As a beginner, my weakest area is in diagnostics... "Where do I start?" This is just the right speed, and perfect content for people at my level of skill. I hope you continue putting out really good content like this, and your channel will quickly grow.
I wish i was smart like you. Im homeless and trying to learn repairs in an old sea container. So i get laughed at alot. But i will keep on trying to learn. Thank you for this awesome video. Subbed and liked.
Thanks for the video ! This is exactly what type of video I need . Very practical for us beginners . Gonna check out the rest of the channel. Already liked and subscribed!
I always had a thermal camera, dc power supply, and freeze spray. Never really knew enough about how the electricity worked, or how to use ZXW.. But if I visibly noticed a bad component I was the best at replacing them, thousands of successful repairs. I only really ever had some ran-over or liquid damaged devices that would get so bad I couldn't find all the shorts to fix them or I probably could have safed more. I like the way you explain things, reminds me of me. Nice vid. Keep it up.
I have an iPhone 7plus that’s restarting on the apple logo. When I tried prompting it up to boot. It started reading normally then got stuck at 0.24 -28 and couldn’t pass there. Can you give a tip on how to fix that? And please you should start doing videos on these recent apple models like Xmas and 12 and how to diagnose, separate, and fix them up. Thanks, Dusten I really find your video series very useful
I like how you are actually describing the troubleshooting process and why you're doing what you're doing. Most other videos just show what they're doing. But I watch it and then well how did they know to do that. How did you learn all this stuff? Electrical engineering school?
Does ur dc power supply allow u increase amp while still connected to a shorted board...that is to say if my a board draws 0.450 am on a shorted device does it allow u put in more current to locate the short quickly???? I need a dc power supply that why i need to know
Hi Dusten, I really like your videos great they help me more than anyone else that i have seen. but what if we do not have that great board view to show whats connected on the board.
Hi hey I have a question what if after you boot to prom you don't get any change on the power supply ? Now I am talking about a board that is dead no power no boot and there is no visual damage any where. Like on a iPad air 5 gen????? Please help
What is the max current during boot? I have an iphone 13 pro that starts at .1, jumps up to around .2 during apple logo, the jumps up and down to about .7, up and downto .8, up until my meter pegs out and my 1.5 A power supply cuts out. Any reply would help me know where to begin looking.
How did you know the insdie row was positive and the outside row negative? Just from experience? Cuz I did not see anything on the ZXW diagram that said so, thx UPDATE: I think I see now, the inside row is red on the diagram, indicating the power/hot line or + correct? And the outside row shows as gray or -
@Dusten Mahathy I love this Video a lot for almost a year i have been trying to find a better and best way to use a Dc power supply i am so glad that your video has given me a general idea on more knowledge. Anyway is there a way you could be my teacher. at a Fee ? I am in Africa and i am new in Micro soldering. but want to upgrade myself and dont know where to even start from. please if yes then i will like to contact you privately. Thank you so much.
There was an iPhone 7plus I tried to fix up about two months ago. I tried reading it with a dc power supply. But even before I could press the power button it's started counting 0.8. Any idea how that's gonna get fixed. And please detail on half and full short
hey bro .. great video ..just wanted a small help .. here is my question .. 1) I want to power my Ipad through my dc power supply(5v 2 amps) .. now my ipads battery is dead .. so I wanna power and boot up my ipad using my dc power supply .. well on the motherboard there are 4 pins(mine is ipad2) .. could u please tell me .. if I could power my ipad by connecting 2 wires from my dc power supply? .. i will solder it on the ipad2's motherboard .. if by soldering 2 wires could solve my purpose .. which pins on the motherboard do i need .. 1 for positive and the other for negative ( ps : there are 4 pins on the motherboard that connect to the 4 pins on the battery of ipad 2) .. could u please help me bro !!!! Regards Rahul
Nice explanation bro . I did subscribed . If you have extra thermal camera and other tools can you please give me them . I dont have money to buy . Stay safe & Healthy
As a beginner, my weakest area is in diagnostics... "Where do I start?" This is just the right speed, and perfect content for people at my level of skill. I hope you continue putting out really good content like this, and your channel will quickly grow.
True that sir 💯
@Richard Spears im starting to.
Im not to smart so i have a hard time. Microsoldering i do manage but i have no hot air etc so i cant practise ...yet.
I wish i was smart like you.
Im homeless and trying to learn repairs in an old sea container.
So i get laughed at alot.
But i will keep on trying to learn.
Thank you for this awesome video.
Subbed and liked.
Great job! You are the only person in RUclips who really explains how to diagnose an iPhone, appreciate it!
Thanks for the video ! This is exactly what type of video I need . Very practical for us beginners . Gonna check out the rest of the channel. Already liked and subscribed!
Thank you. I found a dead capacitor on my iPad and managed to remove it. Works perfect now. Thank you for sharing your knowledge.
I always had a thermal camera, dc power supply, and freeze spray. Never really knew enough about how the electricity worked, or how to use ZXW.. But if I visibly noticed a bad component I was the best at replacing them, thousands of successful repairs. I only really ever had some ran-over or liquid damaged devices that would get so bad I couldn't find all the shorts to fix them or I probably could have safed more. I like the way you explain things, reminds me of me. Nice vid. Keep it up.
Thanks man. I really appreciate I will download it straight up now to my gallery so I can study it carefully. Thanks
Highly educational. I enjoy your style of teaching, Dusten. Keep up the good work.
