Hey Driver. Thanks for stopping by to watch today's video. What is the #1 tool of choice of yours that you would NEVER leave home without? Love to hear your thoughts.
I would add 1) a quality small flashlight. It's valuable for, e.g. reading things in the dark, or finding that leak before starting the graveyard shift because Murphy put the utility/street light on the other side of the engine bay. 2) a quality multi tool that you can put in its pouch on your belt-pliers, screwdriver, blade, etc. Not a magical tool, but very convenient and invaluable when no other tools are available. 3) a pen and pocket paper pad-taking quick notes, numbers, etc. Phones and other devices are nice, but. . . . are electronic and batteries, screens, and internet connections do fail, or erase stuff.
A push broom that you can take apart & stow easily. Take 5 minutes to clean your trailer & you can often skip needing a washout. Shippers often treat you better when you have a clean trailer every time.
A simple propane torch for those of you who visit the cold often is such a life saver(frozen parts&valves). That with a mallet is what I had to do about a year ago to get the pins to move on my air ride reefer trailer.
Also I would like to add its useful to have shovel and bag of salt in winter when you're stuck in the rest area or at delivery location I've helped out dozen of driver's over the years who were in trouble
Also keep a couple of cans of PB Blaster it works a lot better than WD-40 and it'll help with any thing that needs lubrication. I've used it to help free up my fifth wheel and for sliding my tandems
Love your channel, Dave. Many drivers won't get paid for fixing small issues in the equipment, & they won't ever see that money doesn't in tools, but if they're paid by mileage or loads delivered, these inexpensive tools & the 5 minute repairs will definitely pay for themselves many times over throughout the course of a career. Excellent tips, Dave. Thanks for sharing the knowledge you gained over a decades long trip.
Needle nose pliers and a pack of fuses for your truck. You don’t want to know how many times I’ve blown out a plug that had water in it and the pigtail and had to replace a fuse because the water popped it.
A good razor blade knife helps when you have air fittings. To repair some damaged air lines. 3 Magnetic rechargeable work lights help in very dark areas where there is no light and trying to back in a trailer. Put 2 magnetic lights on the trailer bumper. And 1 light on the driver side of the trailer on a wall or frame. A good bolt cutter for some of those special trailer seals. A good battery operated angle grinder. For when some scammer gives you a boot and wants to charge thousands of dollars to have it removed.
My favorite is a lazor thermometer. Checks wheel bearing, tire etc to see issues are present before failures and road side break downs. About $20 Harbor Freight.
Keep some hand sanitizer readily available in the harsh cold and snow. If your pads and shoes freeze up. The alcohol in it will break the cold and ice to free them up. Used that trick not too long ago. And currently have windshield wiper zip tied to a wiper arm because the plastic lock broke.
Always a wealth of great pointers, Dave!! Saving this one to make sure I grab a couple of items on this list that I don't have. Also funny that I am seeing this just moments after a mechanic handed me the rest of a packet of zip ties he'd opened to complete some work on my company trailer (this was wiring I would NEVER attempt to mess with, even if it was my own trailer tbh😅) ... thanks again!!😁
(Push to connect air fittings) Hey drivers I carry a variety pack of push to connect air fittings. Had a 3/8 line split on my lowboy this weekend and lucky for me I used a push to connect fitting.
Good choices for a top 5 list. But honestly it is just not quite enough. The I would add a couple SOLID screw drivers maybe even a screwdriver kit, mainly because there are a lot of screws that you may need to get to but those multi driver kits just cant get to. And a good flat head screw driver is a great pry tool for a lot of things. A good medium curve claw hammer is a great thing to have becaue you can use it for so many things and a mallet while also a must just can not do what a claw hammer can do. A good set of regular pliers and wire cutters is also a must. And I think you missed the most useful tool of all, some good tape, both duct tape and electrical tape.
