Simple Tutorial - Ortho4xp
HTML-код
- Опубликовано: 29 авг 2024
- In this tutorial I will show you how to download and install Ortho4xp and get your Ortho photos into X-Plane with ease. This tutorial is meant to be quick and to the point, with no extras, to get you back flying as quickly as possible with great scenery. I hope new people to X-Plane and Ortho4xp find this tutorial useful.
What You Will Need
- 7Zip - www.7-zip.org/
- Notepad++ - notepad-plus-p...
- Google Earth Pro - www.google.com...
- Ortho4xp - drive.google.c...
Quick Video Links
Build multiple squares in Ortho (5:20) - • Simple Tutorial - Orth...
Organize Scenery_packs.ini (10:26) - • Simple Tutorial - Orth...
Build higher level Ortho around airports (15:34) - • Simple Tutorial - Orth...
-----------------------------------------------------------------------------------
Download sim content from this video for FREE ►► ravensimulation...
-----------------------------------------------------------------------------------
Website ►►ravensimulation...
Discord ►► / discord
Twitter ►► / ravensimvr
Instagram ►► / ravensimulations
Facebook ►► / raven-simulations-1047...
-----------------------------------------------------------------------------------
My Setup ►►ravensimulation...
-----------------------------------------------------------------------------------
VR DEVICE
Oculus Quest 2 ►► amzn.to/3h1S7rD
-----------------------------------------------------------------------------------
FLIGHT CONTROLS
Honeycomb Yoke ►► amzn.to/3GYEJza
Saitek Pedals ►► amzn.to/3I1n5fC
Wheel Stand Pro ►► amzn.to/36s6a8d
-----------------------------------------------------------------------------------
DRIVING CONTROLS
Thrustmaster T300RS GT Edition ►► amzn.to/3BwLiIn
Thrustmaster GT3 Wheel ►► amzn.to/3sHXJwQ
Wheel Stand Pro ►► amzn.to/36s6dkp
-----------------------------------------------------------------------------------
#xplane11 #ortho4xp #flightsimVR
![Ortho4XP 1.30 | How to COLOR CORRECT Miscolored Areas in Photoreal Scenery [Tutorial|X-Plane 11]](/img/1.gif)
It has been brought to my attention I overlooked something in my tutorial. If you are going to bake 1 tile, there is 1 more extra step you must do for the overlays to work @new holland
This was brought up on steam from user : Originally posted by BigKangaroo3:
I notice you had a question from 'new holland' on your RUclips page around the Overlays.
He may have tried to create/bake a single tile, not 4 like you showed in your video.
When creating/building a single tile and selecting 'All in one' to work through the 4 steps listed (Assemble Vector data - - Build Imagery/DSF), the Extract Overlays step is not included.
When building a single tile, after selecting 'All in one', the user needs to go to the 'Tiles collection and management' window (World Icon) and select 'Extract overlays' only and hit the Batch Build button as the very last step in creating the tile.
So, in truth, ALL IN ONE... isn't all in one. In my opinion if you wanted to bake one tile or 20 I would just use the same method of shift clicking a tile, selecting ALL checkboxes and building. Its just easier. Sorry for the confusion.
**If you followed the tutorial and built more then 1 tile this doesn't affect you.**
No , I looked for Y overlay folder in the path custom synergy I gave it in setting but because of some reason the folder is not created, I will remove all loaded z folders and redo it one more time I may get lucky this time. :)
FINALLY!! an easy, quick and to the point tutorial. Great work!!
This is a great tutorial!! Thank you. Other tuts are a bit more complicated, but this was much easier. Thanks again.
Thanks for watching!
Thanks, the thing that help me on your demo was the explanation of lack of details shown at ground level vs what you see as you climb higher. Until I seen your video explaining this, I kept thinking something is wrong with my setup not set in with my Ortho4xp. Now I realize this is the expectation. I don't recall anyone else in other Ortho4xp videos explaining that. So until now, I had been wondering if they had other custom sceneries loaded. Thanks, this was helpful for me.
Ortho4XP is a horrible half-baked unfinished bit of code, so tutorials like this are helpful in overcoming the clunky and old-fashioned experience
kinda late but this deserved a sub, thank you!
