Sick of fancy YouTube workshops? You'll like this video...

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024

Комментарии • 441

  • @StumpyNubs
    @StumpyNubs  11 месяцев назад +14

    ▼ *IMPORTANT DETAILS ABOUT VIDEO:* ▼
    - Plans for this project: stumpynubs.com/product/hall-tree-storage-bench/
    (The original long-form videos are on the project plans page.)

    ★THIS VIDEO WAS MADE POSSIBLE BY★
    - Bora Clamps: amzn.to/3eR1KYZ
    - Bora Saw Edge Guides: amzn.to/2XByXhw
    (The NGX system is my favorite, the WTX version is 2nd best)
    *My Table Saw and Bandsaw are AWSOME! Check them out at Harvey Woodworking Machinery:* www.harveywoodworking.com/
    *My hand tool collection includes premium tools from Bridge City Tool Works:* bridgecitytools.com/
    *Please help support us by using the link above for a quick look around!*
    (If you use one of these affiliate links, we may receive a small commission)
    *Some other useful links:*
    -Check out our project plans: stumpynubs.com/product-category/plans/
    -Instagram: instagram.com/stumpynubs/
    -Twitter: twitter.com/StumpyNubs
    ★SOME OF MY FAVORITE INEXPENSIVE TOOLS★
    - #ISOtunes Hearing Protection (Save 10%): bit.ly/3BHYdH7
    -123 Blocks: lddy.no/vpij
    -Mechanical Pencils: amzn.to/2PA7bwK
    -Lumber pencil: amzn.to/2QtwZjv
    -Pocket Measuring Tape: amzn.to/2kNTlI9
    -Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK
    -Self-Centering Bits: amzn.to/2xs71UW
    -Steel Ruler: lddy.no/10mv7
    -Center-Finding Ruler: lddy.no/10nak
    -Bit & Blade Cleaner: amzn.to/2TfvEOI
    -Narex Chisels: lddy.no/sqm3
    -Mini Pull Saw: amzn.to/2UEHBz6
    -Shinwa Rulers: lddy.no/zl13
    -BOW Featherboards: amzn.to/430ldhv

    (If you use one of the affiliate links above, we may receive a small commission)

    • @onarandomnote25
      @onarandomnote25 11 месяцев назад +2

      Mate, can I just say, I really like your videos and the fact you've remained true this entire time throughout RUclips evolution. Not trying to push a parasocial relationship or anything, but I have been watching your videos for years and they're just as good quality now than they were 6 years ago. Keep up the great work and I hope you have plenty of success moving forward.

  • @LtNomad304
    @LtNomad304 11 месяцев назад +479

    22 years ago I made a computer desk with just a circular saw, cheap palm sander and hammer. It turned out pretty good and I still use that desk to this day. You dont always need expensive stuff to do good work.

    • @christopherlatham4254
      @christopherlatham4254 11 месяцев назад +19

      In 1988 I made a computer desk using just a jig saw, electric sander and a hammer. I used that desk for about 30 years with some modifications over the years to adapt to changes in computer styles. As built it had a keyboard drawer and drawer for a dot matrix printer.

    • @pakde8002
      @pakde8002 11 месяцев назад +27

      When I moved to Indonesia 13 years ago I knew very little about the exotic woods common here or even where to find quality woodworking tools as online shopping wasn't a thing and there are no big box stores. I can't even remember where I got the wood from but I did manage to buy a handsaw and a few other basic hand tools because I wanted to make a little table for my new wife. It actually turned out pretty good and I had a good laugh when I heard my niece now in college is using it. Living here has taught me that you don't need a fancy shop or tools as the Indonesian craftsmen (and yes it's PC because they're literally all men) build amazing furniture and even houses and boats with very basic and primitive tools. They use their brains and creativity instead of a credit card.

    • @DuffyHomoHabilis
      @DuffyHomoHabilis 11 месяцев назад +6

      There's a bookshelf with glass doors in my family that my Grandpa (born in 1910) built out of orange crates and other scrap wood, with few, if any, power tools.
      Looking at the piece, you'd never know it was homemade.

    • @WilliamBlake7227
      @WilliamBlake7227 11 месяцев назад

      ​@@christopherlatham42541

    • @tjesse
      @tjesse 11 месяцев назад +13

      23 years ago I made a canoe with hack saw, nail file, and chewing gum.

  • @dutchbeef8920
    @dutchbeef8920 8 месяцев назад +342

    I just love all the “beginner” videos where first on the list is running all the wood through a workshop planer, superb 🎉😂

    • @TwoDogsFighting
      @TwoDogsFighting 8 месяцев назад +42

      Here's a really easy to make thing, you just need ALL the tools.

