Great job! Thank you for posting this video as I followed it to swap my handles out on my 14 WK2. With your help, starting with step 1 how to make coffee all the way to the end, it took me just around. 3 hours to do all four doors! Great video!
great job man , I hate the chrome on my 2017 Jeep GC overlaid I am going to send out my Jeep badging to carbon fiber dipping the grill rear signal light bezels . bright white door handles are a big must thank you.
Hey could you provide info or video on how you switched out the rear step surround? I've got.the mopar blk textured rear step surround, and it has tabs all around the piece, snap on functionality, without any screws. How did you pop off this piece? Thank you.
Gene P. Just use plastic pry tools and pull up on the pad it pops out super easy. Look at the replacement black pad you’re going to swap in and locate all the key clip areas this is a huge help.
Great video! 👍🏼 Do you have a part number for the white door handles? I’ve tried getting them but they all seem to be a primed finish ready for painting.
thats awesome. i am sure u get this question often and im sure i know the answer but, why don you just pick up the coers that 3M to the existing handles. I am assuming because you want the actual handles. Which i get but for me i am just going to get the covers. With that said you did help me learn other things about the door as well so either way this was veryt helpfull. Specially when i decide to change the ambiant lighting color from cyan to RGB and when i sound deaden the doors
I have a '19 GC and the rear passenger door does not open. A mechanic thinks he can get it open by removing the door handle. How can he do that with the door closed?
So here is my question. I have murdered out several of my Jeeps in the past but my 15 Limited has the chrome covers on the door handles and the side view mirrors. I want to paint them to match the body color, True Blue Pearle using paint from the Touchup Zone. Any tips on removing the covers and any experience with Touchup Zone paint? Thanks.
Does anyone know what would cause the passive entry on the front passenger door not to work after doing this? It works fine on the drivers side but not on the passenger. Unlocking and locking neither one works from the outside.
@@AtlasWilder not really lol was hoping the wraps would work w the black , did chrome window trim delete yesterday, def needs the handles to match it now
Christine Sidden undo the bottom part of plastic under front bumper it’s some plastic pop clips then get access behind fender liner to pop out the bezel from behind
Any reason why you chose to replace the whole handle (which I am sure was not cheap) as opposed to buying the $20 black gloss handle covers and painting them OEM white to match your jeep? I am leaning towards this as a cheaper option then replacing the handles themselves. Thoughts?
FunkyMedicine I picked up the handles on eBay for about $200. I don’t usually cut corners on aesthetic mods, if I can replace with oem stuff. The covers will have gaps on backside where you slide your hand. That would bother the heck out of me. However you do you! I totally get it money could be spent else where.
@@AtlasWilder How did you vinyl wrap the chrome tail light bezels? Did you wrap it with the tail lights as is, or did you remove the tail lights first?
Front doors were a pain, even with taking the door latch off on the side of the door. My arms were just to big to get them moved around. I eventually pulled the door skin back far enough but had to watch breaking off the plastic inside holding the lock on. Btw the video is amazing, damn arms were just to big esp after dropping a bolt. Hey wife lol
The job is a slight nightmare for sure and all those damn 10mm around the inner door panel! Shoot me lol glad that video helped and the oem look is so much better than vinyl or plasti dip
Great informational video! Would you be willing to show me how to replace the chrome outer window lining with the black? To order this black strip, you need to identify a Jeep GC at a dealership, then ask what part # it is. This would make the GC look even cleaner imo. Any suggestions? Also, do you have a video on swapping out the side mirrors? Thanks again.
Thanks! I’m not sure we will ever get around to replacing the trim. There is some videos out there however and check out jeepgarage forum for more info on that. I don’t have a video for the mirrors, I did most the mods on the Jeep before I got into vlogging them. A lot of people also go the vinyl route on the trim. Cheers!
I drive a 2017 overland. I ordered my window chrome delete vinyl 3m sticker from crux motor. It looks perfect and if I can do it anybody can. They have a video on you tube but its pretty self explanatory.