Thank you a lot for this tutorial. Step by step clear for beginner users like me ;-)
Glad to hear that!
I havent use it yet but looks great and useful, thanks for it!
If you preview with OSM from the drop down you can easily find Airports... I think S - M stands for Street Map
yep. open street map
This was SUPER helpful dude, thank you!
Glad it helped!
Great video thank you, subbed
Also loved your VR optimization video, ty!
I think what is needed is some sort of facility in Ortho4XP that does a better job of blending the tile edges with the default scenery. Perhaps that is Ortho4XP 1.40!
there is a way to do this adding the ortho into the airport. I have a new ortho video coming very soon, I'll let you know when its up and I'll be mentioning this.
Great tutorial. It was really helpful. Thanks a ton.
If you go to the settings page, in the upper right under DSF/imagery, change (high_zl_airports) to true, or icao then the third button down (cover_zl) select the zoom level you want around the airports. icao only finds airports with an iaco and leave smaller airfields alone... Happy Landings everyone
Hi Thank you very much. I have tried to gat V 1.30 to work watching 6 other videos-ALL FAILED. Yours worked first time-WHY? Small steps good explanation of EACH STEP and you stayed on ONE task. Geoff
Extremely helpful. Thanks!
Bravo ! 1000 thanks !
Bravoo!!!!!!
Thanks.
You know it’s a simple tutorial when it’s 30 minuets
I take it you haven't seen the "other" tutorials for it? ;) trust me, this is the quickest version.
great video. thanks for the tutorial.
Great video! What water pluggin are you using?
Default water.
@@RavenSimulations Do you use any other plugins for enhancement from the .org forum? HD forests, Airport HD etc... Where do you buy your planes? Do you have an affiliate link. Love to buy from you to support your work!
Weirdness... but I really like that we dont have to use XPlane drive for all the downloads... Im wondering why you didnt fill in the Cusrtome scenery folder in Ortho ? cuz u used shortcuts ??
Thanks so much for this - this gave me the keys to getting it working.
Just one question - could you give some basic clue as to how you manage to capture the video and audio from within VR? Running OBS on the same computer as the Oculus and XP11 ruins the frame rate and I have seen references to capture on a second PC. What are the available options and is there a configuration that would allow at least a low-res capture to be maintained on the same computer as XP itself?
so obs either uses CPU (which would kill xplane) or your video card (which mortally injures x-plane) to compress video. I capture all my VR and games on a seperate pc. You would definitely take a framerate hit in vr doing capture on the same pc with OBS
Every time to try to make a tile it gives me mesh failed and never works.
I run the program but I have a problem with the Elevation data.
As you can see from the screen shot below, Min and Max altitude is at 0.0.
Loading elevation data and smoothing it over airports.
Downloading ..\Elevation_data\+30-110\N39W105_NED13.img from USGS.
* Min altitude: 0.0 , Max altitude: 0.0 , Mean: 0.0
Causes some pretty funny images when flying. I have a scenery pack for KAPA in Denver which is at 5880'. When I take off, I fly a mile or two into the other scenery which is 5880' BELOW ME.....
Or, if I take off from an airport in the scenery, then the airport pack shows like a MESA 5880' above. It's a virtical wall up to that airport.
Any Help on why I'm not getting the elevations in my files?
i'm not sure what is causing that. You can match your settings to my discord under x-plane has a screenshot of my settings to get good elevation. If its still wrong it could be wrong from the source where its getting the data from.
great work but I got this error all the time C:/X-Plane 11/Global Scenery/X-Plane 11 Global Scenery\Earth nav data\+40-130\+47-123.dsf absent. Recall that the overlay source directory needs to be set in the config window first. any idea how to fix it?
Thanks, this is really good walkthrough. I downloaded a small area (in Southern Ireland) and it looks good but it forces the ground to be flat. I tried different custom_dems but no luck. Any tips on what I need to do? Thanks.
I'm not sure if the custom_dems work outside USA. I know for sure and something I may have left out of my video is NED 1/3 only exists for USA. I'll look into what people have been using there and see what I can find. currently I'm moving atm so I won't be able to get to it until March. I plan on doing more videos with more consistency then. Sorry I'm not much help.
