Most, if not all of these tips have been covered multiple times by many RUclipsrs, but you do a great job of explaining them in a way that is easy to understand 😊
Dogg man, you're right, we have been doing it wrong for the last thirty years. But the biggest tijp is: two hours and forty minutes is a lot of coffee.
@@FlynndoggWoodwork But since, you are the Dogg man, we stuck in there. If it weren't done on Sunday, we would have had a heck of a push up work out with all the "brand" name tools being used or mentioned. Keep it up Dogg man.
The Best Compilation I've seen... you took a year or more of watching various videos and crammed the contents into a couple of hours with clear explanation. Very Nice Job Bud... Thumbs Up !!
I really appreciate that Kevin! Thanks so much for watching. This was a long one and I cut out quite a few (because I don't use them that much). but I think there were some decent ones in there! Thanks so much for the kind words, really appreciate it!
Thanks Bryan! As a beginning woodworker, this compilation of tips, tricks and hacks is priceless! It also gave me another opportunity to strengthen my ADHD concentration. A double benefit!
Load of great info in this video. The jig for daidos size with router bits was my favourite one. It's taken me three days to get to the end of this mammoth tips video.
Great question. I really like this one. It's not perfect, but it is very easy to read. It is made by neoruler. Here is a link to it: amzn.to/3W2skVw Thanks so much for watching Brian
Oh nice! I did quite a bit of research for a lot of these tips! Thanks so much for your kind words and thanks for watching. Go Hoosiers! Can't believe they are 8-0!
Haha! Oh I'm very familiar with that movie. My roomate in college used to make me watch it all the time! He only had two things in life, and one of them was a thermos!
Oh man! I'm sorry Thomas. It was a long one that is for sure. Someone else on RUclips was asking me why I hadn't done any compilations yet, so I thought I'd give it a try. Kind of cheating I think! :)
Couldn't agree with you more about You Tube being a marketplace. I mean how many height gauges does one need? Some of my favorite videos are those that actually make tools rather than buying one. For example there are commercial kerf makers that cost a small fortune. There are tons of videos that show you how to make one with a couple of pieces of scape hard wood and a flat head screw. Works perfectly fine.
@@FlynndoggWoodwork No problem. You yourself just demonstrated exactly what I mean. With just one set of set up blocks, you were able to make a very accurate set up gauge with just a scrap piece of 4x4. Pretty ingenious in my book. Thanks!
@@FlynndoggWoodwork I often use the phrase: SQUIRREL! This happens when I get distracted and start doing something other than what I needed to do. Our neighborhood doesn't have squirrels so I don't know why I'm so easily distracted. SQUIRREL
Thanks so much Rayansandysteward! How 'bout them Hoosiers. Yippie! Crazy. It's almost like they want to take on the tradition of our formerly good basketball team! :)
I was going to laugh at you about not knowing to flip the sandpaper over on the spindle sander, but you're smart enough to have the money to buy a spindle sander, and I don't.
Haha! I could definitely do a compilation on those! :). Man, Sometimes I find one in my shop that I totally forgot about! :). Thanks so much for watching Rod!
Haha! I know, I'm still digging into a couple complilations myself from other channels! Thanks so much for watching and I'll be back to a couple of shorter videos this week! :)
@@FlynndoggWoodwork seriously I am going to watch it all I promise I’m you can probably see when people do this I don’t know but I always like your content and try and support!
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Most, if not all of these tips have been covered multiple times by many RUclipsrs, but you do a great job of explaining them in a way that is easy to understand 😊
I appreciate it Robert! I know so many youtubers churn out the same tips, I totally agree. Thanks for the compliment and thaks for watching!
Dogg man, you're right, we have been doing it wrong for the last thirty years. But the biggest tijp is: two hours and forty minutes is a lot of coffee.
I know right, it's a little long but I figured I'd join the compiliation crowd. I'm sure you've seen all these videos already! :)
@@FlynndoggWoodwork But since, you are the Dogg man, we stuck in there. If it weren't done on Sunday, we would have had a heck of a push up work out with all the "brand" name tools being used or mentioned. Keep it up Dogg man.
@@themeat5053 :) I knew you could do it! :)
The Best Compilation I've seen... you took a year or more of watching various videos and crammed the contents into a couple of hours with clear explanation. Very Nice Job Bud... Thumbs Up !!
I really appreciate that Kevin! Thanks so much for watching. This was a long one and I cut out quite a few (because I don't use them that much). but I think there were some decent ones in there! Thanks so much for the kind words, really appreciate it!
Thanks Bryan! As a beginning woodworker, this compilation of tips, tricks and hacks is priceless! It also gave me another opportunity to strengthen my ADHD concentration. A double benefit!
Haha! Thansk so much Pywacketfrog! I appreciate it. Best of luck to you and have a great week!
Thanks again Bryan! This video is going to be saved on a thumb drive as "Reference Material". Great job, sir!
Haha! That's awesome Jason! Thanks so much for watching, really appreciate it!
An incredibly thoughtful and useful video. Every new woodworker should watch this!
You are too kind gteam! Thanks so much for watching!
Brother... you are blessed with some drive! Thank you my man, you are appreciated!
Thanks so much Jake! Really appreciate it!
Thanks great video
Thanks so much JoeL! I appreciate it and thanks for watching!
It's good you put it all in one video great job keep up the good work
Really appreciate it Robert! Thanks so much for watching!
Load of great info in this video. The jig for daidos size with router bits was my favourite one. It's taken me three days to get to the end of this mammoth tips video.
Oh nice! Thank so much Projectrebuild! I appreciate it and thanks for watching! :)
Hey man, what type of digital caliper do you use… I liked the look in the plywood thickness section.