Thank you for a excellent video! I followed your video with one change I made. If you unscrew the 3 screws that attach the power window motor this frees the window to move it up and down by hand so you can more finely move the window to get at that clip that keeps the window in place. I was having some difficulty getting the clip where I needed it to get my hand or a tool near it, but I was working on the passenger door also. Thank you for doing this for us Jeep owners!
10:39 Try lining the socket with a scrap of notebook paper, and nut will not fall out when you remove it. Tape one side of scrap onto the side of socket to hold in place. 14:29 Mask off paint around door handle to protect from scratches while fidgeting to remove door handle.
Hey, thanks so much for making this video, I’ll be using it for sure to replace my handles as well! Would you happen to remember where you picked up that red tool for removing the interior door panel and window control panel?
Ricardo Barraza thanks! I swear I got something similar to this rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F263182122614 They have them on amazon also. Cheers!
Was thinking of buying body colored door handles but after seeing this video on how to replace them it just doesn't seem worth it. I'm mostly concerned that everything doesn't get put back as securely and I'll end up with rattles etc.
Thanks for this. Please don't take this video down for at least a couple of months. That should give me enough time to tackle the project LoL. Also, are those the stick on mirror covers or did you paint them? If stick on, how do you like them?
Apostolis Balanikas thanks! Don’t worry the video isn’t going anywhere. They are stick on, almost perfect fit but up close you can see it is thicker and not oem. Other than that I’m happy with them not trying to break the bank on the Jeep build 👍
Mods And Coffee Thanks again. Last question. I noticed the driver door handle came with the bracket attached? Any reason for this? Any issues swapping out the key cylinder?
Apostolis Balanikas key cylinder slides in and out easy. The handles I ordered came like that way, I mounted them to the oem pieces nothing to worry about.
Ha ha...you went from jeep to Subaru...I was looking at Subarus and almost bought one, but the fact that they do not have the ability to lock up the drive train off road led me to buy a Jeep Cherokee trail hawk. After a small lift and bigger tires I have an off road beast that none of the newer Subarus can touch off road no matter how you mod them!
Great job! Thank you for posting this video as I followed it to swap my handles out on my 14 WK2. With your help, starting with step 1 how to make coffee all the way to the end, it took me just around. 3 hours to do all four doors! Great video!
Excellent job….. I’m changing out a broken handle on my neighbors Cherokee for her… much appreciated
Best video for DIY, very detailed. I even followed the first step to make ☕️ coffee.
Thank you!! That first step is crucial especially for this Diy... what a doozy lol
He did such a great job he made look so easy.
Can you let me know where you got the black trim piece that goes around the step plate on the rear bumper? Thanks!
eBay lol not lying
How close were you from completely removing the inner trim? Im buying a new door and everything needs to transfer to it
I've been wanting to wrap my jeep but couldn't figure out the door handles. Thank you sooooooo much!!
Joshua Baca no worries my pleasure! Been wanting to do this mod forever.
great job man , I hate the chrome on my 2017 Jeep GC overlaid I am going to send out my Jeep badging to carbon fiber dipping the grill rear signal light bezels . bright white door handles are a big must thank you.
OptimusBob119 you’re welcome, hope it helps just take your time and everything will go smooth.
You deserve a lot more views for this.
Hey could you provide info or video on how you switched out the rear step surround? I've got.the mopar blk textured rear step surround, and it has tabs all around the piece, snap on functionality, without any screws. How did you pop off this piece? Thank you.
Gene P. Just use plastic pry tools and pull up on the pad it pops out super easy. Look at the replacement black pad you’re going to swap in and locate all the key clip areas this is a huge help.
@@AtlasWilder Thanks man for your prompt reply and advice.
It was an easy pop up.