Please don't get mad I ask too many questions. I just find your video very useful and very simple to follow... Thanks man
I welcome the questions :)
@@Dusten04 do you have WhatsApp so I can privately chat you bro
I have an iPhone 7plus that’s restarting on the apple logo. When I tried prompting it up to boot. It started reading normally then got stuck at 0.24 -28 and couldn’t pass there. Can you give a tip on how to fix that? And please you should start doing videos on these recent apple models like Xmas and 12 and how to diagnose, separate, and fix them up. Thanks, Dusten I really find your video series very useful
Thank you very much. I learnd some things here that I didn't know yet. Best regards from Germany
Hi Dusten. Thank you for these information.
Excellent video Dusten. Thank you.
I love your video... it’s really helping me alot as a mobile phone engineer
Great video, very helpful. Thanks! Looking forward to see more educational videos from you.
You make mobile repair sound so easy. I really should leave my comfort zone (MacBooks) and try them.
I find MacBook easier as well :)
I like how you are actually describing the troubleshooting process and why you're doing what you're doing. Most other videos just show what they're doing. But I watch it and then well how did they know to do that. How did you learn all this stuff? Electrical engineering school?
👏🏻👏🏻👏🏻 straight to the point!
Dusten , berry good information , than you.
Thank you for this! You are a great instructor!
Thanks man :)
@@Dusten04 pls do you run online classes?
Great vid.
Thanks for the video
Does ur dc power supply allow u increase amp while still connected to a shorted board...that is to say if my a board draws 0.450 am on a shorted device does it allow u put in more current to locate the short quickly???? I need a dc power supply that why i need to know
Hi Dusten, I really like your videos great they help me more than anyone else that i have seen. but what if we do not have that great board view to show whats connected on the board.
Thank you for your helpful video
You’re appreciated my boss
Good job brother!!!!!!
great video!
I like you way
Thumbs up
I’m First🤣 glad you done a new video because I love your channel.
I just found your channel. what a great video! thank you so much! got 1+ subscribe!
Hi hey I have a question what if after you boot to prom you don't get any change on the power supply ? Now I am talking about a board that is dead no power no boot and there is no visual damage any where. Like on a iPad air 5 gen????? Please help
Would you recommend the Sugon t26, Jabe ud-1200, Aifen A9 Pro 3in1 , Aifen a22 3in1 or the Aixun t3b?
I seen your video. Straight described you channel. Your video and knowledge is to helpful for beginner like me. Please keep it up. Thx 😊 🙏
hi please waht mat ist that black and blue ipad is laying on? thx !
Ty for the tips and adea sir you deserve more subscribers
Nice reference mate
Thank you 🙏
You’re welcome 😊
Ur great bro I am from india
What is the max current during boot? I have an iphone 13 pro that starts at .1, jumps up to around .2 during apple logo, the jumps up and down to about .7, up and downto .8, up until my meter pegs out and my 1.5 A power supply cuts out. Any reply would help me know where to begin looking.
Hi my Dear, great video
Can directly solder 2 wire from power supply to battery connector 4.2v?!
How did you know the insdie row was positive and the outside row negative? Just from experience? Cuz I did not see anything on the ZXW diagram that said so, thx UPDATE: I think I see now, the inside row is red on the diagram, indicating the power/hot line or + correct? And the outside row shows as gray or -
Good stuff brotha, hey do u have to replace a cap ? is it really necessary?
very informative video Bro... keep them coming :-)
👍
Is that sugon dc power supply any good?? Would you recommend them? Thanks rich
Yeah, it’s been great for me
@@elanellison401 thanks I appreciate the help, I’m going to buy one because my old one packed up. Honestly Thanks so much. Rich
Very good video
@Dusten Mahathy I love this Video a lot for almost a year i have been trying to find a better and best way to use a Dc power supply i am so glad that your video has given me a general idea on more knowledge. Anyway is there a way you could be my teacher. at a Fee ? I am in Africa and i am new in Micro soldering. but want to upgrade myself and dont know where to even start from. please if yes then i will like to contact you privately. Thank you so much.
i need more explanation on how to use dc power supply
About time 😂
Thanks bro
There was an iPhone 7plus I tried to fix up about two months ago. I tried reading it with a dc power supply. But even before I could press the power button it's started counting 0.8. Any idea how that's gonna get fixed. And please detail on half and full short
If you watch my videos, I answer those questions
@@Dusten04 which
now this is a repair,
Hi dusten can you send me the link for the DC power supply you use in this video please?
www.aliexpress.com/item/4001365544174.html
How to Use Ipad lightning power not use battery ?
What Dc powersupply is that ?
Hi.sir please can u do android dead troubleshooting way please
Can you lecture some online…. Do run online classes??? Pls reply asap
proof
hey bro .. great video ..just wanted a small help ..
here is my question ..
1) I want to power my Ipad through my dc power supply(5v 2 amps) .. now my ipads battery is dead .. so I wanna power and boot up my ipad using my dc power supply .. well on the motherboard there are 4 pins(mine is ipad2) .. could u please tell me .. if I could power my ipad by connecting 2 wires from my dc power supply? .. i will solder it on the ipad2's motherboard .. if by soldering 2 wires could solve my purpose .. which pins on the motherboard do i need .. 1 for positive and the other for negative ( ps : there are 4 pins on the motherboard that connect to the 4 pins on the battery of ipad 2) .. could u please help me bro !!!!
Regards
Rahul
Nice explanation bro . I did subscribed . If you have extra thermal camera and other tools can you please give me them . I dont have money to buy . Stay safe & Healthy