Mads - YOU are a Rockstar ! Thanks to both of you for making every sunday evening enjoyable , fair winds and following sea and lots of love from Denmark
I am three weeks into binge watching your channel and I’m thoroughly impressed with your process and attitude, your boat is certainly coming along to being a beautiful yacht. It’s a shame you cannot have a shed full time. Keep up the great work as I’m sure you will. All the best.
Super work coming up with a work-around for the solar arch frame, Mads! And thanks for the tour of the MakerSpace. Every community should have something like that!
Oh no, he's killed the missus already!! Glad the storms didn't affect you too much, I'm 700 miles north and we got a little snow and not much rain, take care guys.
I would put brackets on the stainless frame to hold the scuba tanks. Just a couple of loops and something to ratchet strap the tanks down so they won't shift around.
We just got an offer accepted on a Malo 36 ♥ Strongly suspecting we'll take it to Gosport to work on it with a membership at MAKE. This video was super useful!
I have workshop envy. You are so lucky to have that Maker workshop so close to you. We don't have anything like that in our area :( Hope you weathered the storms OK. Hopefully we won't have anything like that in the Caribbean this coming summer... please? Take care & say Hi to Ava
I find it amazing everywhere you go you find a workshop and good people to help you. Really happy the DIY is still a thing. I really like the two of you so I will still watch even when you get Athena to perfection and the DIY becomes repairs that every boat must perform. Keep living the dream! David, Mary, and family.
Very nicely done Mads and great that you found the Maker space - did they reach out to you? They are to be congratulated for getting this wonderful space together and equipping it so well, that is a massive achievement, especially in the South of the U.K. where land is uber expensive and rental costs high. It is has been disappointing to read some of the uniformed, arrogant and derogatory comments made by a few here in the comments section. Other than that - spiffy video and progress, progress, progress - good luck with mounting the panels.😀👍⛵️
Very cool makerspace. I googled for one near me, & whaddyaknow, there is one! I bet it took you a lot less time to make the arch adapter in the workshop than you wasted phoning around for months to try to get someone out to the boat to do it & it will be such a relief to be able to move that to-do post-it to the done pile.👍🏻
Ran into the same problem with on site welders when needing new brackets for my navigation lights on the bow and stern rails. First guy strung me along for a while and then no showed. The last guy charged me an arm and a leg, but I was ready to move on, and am happy to have it done. I am excited to see the performance of your solar array. Cheers from Seattle, WA, US
We stop sleeping on our boat at 30 knots, can’t imagine what 100+ knots would be like. Stress factor=pucker. Glad you both safe and that maker’s space is amazing!
Nice job Mads and the typically British understatement must be rubbing off. Eunice was the biggest storm to hit the south of England in 30 years and storm Franklin is due anytime. Stay safe and fingers crossed that the High-Pressure forecast for Thursday gives you a solar panel weather window.
Glad to hear that you're weathering the current spate of storms safely, it really is foul out there at the moment. I'm currently 75% through rebuilding my house and I really do get inspiration to keep going by your fantastic energy and attention to detail. The description of how long it took to polish the arch had me laughing out loud! I will attack some of my least favourite jobs tomorrow with renewed vigour!!
That Maker Space is awesome. I wish there was one where I live. We have been living in the tropics with 1300w of solar. You're going to have tons of power, especially when you get further south.
You are a DIY Rock Star ! I have followed you for a year and yes you are ! All you do can be applied to life not just a yacht, Yacht being the best ! Looking forward to your sailing tubes!
Another great episode! I got inspired and checked out if there was a local maker/hackspaces to me and found "Richmondmakerlabs uk" in South West London (previous comment was removed because of the link). They have a very similar set up so previous ideas I had but shelved because of no access to the tools can be revisited! The weather isnt going to let up this week as theres another storm heading our way thats currently just below Greenland. The jetstream has had some disturbance so has created a lot of low pressure eddys.
For those pesky little stainless areas you can’t polish, you can passivated them with oxalic acid. More commonly found in Barkeepers Friend. I use it on my brewing equipment from time to time.
Mads if you have a Dremel with the flexible wand the wand will fit inside the tubing to grind that weld. Having the flexible wand makes using the Dremel so much easier especially if you are working in tight or enclosed areas. I have a small shop but I'd love to have a shop like you are using available for my projects. That's an amazing public area with a lot of very expensive equipment. The next time you need to weld a nut onto something try using a bolt to hold it centered in the hole without moving. See ya next week.
You could put springs or rubber disks or something similar between the heads of the bolts and the nuts on the extension piece. That should prevent them from ever coming loose.