Great video! 👍🏼
Do you have a part number for the white door handles? I’ve tried getting them but they all seem to be a primed finish ready for painting.
thats awesome. i am sure u get this question often and im sure i know the answer but, why don you just pick up the coers that 3M to the existing handles. I am assuming because you want the actual handles. Which i get but for me i am just going to get the covers. With that said you did help me learn other things about the door as well so either way this was veryt helpfull. Specially when i decide to change the ambiant lighting color from cyan to RGB and when i sound deaden the doors
Is it harder getting the window back in?
Great video, very helpful , love the detail and explanations.
I have a '19 GC and the rear passenger door does not open. A mechanic thinks he can get it open by removing the door handle. How can he do that with the door closed?
Why did you take the glass out on the front passenger side and not the back doors?
Clearance issue I believe
Thanks a million for this video. I had a lot of work to do on my door and this video helped the whole way. Great video!!!
Ramon Potter glad it helped! That job is not fun and man it was freezing that day 😂
So here is my question. I have murdered out several of my Jeeps in the past but my 15 Limited has the chrome covers on the door handles and the side view mirrors. I want to paint them to match the body color, True Blue Pearle using paint from the Touchup Zone. Any tips on removing the covers and any experience with Touchup Zone paint? Thanks.
I’ve used touch up paint before however what is your intention? To use a spray can right?? Chrome covers & not actual handles?
I must of missed when you viynl wrapped the handles. Is that time consuming or finicky?
Lol no I used painted handles
Does anyone know what would cause the passive entry on the front passenger door not to work after doing this? It works fine on the drivers side but not on the passenger. Unlocking and locking neither one works from the outside.
You forgot to plug in one of the connectors or didn’t get it plugged in all the way. I actually made this mistake
Should i do this for my chrome handles on my black 2015 or just do the cover/ wraps ? ... thanks for the help
Just cover the silver parts way easier and cheaper. Replacing the entire handle takes some work.
@@AtlasWilder sweet man thanks for the reply
If you want to do this nightmare of a job find the handles used on eBay. It will save you $$
@@AtlasWilder not really lol was hoping the wraps would work w the black , did chrome window trim delete yesterday, def needs the handles to match it now
Is there anyway of doing this replacement without taking out the glass in the front doors?
I don’t think so
@@AtlasWilder yeah I've been hitting up the forums and your correct the for the fronts the window has to be removed.
Where did you get the black head light bezels and the black grill im looking for the pieces on my jeep wk2 2019
Same place I got mine, I got my lower front fascia from eBay for 180$ gloss black
Soo do you actually have to remove the window on the front is it away around it
Yes you have to
@@AtlasWilder I did the back doors I was stalling around on the front hoping it was a easier way lol
Unfortunately yeah it’s a bummer, I just picked up a used High altitude that way I wouldn’t ever have to change the handles again lol
You have great skills, this isn’t for the impatient or someone with minimal mechanical skills
Nice I want to replace the chrome on my limited with all black accents. Where did you get your accents
I ordered all the pieces from quick parts on eBay. Easy stuff to swap out!
How did you replace the fog light bezel? We have the part coming today to change ours out today
Christine Sidden undo the bottom part of plastic under front bumper it’s some plastic pop clips then get access behind fender liner to pop out the bezel from behind
Mods And Coffee thank you
Where did you order the matching door handles from? I have a 2021 Overland.
Honestly ebay used LOL however I think justforjeeps has them as well new
Could you share the link on eBay where you got the white mirror caps? I’m having trouble finding white ones. Thanks!!!
Honestly if you’re looking for Painted ones just get used ones on eBay oem fit and quality 👌
Haven’t been able to find any :(
Did you buy a whole mirror or is there a cap to put over the chrome or replace it?
I used 3m caps, I hold recommend buying used covers for an oem look
Im gonna try it to replace my 2020 limited driver handle
Probably easier and less frustrating to just wrap the handles. Great breakdown, but I don’t have the patience.
Dude I hated this job and in winter yuck!! Wrap handles or covers lol hell maybe even plasti dip
Any reason why you chose to replace the whole handle (which I am sure was not cheap) as opposed to buying the $20 black gloss handle covers and painting them OEM white to match your jeep? I am leaning towards this as a cheaper option then replacing the handles themselves. Thoughts?