ADD A DEWALT OR LEATHERMAN MULTI TOOL AS WELL AS A ENERGIZER LED FLASHLIGHT WITH ENERGIZER LITHIUM BATTERIES. TIRE PRESSURE GUAGE AND TIRE DEPTH GUAGE AS WELL. MOST STATES AND PROVINCES TIRES ARE ILLEGAL AT 4/32 OF AN INCH OR LESS. SOME STATES HAVE ENORMOUS FINES FOR RUNNING LOW TREAD TIRES $ 1,000-1,500 . TORQUE WRENCH AS WELL .
Don’t forget some of the most important things like duct, tape, electrical, tape, Flex Seal to stop those pesky leaks and condoms. You never know when you’re out in the middle of nowhere it might need it.
I'll add a pin puller and a 3 ft section of round bar in case you have to pound in one of those pins that are located right over the tire, when moving tandems.
To Smart trucking and one more thing it's not a tool but brass fitting for your airlines a handful of them in case you break off airline and then you will be able to fix it and get back on the road and road service
Duct Tape!! Everyone knows that ANYTHING can be fixed with Duct Tape! 🤣🤣 For you Volvo drivers, I would highly recommend a star key driver with multiple heads. So many bolts in a Volvo require this tool. A Phillips will NOT cut it. One thing I would also highly recommend is a tube of Amazing Goop silicone adhesive. It’s flexible and VERY strong. Both of the plastic hinges on my lower windows were repaired using that over TEN YEARS AGO and they are STILL good as new. I just added a new tube today to my arsenal because I ran out. Love that stuff! But yes, Dave, you are absolutely right about the 5 tools you recommended, they are all ABSOLUTELY essential. 👍
Vice grips where a must have for the stubborn tandem release levers that wouldn’t stay pulled out. I doubt there are many of those on the road anymore.
Stop at a Lowe’s or Home Depot and get a set of both open and box end metric snd standard hand wrenches from 3/4 inch down as NS that should cover just about every usual size snd on trucks nowadays. Especially 1/2 in. 9/16 in. and 7/16 in. and their metric sibling s being the most used along with what Dave said
Using a rubber mallet on an Wabash dry van trailer especially when weather is dry/hot and it needs little convincing on locking mechanism to close completely, goes long way..haha🔥👍
Never forget to carry Vienna sausages in the can. If you're in laredo on 35 and northbound driver is a jackass pop the top and throw the juice and sausages into his tandems. The drug dog at the boarder check will indicate on him and you'll have a great rest of your day laughing.
Zzipties restock (note to self.. ) add HD needlenose pliers, visegrip types exist, and a hands~Free HeadLamp, pricesless, get its batteries for peace of mind, don't lose them 😁 Edit: I have a hard rubber mallet, so I can bash on stuff anonymously 😆
The problem is most drivers these days don’t know a mallet from a screwdriver let alone what they’re used for and all you guys don’t drop that mallet on your flip flop it’s gonna hurt 😂
Can vouch for the zip ties being useful. Especially if you are having a issue with your tandem pins not coming out. Here's an example of what I'm taking about below. ruclips.net/video/GWpZiL2WUEE/видео.html You can use a zip tie to hold up the airbag rod so your tandems can pop out if you don't have the correct nut and bot to fix the issue on the spot. Also a tandem stopper is very useful device when it comes to saving time when you are sliding your tandems. I use the Magnastop myself. It can be found on Amazon but also at the Iowa 80 truck stop if you ever happen to stop there on your journeys.
Hey Driver. Thanks for stopping by to watch today's video. What is the #1 tool of choice of yours that you would NEVER leave home without? Love to hear your thoughts.
I would add 1) a quality small flashlight. It's valuable for, e.g. reading things in the dark, or finding that leak before starting the graveyard shift because Murphy put the utility/street light on the other side of the engine bay. 2) a quality multi tool that you can put in its pouch on your belt-pliers, screwdriver, blade, etc. Not a magical tool, but very convenient and invaluable when no other tools are available. 3) a pen and pocket paper pad-taking quick notes, numbers, etc. Phones and other devices are nice, but. . . . are electronic and batteries, screens, and internet connections do fail, or erase stuff.