Very cool shop and I'm not surprised you found a maker spot. Ava is lucky your visa is up otherwise she might never see you again. Lol stay happy and safe
Thank you Mads for this week's video. Very nice work on the adapters for the solar arch. I have been looking for a maker space here, but no luck. Glad you found such a nice facility for your projects. Take care, best to you and Ava.
Jesus, I just got to the part with the sunny sky, and Mads cheerfully talking about "storm Eunice??" coming the next day, and thinking about the video on the BBC these past days... Now Sailing Life has turned into an edge-of-your-seat thriller, for the next 10 minutes. in this thriller, Mads is the Tom Cruise character, so we know he won't die (also the video got posted, without a sorrowful widow saying "Mads was such a great guy, and this boat is his testament". Mads, you have no reason to be flattered or offended by being Tom Cruise, I'm not the casting director.
Mads in the universal language means “ Man that can make almost anything “( not meant to offend anyone by using Man). But come on how many women would want to be called Mads lol. Glad to see ya’ll are doing well during the storms, hoping all stays well with no damage. That Makers Shop was a great idea from someone, wish we had something like that here where I live. Don’t feel the least bit bad about your welding I still only know how to stick weld and it’s been at least 40 or 45 years since I’ve done that. Best wishes to you and Ava. Stay safe and greetings from West Texas.
Congratulations Mads to you both, I see you have changed the title intro to 'my wife'. Wind and rain here in blighty who would have thought it. Up North this is weather we would consider putting a jacket on for!
I never heard of Maker Spaces before this. I can see it as a great new use for some of the “brick and mortar” retail buildings that internet commerce has killed.
I'm legitimately surprised that you are the first sailing youtuber that I've seen use SunPower panels. I mean, sure, they come at a pretty spicy premium, but in a limited-space situation like on a boat, they are hands down the best option for getting as many watts as possible. Looking forward to seeing how the install goes, for sure!
Once some things are more permanently stowed, I expect Mads will buy a TIG ! A small/medium vice and some kind of portable bench and he will be good to continue metal fabrication. For those of you not into metal work, aluminum square tubing is extruded and does not have that ridge inside.
Madds Try CitraSurf on all your stainless surfaces...l have constructed large industrial facilities this product offers long term protection by increasing the chromium oxide layer!
Too late for this project, but you should insert a bolt into the nut before welding. It will act as both a 'heat sink' and a thread protector. Also, I can't tell from the video, but it's good practice to keep the gas flowing for a few seconds after you've stopped welding, on both the weld and the end of any filler rod. Prevents contamination of the weld... I'm guessing those red jugs around the mast are spare fuel, why not ask your in-house expert seamstress Ava to sew up a white boot to keep the sun and rain off them? 😎
Ava's transition from "girlfriend" to "fiancee" to "wife" has not been lost on us. Congratulations!
😁
It was announced previously, you’ll have to go back and find the episode.
I was traveling for a bit and things changed? I feel left out.
Maker spaces are huge assets to communities. Glad you found a well-equipped spot in Gosport.
Great to see you at the Makerspace and glad we could help with your projects.
Mads - YOU are a Rockstar ! Thanks to both of you for making every sunday evening enjoyable , fair winds and following sea and lots of love from Denmark
Skovfogeden, well said. Best wishes to everyone from USA.
I am three weeks into binge watching your channel and I’m thoroughly impressed with your process and attitude, your boat is certainly coming along to being a beautiful yacht.
It’s a shame you cannot have a shed full time. Keep up the great work as I’m sure you will.
All the best.
Another wonderful installment!
You need to give every other yachtie youtuber lessons on how to do audio in the wind. Your audio was spectacular!
That makerspace its so incredible, definitely you can do whatever you want in there, it would be so useful on most of your past projects
I love this channel, always to the point, with a minimum of blah blah blah. Good luck filling down the inside of the tubing btw.
Wow! That maker space looks amazing! I’d love to have that in my town! That would really boost people into making stuff themself 😍
Super work coming up with a work-around for the solar arch frame, Mads! And thanks for the tour of the MakerSpace. Every community should have something like that!
The sun burn on the hands after those welds 🥲
Magnificent workshops! Thnx for the tour 👍🏽
new intro sentence .... ".. my wife Eva.." pretty cool dude!
Oh no, he's killed the missus already!! Glad the storms didn't affect you too much, I'm 700 miles north and we got a little snow and not much rain, take care guys.
Nice arch solution Mads.
🖖😎👍
I would put brackets on the stainless frame to hold the scuba tanks. Just a couple of loops and something to ratchet strap the tanks down so they won't shift around.
We just got an offer accepted on a Malo 36 ♥ Strongly suspecting we'll take it to Gosport to work on it with a membership at MAKE. This video was super useful!
I have workshop envy. You are so lucky to have that Maker workshop so close to you. We don't have anything like that in our area :(
Hope you weathered the storms OK. Hopefully we won't have anything like that in the Caribbean this coming summer... please?