FunkyMedicine I picked up the handles on eBay for about $200. I don’t usually cut corners on aesthetic mods, if I can replace with oem stuff. The covers will have gaps on backside where you slide your hand. That would bother the heck out of me.
However you do you! I totally get it money could be spent else where.
@@AtlasWilder How did you vinyl wrap the chrome tail light bezels? Did you wrap it with the tail lights as is, or did you remove the tail lights first?
Didn’t use wrap, those are the oem painted bezels.
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F352437172331
Did u buy all thru dealer ?
Check just for jeeps website and I bought through eBay
Did the new handles come with a new physical key, or do you need to switch out the lock from old to new handles?
No, you will be able to swap out the lock cylinder it’s easy. 👌
@@AtlasWilder awesome! I'm doing big things to my 2018, getting rid of the chrome is priority 1
I might have missed it, but where did you get the pre-painted handles?
Got mine on eBay, I believe just for jeeps sells them as a kit also.
Thank you!
Thanks a bunch! Great video!
Front doors were a pain, even with taking the door latch off on the side of the door. My arms were just to big to get them moved around. I eventually pulled the door skin back far enough but had to watch breaking off the plastic inside holding the lock on.
Btw the video is amazing, damn arms were just to big esp after dropping a bolt. Hey wife lol
The job is a slight nightmare for sure and all those damn 10mm around the inner door panel! Shoot me lol glad that video helped and the oem look is so much better than vinyl or plasti dip
Where did you get the mirrors from?
eBay.
Mods And Coffee nice, thanks!
Did they come painted black? Trying to swap my chrome ones out for the black
Yes they do
Hi, where did you find the mirror caps ?
Adrian Toia on eBay!
This is a fantastic video. I did the same thing- I have a 2016 Overland. Came out perfect with the help of this video! TK
Tim Kiley thanks! Not my best work and definitely not a fun job, except someone had to catalogue it! Glad yours turned out the same 👌
Great informational video! Would you be willing to show me how to replace the chrome outer window lining with the black? To order this black strip, you need to identify a Jeep GC at a dealership, then ask what part # it is. This would make the GC look even cleaner imo. Any suggestions? Also, do you have a video on swapping out the side mirrors? Thanks again.
Thanks! I’m not sure we will ever get around to replacing the trim. There is some videos out there however and check out jeepgarage forum for more info on that. I don’t have a video for the mirrors, I did most the mods on the Jeep before I got into vlogging them. A lot of people also go the vinyl route on the trim. Cheers!
I drive a 2017 overland. I ordered my window chrome delete vinyl 3m sticker from crux motor. It looks perfect and if I can do it anybody can. They have a video on you tube but its pretty self explanatory.
Do the mirror caps just pop off?
site.justforjeeps.com/guide/82212218.pdf
Where did you buy the handles from
Check justforJeeps.com I found these on eBay
Thank you for a excellent video! I followed your video with one change I made. If you unscrew the 3 screws that attach the power window motor this frees the window to move it up and down by hand so you can more finely move the window to get at that clip that keeps the window in place. I was having some difficulty getting the clip where I needed it to get my hand or a tool near it, but I was working on the passenger door also. Thank you for doing this for us Jeep owners!
10:39 Try lining the socket with a scrap of notebook paper, and nut will not fall out when you remove it. Tape one side of scrap onto the side of socket to hold in place. 14:29 Mask off paint around door handle to protect from scratches while fidgeting to remove door handle.
I used a telescoping magnet to remove the bolts. Simple
1/4 in ratchet works better. The 5/16 is actually 8mm
Good to know!
Hey, thanks so much for making this video, I’ll be using it for sure to replace my handles as well! Would you happen to remember where you picked up that red tool for removing the interior door panel and window control panel?
Ricardo Barraza thanks! I swear I got something similar to this
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F263182122614
They have them on amazon also.
Cheers!
