Learn AutoCAD in a step-by-step way with more than 26 video lessons with quizzes and practice exercises for free here sourcecad.com/courses/autocad-essentials-course/
FREE sheet metal, gears, curves and others www.onlinecadtools.com/myindex_en.HTM www.onlinecadtools.com/english/html/sheet_metal/index.HTM www.onlinecadtools.com/english/html/index_gears.HTM www.onlinecadtools.com/english/html/index_curves.HTM www.onlinecadtools.com/english/html/index_st.HTM ruclips.net/video/7W1_jJ1XWzo/видео.html ruclips.net/video/T-irEOEON2w/видео.html Thanks! I need advertising and orders
i did this all by my selfe, as a starter...a friend of mine is teaching me how to make drawings, I wanted to suprice him with this one. Thanks for the good lesson!!
Great tutorial. I was wondering how did you know that the vertical line you drew to establish the second set of concentric circles was 65 units. It is not written in the diagram that appeared at the beginning of the tutorial. Thanks.
At the first glance, this detail is not dimensioned properly. One have to assume dimension 100 starts at the middle of top horizontal line. But assumptions are NOT allowed in the workshop, period. It should be 128 from the left side, thus you mark a vertical centre line. Instead of dim 65 it should be 193 from left to right, thus you determine the billet's length. Dims 12 and 48 are also assumed symmetrical. All in all, one should learn drafting (discipline) before learning AutoCAD (tool).Another thing, the tutor uses buttons on the ribbon to issue commands. This is indication the guy is a one-handed user and his productivity is 50% at best.
Hi Anatoli, I agree with what you said here but these are my concerns. A completely dimensioned drawings with proper GD&T symbols will confuse users to a great extent and in that case, for the half part of the video, I would have been forced to explain what those dimensions actually mean rather than explaining AutoCAD tools. Secondly, use of ribbon and panel is the obvious way of showing the tools/commands to users who are watching the screencast videos and if I start typing commands users will have to pause in between the videos several times to find out the command which I am using (I am saying this from experience). So to keep better user experience a simplified approach is used in this video and for drafting they can always refer to the respective manuals or ASME handbook.
This video is excellent even for a starter to learn, Please make a video with min explanation of how to give measurement then how to give values for our objects how to use all tools It would be very helpful if u consider this comment and help us with ur knowledge of autocad Thank you
Thank you for making this video, sir! But I also hope there's also a tutorial for GNACAD users like me, because it's really hard to do some of the activities given by our CAD professor, and most of my classmates are only using mobile phones.
Learn AutoCAD in a step-by-step way with more than 26 video lessons with quizzes and practice exercises for free here sourcecad.com/courses/autocad-essentials-course/
FREE sheet metal, gears, curves and others
www.onlinecadtools.com/myindex_en.HTM
www.onlinecadtools.com/english/html/sheet_metal/index.HTM
www.onlinecadtools.com/english/html/index_gears.HTM
www.onlinecadtools.com/english/html/index_curves.HTM
www.onlinecadtools.com/english/html/index_st.HTM
ruclips.net/video/7W1_jJ1XWzo/видео.html
ruclips.net/video/T-irEOEON2w/видео.html
Thanks!
I need advertising and orders
what's this drawing called ?
Please how can I draw it on sheet first please
i did this all by my selfe, as a starter...a friend of mine is teaching me how to make drawings, I wanted to suprice him with this one. Thanks for the good lesson!!
ruclips.net/video/ENhtIWImdbs/видео.html
Fantastically brilliant step by step teaching, making Auto cad most enjoyable to learn. THANK YOU .
Bro it’s boring
i find it so useful especially for people who don't know well how to use autocad ! thanks you so much
Welcome oumama
oumama sayouri Hi
God bless all the Indians making tutorials
Thanks, I knew nothing before watching this, now I know a lot.
Thank you sir very much. The best channel on the internet. Learnt so much with you god bless you !!
I am learning AutoCAD again. This video was helpful. Thanks.
Thanks im a student of mexico that want learn autocad and helped me so much whit this tutorial👩💻
Thank you so much for making this video. As a beginner im so happy that i managed to follow the steps and finished the drawing. Thank you!!
Very nice teaching method and voice clearity.
best AutoCad tutorial ever
Great tutorial. I was wondering how did you know that the vertical line you drew to establish the second set of concentric circles was 65 units. It is not written in the diagram that appeared at the beginning of the tutorial. Thanks.
That dimension is not mentioned in the drawing which is included in the video but it is 65 units.
@@sourcecad Include this missing dimensions in ur description of the video
Yep, this tripped me up too!
Did my first drawing. very helpfull
Appreciate :)
Great Javid,, congratulations!
At the first glance, this detail is not dimensioned properly. One have to assume dimension 100 starts at the middle of top horizontal line. But assumptions are NOT allowed in the workshop, period. It should be 128 from the left side, thus you mark a vertical centre line. Instead of dim 65 it should be 193 from left to right, thus you determine the billet's length. Dims 12 and 48 are also assumed symmetrical. All in all, one should learn drafting (discipline) before learning AutoCAD (tool).Another thing, the tutor uses buttons on the ribbon to issue commands. This is indication the guy is a one-handed user and his productivity is 50% at best.
Hi Anatoli, I agree with what you said here but these are my concerns.