Take care & say Hi to Ava
I find it amazing everywhere you go you find a workshop and good people to help you. Really happy the DIY is still a thing. I really like the two of you so I will still watch even when you get Athena to perfection and the DIY becomes repairs that every boat must perform. Keep living the dream! David, Mary, and family.
That maker space was NICE!
Marie Antoinette is an interesting boat name.
Updated intro is rocking! ;)
As always Madds a great video love the makers place
Thank you. All the best from Wisconsin USA
A very exciting blustery video! Thanks Mads!
Very nicely done Mads and great that you found the Maker space - did they reach out to you? They are to be congratulated for getting this wonderful space together and equipping it so well, that is a massive achievement, especially in the South of the U.K. where land is uber expensive and rental costs high. It is has been disappointing to read some of the uniformed, arrogant and derogatory comments made by a few here in the comments section.
Other than that - spiffy video and progress, progress, progress - good luck with mounting the panels.😀👍⛵️
Very cool makerspace. I googled for one near me, & whaddyaknow, there is one! I bet it took you a lot less time to make the arch adapter in the workshop than you wasted phoning around for months to try to get someone out to the boat to do it & it will be such a relief to be able to move that to-do post-it to the done pile.👍🏻
You're a funny guy... and very impressive!
Ran into the same problem with on site welders when needing new brackets for my navigation lights on the bow and stern rails. First guy strung me along for a while and then no showed. The last guy charged me an arm and a leg, but I was ready to move on, and am happy to have it done. I am excited to see the performance of your solar array. Cheers from Seattle, WA, US
We stop sleeping on our boat at 30 knots, can’t imagine what 100+ knots would be like. Stress factor=pucker. Glad you both safe and that maker’s space is amazing!
You've got Mad(s) Skillz in the shop. Awesome tour
That is an awesome self help shop you got there and I'm pretty sure you are going to make good use of it.
Wow. That Make Gosport is freekin’ awesome! I wish my marina had one of those! 🤘🏻😁
Mads, you were like a kid in a candy store in the makerspace, that looks like it had all the things you needed. Glad to hear you survived the storm.
Pretty cool maker space. I wish I had a similar option near me.
The space/shop seemed kinda messy for my taste…
Would love to see you visiting more maker spaces on your travels
Great work as always!
Nice solo video.
Missed the “boss” this week.
Nice job Mads and the typically British understatement must be rubbing off. Eunice was the biggest storm to hit the south of England in 30 years and storm Franklin is due anytime. Stay safe and fingers crossed that the High-Pressure forecast for Thursday gives you a solar panel weather window.
Come on now.. Mads has been the master of understatement for years before even reaching the UK.. remember his "slightly extensive refit" line?
Yes delivery companies do things when it is convenient for them and not you. True story.
Glad to hear that you're weathering the current spate of storms safely, it really is foul out there at the moment. I'm currently 75% through rebuilding my house and I really do get inspiration to keep going by your fantastic energy and attention to detail. The description of how long it took to polish the arch had me laughing out loud! I will attack some of my least favourite jobs tomorrow with renewed vigour!!
Always a pleasure
That Maker Space is awesome. I wish there was one where I live.
We have been living in the tropics with 1300w of solar. You're going to have tons of power, especially when you get further south.
Great episode mads
Electric tools, "both battery AND cordless"... Cool! :D
That’s one cool workshop! 👌
many thanks for explaining 4x400=1600!
You are a DIY Rock Star ! I have followed you for a year and yes you are ! All you do can be applied to life not just a yacht, Yacht being the best ! Looking forward to your sailing tubes!
I love the fact that exists.. great job Madds .. stay safe an sound!! ✌🏼💗😊❣️
I thought of you when I saw the reports of the winds in the Solent. Glad you are OK.
Another great episode!
I got inspired and checked out if there was a local maker/hackspaces to me and found "Richmondmakerlabs uk" in South West London (previous comment was removed because of the link). They have a very similar set up so previous ideas I had but shelved because of no access to the tools can be revisited!
The weather isnt going to let up this week as theres another storm heading our way thats currently just below Greenland. The jetstream has had some disturbance so has created a lot of low pressure eddys.
For those pesky little stainless areas you can’t polish, you can passivated them with oxalic acid. More commonly found in Barkeepers Friend. I use it on my brewing equipment from time to time.
i like that co-op shop thats spiffy😄
That shop is Awsome !! 🤘🤘🍻
Glad to see that you are enjoying your stay there. That workshop looks amazing!
Your lapel microphone is amazing. All that wind and your voice was still clear and almost undisturbed.
What a amazing place!