    • @CptJistuce
      @CptJistuce 8 месяцев назад +54

      Step 1: buy the entire tool store.
      Step 2: make the thing

    • @AlbertaGeek
      @AlbertaGeek 8 месяцев назад +34

      Then just draw the rest of the owl.

    • @thor3279
      @thor3279 7 месяцев назад +12

      only after you run it through your jointer, of course :|

    • @mkeyx82
      @mkeyx82 6 месяцев назад +9

      I guess you didn't notice the fella talking for a few minutes about the importance of buying flat wood. Go to another store if needed, he said.

  • @chrisc475
    @chrisc475 6 месяцев назад +10

    The salt trick when gluing edges is genius, thanks!

  • @HydraMods
    @HydraMods 11 месяцев назад +172

    I appreciate the fact that you'll still build projects. So many "woodworkers" on youtube simply talk about tools and tell you what you "NEED TO BUY". I've entirely stopped watching some certain channels where the creator hasn't actually built anything in ages. Keep up the good work!

    • @CLove511
      @CLove511 11 месяцев назад +22

      Hell, even joinery.
      "LOOK AT THIS AMAZING JOINT ON THESE TWO 12" SCRAPS!"
      Okay, but are you really going to repeat that entire process 15 more times?

    • @breanneblain9210
      @breanneblain9210 11 месяцев назад +9

      Sadly, two RUclipsrs I used to enjoy watching have done exactly this and I don’t even bother watching their content - I just scroll right on by 😪

    • @HydraMods
      @HydraMods 11 месяцев назад +9

      @@breanneblain9210 Is at least one of these channels from Arkansas by chance? 🤭

    • @codacreator6162
      @codacreator6162 11 месяцев назад +5

      Me, too. My “shop” hasn’t grown significantly in two years, but I’m still very interested in project ideas I can make. All I get is ads for tools I don’t have and that I can’t afford.

    • @silverbackag9790
      @silverbackag9790 11 месяцев назад +19

      I’ll call him out. 731 Woodworks. Nothing but an affiliate links pusher. I am not against affiliate links or sponsored content. But shit, add some value along the way. He doesn’t have much roots to go back to. He’s always been a links pusher with an occasional DIY project (for which he likely sells plans for). It’s not like he was a master cabinet maker either.

  • @lumpyren
    @lumpyren 11 месяцев назад +107

    Thank you! I am so tired of the "Lets use $400,000 of festool tools to do this job." youtube channels

    • @eustacemcgoodboy9702
      @eustacemcgoodboy9702 7 месяцев назад

      There's money in "reality TV", and youtube is no exception. Much of what you see on here is staged and produced by well funded professionals. In a word, fake.

    • @Motocicleiros
      @Motocicleiros 3 месяца назад +1

      I fully agree. And I still will watch those videos for entertainment purposes! Aren't they fancy and amazing?

  • @oldcodger4672
    @oldcodger4672 11 месяцев назад +54

    As penniless newly weds, 55 years ago, my new bride designed our lounge suite.
    Actually it was a knockoff, seen in the upmarket store of David Jones Sydney store. She would surreptitiously visit the store with a tape measure, so came up with a set of working drawings.
    I had a tenon saw, a mitre box, and a brace and bit. The arms and legs for the chairs and lounge were made of one inch round dowel, so joining them was a challenge. Fortunately I found a standard Meranti dowel to use.
    I finished them off with many coats of high gloss enamel. My wife made the cushions. Side by side with the original, it was pretty good. My wife cherished my efforts for many years.
    I made numerous items of furniture for her, with the most basic of tools.

  • @revoxjazz8317
    @revoxjazz8317 6 месяцев назад +2

    Just my opinion about your work and the coherent and very enlightening way in which you display it on your channel:
    Fantastic! I'm not a carpenter (I work in electronics) but the way you explain the subject is inspiring to do more, better and preferably without ruining material (or your hands).
    For me, I think your videos could be longer, due to the fact that every sentence I hear from you is another small detail of wisdom that can and should be stored in my little universe.
    Don't complain about the length of these videos. Learn from this man.
    Macedo Pinto
    Portugal

  • @williamallison999
    @williamallison999 11 месяцев назад +19

    Thanks for showing people what can be done with tools they may have in their shop or garage. Too many channels are only showing the newer fancy tools, nothing against the newer products, however this video shows someone can get started without spending a lot of money.

  • @dandeflavis7004
    @dandeflavis7004 11 месяцев назад +15

    Expensive tools just make the job faster and easier. I'm a professional carpenter but I learned how to build with basic hand tools long before it became a career.

    • @minhducnguyen9276
      @minhducnguyen9276 7 месяцев назад +2

      Besides, if you are not planning on becoming a career carpenter, some people just want to build a simple painting frame. Getting a workshop planner is like getting a sledge hammer to crack a walnut.

