Excellent video. Thanks for posting. Facing a similar issue with A1893 (ipad 6). Drawing current but not charging. Tristar & dockflex testing fine with tester. Very likely will be a bad cap and will confirm with thermal camera.
My iPad Pro 10.7 began restarting when I moved it in certain ways and eventually it stopped turning on altogether so I took it to the Apple Store and they looked at it and saw that it was bent. They told me that they would not be able to fix it but they would have to replace it as they no longer take iPads apart to fix them. The employee explained to me that the reason that my iPad may be restarting when it was moved is that due to it being bent if certain parts inside the iPad are now touching, it can stop the iPad from turning on or cause the iPad to restart. I therefore took the iPad home and decided to try and bend it straight to see if that made a difference and to see if it stopped whatever may be inside the iPad from touching and causing it not to work. I was worried that bending the iPad straight may break the screen but I gave it a go anyway. I bent the iPad back straight and then put the iPad on charge overnight. I took the iPad off charge in the morning not expecting to see it working but the iPad was fully charged at 100% after not being able to turn on for about two months. Now the iPad works perfectly fine. So to anybody out there who might have a bent iPad that doesn’t turn on try and bend it back straight and see if that works. I did not notice that the iPad was bent before taking it to the Apple Store. If for any reason your iPad is not turning on or randomly restarts check if it’s bent and if so, try to gently bend it back straight and it may start working again!!!
This is the awesome video and I love it. Thank you for sharing. But where can I get that thermal camera connector like the one connected to your iPhone in this video? Schematic on computer?
Hello, I think this is what is wrong with my ipad pro 12.9 5th generation A2229, do you know where I can locate the schematics for the logic board? All of my research has come up empty.
Hi I got issue on my iPad 7 just upgraded to 17.4.1 then restart and stuck on the logo, Apple Store diagnosed logic board problem, so for you experience what cause the problem?
Hi, I have just come across your channel and think you are really good in what you do! I am now a subscriber! I was trying to research this problem I'm having with my daughter's iPad 6th gen wifi, when I saw your channel. Her iPad is disabled because she messed around with the passcode. I have tried connecting to itunes/Finder but when attached to my Macbook, nothing happens. It is as if the computer does not detect the iPad. Because of that, I am not able to go into Recovery Mode. The iPad just keeps looping on and off and finally back to the "iPad disabled connect to itunes" screen. I have tried this with two Macbooks, my wife's Windows laptop and several different charging cables so I know these are not the issue. I thought it was a hardware problem (the lightning port) but the iPad could still charge using the wall outlet, just not on any of my computers. I am not based in Malaysia, otherwise I would gladly send it to you for repair. Wondering if you are willing to share what you think is the problem before I send it off to the repair shop (not Apple store).
hello sir, I have an ipad 7th gen thats dead, stuck on .60 amps, checked for shorts no short on motherboard, 5v,3v are available , replaced the tristar still nothing, what could be the issue? any help would be highly appreciated thankyou!!
I just want to know if i could use a logic board from ipad model A1474 and put it on ipad mini model A1432 please help me im stuck on i cloud activation.
Have a ipad 4 with 99.7% no touch movement, just a few seconds it moves , so maybe a very resistant touch filter with high resistance?. I cant see and blown or dark coloured ones and my tips are way too big to test these really tiny components! haha Already reinstalled back to factory reset so dont think its software related and tried another working screen. So will have to keep working on it..
Sir, i swap board ipadpro11 to another, but now problem is rotate screen! If keep vertical it shows horizontal, if keep horizontal it showing vertical 😇 what is the issue pls help?
Hi Lim, i am very interested on the type of mosfet , as I dun understand why it become short when entering voltage(without pressing the on/off switch)....unless it is depletion type, isn't it?
hello brother i got normal values when testing the tristar dock testpoints with multimeter. it pulls only .45amps no power on? what do u think is the issue? no water damage or drop its very clean i inspected board under camera
could you please tell me the best place to buy logic boards? I want to buy old parts to intergrate Ipad LCD and into my desk seamlessly. if you get what I mean?
Hello please help me ive been to so many places and they all tell me its a logic board problem not my battery imwilling to pay anything to get mine fixed i have so many photos i need from my ipad please respond ive emailed you
Lim you are a master at you work, please keep putting out content as I’m learning so much from you !!
Many thanks from the Uk 🇬🇧
you just "Open my Mind"...the first key on Learning...THANK YOU Lim..
