Hot air gun is one of the most frequently used tools in phone repair and the technical requirements for technicians are also very high. Please leave your thoughts on how to use a hot air gun properly in phone repair. 👇👇👇 SUGON 8620-DX Straight And Spiral Hot Air Gun: bit.ly/3iVThXx REWA Academy Motherboard Repair Live Course Entrance: bit.ly/3sERMAx
Hi. The hot air gun that you are advertising has a very strong problem - within the time of use it's airflow decreases up to 50%. So this airgun becomes less efficient. Hense can be recommended as the brst.
Great video my only comment would be that all hot air stations are a little different based on the age of the heating element and quality of the air pump so the biggest tip is get to know YOUR hot air station
I have the same station and manage to desolder analog stick from dual sense\PS5 controller at my first attempt but 420C degrees at 42 airflow was a bit too much. I have a lot to learn.
All air gun is good if the heating element is good and soldering and desoldering components depends on the experience of the technician. If the airflow is high chances are small components will fly away.
Yep, makes a lot of sense. It seems that also partially why REWA covers up other components with the kapton tape to prevent unnecessary melting. Also, I have seen some videos regarding removal of excess solder and it suggested simply blowing it away.
I have the sugon 8620 dx but am having problems when it comes to reballing ic, I even bought the 3d stencil but balls don’t form the stencil just deforms anyone with help and what to use for reballing
It appears that the difference is the nozzles, I hear about this and from my experience as long as you have a hot air station with the blower fan in the case and it has nozzles available you're good, and small components are easy enough with my atten st862-d. I use the bent nozzles the most but on really large chips I use the biggest nozzle. I don't have special nozzles but if atten made some I'd try them, maybe the idea is to keep the small parts from blowing away.
It wouldn’t make the air dissipate as evenly, if it were a funnel it would focus it on the center of the chip, it would however be good for resistors and capacitors
Hi, the nozzles of SUGON 8620 are specially designed to achieve switching wind type by changing the nozzle while 861DW is not equipped with this kind of nozzles.
@@rewatechnology2008 Isn't description in video wrong? At 0:23 it says that 861DW is "helical wind" but 861DW has only straight nozzles. Shouldn't it be marked as "vertical wind"?
I have it too, bought on AliExpress. It cost me extra £3 to get 3 angled nozzles and 2 helical (non-angled) ones. Depends on the seller whether helical nozzles are available I guess.
@@rewatechnology2008 Hey like your content But I have an iPhone 8 Plus which was water damaged and whenever I connect the screen without the home button flex cable the screen works fine. But when I connect the home button flex cable the touch screen stops working! Please do you know what am dealing with?
Hot air gun is one of the most frequently used tools in phone repair and the technical requirements for technicians are also very high. Please leave your thoughts on how to use a hot air gun properly in phone repair. 👇👇👇
SUGON 8620-DX Straight And Spiral Hot Air Gun: bit.ly/3iVThXx
REWA Academy Motherboard Repair Live Course Entrance: bit.ly/3sERMAx
you must start in india as well in city like bangalore its bhooming like anything in will look forword to work with you in bangalore
Hi. The hot air gun that you are advertising has a very strong problem - within the time of use it's airflow decreases up to 50%. So this airgun becomes less efficient.
Hense can be recommended as the brst.
i used your tools in all my videos. Good quality
Great video my only comment would be that all hot air stations are a little different based on the age of the heating element and quality of the air pump so the biggest tip is get to know YOUR hot air station
Quick TR 1300 VS Sugon 8620DX ?what your choice?
Can use this to weaken surface lcd display?
is this model still suitable for use? Or is there a new recommendation?
Она разваливается, видео мастеров по ноутбукам посмотрите
Explanation is too good ❤love it
What about temp used to melt glue on back of iPhone when you want to replace broken glass?
Are there such things as portable or cordless hot air gun?
Atten or quick?
Can u suggest some models with vertical wind
Which type is suitable for BGA reball
This is the best tutorial phone repairing.. I wish I can school to repair android phone.8.8
😭😭😭
for nand with nozzle big or medium?
Youre the best. When will you have seminar
i Feel like giving you guys a 100million likes
Rewa one of the best hands kill platform
thanks for this im using sugon 8650
I have the same station and manage to desolder analog stick from dual sense\PS5 controller at my first attempt but 420C degrees at 42 airflow was a bit too much. I have a lot to learn.
What is the recommend temperature and Airflow to use for CPU takeout and reball for Same Hot Air Gun Sugon 8620DX????
I love Rewa
Which can be used?
very very important and useful knowledge.thank u sir.
All air gun is good if the heating element is good and soldering and desoldering components depends on the experience of the technician. If the airflow is high chances are small components will fly away.