    • @paulwindisch1423
      @paulwindisch1423 6 месяцев назад +3

      Yes, but if it’s a black walnut, you will need the sledgehammer. Lol

  • @RichyN25
    @RichyN25 11 месяцев назад +25

    as a beginner woodworker who is working out of his garage and slowly turning it into a woodworking shop myself, your videos are alwasys super helpful and inspiring!

  • @andrewj5998
    @andrewj5998 11 месяцев назад +24

    We live in a second floor apartment of a suburban house. My "workshop" is a 9 x 11 foot bedroom that doubles as my office. My "workbench" is a steel desk that I raised and modified myself so I can clamp things down. I even attached a front mounted vise. In it, I store my hand saws, chisels, sharpening stones, and wood planes. The closet is full of power tools and a pegboard on one wall holds most of my hand tools. I have a benchtop drill press and a set of Forstner bits sitting on top of a two drawer file cabinet, a circular saw, a jig saw, several sanders, an angle grinder, a Dremel, and several drills. I do most of my cutting and sanding on the driveway on account of the dust, but I do have a Rigid shop vac for work done upstairs. The biggest PITA is dragging all my tools and materials up and down the stairs. My best addition was a Craftsman contractor table saw that I got at a garage sale for $25 and a folding 1980s era B&D Workmate that I picked up at another yard sale for $20. I built a router table with an adjustable fence that drops into the Workmate.
    I built two oak desk hutches, three poplar bookcases, a king sized oak headboard with decorative cast iron panels for our bed, a kitchen storage cabinet /china closet, a 7 foot tall playground for our cat, and more small decorative and functional projects than I can list. My dad taught me that you don't need a huge workshop or expensive branded tools to get lots of work done.

    • @colonelJ77
      @colonelJ77 Месяц назад

      Nobody cares

    • @andrewj5998
      @andrewj5998 Месяц назад

      @@colonelJ77 LOL Obviously you cared enough to reply to a comment made 10 months ago, you clyster-pipe.

    • @andrewj5998
      @andrewj5998 Месяц назад

      @@colonelJ77 LOL Yet you cared enough to comment, you clyster pipe.

  • @lazygardens
    @lazygardens 11 месяцев назад +44

    My main "workshop" was under a tree on bare dirt for quite a while. I've upgraded to the cement slab outside my garage.

    • @SiAnon
      @SiAnon 7 месяцев назад +2

      Mine is weather permitting too lol

    • @coffeebuticed
      @coffeebuticed 3 месяца назад +1

      Man, you gotta upgrade that shop!
      At least have two cinder blocks and a 2x6 for a good ol' bench.

  • @rommelrajagukguk822
    @rommelrajagukguk822 6 месяцев назад +6

    I just used hand saw, hammer, ruler, nails and sand paper to build my own dining table. Power tools indded a good stuff to most of us, but for me it's not about the tools, it's about the man behind the tools.

  • @JGV_IX
    @JGV_IX 11 месяцев назад +24

    This channel is absolute GOLD and is undoubtedly the most essential tool in my workshop! Thank you so much for everything you taught us!!

  • @richardhaas1989
    @richardhaas1989 11 месяцев назад +2

    So many videos so many hours of people discussing when to take glue off! I am glad see that in two seconds you tell everybody he exact right time to take it off. When it’s rubbery!

  • @disqusrubbish5467
    @disqusrubbish5467 11 месяцев назад +7

    I'm the guy who keeps saying most people don't need a $1500 track saw. Thank you for proving my point. The Bora system looks good.

    • @dreizenit7758
      @dreizenit7758 3 месяца назад +1

      it would be nice/convenient to have a track saw but it's not worth the price... you don't need it. just a circular saw and a make up fence. i would rather have a small jointer or a bandsaw than a track saw.

  • @tireballastserviceofflorid7771
    @tireballastserviceofflorid7771 11 месяцев назад +5

    I'm a welder mechanic for the most part. But I do have a bit of a thing for wood. Recently I started building bee boxes with blind dovetails. Used my cordless saw and a cheap plastic saw guide from the blue place. Did the first 3 boxes totaling 9 10 inch tall supers. All on my tailgate and 3 sawhorses. Dados, rabbits, and dovetails. I have a lathe in my shop and can't have the sawdust on it. Anyway with some dynamic thinking anything can be built anywhere.