Please continue to upload videos. It was easy but exact explaining like a pro. Thanks
Love from India
Great to see you’re back, I really missed your videos. Great video as always.👍
Excellent video. Thanks for posting. Facing a similar issue with A1893 (ipad 6). Drawing current but not charging. Tristar & dockflex testing fine with tester. Very likely will be a bad cap and will confirm with thermal camera.
Very impressive! You're very skilled at this! Thank you for sharing your knowledge!!
What a skilled guy! so much simpler than the other stuff you see online.
I always watching ur video..and learn more about step by step how to repair ..god bless and more video
2:15 to cek point positive
4:55 double cek tools ( rtb and btr)
21:42 for turn on power
Great as usual... sir m happy to see u again with a rare issue.. sir i request u plzz share your work on daily or after 2,3 days plzz !!
Sir, your videos are very much helpful, pls make a video about reballing dual layer CPU , thank you ❤️
very good video excellemt
Excelelnt work.
Thanks for sharing. Hope to see more complicated cases from you.
The last part sneak peek cases... the panic report you had is very interesting.
Eagerly waiting for your videos every day
Great video.
A lot of knowledge
My iPad Pro 10.7 began restarting when I moved it in certain ways and eventually it stopped turning on altogether so I took it to the Apple Store and they looked at it and saw that it was bent. They told me that they would not be able to fix it but they would have to replace it as they no longer take iPads apart to fix them. The employee explained to me that the reason that my iPad may be restarting when it was moved is that due to it being bent if certain parts inside the iPad are now touching, it can stop the iPad from turning on or cause the iPad to restart. I therefore took the iPad home and decided to try and bend it straight to see if that made a difference and to see if it stopped whatever may be inside the iPad from touching and causing it not to work. I was worried that bending the iPad straight may break the screen but I gave it a go anyway. I bent the iPad back straight and then put the iPad on charge overnight. I took the iPad off charge in the morning not expecting to see it working but the iPad was fully charged at 100% after not being able to turn on for about two months. Now the iPad works perfectly fine. So to anybody out there who might have a bent iPad that doesn’t turn on try and bend it back straight and see if that works. I did not notice that the iPad was bent before taking it to the Apple Store. If for any reason your iPad is not turning on or randomly restarts check if it’s bent and if so, try to gently bend it back straight and it may start working again!!!
This is the awesome video and I love it. Thank you for sharing. But where can I get that thermal camera connector like the one connected to your iPhone in this video? Schematic on computer?
thanks for sharing your knowledge
Greetings from Colombia
Sir Thearmal camera model plz
Best video I have seen so far…thank you! Where did you obtain the software / schematics?
Thats great sir, so inspire. Sir can you help me by give ipad mini 6 schematic for free. Thank you for your help
Nice video and nice music master Lim , Thanks!
Great video master 👍
Great video step by step thanks 😊
ZXY havent updated for loong time:( you look at other software all ipad are there, GOOD video my good sir , greetings from south africa :)
U sure? Normally if Apple doesn't leak the official schematic, then no software can label the parts.
such a Great SOP, such a great work Mr Lim
Thank you very much for sharing. Helps a lot! KUDOS!
Hello, I think this is what is wrong with my ipad pro 12.9 5th generation A2229, do you know where I can locate the schematics for the logic board? All of my research has come up empty.
Thank you 💫
Sir you are great teacher
good job master
I have this exact model and apparently it's prone to have the charging circuit to short on a lot of models.
Hi I got issue on my iPad 7 just upgraded to 17.4.1 then restart and stuck on the logo, Apple Store diagnosed logic board problem, so for you experience what cause the problem?
Hi, I have just come across your channel and think you are really good in what you do! I am now a subscriber!
I was trying to research this problem I'm having with my daughter's iPad 6th gen wifi, when I saw your channel. Her iPad is disabled because she messed around with the passcode. I have tried connecting to itunes/Finder but when attached to my Macbook, nothing happens. It is as if the computer does not detect the iPad. Because of that, I am not able to go into Recovery Mode. The iPad just keeps looping on and off and finally back to the "iPad disabled connect to itunes" screen. I have tried this with two Macbooks, my wife's Windows laptop and several different charging cables so I know these are not the issue.
I thought it was a hardware problem (the lightning port) but the iPad could still charge using the wall outlet, just not on any of my computers. I am not based in Malaysia, otherwise I would gladly send it to you for repair. Wondering if you are willing to share what you think is the problem before I send it off to the repair shop (not Apple store).