A push broom that you can take apart & stow easily. Take 5 minutes to clean your trailer & you can often skip needing a washout. Shippers often treat you better when you have a clean trailer every time.
Mallets are also good for releasing frozen brakes.
And thumping intruders in the cab.
If you live in the states forget thumping them. Give them rapid onset lead poisoning works a lot better 1911 always faster than 911
😅😅👍👍
I’d add a putty knife. Good for scraping crap off the fifth wheel, dirt, ice or rust off etc. Super handy.
A simple propane torch for those of you who visit the cold often is such a life saver(frozen parts&valves). That with a mallet is what I had to do about a year ago to get the pins to move on my air ride reefer trailer.
Also I would like to add its useful to have shovel and bag of salt in winter when you're stuck in the rest area or at delivery location I've helped out dozen of driver's over the years who were in trouble
Zip ties are a great suggestion, but I would recommend longer ones, maybe 1 to 1-1/2 feet long. You can always snip off the excess.
Also keep a couple of cans of PB Blaster it works a lot better than WD-40 and it'll help with any thing that needs lubrication. I've used it to help free up my fifth wheel and for sliding my tandems
PB Blaster (or WD-40) is great for tandems that are sticky due to gunk build up.
Love your channel, Dave. Many drivers won't get paid for fixing small issues in the equipment, & they won't ever see that money doesn't in tools, but if they're paid by mileage or loads delivered, these inexpensive tools & the 5 minute repairs will definitely pay for themselves many times over throughout the course of a career. Excellent tips, Dave. Thanks for sharing the knowledge you gained over a decades long trip.
I always had my small tool box. Don't forget to have wire stripper and crimper. I even had some coated wire to fix broken light.
Fantastic tips! Crazy how less than $50 can really set you up for success on the road.
Needle nose pliers and a pack of fuses for your truck. You don’t want to know how many times I’ve blown out a plug that had water in it and the pigtail and had to replace a fuse because the water popped it.
A good razor blade knife helps when you have air fittings. To repair some damaged air lines. 3 Magnetic rechargeable work lights help in very dark areas where there is no light and trying to back in a trailer. Put 2 magnetic lights on the trailer bumper. And 1 light on the driver side of the trailer on a wall or frame. A good bolt cutter for some of those special trailer seals. A good battery operated angle grinder. For when some scammer gives you a boot and wants to charge thousands of dollars to have it removed.
My favorite is a lazor thermometer. Checks wheel bearing, tire etc to see issues are present before failures and road side break downs. About $20 Harbor Freight.
100% agreement . I would add , A Crimping Tool , assorted Crimps , Wire Roll and Electrical Tape to that list , speaking personally .
Keep some hand sanitizer readily available in the harsh cold and snow. If your pads and shoes freeze up. The alcohol in it will break the cold and ice to free them up. Used that trick not too long ago. And currently have windshield wiper zip tied to a wiper arm because the plastic lock broke.
Handheld propane torch can come handy as well, also need to have both black electrical tape and duct tape available
Hey I JUST got my CDL and this video and all your comments are so helpful, if anyone else can give me more ideas and tips I'd really appreciate it!!!
Vice grips lol, greatest invention ever when you blow a brake can
I'm not a flatbed driver but I always have a handful of bungee straps or a couple small ratchet straps handy
The vice grips are great if you can't get your lever for your tandems to stay out on an older trailer
Always a wealth of great pointers, Dave!! Saving this one to make sure I grab a couple of items on this list that I don't have. Also funny that I am seeing this just moments after a mechanic handed me the rest of a packet of zip ties he'd opened to complete some work on my company trailer (this was wiring I would NEVER attempt to mess with, even if it was my own trailer tbh😅) ... thanks again!!😁
Vise Grips are the best thing since sliced bread for a trucker!
Good video. 👍👍 🇨🇦
I ones used a zip tie to pinch off a air break line for a lift axle that was up. I was able to get back with out losing a lot of air
Fold down trench shovel, Binoculars, Bailing wire, circuit tester, RainX, Spare electrical wire, Claw hammer to thump tires and check slack adjusters....