  • @BruceWSims
    @BruceWSims 11 месяцев назад +17

    I am nowhere near your level of expertise in wood-working, but as someone who haunts a lot of these "workshop video-s" I wanted you to know that minute-for-minute Your videos contain More usable information than easily 3/4 of the available resources. Thank you for respecting your viewers as intelligent and invested in improving their skillsets. Thank you for providing tips and information that are actually applicable in inproving that same skillset. Thank you for not touting some latest fad or gadget. I have yet to watch one of your offerings and had to wade through waves of redundancy, "clever" dialogue and background music. I don't do a lot of "critiques of YT videos but I wanted you to know that your efforts are thoroughly appreciated as you provide a top-notch experience. Best Wishes.....😊

  • @BenjaminMellor
    @BenjaminMellor 10 месяцев назад +5

    Here some tips I have. Let the wood sit out for around a week or more to let it warp how it wants. Then you can get a handplane to flatten it out. Handplanes are pretty cheap, and you can also get cheap sharpening stones for sharpening the blade.

  • @chrisanthony579
    @chrisanthony579 11 месяцев назад +8

    In my Vocational Technical Carpentry class (in the early 80's) second year students made a framed kitchen cabinet using only hand power tools and hand tools. I started hobby woodworking with a circular saw, aluminum straight edge, router, belt sander and palm sander. I think those methods and skills helped me a better stationary tool woodworker today. I can't remember the last time I used primarily hand tools to build anything. I'm a fan of Stumpy but how many and how often does he use the tools in his background? Not being critical but pointing out that we have changed the way we work.

  • @tatehogan5685
    @tatehogan5685 11 месяцев назад +5

    I picked up the bora rip guide from my local big box store as a clearance item and just the rails. My mind was blown that there are actually accessories for this thing! I just ordered the saw plate, i had previously just run my saw along the edge with marginal results. Thanks for this stumpy!

  • @rjlavallee3575
    @rjlavallee3575 11 месяцев назад +3

    Always appreciate your videos. I don't make furniture, but am a boatbuilder. Have been doing the work with what many people would consider sub-standard tools (my table saw is a $99 Ryobi contractor saw I placed in a cabinet for support on the sides and outfeed), and have been building parts out of everything from cheap pine to 16/4 purple heart and white oak. The game changer in my shop was a Dewalt 12" compound miter saw: amazing what you can do with a really good and large miter saw. And I've been using the Bora straight edge without the attachments for years. Clamp, Skilsaw, and go. I'm getting ready to buy a mid-level cabinet saw, but will miss the pride of sitting back, looking at a piece of work, and saying "I did that with just these tools."

    • @TheUbiquitousNomad
      @TheUbiquitousNomad 5 месяцев назад

      That's awesome to hear! I have the same DeWalt miter saw and I definitely feel like I'm under utilizing it sometimes....do you have any examples of specific techniques and options that the 12" DeWalt miter opened up for you?

    • @rjlavallee3575
      @rjlavallee3575 5 месяцев назад

      @@TheUbiquitousNomad Having the ability to repeatedly and precisely cross-cut 10" wide, 4" thick material with a jig did it for me. The greatest ROI was setting up a jig to cut round circles out of 8" wide by 3" thick material which became dead-eyes and reeving hearts for use on the Boston Tea Party Ships in Boston. The material was just way too thick for my band saw to handle.

  • @gerrym4377
    @gerrym4377 11 месяцев назад +2

    I started out watching the popular woodworking channels about 2015 when they made relatable projects in relatable workshops but got bored once they transitioned to huge, essentially commercial workshops build on their new ranches or massive properties, building things in ways that just didn’t relate anymore. Good luck to them and I wish them every success but at that point the entertainment or even education was gone for me so I unfollowed most of them. You however are one of the epitomes of keeping it real and that is amazing for people like me with ‘ordinary’ garage size or smaller modest workshops, thank you 😊

  • @G.I.JeffsWorkbench
    @G.I.JeffsWorkbench 11 месяцев назад +2

    Thanks for reminding us that you can often build with tools you have. It might take a bit longer, but you’ll still be proud of the results. Our great grandfathers often didn’t have fancy tools, but many of the pieces they made are still in use today. I continue to appreciate your humble presentation style. I’m sure that you’re a more skilled craftsman than I am, but your presentation style lets me focus on your topic. It sure beats the alternative! Thank you.

  • @cdzrocks
    @cdzrocks 5 месяцев назад

    Never woodworked in my adult life but this video makes me want to give it a shot. I love your tutorial and advice and attention to detail to have nice clean work.

  • @nicksoehren4812
    @nicksoehren4812 4 месяца назад

    I left my job as a finish carpenter and went into trucking locally. Well after two years I’ve missed working with my hands and I’m building out my shop, luckily I only need three or four tools left. But I’m working out of an 8x8 shed I will set my saws up outside but I know the space will do just fine. Also you don’t need the fancy tools, I never judge a person on their tools it really comes down to the user and their knowledge on how to use said tools.

