was bad.
Thanks for sharing!
My truck goes to the right. Mechanics say the alignment is good. You think it could be the steering box ?
Great video sir
Thanks
I love the video
Thanks man, a blessing like always 👍👍
My drag link had slop in it, but I bought a power steering because I could hear the pump noise when turning the wheel. Not fully a waste. I'll keep the pump for later, but if like to have kept the pump cost instead
Thanks Francisco u the best 👌
Excelent
I just had that probkem
Lot play on wheel i was bout going replced tie rods and drag link
But after inspect exact wha this video said i just retie that big bolt and nut described here and problem solved
No more play at all at steering wheel
I saved hundreds. Just by tied this nuts by the steer fear box
Muchas Gracias Hermano.
Francisco I have a question regarding the rack & pinions that came on the 2006 Columbias
I have 2015 freightliner cascadia dd13 and this is what my truck is doing I’m constantly moving the steering wheel left to right to keep it strait.
Buen day Hermano. Tengo un 2017 international prost. Donde esta ese tornillo Para ajustar el mio. Muchas gracias 🙏
Si tines algun video o puedes hacer uno explicando como ajustar la caja
Thank you for sharing this information. What’s the ft-lbs need to tighten the screw please?
Great stuff.
great video
Francisco where ur shop located
Where is your location?
I got t800 drag link touch tire when turning left right any solutions
sao anh ko quay clip dài để em coi anh làm lun hả anh amaya
Hey, on an International 4300, is the steering wheel straightened from form the steering wheel or from underneath the truck?
Bon information
What would cause a hard pull to the right, but even wear on my steer tires?
Same here,even after alignment
If the alignment is done properly and still pulling to one side then your steering box most likely needs to be replaced. But before doing it check all the bushings, condition of each parts of steering assembly. It might be just one bushings or rod needed to be replaced
did you ever found the problem ? I have the same issue.
@@renemarrufo7536 no sir I haven't
I have a sterring problem with my freightliner xlassic where ate you located....no one has been able to fix the issue not sure but it feels so tight over steers extremely dangerous
Do you do pre-purchase inspections?
He does that sometimes.
What do you think if you hear noise when you turn to the right side only?
My appreciation..
thank you so much
Francisco how do I check my Drag Link?? because I been driving my truck for two years with the Drag link put on backwards and just found out from a mechanic? My mechanic put it back on the right way but it feels like it has play when I hold on too it and push forward is that normal?
So what kind of engine does your truck have
I replace the drag link, the pitman arm and the gearbox and I still have some play . What can I do next ?
Check you draglink and tie rod ends
If you hear &feel a clunk clunk when rocking the steering wheel back & forth with the motor off then you most likely have a bad u-joint in one of the steering column shafts . Some you can replace others are welded in &you half to replace the whole shaft.
Thanks
Thanks bro
Saludos Mr Frank espero no verlo pronto jaha es decir q no me falle el animal
Thanks Sir
Is their way to adjust gear box?
It is just the bolt, it was not tight enough.
Yes, in the back of the steering box there’s a nut and flat head screw. You can access it through a small round hole in the frame rail.
Que es eso que tiene el steering wheel Francisco??
Cual es el problema?
El pitman arm estaba flojo
Yes I got same problem. I think my bolt is bad keep losing
I try telling my company my freight liner leans, vibrates and I battle the steering wheel everyday. They think I’m paranoid
Time to find a new company that takes safety seriously
Yeah, but now either the Pittman arm or the gearbox are screw off
hubiera Sido un excelente video si lo hubieras enseñado paso a paso
Hey man thank you for the videos. can you help me man having a problem with 2012 Freightliner Cascadia the steering wheel, shakes and vibrate in high speed. When speed between 40-55 only and it stops and everything's normal, you know what causes them. Thank you.
Maybe you have a bad rims or tires or bad drums
Replace the bolt .it be worn
👍
Hello Fransisco, I have a question mi truck's steering column doesn't tilt, can I replace it with a steering column that does? Thank you
I am pretty sure you can. They usually have the same mounting points
I can send u a picture
bhru están chidos tus videos pero hazlos en español, my head hurts trying to understand your English
His English is fine. Maybe it's yours that needs improvement
Okay my African brother
Don't speak on English :0/ please you speak better on Spanish than in English
Spanish is his language but he's viewers are from around world and I'm sure most of them understand english
No way bro I want to understand as well 😉
Es algo muy común en los camiones, ese juego en el timon, arreglar seria cambiar la caja de timon?
Jaja yo pense lo mismo pero el somali tiene razon , pero pues ya que vives en usa unas clasesitas de pronunce no te arian daño , los tips al 100% muy buenos para los que vamos comenzando
Thanks
Thanks