Just ordered it, thanks so much! Can't wait to give this a try.
Thank you
You’re welcome!
Great video, your a life saver.
Great video it help a lot
Thanks for watching! Glad I could help
You didnt have to take the window out on the back door ?
TATTOO TECH exactly! Back doors are easier 👌
Was thinking of buying body colored door handles but after seeing this video on how to replace them it just doesn't seem worth it. I'm mostly concerned that everything doesn't get put back as securely and I'll end up with rattles etc.
Yup it’s a PITA would do again if I had chrome handles on a older model.
Great video, my compliments to you. Chrysler Jeep engineers did a shitty job on these door handles.
Thanks for this. Please don't take this video down for at least a couple of months. That should give me enough time to tackle the project LoL. Also, are those the stick on mirror covers or did you paint them? If stick on, how do you like them?
Apostolis Balanikas thanks! Don’t worry the video isn’t going anywhere. They are stick on, almost perfect fit but up close you can see it is thicker and not oem.
Other than that I’m happy with them not trying to break the bank on the Jeep build 👍
Mods And Coffee Thanks again. Last question. I noticed the driver door handle came with the bracket attached? Any reason for this? Any issues swapping out the key cylinder?
Apostolis Balanikas key cylinder slides in and out easy. The handles I ordered came like that way, I mounted them to the oem pieces nothing to worry about.
@@AtlasWilder Any chance you have a link to where you got the covers?
Tom Cutsforth honestly no it was so long ago! Got them on eBay
A lot of work to remove such a small and simple part
I prefer the chrome have a black 2015 overland.
Great Job
Hell yeah major help was stuck for a good little minute now it’s a breeze lol
Heck yeah! You’re welcome 💯
thanks bud
thanks for the video this is a headache
No problem man, it’s time consuming for sure and not a whole lot of fun it you don’t have the right tools either
“It’s gonna be pretty straight forward”. Proceeds to take off 4 door panels lol
You ain’t lying you testifying 🤣🤣
Wow! Look at you go you little Chip Foose.
Ha ha...you went from jeep to Subaru...I was looking at Subarus and almost bought one, but the fact that they do not have the ability to lock up the drive train off road led me to buy a Jeep Cherokee trail hawk. After a small lift and bigger tires I have an off road beast that none of the newer Subarus can touch off road no matter how you mod them!
I actually just bought a Grand Cherokee wk2! Check out my new videos!
Great Job, I just started to black out my overland. I’ll follow you on IG
Pro tip: watch movies on flixzone. I've been using it for watching a lot of movies recently.
@Owen Ari Yea, I've been using flixzone for since november myself :D
@Owen Ari Yup, I have been using Flixzone for since november myself :D
@Owen Ari yea, have been watching on flixzone for since december myself =)
@Owen Ari Yea, have been using Flixzone for since november myself :)
Well Done
How does this DIY get 24 thumbs down has got me stuffed! how detailed videos do you pricks want?😂🤣
Haters bro lol 😂
2:40…
Aww man f^*# all that noise, I’m wrapping the handles while they’re on the Jeep..
No way it takes this long
thanks a lot time so remove excelent
who else thinks this rigid inner panel system is stupid?
such bullshit I gotta take the window out for a door handle
Yup it’s absolutely ridiculous
Dude are u kidding keep the window up while u do it
That’s not how it works. The window motor gets removed watch the whole video
The manufacturer needs to redesign the door handle. I don't like it.
This platform was based off an older Mercedes they sold it to Jeep lol
You went through all that trouble when you could of got them wrapped for $100 🤦🏽♂️
Nope, it’s gotta be perfect my guy. If I was changing the handles to black wrap would be the best choice.
What a bad design. Honda is the best. Who would approve this design?
Seriously what a PITA
Fucking jeeps 😂
Get to the point
That shit suck 😒
It’s a horrible job lol
Where did you purchase the Black fog light bezel.
Honestly eBay, it’s oem. I don’t remember the vendor tho
Thank you