  • @notyou6674
    @notyou6674 11 месяцев назад +2

    that is an excellent video idea, youtube needs more dense high quality content like this

  • @brianfuller5157
    @brianfuller5157 8 месяцев назад

    I've been building great projects for years using stock wood, and basic power tools on my patio. I always felt like kind of a unsophisticated goof, and wished I had the resources, space etc to have the fancy stuff. I got over it, but thanks for this video. It reinforces that you can build great stuff with just a little money and ingenuity

  • @denverflatpackjedithornton
    @denverflatpackjedithornton 11 месяцев назад +2

    I've been meaning to post on your channel for a while... And I've only got about 60 seconds into the video but as somebody who also shares tips and tricks with their team and mostly goes unappreciative.... THANK YOU AND I DO APPRECIATE

  • @glencrandall7051
    @glencrandall7051 11 месяцев назад

    I don't usually do much cabinetry but Having just moved into a new shop I am going to have to build several cabinets. Using the tips in this video will ensure that I get good looking joints. And they should make the project easier to complete too. Thank you for sharing. Have a great day and stay safe.🙂🙂

  • @davidt8438
    @davidt8438 11 месяцев назад +1

    Mr. Nubs, thank you for the tips and information. I really appreciate the fact that you give accurate information instead of trying to show off like many others do during their presentations. I always find your laid back approach to be calming and informative. I just wanted to let you know your approach is a big help.

  • @nattydj8646
    @nattydj8646 11 месяцев назад

    fantastic. affordable tools and an emphasis on technique. excellent.
    so glad to see this one because this is how MOST of us get started and how MANY of us continue to work -- makeshift table, in the backyard, driveway or patio, with mostly or completely hand held power tools.

  • @user-yx4wx4oq4g
    @user-yx4wx4oq4g 11 месяцев назад +1

    2 weeks ago i bought a circular saw and thought it was the worst tool ever after trying to cut perfectly, im super glad you posted this cos this edge guide is exactly what i need

    • @nicholaslutz4
      @nicholaslutz4 9 месяцев назад

      I had a similar issue, but I came up with my own solution. I have Aluminum L angles that are 1 inch wide, which is the same width as the guide edge to the blade edge.
      allows me to clamp them on each side and I get a great guide. allowed me to save a little money so I can afford better accessories and up my game.

  • @KennethDrake-u6o
    @KennethDrake-u6o 2 месяца назад

    Tons of good tips for us small shop guys. Thank you!

  • @Buddygold9509
    @Buddygold9509 11 месяцев назад +8

    In 1958, my dad built the home I grew up in. He used nothing but hammers, Sears circular saw, and a square. Sits on a slab with brick front. 65 years later it’s still solid and standing.

  • @bobmartin6055
    @bobmartin6055 11 месяцев назад +1

    Great tips that proves one doesn’t need 5 grand in 3 Festool tools to make a project.
    Thanks ever so much for sharing your knowledge!

  • @jsed8399
    @jsed8399 6 месяцев назад

    I don't do woodworking often but when I do I only use festool!

  • @Brian-dr2yi
    @Brian-dr2yi 11 месяцев назад

    1 key point you left out. The huge advantage of building it yourself it making it fit perfectly into your space. Great video!

  • @jingles307
    @jingles307 11 месяцев назад +11

    As an apprentice cabinetmaker 45 years ago I had to make a cabinet with just hand tools. No power tools or mechanical fasteners.

  • @rangersmith4652
    @rangersmith4652 11 месяцев назад +4

    I remember many years ago watching The New Yankee Workshop on TV with my dad, and saying something like, "Can Norm make something without his variable-ratio, side-mounted, speed-adjustable metric dado jig?" So many current woodworking channels on RUclips make me have exactly the same thoughts.

  • @John-d7p
    @John-d7p 2 месяца назад

    In 97 I built a 1000 sq ft shop with 12 ft ceiling, all finished and such. To this day, Ioften set up a couple saw hoerses outside because I don't like the cleanup. The saw dust just gets swept or blown off into the adjacent grass. I've built a few basic jigs and use an old 6" Porter-Cable Saw Boss, a couple of good routers, and an old Craftsman jig saw made by Ryobi in the 70's. In bad weather I go inside, but yeah, outside with a few clamps and saw horses has been just fine.
    The shop was used to build small fishing boats, sheathed in epoxy and glass.

  • @C-Mah
    @C-Mah 4 месяца назад

    Great tips. I like the straw trick for glue squeeze out as well.

  • @christopherharrison6724
    @christopherharrison6724 11 месяцев назад

    I love learning the technique’s and joints that way I can translate to any project.