Mads if you have a Dremel with the flexible wand the wand will fit inside the tubing to grind that weld. Having the flexible wand makes using the Dremel so much easier especially if you are working in tight or enclosed areas. I have a small shop but I'd love to have a shop like you are using available for my projects. That's an amazing public area with a lot of very expensive equipment.
The next time you need to weld a nut onto something try using a bolt to hold it centered in the hole without moving.
See ya next week.
Another great video Mads and Ava.
You could put springs or rubber disks or something similar between the heads of the bolts and the nuts on the extension piece. That should prevent them from ever coming loose.
And yes congratulations to both of you!🤓👍
Very cool shop and I'm not surprised you found a maker spot. Ava is lucky your visa is up otherwise she might never see you again. Lol stay happy and safe
Great job Mads!
Thank you Mads for this week's video. Very nice work on the adapters for the solar arch. I have been looking for a maker space here, but no luck. Glad you found such a nice facility for your projects. Take care, best to you and Ava.
Jesus, I just got to the part with the sunny sky, and Mads cheerfully talking about "storm Eunice??" coming the next day, and thinking about the video on the BBC these past days... Now Sailing Life has turned into an edge-of-your-seat thriller, for the next 10 minutes.
in this thriller, Mads is the Tom Cruise character, so we know he won't die (also the video got posted, without a sorrowful widow saying "Mads was such a great guy, and this boat is his testament".
Mads, you have no reason to be flattered or offended by being Tom Cruise, I'm not the casting director.
Hope you both came through "Eunice" unscathed? That workshop is awesome, wish I had one close by. Cheers
Love your channel Mads! The solar setup is going to be amazing. Keep up the great work!
Mads in the universal language means “ Man that can make almost anything “( not meant to offend anyone by using Man). But come on how many women would want to be called Mads lol. Glad to see ya’ll are doing well during the storms, hoping all stays well with no damage. That Makers Shop was a great idea from someone, wish we had something like that here where I live. Don’t feel the least bit bad about your welding I still only know how to stick weld and it’s been at least 40 or 45 years since I’ve done that. Best wishes to you and Ava. Stay safe and greetings from West Texas.
Congratulations Mads to you both, I see you have changed the title intro to 'my wife'. Wind and rain here in blighty who would have thought it. Up North this is weather we would consider putting a jacket on for!
Wish I could be there to help you, or maybe doing my own DIY Sailing adventure! You're doing an amazing pre-fit out before a world tour!
Congratulations you two.
Congrats, you two!
Great video, missed Ava.
Stay healthy and we'll see you next week.
it's the sort of midnight revelation id have too.. if I just wrap myself up in a blanket with a grinder.
That space makes me want to move to Gosport. But I live many thousands of miles away. :(
I think I might check out these maker spaces
Great job as always 👍
My Boss, in typical UK understatement simply said that his table blew over but the Pubs are open!
Brilliant maker space, that was a great find. What happened to Ava this week, did she blow away in the storm? 😊 Andy UK
I never heard of Maker Spaces before this. I can see it as a great new use for some of the “brick and mortar” retail buildings that internet commerce has killed.
Great job
Looking good!
Thanks Mads.
Great workshop!
Strong work!
Very Nice Good Luck on Mounting the pannels
You have, and are doing an amazing job on Athena.
Nice workshop....I"ve been doing some jobs on my boat and could really use a place like that.
Awesome job
Excellent.
So gald there are two ways upstairs in the maker space. I was worried about that!
I'm legitimately surprised that you are the first sailing youtuber that I've seen use SunPower panels. I mean, sure, they come at a pretty spicy premium, but in a limited-space situation like on a boat, they are hands down the best option for getting as many watts as possible. Looking forward to seeing how the install goes, for sure!
Both battery AND cordless tools?! wow!!!!!
Gotta see if I can find a communal workshop in Copenhagen!
Once some things are more permanently stowed, I expect Mads will buy a TIG ! A small/medium vice and some kind of portable bench and he will be good to continue metal fabrication.
For those of you not into metal work, aluminum square tubing is extruded and does not have that ridge inside.
you did a good job!
Coffee maker! Say no more. I'm on my way to help
Madds
Try CitraSurf on all your stainless surfaces...l have constructed large industrial facilities this product offers long term protection by increasing the chromium oxide layer!
It is a bit sad how much I look forward to your videos coming out.
Too late for this project, but you should insert a bolt into the nut before welding. It will act as both a 'heat sink' and a thread protector. Also, I can't tell from the video, but it's good practice to keep the gas flowing for a few seconds after you've stopped welding, on both the weld and the end of any filler rod. Prevents contamination of the weld... I'm guessing those red jugs around the mast are spare fuel, why not ask your in-house expert seamstress Ava to sew up a white boot to keep the sun and rain off them? 😎