Glad it helped. We've all learned from RUclips videos, we've all seen good ones and bad ones, I've tried to take what I've learned and apply it to all my videos. More videos coming
Thanks for the video. Just a heads up for anyone about to remove their door panel, the philips head screw can actually stay screwed in. It holds the plastic door handle housing into place and the panel can come off with that still in place. Only need to remove the 7mm and 10mm bolts.
That's got to be super annoying lol. Yeah just take your time, especially when you're trying to find those clips,. Before you reattach the panel, make sure all the clips are still attached to the panel before you start reattaching it
I had the same thing and all I had to do was remove the bottom tabs and the quarter fell right out. The clips didn't go right back in but I will try again in the morning. I agree, great video.
What if I only want to replace (or attempt to repair) the driver side armrest in the front door trim? The leather has come up and is slowly becoming more disbonded from the armrest adjacent to the switch for the window(s) control. Does the whole door panel have to come off?
HELP!! I had the front tints done on my WK2 and now the door lock knob wont sit flush all the way down like it used to... do i have to replace it or what could of caused it??
Hard to tell, if you go to 03:28 in my video, you can see that the door lock assembly is simply a rod that goes to the door lock module. It's possible that whoever did your tint job, may have either been the rod, or not fully seated door panel correctly. Does it still go up and down when you lock and unlock the doors? If it were me, I would simply remove the door panel and check
@@ExoticCarDIY hey thanks for replying! Yes it works perfectly fine. When I hit the lock button it goes down but sticks out just slightly higher than the passenger side.
Yes, the trim is removable and replaceable. However I believe it is attached with plastic rivets and not screws. Meaning, you may have to glue it back into place
This video made it super easy to replace my Jeep Grand Cherokee interior handle. Thank you!!
Glad it helped!
Thank you. I need to remove my door panel on my 15 WK to get to a bit of rust I appreciate the simple instructions
Thank you to the guy who made this video. Super easy to follow, I partially watched numerous videos that were not helpful at all. TY
Glad it helped. We've all learned from RUclips videos, we've all seen good ones and bad ones, I've tried to take what I've learned and apply it to all my videos. More videos coming
Thanks for the video. Just a heads up for anyone about to remove their door panel, the philips head screw can actually stay screwed in. It holds the plastic door handle housing into place and the panel can come off with that still in place. Only need to remove the 7mm and 10mm bolts.
Thanks for the tip
Clear and concise. Thank you.
This was awesome. I have something like a coin or screw rolling around in my door and it’s soooo annoying! I feel like I can retrieve it myself now.
That's got to be super annoying lol. Yeah just take your time, especially when you're trying to find those clips,. Before you reattach the panel, make sure all the clips are still attached to the panel before you start reattaching it
I had the same thing and all I had to do was remove the bottom tabs and the quarter fell right out. The clips didn't go right back in but I will try again in the morning. I agree, great video.
Thanks for the video, hopefully it will help me solve vibration issues with the inserts behind the interior handles.
Tnx brother. Good luck with next project
Appreciate it!
Bro thank you!!! Now I’m confident enough to do it!
The hardest part is getting it back on! Trying to get clips to make along the top takes two people! On to hold and one to battle the clips!
Thank man. Appreciate your hard work, subbed and liked
Much appreciated!
thank you very much, this is going to help me install my steroe
Glad it helped!
Saludos desde chile ,gracias 🎉
Gracias saludos de Perú
What if I only want to replace (or attempt to repair) the driver side armrest in the front door trim? The leather has come up and is slowly becoming more disbonded from the armrest adjacent to the switch for the window(s) control. Does the whole door panel have to come off?
Thank You
Thank you
Glad it helped! Thanks for watching
Thank you!
You're welcome!
HELP!! I had the front tints done on my WK2 and now the door lock knob wont sit flush all the way down like it used to... do i have to replace it or what could of caused it??
Hard to tell, if you go to 03:28 in my video, you can see that the door lock assembly is simply a rod that goes to the door lock module.
It's possible that whoever did your tint job, may have either been the rod, or not fully seated door panel correctly.
Does it still go up and down when you lock and unlock the doors?
If it were me, I would simply remove the door panel and check
@@ExoticCarDIY hey thanks for replying! Yes it works perfectly fine. When I hit the lock button it goes down but sticks out just slightly higher than the passenger side.
What size sockets did you use?
I'm pretty sure it was a 7 or 8 and a 10
What's the name of this color interior?
"New saddle "
hi..exotic ^^ could i remove the wood style trim on the door please? thank you for the video
Yes, the trim is removable and replaceable. However I believe it is attached with plastic rivets and not screws. Meaning, you may have to glue it back into place
@@ExoticCarDIY oh.....i really appreciate you