Thank you for the tutorial! I am having a problem though. I follow your steps up and including creating a shortcut on my desktop for the Ortho app but when I double click it to open the program nothing happens. Any suggestions?
hmmm. I'm not sure. It should do 1 of 2 things. 1. Run something, even if it crashes it should attempt to run Ortho. OR 2. It should say that the shortcut isn't linked to anything. I would try to run the program without a shortcut, just from the directory and see if that works.
Raven's Planes Thank you for the quick response! I did try that. No luck. Is there a security setting perhaps?
Could you make a video about what each option in the settings menu mean? I know that to make lower resolution ortho look better you need to set use_decal_on_terrain to true, but i don't know what most of the other options mean.
I'll look into it. There is a lot of options in ortho but I just set out to make a basic quick tutorial for it. maybe I'll make an advanced one soon.
Hi there, fantastic video thank you. If you were going to work through a larger area to complete would you still complete 4 at a time? or should I just do all 100 at once?
I do like 20 at a time... the ortho comes from government servers and external sources. They go down from time to time... best to complete 20 then have it hang on one for a long amount of time thinking its building 100 ;)
@@RavenSimulations I have followed your steps by either my expectations are too high or it didn't work. I have done the first part around sydney, then gone in and zoomed in and done red squares for max detail around the cbd but it looks like it didn't work? ibb.co/RSYZx8h
@@RavenSimulations Here is the settings... ibb.co/album/iGXwTv
Any help would be great as I'm stuck
sorry for the late response, but sometimes areas may not have that level of detail. You can select 19 but if there are no satellite from the provider at that resolution, it will pick the highest and use that.
So if your using forkboy and you want to make airports at 18 and 19 , will it work ?
I'm sorry I've never used forkboy's stuff so I am unsure if it will work.
@@RavenSimulations sorry, so you cook your own ortho
@@PilotDaveAviation Yes and I have a tutorial here on it, thought I should update it ruclips.net/video/jg7A1PoZD34/видео.html
@@RavenSimulations thank you !
Nice explanation but its saying im missing textures. Is it me just still downloading a different country?
Great video what is that pluging in what showed you your FPS please
There are a couple. If you fly in VR you need Avitab (don't leave home without it) You can get that here - forums.x-plane.org/index.php?/files/file/44825-avitab-vr-compatible-tablet-with-pdf-viewer-moving-maps-and-more/ Also you should check out this video where I optimize VR and the oculus OVR tool which also has FPS on it - ruclips.net/video/GlxLjyLjnk4/видео.html
@@RavenSimulations I just fly with monitors not VR
@@craigmiotk5689 there are many programs for framerate in non-vr. Steam has it built in and there is a checkbox in the settings and so does the nvidia tools has a checkbox to show framerate. You can also turn it on in the data table inside x-plane as well
Well i made an attempt to create 2tiles. Got a error mesg. saying could not execute code because MSVCP120.DLL missing. I check ortho4xp download and only see MSVCP140.dll tried download again same results. is there a newer version of 4xp 1.3 if so where can iget it
I haven't seen that error before. I built a few tiles a couple days ago. There hasn't been an update to Ortho4xp in a long while. I'm pretty sure the dev went on to do other things and what we have is what we have. Googling that dll, seems is part of the C++ redistributable packages (used in all kinds of games/software) You can try reinstalling it. - support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
At the end when I was loading a flight, I got 2 error messages saying they could not find a .dds file. So, I tried again but this time I sat there and watched the process. Sure enough, I got pages and pages of warning saying "Could not convert texture [file location][file name].dds" (brackets are mine). It did these for all of the 4 sections I picked. I know this video has been up for quite a while now but I still hope someone is still reading the comments and can help.
sounds like it either didn't get the ortho images, or the are located in the wrong place
@@RavenSimulations thanks. I totally removed any part of the Ortho4XP installation and I actually notices some error messages early in the installation process. One was "MSVCT120.dll was missing". All .jpg files are missing. Are you sure that the Ortha4XP is has not been corrupted somehow?