Yep, makes a lot of sense. It seems that also partially why REWA covers up other components with the kapton tape to prevent unnecessary melting. Also, I have seen some videos regarding removal of excess solder and it suggested simply blowing it away.
Best hot air gun and Nice video
I have the sugon 8620 dx but am having problems when it comes to reballing ic, I even bought the 3d stencil but balls don’t form the stencil just deforms anyone with help and what to use for reballing
Kindly teach how to unlock iCloud from hardware of iPhone XR.🙏🙏🙏
can i just use atten 826d ?
Very good information🙏👍
Im using Atten . Sugon look cool
what do you mean vertical vs helical wind? airflow is airflow or not?
It appears that the difference is the nozzles, I hear about this and from my experience as long as you have a hot air station with the blower fan in the case and it has nozzles available you're good, and small components are easy enough with my atten st862-d. I use the bent nozzles the most but on really large chips I use the biggest nozzle. I don't have special nozzles but if atten made some I'd try them, maybe the idea is to keep the small parts from blowing away.
@@techdoc.repair Yeah, i use the same method, small components small nozzle, big components big nozzle.
I got a $40 Chinese hot air gun, that almost melted on me turning red hot. It's a bad product right?
Thanks thanks rewa
Please review quick 857dw+
Faz vídeo com a temperatura da estação Quick TR 1300
your videos are very helpful. thanks!
Nozzles size?
That video is very helpful Good job.
Awesome video clip and thank you so much for sharing
just buy this stil trying to learn solder and desolder
How much is the hot air gun??
shop.rewa.tech/detail/sugon-8620-dx-straight-spirial-hot-air-gun.html
I never knew that.well thank you.
How to unlock the device, it's locked, can't go to settings
Thk u alot
Very Inspired Thank a lot 🔥🔥🔥
Tech legends 🥰
Thank you very much, I used it a lot❤❤👏👏🌹🌹
You are a boss of smartphone
Respect 💪
Subtitle in frenche please bro
Comment faire pour réparer un iphone qui a perdu sont e-mail
Faut chauffer Google!
why the nozzles doesn't have a funnel shape for a good air flow ?
It wouldn’t make the air dissipate as evenly, if it were a funnel it would focus it on the center of the chip, it would however be good for resistors and capacitors
Vertical Wind: 13-18 sec.
Helical Wind: 40 sec.
How do you can change Wind type (turbine) by changing nozzle? And why do you cannot make the same at 861DW? They confused me with the video.
Hi, the nozzles of SUGON 8620 are specially designed to achieve switching wind type by changing the nozzle while 861DW is not equipped with this kind of nozzles.
@@rewatechnology2008 Isn't description in video wrong? At 0:23 it says that 861DW is "helical wind" but 861DW has only straight nozzles. Shouldn't it be marked as "vertical wind"?
Good quality
3:08 いつも設定を適当にやっていた。これを参考にしてみます。
Oaoa
Gold! 👍
does the blower atten st-862d include halical wind?
It depends on the tip used, you can purchase with helical wind tips yes, I have this station also.
@@GO-lo4tv wow nice to meet fellow atten users, I hope I can find a facebook contact so I can exchange ideas about blower atten
I have it too, bought on AliExpress. It cost me extra £3 to get 3 angled nozzles and 2 helical (non-angled) ones. Depends on the seller whether helical nozzles are available I guess.
thany you
Great 👍
Nice
Love to purchase a Sugon. Unfortunately the shipping cost is $150 to my country.
1
11
1
Qqqq}
What country are you in?
Air gan model number
need to training from bangladesh in your center
🎉Спасибо.
Thanks 😘😘😘😘
How to remove iCloud in iPhone 11
Very relevant question to subject. Thanks super hero.
You can Bypass, but so far not remove
@@Daniel-fr3us how 🤷🏻
Made a second part
When not used in a vertical way, it takes a long time to remove the components, and this causes great damage to the board, so what is the solution?
Hi, you can try to protect the board by applying high-temperature tape.
Bring nozzle closer to component
@@rewatechnology2008 Hey like your content
But I have an iPhone 8 Plus which was water damaged and whenever I connect the screen without the home button flex cable the screen works fine. But when I connect the home button flex cable the touch screen stops working!
Please do you know what am dealing with?
@@Coleman_Unlocks Hi, thanks for your support. You can try to replace the connector of the home button flex cable on the motherboard.
Have solution for u without changing home plug
dirty f phone i have same problem
I love you
Now you have a microscope occasionally
2:22 u fucked up the mother board bro
Its not sodder its SOLDER
K K ELECTRONICS
♥️♥️♥️👌👌👌👍🏻
Wtf 🤬 365* c cpu the end
i make my own, with only $12
1st comments
thanks