Adjustable, I have to snug a battery terminal often for APU to start
I run containers. I can tell you that mini sledge and vise grips will slide any set of chassis tandems.
(Push to connect air fittings)
Hey drivers I carry a variety pack of push to connect air fittings. Had a 3/8 line split on my lowboy this weekend and lucky for me I used a push to connect fitting.
Thank you for everything you taught me and showed me , I will take you advice in this life and the other rest well my teacher
Good choices for a top 5 list. But honestly it is just not quite enough. The I would add a couple SOLID screw drivers maybe even a screwdriver kit, mainly because there are a lot of screws that you may need to get to but those multi driver kits just cant get to. And a good flat head screw driver is a great pry tool for a lot of things. A good medium curve claw hammer is a great thing to have becaue you can use it for so many things and a mallet while also a must just can not do what a claw hammer can do. A good set of regular pliers and wire cutters is also a must.
And I think you missed the most useful tool of all, some good tape, both duct tape and electrical tape.
ADD A DEWALT OR LEATHERMAN MULTI TOOL AS WELL AS A ENERGIZER LED FLASHLIGHT WITH ENERGIZER LITHIUM BATTERIES. TIRE PRESSURE GUAGE AND TIRE DEPTH GUAGE AS WELL. MOST STATES AND PROVINCES TIRES ARE ILLEGAL AT 4/32 OF AN INCH OR LESS. SOME STATES HAVE ENORMOUS FINES FOR RUNNING LOW TREAD TIRES $ 1,000-1,500 .
TORQUE WRENCH AS WELL .
Don’t forget some of the most important things like duct, tape, electrical, tape, Flex Seal to stop those pesky leaks and condoms. You never know when you’re out in the middle of nowhere it might need it.
I would add 4 2×4's for fire wood to grill while your waiting on the shipper to unload you. They smoked your day might as well smoke meat
The mallet, or "BFH" as I call it works well when your trailer brakes are froze up
I'll add a pin puller and a 3 ft section of round bar in case you have to pound in one of those pins that are located right over the tire, when moving tandems.
To Smart trucking and one more thing it's not a tool but brass fitting for your airlines a handful of them in case you break off airline and then you will be able to fix it and get back on the road and road service
Great suggestion for all drivers thank you I have told many drivers minimum tools for year's.
We use to keep socket sets, screwdrivers, zip ties, fuses, bulbs, tape, wrenches, a couple hammers, and one guy even kept an air ratchet on his truck.
The vice grips are also handy if you have a lift support strut that doesn't hold. You can clamp down on the strut once open to keep the hatch up.
Tarp straps are also an essential item. 21” 31” & 41” straps and a 2” ratchet strap can get you rolling again.
HOSE CLAMPS! for a $1 or so you can save yourself a lot of headache if you have a coolant clamp break or go missing from a hose popping off.
A good ratchet and socket set with extensions will be needed.
Thank you, again, Sir!!
String of some type for air line under trailer til you get a new spring that holds it up
Duct Tape!! Everyone knows that ANYTHING can be fixed with Duct Tape! 🤣🤣 For you Volvo drivers, I would highly recommend a star key driver with multiple heads. So many bolts in a Volvo require this tool. A Phillips will NOT cut it. One thing I would also highly recommend is a tube of Amazing Goop silicone adhesive. It’s flexible and VERY strong. Both of the plastic hinges on my lower windows were repaired using that over TEN YEARS AGO and they are STILL good as new. I just added a new tube today to my arsenal because I ran out. Love that stuff! But yes, Dave, you are absolutely right about the 5 tools you recommended, they are all ABSOLUTELY essential. 👍
Vice grips where a must have for the stubborn tandem release levers that wouldn’t stay pulled out. I doubt there are many of those on the road anymore.