A completely dimensioned drawings with proper GD&T symbols will confuse users to a great extent and in that case, for the half part of the video, I would have been forced to explain what those dimensions actually mean rather than explaining AutoCAD tools. Secondly, use of ribbon and panel is the obvious way of showing the tools/commands to users who are watching the screencast videos and if I start typing commands users will have to pause in between the videos several times to find out the command which I am using (I am saying this from experience).
So to keep better user experience a simplified approach is used in this video and for drafting they can always refer to the respective manuals or ASME handbook.
You are amazing . I was afraid of working on autocad . You made it so easy for me now .
Regards
Student
This video is excellent even for a starter to learn,
Please make a video with min explanation of how to give measurement then how to give values for our objects how to use all tools
It would be very helpful if u consider this comment and help us with ur knowledge of autocad
Thank you
Thank you sir... your way of teaching is very good
Your teaching techniques are very brilliant....
Thank you for step by step explanation
So Nice Nice Sir Fantastic Step by Step Mathed Please Or Videos upload karthi raho sir
Yes, it was very useful. I would need to exercise AutoCad for a job. Exact this kind of drawings.
this is a great video or mosthelpfull to me
in this video approxy. all comands you ell with us
thank you sir
Welcome kamal
really this is very helpul for new AutoCAD users a great thanks for this
Its really very good video, and u explained more properly to learn......Thank u
Excellent step-by-step! Thank you!
By your tutorial video any body can learn easily ... I was looking for detail drawings, Anyway I wanna appreciate you . Good luck
Thanks Susmita
How did you know the second set of circles started at 65 up from the centre of the first set of circles?
Yes pls reply to this question
@@vishnuravi1977 Dou you have one mistike in picture.
yes, I think he should check on that, or else it could be that the original drawer made some mistakes after leaving out such an important dimension.
how did you know the 65 unit line for drawing 2 circles side by side
Yeh same doubt for me
Thank you very much for help me to know the basic 2d, thanks
great teaching method.i like it, it is too much helpfull
Great simple exercise! Very helpful for a total beginner. Thanks.
No words for this video
Thank u very much sir for this most helpful video, covered all basic commands 👍👍👍
Very brief but a well precisely explained lesson. Thanks. Some more please.
Hi Sammy, here are more videos ruclips.net/p/PLcH1MIEuSvoH55AygdATks6ZX6dYO2kzA
Thank you so much it help me a lot
Very well Explained!!!Keep it up
Very Nice Nice teaching SIR GREAT SIR
Nice video 👍ur tutorial 👌💓
Great explanation, very helpful. Thanks
What an awesome tutorial. Thanks
Thank you so much and God bless you sir
Great tutorial thanks a lot sir
Thank you very much for you
This is more and more helpful for me
NYC.... video..... first video Mera your teaching...help....sir
Thank you Sir! Great video! Good practice.
Thank you sir for sharing your skills.
This video is very helpful for me. Thanks
Thank you, so much! It was also my first drawing and it helped me so much and I learned so many helpful things! Wish you all the best!
ruclips.net/video/ENhtIWImdbs/видео.html
this video helped me a lot. thanks
THANKS FOR TUTORIAL
Very good 😍😍😍😍🤗😍😍😍😍
Vgd teaching your....sir....Tq
Nice vedio It's useful us
short and clear, thanks mate
thanks for your labour, its really helpful to me and your English is so clear :)
Sir i really appreciate your work. Also Plz show 2D diagrams while explaining. Thank you
Sir, u explained very well..very helpful video to understand the basic commands in Autocad
very helpfull you have a pleasent voice. Great job!
its very useful to me... tq
Nice Explaining 🤟
very useful to me as a beginner.
really amazing video and i learn lot of ideas
Karthick Suresh. Super
Wow you explain so clearly.
It will be excellent if you tell the use of tool.
Nice work. Thanks!
thanks was very usefull....
Thanks sir keep it up! we need more
thank you sir such commands are very useful...
Thank you so much. Very effective
fantastic video
Great tutorial. Thank you!
How have you calculated that the distance between the upper smaller sets of circle and the centre of larger sets of circle is 65 units?
Great job!
Thank you.
Extremely helpful thank you
Great Video !!
very helpful to understand easily.... Thank you....
Thank you so much ❤️
congratulations for this video presentation
Thank you 😊
superb and helpful video.... thanks for this video
Thank you very much.I am very grateful.
Thank you so much
Nice one sir
Good teaching
Thnxx sir..its really helpful
it's amazing !
thank you !!
Thank you so much man
THANKS a lot sir
Can I know what was the component that was designed here??
great job dude
Thanks Rahul
Thanks a lot this is useful and remember more steps 👍🏻👍🏻👍🏻
Welldone sir
This is very easy I wish I could have done this for cxc
sir you explain very well specially your communication.,🐩💎💎💎💎
thanks for nice tutorials.
Well done
can u plz elaborate about the tangential part from 3:50
video it's helpful. i hope you continue that make many videos
pls how come the distance from the big circle to the small circle of radius 9 is 65
Thank you for making this video, sir!
But I also hope there's also a tutorial for GNACAD users like me, because it's really hard to do some of the activities given by our CAD professor, and most of my classmates are only using mobile phones.
Good tutorial video sir!
Let me ask which version are using?I would like to know.