Troubleshooting Guide: How to Fix Your Troy-Bilt Storm 2410 Snow Blower That Won't Start
HTML-код
- Опубликовано: 25 авг 2024
- Troubleshooting a Troy-Bilt Storm 2410 that would not start.
Thank you for watching. If you have any questions please comment below.
#smallenginerepair
Patreon: patreon.com/us...
TikTok: / smallengine
Join our Discord server: / discord
Facebook: / coloradospringssmallen...
Instagram: www.instagram....
Small engine repair in Colorado Springs, CO that works on lawn mowers, tillers, generators, snow blowers, chainsaws, weed eaters, leaf blowers, augers, go-karts, and mini bikes. We provide tune-up, blade sharpening, oil changes, spark plug replacement, air filter cleaning, and replacement, carburetor cleaning, and general maintenance.
Thanks for the video. I could not get to start even after flushing the fuel accidentally exceeded electric start limit. Thought it burned up. But it just required a rest period. Wheww. All I needed to do was take the carburetor off and have the dirty brown fuel drain out. Reinstalled Put new gas in and fired right up. Works like new.
Glad it helped
Thanks for the overview, I was struggling with how to best get that plastic shroud off so I could get to the carb.
I didn't store mine properly and it's been two years since we got a decent snow. I just needed to clear the jets in the carb and it fired right up and ran like a champ. It could have been much worse; lesson learned to not be lazy and just properly prep my engines for off seasons.
Glad I could help!
So I have the same engine on a TroyBilt 2410 with a 179cc MTD engine. I have spark, good gas, been using it already this winter, so gas has been fresh, and absolutely no start. I checked and pulled the flyweel, and it was not out of alignment with the key. Compression seems to be super (120-130 lbs). Why is this guy not starting? Spark plug is sparking, with a steady blue spark. the tester has like an orange/red glow. Even when I spray starting fluid or put gas directly int the carb, no start. Any ideas? Thanks.
Check the valves. Remove the valve cover and visually inspect to make sure something isn’t broke. If not, try starting and make sure the intake and exhaust open and closes. If they do, check the valve lash.
@@small_engine_repair Hello, and thanks for your response! I did remove the valve cover and checked the valves. Not the lash (.04-.06) I think, but there was nothing amiss, and both functioned fully and more or less equally. My next move is a new plug, but the plug had a pretty hefty spark. So there. Thanks again, pal!
It might sound crazy but happened to me, make sure that lol plastic key is pushed all the way in! Had me mind boggled for a good hour! Mine was hardly out but a bit! Just an idea
Or take it in for maintenance .
Yes
no.
The manual says not to fix it yourself. 🤓
It probably says bring it to me :-)
@@small_engine_repairI need to bring it to you, I'm experiencing the same issue with the blower not starting.... Guess it's shovel time