  • @Hammster_MCR
    @Hammster_MCR 11 месяцев назад +1

    Of course you can! I designed and built a bunk bed for my son, using only non-power tools, like handsaw, hammer, screwdrivers, etc.
    The only mechanical tool I used was a battery powered drill, for drilling and screwing some screws in 😊

  • @griffith0216
    @griffith0216 6 месяцев назад

    Great video, one of my favorites for guys like me trying to use simple tools in the back yard

  • @tarcorfd8547
    @tarcorfd8547 11 месяцев назад +1

    I have 36 pipe inch clamps. One project needed 48 inch clamps. I went to the hardware store, bought 12 inch pipe and couplers, made up 48 inchers.

  • @AllodialTitle
    @AllodialTitle 11 месяцев назад

    I can't remember the last time that I used my circular saw, I bought the dewalt jobsite saw about two years ago. It has transformed the way I work.

  • @katherynlamarche7308
    @katherynlamarche7308 11 месяцев назад

    I sure hope you do not stop doing these I watch all of them. Julien

  • @spruce1509
    @spruce1509 11 месяцев назад

    Thank you! I've been getting a little tired of beginner projects that start on a table saw

  • @johnwhitley2898
    @johnwhitley2898 9 месяцев назад

    Great looking Hall Tree!
    The work can be done with a few simple tools and that extra care with those simple tools!
    I went out to My "Carport Workshop" and with the same assorted mess of hand tools and built several items of furniture. It was fun and a great learning experience once again.

  • @JustAnotherDayToday
    @JustAnotherDayToday 10 месяцев назад +37

    Drives me crazy when RUclipsrs with million dollar shops describe “easy” projects-well yea if we had all the best tools, raw materials and all the time to make projects “easy.”

    • @polfigurski6900
      @polfigurski6900 4 месяца назад +3

      I know. I watched recently a 'projects you can do in an hour' video and the first thing the guy has done was putting a board through a table planer, or something like that.

    • @usagi_t
      @usagi_t 4 месяца назад

      I love good tools and fancy workshops, but those are clearly in advanced category.

  • @chaotician23
    @chaotician23 7 месяцев назад

    I had no idea that the Bora system existed, I've been using a length of CLS as a saw guide, this is going to make my life so much easier

  • @stevestapelberg9163
    @stevestapelberg9163 11 месяцев назад

    This video is another good example of why I enjoy your channel so much.
    You have saved me tons of time and money, in addition you've taught me things that would've taken years of trial and error to learn.
    Thank you for doing so, it's very much appreciated.

  • @rinzler9775
    @rinzler9775 10 месяцев назад +3

    Films this video from a fancy woodshop....😊

    • @StumpyNubs
      @StumpyNubs  10 месяцев назад +3

      Ignores that the project was made out in the driveway...

  • @heroJames391
    @heroJames391 11 месяцев назад

    absolutely love this. I wish I had this video when I first started woodworking. It makes you appreciate where one was and now is as a woodworker. I still have things in my house that were built on the garage floor with a crappy jobsite table saw and an imagination. Thank you Stumpy Nubs!

  • @interman7715
    @interman7715 8 месяцев назад

    I have been building houses and doing basic joinery for thirty years with a few basic tools and had no problems. Less is more .

  • @oafkad
    @oafkad 9 месяцев назад

    Your videos are incredible. This is the kinda quality that I aspire to. They are so pleasant to watch.

  • @piccalillipit9211
    @piccalillipit9211 11 месяцев назад +3

    *YES I AM SICK OF FANCY WORKSHOPS* I dont do woodwork any longer but I still like to watch videos, there is no joy in watching a guy MANUFACTURE an item in a $500k workshop.
    This is why I like Rex Kruger - 3 hand tools to make a stool - stuff people can actually make and get into the hobby / profession.

  • @iguesi
    @iguesi 11 месяцев назад +3

    Great tips and insights. You showed several things that I never thought of... for dados it's okay to be a little deeper in the middle... chamfer the edges for an easier fit...
    I did know about the "cottage cheese" glue... but I didn't have a name for it. :)
    Thank you!

  • @edwinlikeshistractor8521
    @edwinlikeshistractor8521 11 месяцев назад

    Thank you. The blue tape tricks are wonderful. I will be using them tomorrow.

  • @RPSchonherr
    @RPSchonherr 11 месяцев назад

    That one hint about the glue is probably the best one you can give. I've seen RUclipsrs wipe off the excess. Every time I've done that to a piece I was planning on staining I kick myself. Stain will not work where glue has sealed the wood. If for some reason you let it harden you'll have to use a scraper. The one thing to be careful of is using so much glue that it drips down your work. Not only is it hard to get off but also seals the wood requiring a lot of sanding. One fellow had the great idea of using masking tape to prevent glue drips from sealing the wood.

  • @MrRustyjackson
    @MrRustyjackson 11 месяцев назад +2

    Since I don't have a fancy shop or fancy tools I enjoyed watching this video. It kind of positively reinforces some methods I regarded as a poorman's method. Example: Although it can be fun to watch Festool Domino videos, I limp along with my Jessem dowel jig. I always appreciate your videos since they actually help me vs some that simply entertain.