I got the same problem with board, but the tech chose to replace it so the serial number and storage also change 😢 pls help
Welcome back lim we missing you 🌹
Thanks for new video ...i miss it
Would you recommend the Sugon t26, Jabe ud-1200, Aifen A9 Pro 3in1 , Aifen a22 3in1 or the Aixun t3b?
hello sir,
I have an ipad 7th gen thats dead, stuck on .60 amps, checked for shorts no short on motherboard, 5v,3v are available , replaced the tristar still nothing, what could be the issue? any help would be highly appreciated thankyou!!
great idea thermol cam
very quick and easy! thank you for this tutorial
I just want to know if i could use a logic board from ipad model A1474 and put it on ipad mini model A1432 please help me im stuck on i cloud activation.
I think I have exactly that fault. Do you know the specs of the cap? Because I don't have another scrap pad that I could butcher... ;)
Nice videos Lim, would be great to see more of you.
Thanks for the video Lim.
master prof welcome back
Holy crap! where did you get that schematic from? do they have them for all ipads?
Have a ipad 4 with 99.7% no touch movement, just a few seconds it moves , so maybe a very resistant touch filter with high resistance?. I cant see and blown or dark coloured ones and my tips are way too big to test these really tiny components! haha Already reinstalled back to factory reset so dont think its software related and tried another working screen. So will have to keep working on it..
Hi thanks for the video. I have the same camera it's making noise like camera shutter all the times. It's normal? Or should I return it?
ipad pro 11 2018 LTE, no work camera no flash, no work front camera, any ideas where to start???
Hello, to check if the motherboard of the iphone 5s works, if it works, how much energy should the multimeter show me? Thanks.
Good video. Great effort. Am ur biggest fan
can't wait to watch your next video.
I have learn to many things.If i have money i will come to meet you
Good to see you again sensé. Greetings
Sir, i swap board ipadpro11 to another, but now problem is rotate screen! If keep vertical it shows horizontal, if keep horizontal it showing vertical 😇 what is the issue pls help?
Welcome back sir lim.☝️☝️☝️☝️☝️
Another amazing video my master.
hi, which thermel camera are you using, please?
Hi Lim, i am very interested on the type of mosfet , as I dun understand why it become short when entering voltage(without pressing the on/off switch)....unless it is depletion type, isn't it?
Where can I find the iPad motherboard schematic?
Hi/ great video/ i very like/
give link pls that microscope cam you use?
hello brother i got normal values when testing the tristar dock testpoints with multimeter. it pulls only .45amps no power on? what do u think is the issue? no water damage or drop its very clean i inspected board under camera
Sir can u plzz suggest me that which thermal camera is better with affordable price according you...
could you please tell me the best place to buy logic boards? I want to buy old parts to intergrate Ipad LCD and into my desk seamlessly. if you get what I mean?
Masterclass like always.👍👍👍
It's really great job boos
Hi Lim. Nice video again.
Very good you are great 👍
Hello please help me ive been to so many places and they all tell me its a logic board problem not my battery imwilling to pay anything to get mine fixed i have so many photos i need from my ipad please respond ive emailed you
Nice job
microscope light link send me bro
Does the silent slider gives any sign to replace the battery?
Welcome back🔥🔥 🔥
Hi bro I have a1822 dade no shorts
?
Do more videos sir ❤️👍
Thank you for sharing..👍🏻😊
Great job master Lim.you make repair very easy with your SOP.keep it coming I really enjoy looking at you while you do the repairs
6s dead nand, any way to get gsx data quickly
hi brother.. is it possible to install new cpu on ipad 7(10.2)
i got new A10 cpu when i install its not getting flashed
Thanks for sharing
Good Job, great!
Great job master you helped me fix my iPad
Innovative video❤️❤️❤️
please can you say how many thermtal camera you used in this vedio
one
@@iPhoneServiceMalaysia sorry how money $
great work boss 👍🏽
Nice to see you my friend 😍😍
How can contact you and send my ipad to be repaired by you?
Great bro👍👍👍👍
You're Awesome boss
When will u start online classes master
Great video. What voltage did you use to test the short?
Low. 1V. Whenever such boards draw current at 1V a short must be suspected. Because nothing on there would start up at such low voltage.
Hi master
How r u
Is iPhone and iPad training course different?
Don’t have ipad courses. But they are similar. About 95% circuit design is similar to troubleshoot
Thanks a lot for your positive reply.
Btw where are you from in malaysia
www.iphone-repair.my/contact-us-2/
Hard work and repetitive task over time
Tnk uuu
These videos are a LOT less annoying to watch when there's no music.
❤️❤️🎉
Happy for you lim you baught a new fluke 😂😂