I took a screen shot with the very first sign of a problem: "OSM server DE rejected our query".
What should i do if there is no yOrtho4XP_Overlays file?
sounds like your global scenery/xplane 11 global scenery file didn't get set or saved - ruclips.net/video/jg7A1PoZD34/видео.htmlstart=203
@@RavenSimulations i set that up now what should i do?
@@newholland5478 follow the tutorial, since it didnt build overlays you have to rebuild is my guess
@@RavenSimulations Ok. Thanks for the quick replies.
When I download Ortho, I just get a white folder. Or if I do get the full download the .exe isn’t there. Does anyone have any recommendations on what I may be doing wrong? Thank you in advance
make sure you use the link in this video description so you are getting the right 1.3 version. The .exe file is in the ortho4xp/binaries/ folder
I've tried to do areas of Tennessee and am only filling up 2 bars of the 3 in Ortho4XP. What's the third bar and how do i do it??
Also, my textures tiles are black and white.
Not sure what bars you are talking about?
Raven's Planes the three completion bars under “assemble vector data” and “3D Mesh”. It only loads two of them when I do batch build.
After running through your tutorial step by step, and not finding any change in scenery. I have noted that during the download I keep getting an apparent error message that the" OSM server DE has rejected my query" over and over. I am using GO2 for imagery. I do get Ortho files after the process finishes which I make a shortcut, etc. as you advise to finish up. Any idea what the problem is?
sometimes the servers go down that have the data. I would try bing and see if that works. Or try again later and see if the server comes back up.
@@RavenSimulations Thanks... will do. Your series has been a great help both for Ortho4xp and VR.
unable to see yortho4xp_overlays on my orhto 4xp folder what I did wrong?
If you only baked 1 tile, for some reason it doesn't create overlays... OR you didn't set your overlays folder and its in the ortho4xp folder instead of where you want it.
XP11 loaded quickly, what’s your build? Is your XP11 in an SSD?
that would be video editing ;)
Lol. So it takes a long time for you to load up xp11 as well huh. Thanks
@@jonharleyfamador4302 The first startup is always the longest. If I close it and restart its faster. But ya... always some time waitin' in there... I figure my viewers shouldn't wait ;)
I keep getting ‘Waiting for here value to be updated’ in my code? What does that mean?
I'm not sure I have never seen that error. What source are you using for ortho and what ortho are you trying to get (location)
Raven's Planes Arc and North East of England
When I Installed Ortho4xp I did Not get the Y folder
It didn't create one when you ran it?
@@RavenSimulations no it never works after I follow every step all it creates is a flat ortho photo on my world
I did run into an issue recently building ortho in Montana, I was using the 1/3 Ned elevation data but it came out flat. the reason was there is no 1/3 Ned data. I changed it to 1 Ned which is lower resolution which then fixed it because that data existed. some places don't have the same resolution data, especially outside the USA... and even some inside usa...
Well, I don't see any difference! , have you done it right?, how you could get your Y folder by that setting?, you haven't built the all in one download after you used the all in one, I still don't understand how could you make it work, if you say so. Sorry your video is incomplete.
see pinned comment. if you are just building 1 tile you must do all in one button.
I tried it but it didn't create overlay folder, I think because I gave a path to be loaded also in costume cinerary , I noticed the entire map appears in X-Plane " Flat " is that because I don't have the overly? Another question abut the appearance , is it flat, or 3D like Google earth? Thanks
@@FlightSim2703 not flat unless its flat in real life. the 3d part comes from the usgs 1/3rd setting for the mesh
@@RavenSimulations awesome, it's cool in 3D like Google Earth if I do it right, so far I followed all posted videos on RUclips but unfortunately no changes to areal views whenever I fly over the Tiles I downloaded, looks like I'm doing something wrong even though I think I followed all steps, but question how comes I don't get Y Lear loaded it's a question for me , thanks
@@FlightSim2703 and they are in your custom scenery folder? inside xplane?
Wow that looks complicated. I'm sure this video is useful for people that understand what they are doing, but for those new to X Plane like me, way too complex
It is complex, but worth it in the end.