  • @handlesarestupid1234
    @handlesarestupid1234 11 месяцев назад +3

    I found that the Bora system wouldn't clamp properly to my circular saw. So I use the straight edge only. Love the idea of making projects with tools that us common folk have. Thanks for the content.

    • @StumpyNubs
      @StumpyNubs  11 месяцев назад +5

      They improved the clamping system with their newer NGX saw plate. It works with the older fences, too.

    • @johnnichols8553
      @johnnichols8553 11 месяцев назад

      I had the same problem, even using the newer NGX saw plate. I absolutely could not get the plate to NOT move relative to my circular saw. The slightest pressure and it would shift, ruining all the time spent aligning the plate to the base. I now use only the straight edge, and cut a spacer piece to put between my pencil line and the edge of the straightedge. I built a whole vanity this way, works fine.@@StumpyNubs

  • @trianglewhips
    @trianglewhips 8 месяцев назад +1

    You said you had a clamping issue for the back part which rocks forward when you clamp the front. Same here. I use strap clamps having the ratchet on the back side which has more tension. If the edges are soft for a strap, use angle aluminum, polish the outer corner side rounder. It works 4 me. And I have a tiny place as a [shop]...

  • @emarr3720
    @emarr3720 10 месяцев назад

    I don’t have a shop with lasers & photon torpedos but I do have table & miter saw. Even so, I find myself using my Bora products a lot bc of the ability to cut IN SITU. I don’t want to bring huge unwieldy and/or heavy plywood sheets to the shop saws & have to heave ho after I’m done cutting. For instance, I was reroofing a huge shed & needed to replace some plywood sheets & cut everything on the roof saving me a lot of effort.

  • @Justin-fb7ni
    @Justin-fb7ni 11 месяцев назад

    i started in wood recently, with only a small apartment to work in, and I quickly realized hand tool woodworking is seemingly 100x harder than using fancy machines. I wish I had learned this before hand and I probably would have cursed a lot less as I went. I am still keeping at the hand tool working though, and it gets easier everyday. can't wait for the day I can start occasionally using the fancy machines though.

  • @arrowdriver
    @arrowdriver 11 месяцев назад

    Thanks for the build with common tools. Once again your channel is most useful. Like other you tubers who forget where they came from.

  • @robertdevoid8345
    @robertdevoid8345 11 месяцев назад +2

    Starting with the minimum tools makes you appreciate what you have when you do have better tools

  • @1lllllllll1
    @1lllllllll1 5 месяцев назад

    The salt trick, wow that was a hidden gem! Thanks!!

  • @aaronschocke2147
    @aaronschocke2147 7 месяцев назад

    Ironically enough, I am building a library full of bookshelves with 5/4 alder done essentially the same way. I was nodding along with you the whole way 😂 the exciting part is that every single bookshelf is called out in the plans to be unique in size, and shelf pattern. The cutlists alone will make your head spin....just wait until you have 32 shelves and two stantions to sandwhich between two bulkheads spanning 12' all at once...talk about some serious clamping madness. 😂 Oh, and did I mention that some of them are at angles to match a tapered stone fireplace? Mercí! 😂

  • @cynicallyskeptic4295
    @cynicallyskeptic4295 11 месяцев назад +1

    Yet another awesome video from, what is my not-so-humble opinion, the best woodworking channel on youtube.

  • @multioptipupiloptomy
    @multioptipupiloptomy 6 месяцев назад

    True story. Thanks for the vid! The day I've stopped watching 3x3 customs was when the cnc router came into the picture, and the new table saw, and ...u name it what :) Btw if I can add one thing here: under my journey I've learned to use the circular saw with a diy track. Works like a charm. I've underrated this tool for no reason. I guess because table saw for beginners is more safe than circular saw in general. But circular saw - if it's good (or track saw) is way more versatile

  • @willchoate7072
    @willchoate7072 11 месяцев назад

    I'm 67 and have been doing woodworking since I was about 10. After I retired 10 years ago I started building and selling furniture to supplement my income. I have some great tools like the Bosch articulated miter saw, $600 on sell 5 years ago. Worth every penny. I also have a harbor freight 33 inch wood lathe that works great for table legs. I have a lot of old antique and vintage tools. A lot of tools I bought used. If you do your homework...ie... research, you can over the years come up with a shop that you can build anything with. Name alone doesn't matter much to me.

  • @sgsax
    @sgsax 11 месяцев назад

    Super cut of practical tips? Don't mind if I do. Thanks for (re)sharing!