The most effective tools all time king your Brian
Stop at a Lowe’s or Home Depot and get a set of both open and box end metric snd standard hand wrenches from 3/4 inch down as NS that should cover just about every usual size snd on trucks nowadays. Especially 1/2 in. 9/16 in. and 7/16 in. and their metric sibling s being the most used along with what Dave said
Great!
Thanks again Sir
Value your experience and knowledge, awesome advice
Thanks for sharing your hard earned knowledge.
Can’t change headlights anymore on the new cascadias. It’s all one unit and have to take it into the shop as a company driver.
Always great advice.
I keep all those PLUS channel lock pliers and a pry bar
Great list, thanks!
I used to have tools but the freightliner dealership in macon ga stole them when my truck was in the shop
Tape measure, and a good sharp knife should be included too
Using a rubber mallet on an Wabash dry van trailer especially when weather is dry/hot and it needs little convincing on locking mechanism to close completely, goes long way..haha🔥👍
I would add a multi-tool knife to the list. I use mine every day.
I need good vice grips. I also carry a portable heat gun to get those hazmat stickers off on cold cloudy days
Tool # 6, a case of Tylenol!
Very good advice!!! 👍😃
Dave
Good afternoon.
Great video. It is amazing. My expierence lead me exactly in the same goal.
You did it again
Thank You
Dave you forget that new drivers coming in dont know how to use these tools let alone the gear shift
Typical Canadian there Dave....making a vid in a snowstorm :)
That is not a snowstorm, it is just a dusting....
You can buy these tools at most swap meets or flea markets for just a couple bucks.
Dude... get out of the snow! I'm cold just looking at ya!
Add duct& electrical tape to the list. Love your channel..
Drivewyze is Totally Awesome
Thank you for the vid.
Yes sir
Electrical pliers and butt connectors
I was in Portland and my trailer brakes were frozen luckily there was a truck stop across the street I bought a hammer to free them up.
Yep, there's many a thing that would benefit with a little tap from a mallet. ;-)
Cheap drill set wont hurt to have either
I can fix anything with Duct tape!!
LOL
I carry a 600 ft lb torque wrench with me after I had a tire shop not pork my lug nuts and about destroyed my rims
Adjustable wrench=Swedish nut lathe.
Any opinion on Truck Driving Institute? Thanks
Gentle persuasion.. ha ! 🤣
My Friend
Thanks for sharing
BEST REGARDS
9 January 2022
Best to get 2
Never forget to carry Vienna sausages in the can. If you're in laredo on 35 and northbound driver is a jackass pop the top and throw the juice and sausages into his tandems. The drug dog at the boarder check will indicate on him and you'll have a great rest of your day laughing.
Zzipties restock (note to self.. ) add HD needlenose pliers, visegrip types exist, and a hands~Free HeadLamp, pricesless, get its batteries for peace of mind, don't lose them 😁
Edit: I have a hard rubber mallet, so I can bash on stuff anonymously 😆
I need vice grips
Great advice. RIP
The problem is most drivers these days don’t know a mallet from a screwdriver let alone what they’re used for and all you guys don’t drop that mallet on your flip flop it’s gonna hurt 😂
A roll of duct tape.
And Duck or electrical tape
Roll of duct tape too
RIP brother
You must have been in my truck
Sharp pocket knife
Hammer, bungie cord, a variety of flashlights, duct tape, rope, small step ladder and of course a cool tit - or tool kit, if you prefer.
👏👏👏👏👏🤠😎👍
Can vouch for the zip ties being useful. Especially if you are having a issue with your tandem pins not coming out.
Here's an example of what I'm taking about below.
ruclips.net/video/GWpZiL2WUEE/видео.html
You can use a zip tie to hold up the airbag rod so your tandems can pop out if you don't have the correct nut and bot to fix the issue on the spot.
Also a tandem stopper is very useful device when it comes to saving time when you are sliding your tandems. I use the Magnastop myself. It can be found on Amazon but also at the Iowa 80 truck stop if you ever happen to stop there on your journeys.
You forgot duck tapes
$30 @ H.F.
Or