Great question. I really like this one. It's not perfect, but it is very easy to read. It is made by neoruler. Here is a link to it: amzn.to/3W2skVw
Thanks so much for watching Brian
Thanks Brian! Take care & stay safe.
You as well Doug! Have a great week and thanks for watching!
Hoosier Bryan, thanx for tips…now all i need to do is mark your videos because I really will use most of your hacks..thanx again..
Oh nice! I did quite a bit of research for a lot of these tips! Thanks so much for your kind words and thanks for watching. Go Hoosiers! Can't believe they are 8-0!
Great and helpful video. I learned a lot. I am just now setting up my two car garage woodworking shop.
That's great to hear snibushds! Best of luck to you. I hope your shop is coming together nicely!
I think that sandpaper 50% rule is my most valuable takeaway from this. Thanks!
Awesome, that is one of my favorite as well! Thanks so much Robet, really appreciate it!
My special purpose. (Steve Martin in the Jerk). Good stuff, Brian.
Haha! Oh I'm very familiar with that movie. My roomate in college used to make me watch it all the time! He only had two things in life, and one of them was a thermos!
@@FlynndoggWoodwork how do it know.
Dag nabit, Saturday morning video, are you kidding me? Hahahahahahaha now Im three hours late getting out to the shop....😂😂 Another good one!
Oh man! I'm sorry Thomas. It was a long one that is for sure. Someone else on RUclips was asking me why I hadn't done any compilations yet, so I thought I'd give it a try. Kind of cheating I think! :)
Bowing can also be limited by ensuring the clamp bars are in contact with the wood surface on top and bottom. Using minimal clamping force also helps.
Yes! Excellent point landryhc! Thanks so much for sharing and watching!
Couldn't agree with you more about You Tube being a marketplace. I mean how many height gauges does one need? Some of my favorite videos are those that actually make tools rather than buying one. For example there are commercial kerf makers that cost a small fortune. There are tons of videos that show you how to make one with a couple of pieces of scape hard wood and a flat head screw. Works perfectly fine.
I completely agree, sometimes the best tools are the ones you make yourself! Thanks so much for watching Gregg!
@@FlynndoggWoodwork No problem. You yourself just demonstrated exactly what I mean. With just one set of set up blocks, you were able to make a very accurate set up gauge with just a scrap piece of 4x4. Pretty ingenious in my book. Thanks!
@@gregghernandez2714 :). Thanks
Blade thickess is generally from the outside of one cutting tooth to the outside of the next. This takes into account the offset of the saw teeth.
Yes! You are correct. You need to incorporate the set of a saw blade. Fortunately miter saw has minimal amount
Thanks learned alot
My pleasure Jim! Thanks so much for watching!
Great hacks and tips but there are quite a few repetitive ones.
Keep up the good work.
Thanks so much Michael! Really appreciate it and thanks for watching!
Driving the screws into the miter gauge extension sounded like squirrels chatting. 😂
Haha! It very well could be. I've got 2 squirel traps set right out side my shop area in my barn right now! :)
@@FlynndoggWoodwork I often use the phrase: SQUIRREL! This happens when I get distracted and start doing something other than what I needed to do. Our neighborhood doesn't have squirrels so I don't know why I'm so easily distracted. SQUIRREL
@@kenerickson4923 too funny Ken! :)
Fold sandpaper smooth side in and cut through from the back. Straighter cut and is saves a bit of wear on the blade.
Great tip! Thanks so much Landryhc! Appreciate you watching!
You should be using clamps
/vise to hold small pieces for drilling.
Thanks so much!
Another excellent video. Thank you for sharing your tips and experiences with us.
Really appreciate it Obiwuncanoly! Thank so much for watching!
That tip about throwing away your small scraps may have ended up being an “unPOPLAR” opinion among wood hoarders 😄
Haha! I love it! You have my sort of sence of humor! :). THanks so much for watching Stellabelikiewicz!
All great tips, thanks for the video. Oh, and go Hoosiers beat Nebraska!
Thanks so much Rayansandysteward! How 'bout them Hoosiers. Yippie! Crazy. It's almost like they want to take on the tradition of our formerly good basketball team! :)
@@FlynndoggWoodwork I'm impressed with IU football this year, they will give my Buckeyes a good game.
@@RayandSandysWoodworking That should be a decent game. I thought it was a fluke until they creamed nebraska!
I was going to laugh at you about not knowing to flip the sandpaper over on the spindle sander, but you're smart enough to have the money to buy a spindle sander, and I don't.
haha! I'm not the sharpest tool in the shed sometimes! Thanks so much for watching guitarandgraves!
Better is the enemy of good enough.
:). Thanks so much for watching Navret! Really appreciate it!
I thought we were going down a worm hole with all the measuring device's you have. lol
Haha! I could definitely do a compilation on those! :). Man, Sometimes I find one in my shop that I totally forgot about! :). Thanks so much for watching Rod!
@@FlynndoggWoodwork you bet. I always enjoy watching.
Wow this’ll take a couple days to watch a bit long you think Brian ! 😅
Haha! I know, I'm still digging into a couple complilations myself from other channels! Thanks so much for watching and I'll be back to a couple of shorter videos this week! :)
@@FlynndoggWoodwork seriously I am going to watch it all I promise I’m you can probably see when people do this I don’t know but I always like your content and try and support!
@@michaelnorman5640 Your too kind Michael!
My wife unit heard compilation video and told me to stop watching porn
Haha! I bet I'd get a lot more views if it was! :). Thanks so much for watching LordHog!
did you ask her how she knew?
@@patrickbledsoe2176 :)