  • @regiondeltas
    @regiondeltas 11 месяцев назад +1

    Okay okay, youve got me. This might be the video that makes me turn my house bashing diy hand to a bit of furniture making

  • @tpleus
    @tpleus 11 месяцев назад

    Hey!!!!! Woodworking on a woodworker channel! Thanks Stumpy Nubs! Great video full of super useful info from a real woodworker!

  • @coolivato
    @coolivato 11 месяцев назад

    This video is pure gold! So many useful tips!

  • @isaacplaysbass8568
    @isaacplaysbass8568 11 месяцев назад

    I loved those old videos; fond memories :)
    Great a idea to consolidate the tips & tricks too :)

  • @jefff6167
    @jefff6167 11 месяцев назад

    Thanks for taking the time to create this very helpful video. 👍🇺🇸

  • @troygoggans5495
    @troygoggans5495 9 месяцев назад +1

    Something that has happen to my watching how-to-projects for wood workers. First the amount of technique blogs has exploded and some that are contradictory. Even if I wanted to try all the techniques there is not enough time in a life to get to them all. And the other is jig making blogs, after making numerous jigs I realized that I could not make the same quality jigs as I could buy no matter how careful I was during fabrication. I do still watch your blog and two other woodworking blogs but I have to say I only watch one episode of each blog per month or 2. As an example things like finish sanding, staining and sealing the videos would only show the techniques using flat boards how many projects have a flat board not connected to anything else.

  • @anitamontgomery5360
    @anitamontgomery5360 4 месяца назад

    Thank you! After my lasy build, I swore I was going to get a plunge saw, but just can't bite the bullet on that much $$. The Bora twin rail rip guide is doable, though!

  • @riangarianga
    @riangarianga 11 месяцев назад +1

    Lots of great tips, much appreciated!

  • @Andrew-rv1xq
    @Andrew-rv1xq 11 месяцев назад

    Thank you Mr.Nubs.

  • @olddawgdreaming5715
    @olddawgdreaming5715 11 месяцев назад

    Thanks for sharing with us James. That's a great project. Fred.

  • @thyroid99
    @thyroid99 7 месяцев назад

    "...So today I'm taking all the best tips and tricks and I'm condensing them into a shorter video."
    And subbed! thank you! I'll still check out the longer video too.

  • @sullyprudhomme
    @sullyprudhomme 11 месяцев назад +1

    Great video...I get about 1 minute into those 'a simple way to build a bed' and the person has a planer, a massive (non portable) table saw, and a whole host of other equipment...thanks!

  • @garymiller5937
    @garymiller5937 11 месяцев назад

    Thanks for the tips Stumpy. Especially for those of us without all your tools the tips are invaluable! 😊😊😊❤❤

  • @thetomster7625
    @thetomster7625 5 месяцев назад +1

    Couldn't agree more. If you want to start out in this hobby, just start out. take a saw, a hammer and a chisel and then grow from there... buy pro-tools so you will have fun with it, but don't buy 'em all together and before you start. just one by one over years - if needed - and as for the example, I agree, too: with a circular handsaw you can do almost everything you would with a tablesaw...

  • @21wdwrkr
    @21wdwrkr 11 месяцев назад

    I had a carpentry/cabinetry business for forty years and have never heard of putting salt on a glue joint. I gotta try that.

  • @dian3145
    @dian3145 11 месяцев назад

    I don’t have the space for a hall tree, so I would have skipped it. Distilling the tips was brilliant!
    Thanks much!

  • @jonq8714
    @jonq8714 11 месяцев назад

    Certain tools make projects easier to execute, but in their absence it doesn't make projects impossible. There's always a way.

  • @staceyhill846
    @staceyhill846 11 месяцев назад

    Thank you for making this!

  • @twfc7
    @twfc7 11 месяцев назад

    Great tips Stumpy. Always appreciated.

  • @patrickbuswell
    @patrickbuswell 11 месяцев назад

    Stumby numbs premium content here. These are your best types of videos, unlike the one fighting your comment section we saw previously. Keep up the great video sir. Thank you

  • @UniquelyUbiquitous-yg3xl
    @UniquelyUbiquitous-yg3xl 6 месяцев назад

    Stumpy deserves a million followers!

  • @Stratocast83
    @Stratocast83 8 месяцев назад

    This was an awesome video with great tips and tricks 🔥🔥🔥
    Being new to woodworking keep the videos coming 👍

  • @ohiomoto
    @ohiomoto 11 месяцев назад +1

    Did I just watch the "Fastest 10 Minutes" of Woodworking? Nice!!

  • @wayneledford5131
    @wayneledford5131 11 месяцев назад

    Great condensation James!

  • @norm5785
    @norm5785 11 месяцев назад

    Awesome information..thank you for sharing. Everyone stay safe, warm, happy and healthy. From Henrico County Virginia